godwin mud pump in stock

The Godwin Dri-Prime 3″ (76mm) CD80D automatic priming centrifugal pump is a compact and highly maneuverable portable pumping system that can deliver a maximum of 350 gallons per minute (22 liters per second) and total dynamic heads to 93 feet (28 meters).

The Godwin Dri-Prime pump offers flow rates to 1010 USGPM and has the capability of handling solids up to 1.8″ in diameter. It is able to automatically prime to 28′ of suction lift from dry. Automatic or manual starting/stopping available through integral mounted control panel or optional wireless-remote access. Indefinite dry-running is no problem due to the unique Godwin liquid bath mechanical seal design. Solids handling, dry-running, and portability make the Godwin pump the perfect choice for dewatering and bypass applications.

The Godwin Vac-Prime is a highly efficient, automatic, self-priming dewatering solution suited to well-pointing. The new pump was unveiled for the first time at the Bauma trade show in April, in Munich, Germany.

Designed for easy movement and transport, Xylem’s Godwin Vac-Prime is compact and does not require specialist transport. With its lifting frame, fork pockets and optional wheels, it needs minimal on-site equipment. The speed of air evacuation that it delivers is due to a combination of the vacuum pump and the fast-priming system.

Godwin Vac-Prime 4 in and 6 in models can manage heads of 11-25 m, flows of 100-374 m³/h and solids handling of 45–75 mm. The fully automatic, self-priming pump is designed for a range of applications including draining canals, dewatering open excavations, basements, quarries, pumping water containing solids, pumping bentonite and drilling muds well as well-pointing.The pump comes with a durable, cast steel impeller to aid shatter-resistance.

The Godwin mechanical seals run in an oil bath which dissipates the heat allowing for dry-running without seals over-heating and cracking. The wet end Xylem’s Godwin Vac-Prime is based on the design of larger Godwin Dri-Prime pumps.

AdvantageAnderson ProcessArbortechBASFBig WipesBilly GoatBrunner & LayCapital SafetyCertified Safety (3M)ChapinColeman Cable,LLC (Southwire)Construction Electrical Products (CEP)Cox North AmericaCrick ToolsCST/BergerCustom Leather CraftDeWaltDryairDustless TechnologiesEagle IndustriesECCO Safety GroupEDCOEmpire LevelERB SafetyErgodyneEstwingFlygtFreudFranmar ChemicalFrost FighterGatoradeGodwinGreenleeHusqvarnaICSIglooIMERIrwinISOtunesJoboxKenson IndustriesKlein ToolsKraft Tool CompanyKrylonLift-AllLindley VibraStrikeLittle BeaverLouisville LadderLufkinMagnolia BrushMakitaMarion Brush CompanyMarshalltown CompanyMI-T-MMilwaukee ToolNorton ClipperPacific Laser SystemPIPPaslodePowers FastenersPrimeSourceRayovacReedRelton CorpRKISeymour MidwestSpectra PrecisionSpyderStabilla, Inc.Stanley BostichSterlingStihlSullairSurfa SlickSurface ShieldsTherma-StorToroTrakmatTREDSTrue Temper (Ames)VizconWacker NeusonWagmanWeiler CorporationWobblelightW.R. MeadowsZipWallGVSHONDA

We supply pumps for - Flood relief | Ground water control | Mine dewatering | Well point dewatering | Industrial sludge pumping | Emergency pumping | Sewage over-pumping.

All of our used pumps are fully tested and serviced to be in good working order. If necessary repainted to our standard red finish (other colour options available at extra cost).

Normally 3 month return to base warranty is given for used pumps sold within mainland England, Wales and Scotland excluding the following postcodes: FK, KY, PA, PH, DD and the Highlands. Please contact us for further details.

Please note that pump photographs on this page are for general guidance only and may not depict the actual pump offered. All ex-rental, ex-hire, pre-owned and refurbished water pumps supplied in excellent condition.

76mm solids handling capability and wet priming system ideal for industrial, flood relief, sewage by-pass, over-pumping and other commercial applications.

Each pump is fitted with a Hydovar variable speed drive allowing for contact pressure or flow rates varing between 10-70m and flow rates 1-11.75lps depending on set-up.

Mounted in a hushpac sound attenuated canopy with lifting frame, chassis integral bunded fuel tank, forklift pockets and engine mounted compressor for Godwin’s Dri-prime venturi automatic self-priming system.

Driven by a Deutz radiator cooled, electric start diesel engine model D2009L03. Mounted in a sound attenuated canopy with central lifting eye, chassis integral bunded fuel tank, and 25cfm vacuum pump priming system incorporating priming tank and non-return valve fitted on discharge.

