godwin mud pump free sample

Fixed Competitive Price Godwin Trash Pump - BD series Double Suction Split Casing pumps – Beken, The product will supply to all over the world, such as: , , ,

We supply pumps for - Flood relief | Ground water control | Mine dewatering | Well point dewatering | Industrial sludge pumping | Emergency pumping | Sewage over-pumping.

All of our used pumps are fully tested and serviced to be in good working order. If necessary repainted to our standard red finish (other colour options available at extra cost).

Normally 3 month return to base warranty is given for used pumps sold within mainland England, Wales and Scotland excluding the following postcodes: FK, KY, PA, PH, DD and the Highlands. Please contact us for further details.

Please note that pump photographs on this page are for general guidance only and may not depict the actual pump offered. All ex-rental, ex-hire, pre-owned and refurbished water pumps supplied in excellent condition.

76mm solids handling capability and wet priming system ideal for industrial, flood relief, sewage by-pass, over-pumping and other commercial applications.

Each pump is fitted with a Hydovar variable speed drive allowing for contact pressure or flow rates varing between 10-70m and flow rates 1-11.75lps depending on set-up.

Mounted in a hushpac sound attenuated canopy with lifting frame, chassis integral bunded fuel tank, forklift pockets and engine mounted compressor for Godwin’s Dri-prime venturi automatic self-priming system.

Driven by a Deutz radiator cooled, electric start diesel engine model D2009L03. Mounted in a sound attenuated canopy with central lifting eye, chassis integral bunded fuel tank, and 25cfm vacuum pump priming system incorporating priming tank and non-return valve fitted on discharge.

Driven by a Iveco, radiator cooled, electric start diesel engine mounted on a skid base frame with central lifting eye, guarding and vacuum pump priming system.

Ideal for Emergency pumping services, Docks, ports and harbours, Refineries, Water and waste treatment, Local authorities, Offshore and float outs, Quarries and mines, Building and construction, Manufacture and industry, Power stations, Tunnelling, Agriculture.

Driven by a Isuzu, radiator cooled, electric starter diesel engine model 4LE2 mounted in a gull wing door sound attenuated canopy with variable speed throttle, central lifting eye, chassis integral bunded fuel tank and SPP’s vacuum priming system with automatic clutch to disengage vacuum pump when primed.

New SPP/Kirloskar horizontal spilt case pump with twin stage impellers complete with packed gland seal and stainless steel shaft. Fitted with 6” NP16 flanged suction and delivery branches.

Kirloskar 150mm x 125mm DSM 125-4 split-casing pump being two stage impeller manufactured in quality cast iron, bronze type wear rings, stainless steel shaft with multi ring packed glands and outboard bearing.

This pump is fitted with SPP Automatic Priming equipment with a 25CFM vacuum pump being oil lubricated. All mounted on robust chassis fuel tank frame with central lifting frame and fork lift pockets.

Ideal for site drainage, raw/process water, storm/flood water, emergency pumping, sewage over pumping, sludge, slurry, bentonite, viscous liquids and other industrial applications.

Driven by a JCB radiator cooled, electric start diesel engine model TC-63 mounted in a sound attenuated canopy with central lifting eye, forklift pockets, chassis integral bunded fuel tank and automatic self-priming diaphragm pump system.

Should you be stuck for power why not consider a diesel engine generator. This can be situated remote from the pump. Please note this can be offered at extra cost.

Fitted with Godwin’s high pressure bath mechanical seal design allowing for dry running for prolonged periods while automatically priming and re-priming with a compressor system.

Fitted with Xylems N-Impeller for improved solids handling of large soft solids or long fibrous material. Fitted with Godwin"s Dri-Prime ejector system enabling automatic self-priming suction lifts of 8.5m though 6m or less is recommended.

Fitted with Selwood’s water resistant diaphragm pump for automatic self-priming from suction lifts of 8.5m though 6m or less is recommended and a mechanical seal running in a oil bath which allows running dry without damage.

New and unused ETL50-1-120A in-line aviation fluid pump with 2” DN50 flanged suction and delivery branches. Close coupled to a ATEX approved Siemans, TEFC 3kw, 440v, 60hz electric motor.

New and unused ETL50-3-200A in-line aviation fluid pump with 1.1/2” DN40 flanged suction and delivery branches. Close coupled to a ATEX approved Siemans, TEFC 11kw, 440v, 60hz electric motor.

The pump type ETL (OH5) vertically in-line mounted, close coupled, radial split case, single stage, single suction, heavy duty centrifugal process pumps.

The design complies with the latest edition of the American Petroleum Institute standard "Centrifugal Pumps For General Refinery Services", also known as API 610/ ISO13709.

