mud agitator vs desander supplier

Fluid Systems mud agitators are designed to mix and suspend the solids using axial flow, promoting low particle size degradation and effective polymer shear. Unlike mud guns, the FSI mud agitator is relatively a low energy device, easy to operate and inexpensive to maintain. Our standard horizontal and vertical mud agitators range in 5 to 30 horsepower with an explosion proof motor and gear reducer. We size mud agitators according to the configuration and maximum mud weight.

Derrick mud agitators include an explosion-proof, “C” faced motor, reduction gearbox (helical-bevel gears for horizontal agitators or all helical gears for vertical units), impeller, and shaft with assembly bushings. Motors range from 5 to 30 HP and may be supplied in several power configurations.

Attaching the motor directly to the gearbox protects correct alignment that can increase bearing life and provides 95 percent efficiency in power transfer to the impeller. Using this superior design surpasses standard worm drive gear assemblies by 30 percent, allowing Derrick agitators to do the same work at far less horsepower. By unitizing the motor and gearbox, weight and space requirements are reduced. Horsepower, mechanical configuration, impeller diameter, and shaft length are customized to tank dimensions and maximum mud weights. Available horsepower ratings* are: 5, 7.5, 10, 15, 20, 25, and 30.

KOSUN MA series mud agitator is part of the drilling fluids solids control equipment, which is mainly used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fluids.

Tags:mud agitator,agitator,hydraulic mud agitator,oilfield mud agitator,drilling mud agitator,oilfield drilling mud agitator,mud agitator for mud tank,Tank Mixers Agitators,mud pit agitator, api mud agitator, horizontal mud agitator, agitator mud system.

GearBox is a crucial part of mud agitators. Mud agitators are used in surface mud system to suspend solids and maintain homogeneous mixture throughout the system.

Mud agitator was one of solids control equipment and has two main type: verticle agitator and horizontal agitator. It is very important to select optimum gearboxes for various applications of drilling project or other mud treatment.

In the past, horizontal agitators mainly use worm gear unit for cost reason. But worm gear easy to broken and mantainance is difficult. you have to open shell to grease gear.  Now horizontal mud agitator use helical-bevel gears ( like derrick agitator ).  Helical gears have a smoother operation due to the angle twist creating instant contact with the gear teeth. Rigid tooth flank helical gear unit are advanced of helical gears.  Rigid tooth flank means more wear resistant and long life to use. So it’s trend to use rigid tooth flank gearbox.

Following is desander for two different industry and system, Part 1 two desanders are for oil gas drilling, CBM drilling mud solids control. Part 2 desander system with mud tank is for contruction operation for No dig, Bored Pile drilling deander for bentonite recycling.

GN desander is the second class and the third class solid control equipment to treat the drilling fluid. According to the size of the cone diameter, it is divided into Desander andDesilter. Usually the cone diameter is more than 6″is called Desander, and used as the second-control equipment in drilling operation. We commonly used 8 "and 10" cones desander to separate solid-phase particle size 47-76μm in the drilling fluids

The GN Mini Mud Cleaner is innovative products for drilling fluids cleaning. The traditional desander desitler without Shale Shaker is only available for unweighted drilling mud.The traditional mud cleaner is oversized for some applications,and the mud cleaner is relatively more expensive. The innovative GN Mini cleaner is an ideal option for both weighted and unweighted drilling mud with the most cost effective solution for drilling. Further more, the GN Mini Cleaner is the best choices for small mud system for HDD,CBM, water well drilling, mining exploration industry etc.

Hydrocyclones is also called cyclone separator.Hydrocyclones consist of desander(10 in. cone) and desilter(4 in. cone)are drilling rig equipments with a set of hydrocyclones that separates sand and silt from the drilling fluid. Desander is installed after shakers and degasser but before desilter. Desander removes those abrassive solids from the drilling mud which cannot be removed by shakers.