Driven by a Iveco, radiator cooled, electric start diesel engine mounted on a skid base frame with central lifting eye, guarding and vacuum pump priming system.

Ideal for Emergency pumping services, Docks, ports and harbours, Refineries, Water and waste treatment, Local authorities, Offshore and float outs, Quarries and mines, Building and construction, Manufacture and industry, Power stations, Tunnelling, Agriculture.

Driven by a Isuzu, radiator cooled, electric starter diesel engine model 4LE2 mounted in a gull wing door sound attenuated canopy with variable speed throttle, central lifting eye, chassis integral bunded fuel tank and SPP’s vacuum priming system with automatic clutch to disengage vacuum pump when primed.

New SPP/Kirloskar horizontal spilt case pump with twin stage impellers complete with packed gland seal and stainless steel shaft. Fitted with 6” NP16 flanged suction and delivery branches.

Kirloskar 150mm x 125mm DSM 125-4 split-casing pump being two stage impeller manufactured in quality cast iron, bronze type wear rings, stainless steel shaft with multi ring packed glands and outboard bearing.

This pump is fitted with SPP Automatic Priming equipment with a 25CFM vacuum pump being oil lubricated. All mounted on robust chassis fuel tank frame with central lifting frame and fork lift pockets.

Ideal for site drainage, raw/process water, storm/flood water, emergency pumping, sewage over pumping, sludge, slurry, bentonite, viscous liquids and other industrial applications.

Driven by a JCB radiator cooled, electric start diesel engine model TC-63 mounted in a sound attenuated canopy with central lifting eye, forklift pockets, chassis integral bunded fuel tank and automatic self-priming diaphragm pump system.

Should you be stuck for power why not consider a diesel engine generator. This can be situated remote from the pump. Please note this can be offered at extra cost.

Fitted with Godwin’s high pressure bath mechanical seal design allowing for dry running for prolonged periods while automatically priming and re-priming with a compressor system.

Fitted with Xylems N-Impeller for improved solids handling of large soft solids or long fibrous material. Fitted with Godwin"s Dri-Prime ejector system enabling automatic self-priming suction lifts of 8.5m though 6m or less is recommended.

Fitted with Selwood’s water resistant diaphragm pump for automatic self-priming from suction lifts of 8.5m though 6m or less is recommended and a mechanical seal running in a oil bath which allows running dry without damage.

New and unused ETL50-1-120A in-line aviation fluid pump with 2” DN50 flanged suction and delivery branches. Close coupled to a ATEX approved Siemans, TEFC 3kw, 440v, 60hz electric motor.

New and unused ETL50-3-200A in-line aviation fluid pump with 1.1/2” DN40 flanged suction and delivery branches. Close coupled to a ATEX approved Siemans, TEFC 11kw, 440v, 60hz electric motor.

The pump type ETL (OH5) vertically in-line mounted, close coupled, radial split case, single stage, single suction, heavy duty centrifugal process pumps.

The design complies with the latest edition of the American Petroleum Institute standard "Centrifugal Pumps For General Refinery Services", also known as API 610/ ISO13709.

The in-line configuration is a compact pumping solution with mounting the impeller to an extended motor drive shaft presents a very compact pumping solution. The ETL (OH5) offers a space saving footprint and eliminates expensive baseplates. (This pump is also available in long coupled pump type ETLS (OH3) for high temperature applications)

The Spate 3B pump can handle dirty water, slurries, light and heavy oils. Can also handle petroleum industry products, including some of the more viscous liquids, at a high, non-turbulent flow rate.

These centrifugal pumps with closed impeller, feature a unique agitator design. This agitator lifts sediments into suspension, creating a slurry mixture and enables the continuous pumping of media with a high concentration of solids.

Robust construction, careful selection of materials and unique contour components have produced a pump with excellent abrasion resistance which, coupled with a low speed high torque motor, ensures long service life and economical operation.

LVA505 end suction pump with 6” flange suction and 4” flange delivery branches. Long coupled to a 45kw, 4pole, 415v TEFC electric motor mounted on a base frame with coupling guard.

New BP235K 6 stage diaphragm pump c/w safety relief valve belt driven by a Hatz electric start diesel engine model 1D90Z with at least 3 hour running integral fuel tank.

The unit is mounted on a skid base with forklift pockets and protective steel frame. The pump can produce between 162 and 222 l/m depending on engine speed at a constant 20bar pressure.

Nearly new Calpeda NM25/16AE Pump with 1.1/2 inch female BSP suction and 1 inch BSP female delivery connections coupled to a 1.5kw, 415 volt, 50hz TEFC electric motor.

Capable of a maximum flow rate of 3.6 m 3 / hr at a maximum head of 49.4m. This pump has a 1 / 4 inch BSP. Suitable for pressure boosting applications.

New - Unused Xylem / Lowara MP100.1/6A horizontal multistage Vogal pump with enlarged 8" flanged suction and reduced 3" Vitriolic discharge connection.

Long coupled to a 2 pole, 160kw, 50hz, 415v electric TEFC motor base mounted complete with coupling guards, valves fitted to both suction and delivery, along with a Mahle filter mounted on the discharge side of the pump.

Portable Submersible Pump & Hose Trolley built for customer to enable multiple bores to be sampled in multiple areas. Complete with panel for full variable speed control and ‘plug & play’ ease of use

Food Grade Neoprene or Nitrile impeller, Carbon/ceramic mechanical type seal, this unit can be used for the safe pumping of food grade products and materials.

Used Worthington Simpson 6L13 split case pump with 8” flanged suction and 6” flanged delivery branches. Long coupled to a 132kw, 50/60hz 2pole TEFC electric motor mounted on a base frame complete with coupling guard.

Please note that pump photographs on this page are for general guidance only and may not depict the actual pump offered. All ex-rental, ex-hire, pre-owned and refurbished water pumps supplied in excellent condition.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

The diaphragm operates in a balanced condition during the discharge stroke which allows the pump to be operated at discharge heads of over 200 feet (61 metres) of water.

The diaphragm operates in a balanced condition during the discharge stroke which allows the pump to be operated at discharge heads of over 200 feet (61 metres) of water.

The ARO Diaphragm Pump offers high volume delivery even at low air pressure. ARO pumps feature stall resistant design, modular air motor / fluid sections.

For sale we have a yellow chemical cabinet. This cabinet which has a lockable door and COSHH instructional documentation inside also has two ARO IR Intersol Pumps, Diaphragm Air pumps with a typical flow rate of 35gpm subject to air flow.

The Godwin Dri-Prime NC Series features extremely powerful yet compact pumps, empowered by the patented Flygt N-technology with its innovative self-cleaning hydraulics. NC Series provides non-clog pumping solution. NC series pumps are engineered to deliver sustained high efficiency resulting in lower energy and fuel costs while reducing unplanned downtime.

The Xylem/Godwin NC Series include Perkins, Caterpillar, Hatz, JCB and Deutz. Stuart Pumps have developed a 2 or 4 wheeled trailer (with or without pipe rack)*. This adaptation will be ideally suited for Local Authority and Environment Agency clients.

CD Series General Purpose, Solids Handling Dri-Prime® Pumps Total Head Total Head Capacity Total Head Total Head Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting...

HL Series High Head and Jetting Dri-Prime® Pumps HL80M 4" x 3" Capacity gpm Total Head ft Solids Handling Branch Sizes 440 420 400 360 220 100 150 200 250 300 Standard Engine HL4M 4" x 4" Capacity gpm Total Head ft 1000 900 700 575 450 150 200 300 350 400 Standard Mounting Length Width Height Net Weight Fuel Consumption Solids Handling Branch Sizes Standard Engine Standard Mounting Length Width Height Net Weight Fuel Consumption HL5MS Total Head ft Solids Handling Branch Sizes 1000 950 900 800 500 180 200 300 400 440 Standard Engine 1 3/8 in. 4" ASA 150 Standard John Deere 4045T 102 hp @...

Heidra® Hydraulic Submersible Pumps Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption PowerPack Pump Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Skid Base PowerPack Pump Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption PowerPack Pump Total Head Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Solids Handling Branch Sizes Standard...

What is Dri-Prime ? ® ■ A fully automatic self-priming pump. ■ Self-priming completely from dry with long suction lines. ■ Handles air/liquid mixtures. ■ Rapid priming and repriming in snore conditions. ■ Solids handling. ■ No moving parts in priming system - no need for floats and no complications. ■ Operation by unskilled personnel. ■ Simple maintenance - can be performed in the field by one person. ■ For dewatering, sewage, sewage sludge, industrial slurries and drainage, and in scavenging situations. ■ Electric drive versions are available, either with built-in compressor or arranged...

I am pleased to bring you our latest broadsheet of pumps which highlights our rental fleet of over 5,000 Dri-Prime® and other pumps and related equipment and accessories for your job site. Great products, and great people make our orange Godwin brand the first choice among customers in construction, municipalities, industry, and mining - for either rental or sale. A massive inventory of parts, plus fabricators, quality control technicians, and road mechanics back up our large rental fleet. Further supporting you are Godwin engineers and an expert field network of sales and applications...