Desander, as stated earlier, have no moving parts. The larger the internal diameter (ID) of the desander is, the greater the amount of fluid it is able to process and the larger the size of the solids removed. Desander (10 in.cone) are able to remove roughly 50 percent of those solids within the 40-50 micron range at a flow rate of 500 gallons per min (gal/min), while desilter (4 in. Cone) are able to remove approximately 50 percent of those solids within the 15-20 micron range at a flow rate of 60 gal/min. Micro fine separators are able to remove around 50 percent of those solids within the 10-15 micron range at a flow rate of 15 gal/min. Desander is typically positioned next-to-last in the arrangement of solids control equipment, with decanting centrifuge as the subsequent processing unit. Desander are preceded by gas busters, gumbo removal equipment (if utilized), shale shakers, mud cleaner (if utilized) and vacuum degasser.Desander is widely used in oilfield drilling.

Bored piles are cast in place cylindrical piles excavated either by use of rotary equipment operated augers , buckets, under static drilling fluid or large drill bit (for hard rock) with reverse circulation.The reason to use desander unit is that Bored piles installed in common soil with the presence of water table, generally require the use of a short temporary steel casing and a drilling fluid as static suspension to provide support to the surrounding soil while excavating the pile and until complete backfill of the pile excavation with concrete, in order to prevent cave-in of the excavation and destabilizing the surrounding soil formation.GN Bored Pile desander is to separate the sands from the drilling fluids and recycling the drilling fluids for use.

GN is a China desander manufacturer with location in Houston, USA, and partners around the world.,solids control systemdesander,drilling fluids,drilling fluids desander..Your best solids control service!Your best Hydrocyclone Desander for drilling mud circulation system.

JBQ series mud Agitator, Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW.The drilling mud agitator is an important components for GN Solids Control drilling fluids processing system.

GN Solids Control as a professional manufacturer for soilds control equipments, we have designed lots of high-quality products, and JBQ series Agitator is one of them. To keep both the mud uniformity and the suspension of solids, the mud agitator is used to agitate the mud consecutively and reliably.This agitator agitates the mud to make cuttings, silt and sand pass the solids control system without being precipitated onto the tank bottom. Due to the simplex turbine decelerator, this product is featured by compact construction, light weight, balanced transmission, low noise, high efficiency of transmission and strong agitating power. Therefore, it is a reliable product in the solids control system.

China manufacturer GN Solids Control offer the world with drilling mud agitator equipments.We are an exporter of drilling fluid mud agitator for Indian, Russian,middle east.etc..Our factory and company are Quality Management System ISO 9001-2000 certified.GN Solids Control operate international oil gas drilling mud separation system sales,service,manufacturing,distribution serivce.Buy drilling fluid mud agitatorfrom China manufacturer.Your best mud agitator for drilling mud circulation system.

Mud Agitator Price is composed of two parts, one is the Mud Agitator Power you will use, and the other is the material of the impeller and length of the impeller. So if you want the details of Mud Agitator Price, you need to provide your use and requirements. How much power is needed and your deepth of mud tanks.

Brightway is the famous mud agitator manufacturer and mud agitator supplier in China. and have more types mud agitators used in the mud tank of drilling mud system or other industry. such as 5.5KW 7.5kw 11kw 15kw mud agitators, or Horizontal Mud Agitator and Vertical Mud Agitator for Mud tank. Gear driven, Advanced impeller designs, Good Packed and delivered quickly. At present, Brightway BWJBQ series mud agitator had been exported to 40+ countries and service for many coustomers. Competitive Prices of Mud Agitator and good sevice is the importent factor.

If you want kown the Mud Agitator Price, please send your request to Brightway Email ( brightway@bwwell.com ) and our sales engineer will give you an Competitive Prices offer as soon as possible.

Oil ang gas drilling (Drilling mud recycling system, drilling waste management, comprehensive disposal for oil sludge, mud comprehensive treatment station, barite recovery system etc.)

Infrastructure construction (HDD mud purification, pipe jacking / TBM slurry circulation, slurry for continuous wall construction’s separation, and mud of pile foundation engineering’s treatment, etc.);

Leading Manufacturer of Drilling Mud Cleaner, Hydrocyclone Desander, Mud Agitator, Balanced Elliptical Motion / Linear Motion Shale Shaker and Shale Shaker Screen from Jodhpur.

JOT manufacture Mud Cleaner which is the first-stage solids control equipment in the drilling fluid solids phase control system, and separates a large amount of cuttings carried by mud from wellhead, facilitating mud to enter the second-stage separation equipment. JOT manufacture both two stage (Shale Shaker + Desilter) and three stage (Shale Shaker + Desander + Desilter) mechanical process Mud Cleaner.

Desanders are solid control equipment with a set of hydrocyclones that separate sand and silt from the drilling fluids in drilling rigs. Desanders are installed on top of the mud tank following the shale shaker and the degasser, but before the desilter.

A Mud Agitator is used in surface mud systems to suspend solids and maintain homogeneous mixture throughout the system. A mechanical agitator is driven by an explosion-proof motor, coupled to a gear box that drives the impeller shaft. The impellers (turbines) transform mechanical power into fluid circulation or agitation.

Mud Agitator Price is composed of two parts, one is the Mud Agitator Power you will use, and the other is the material of the impeller and length of the impeller. So if you want the details of Mud Agitator Price, you need to provide your use and requirements. How much power is needed and your deepth of mud tanks.

Brightway is the famous mud agitator manufacturer and mud agitator supplier in China. and have more types mud agitators used in the mud tank of drilling mud system or other industry. such as 5.5KW 7.5kw 11kw 15kw mud agitators, or Horizontal Mud Agitator and Vertical Mud Agitator for Mud tank. Gear driven, Advanced impeller designs, Good Packed and delivered quickly. At present, Brightway BWJBQ series mud agitator had been exported to 40+ countries and service for many coustomers. Competitive Prices of Mud Agitator and good sevice is the importent factor.

If you want kown the Mud Agitator Price, please send your request to Brightway Email ( brightway@bwwell.com ) and our sales engineer will give you an Competitive Prices offer as soon as possible.

AIPU Solids Control is a supplier for solids control equipment as well as solids control spare parts. Some times it is hard to source spare parts because many supplier or manufacturer don’t have good record on it’s spare parts. AIPU supply shale shaker screen, centrifugal pump, mud agitator, vibrator motor, cyclone, etc.

Cyclone is the core parts for desander and desilter. There are cyclone 2”, 4”, 5”, 6”, 8”, 10”, 12” and 15” for option. The oil and gas drilling site normally use 4” and 10” cone work as desilter cyclone and desander cyclone. The cone is clamp connection for fast replace.

Other than above mentioned spare parts, AIPU supply centrifuge pump, mud agitator, valves, mechanical seal, impeller, etc. Please contact us for more details.

Explore the various drilling rig mud desander products available for wholesale at Alibaba.com. Get a drilling rig mud desander for drilling water wells, water exploration holes, geological exploration, coal mines, and other kinds of mining. Some drilling rig mud desander options use caterpillar tread to move. Others use rubber tires, while others require a separate means of transport. Caterpillar tread propulsion can climb up to 25 degrees inclination. Some products in the range are capable of drilling over 200 meters, while others are only used for open-pit mining with depths of around 3 meters. Drilling can be done vertically downwards, horizontally, or in a slanting direction. Drilling speed depends on the power of the machine and the general hardness of the surface. The hole diameter can vary from 90mm to 200mm.

drilling rig mud desander options also include an air compressor, a mud pump, drilling rods of various sizes, connectors, and a drilling tower. Drilling is done using drill bits of various shapes, sizes, and compositions. You can choose between diamond bits, alloy ring-shaped bits, 3-wing alloy bits, PDC bits, and hammer bits. Each drill bit uses different drilling methods, including rotary, percussion, blast hole, and core drilling.

Smaller products have a lifting power of around 25 kilonewtons and weigh about 2,500kgs. They’re ideal for small-scale drillings such as farms and homes. Larger ones are faster with more power, making them ideal for commercial use. Browse through Alibaba.com and find a drilling rig mud desander that’s ideal for your work scope. Buy mine drilling rigs for your wholesale business at competitive prices. Chinese wholesalers provide you with customization options and great after-sales services.