The in-line configuration is a compact pumping solution with mounting the impeller to an extended motor drive shaft presents a very compact pumping solution. The ETL (OH5) offers a space saving footprint and eliminates expensive baseplates. (This pump is also available in long coupled pump type ETLS (OH3) for high temperature applications)

The Spate 3B pump can handle dirty water, slurries, light and heavy oils. Can also handle petroleum industry products, including some of the more viscous liquids, at a high, non-turbulent flow rate.

These centrifugal pumps with closed impeller, feature a unique agitator design. This agitator lifts sediments into suspension, creating a slurry mixture and enables the continuous pumping of media with a high concentration of solids.

Robust construction, careful selection of materials and unique contour components have produced a pump with excellent abrasion resistance which, coupled with a low speed high torque motor, ensures long service life and economical operation.

LVA505 end suction pump with 6” flange suction and 4” flange delivery branches. Long coupled to a 45kw, 4pole, 415v TEFC electric motor mounted on a base frame with coupling guard.

New BP235K 6 stage diaphragm pump c/w safety relief valve belt driven by a Hatz electric start diesel engine model 1D90Z with at least 3 hour running integral fuel tank.

The unit is mounted on a skid base with forklift pockets and protective steel frame. The pump can produce between 162 and 222 l/m depending on engine speed at a constant 20bar pressure.

Nearly new Calpeda NM25/16AE Pump with 1.1/2 inch female BSP suction and 1 inch BSP female delivery connections coupled to a 1.5kw, 415 volt, 50hz TEFC electric motor.

Capable of a maximum flow rate of 3.6 m 3 / hr at a maximum head of 49.4m. This pump has a 1 / 4 inch BSP. Suitable for pressure boosting applications.

New - Unused Xylem / Lowara MP100.1/6A horizontal multistage Vogal pump with enlarged 8" flanged suction and reduced 3" Vitriolic discharge connection.

Long coupled to a 2 pole, 160kw, 50hz, 415v electric TEFC motor base mounted complete with coupling guards, valves fitted to both suction and delivery, along with a Mahle filter mounted on the discharge side of the pump.

Portable Submersible Pump & Hose Trolley built for customer to enable multiple bores to be sampled in multiple areas. Complete with panel for full variable speed control and ‘plug & play’ ease of use

Food Grade Neoprene or Nitrile impeller, Carbon/ceramic mechanical type seal, this unit can be used for the safe pumping of food grade products and materials.

Used Worthington Simpson 6L13 split case pump with 8” flanged suction and 6” flanged delivery branches. Long coupled to a 132kw, 50/60hz 2pole TEFC electric motor mounted on a base frame complete with coupling guard.

Please note that pump photographs on this page are for general guidance only and may not depict the actual pump offered. All ex-rental, ex-hire, pre-owned and refurbished water pumps supplied in excellent condition.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

The diaphragm operates in a balanced condition during the discharge stroke which allows the pump to be operated at discharge heads of over 200 feet (61 metres) of water.

The diaphragm operates in a balanced condition during the discharge stroke which allows the pump to be operated at discharge heads of over 200 feet (61 metres) of water.

The ARO Diaphragm Pump offers high volume delivery even at low air pressure. ARO pumps feature stall resistant design, modular air motor / fluid sections.

For sale we have a yellow chemical cabinet. This cabinet which has a lockable door and COSHH instructional documentation inside also has two ARO IR Intersol Pumps, Diaphragm Air pumps with a typical flow rate of 35gpm subject to air flow.

The Charge Free Stabilizer™ was designed to be installed directly before the suction manifold port between the mud pump and the charge pump. Maximizing mud pump performance by eliminating cavitation while isolating both the mud and charge pumps.

The Acoustic Assassin® was designed to be installed between the pump loop manifold and the production line. This fixture is a multi-chambered baffling system that will reduce damaging acoustic resonance generated by reciprocating pumps. The Acoustic Assassin® is an ideal addition to any pulsation control system.

The Charge Free Conversion Kit® is a high performance pulsation control kit that utilizes both compression and kinetic exchange for superior performance over traditional pulsation control methods of the past. With a gigantic increase in surface area, compression tuning, and a design to maximize energy exchange, the CFC Kits control pulsations from the pump while cleaning the signal for MWD tools.

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

United StatesAfghanistan, Islamic State ofAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaidjanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBosnia-HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBrunei DarussalamBulgariaBurkina FasoBurundiCambodia, Kingdom ofCameroonCanadaCape VerdeCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos (Keeling) IslandsColombiaComorosCongoCongo, The Democratic Republic of theCook IslandsCosta RicaCroatiaCubaCuraçaoCyprusCzech RepublicDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEthiopiaFalkland IslandsFaroe IslandsFijiFinlandFranceFrench GuianaGabonGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupe (French)Guam (USA)GuatemalaGuineaGuinea BissauGuyanaHaitiHeard and McDonald IslandsHondurasHong KongHungaryIcelandIndiaIndonesiaIranIraqIrelandIsraelItalyIvory Coast (Cote D"Ivoire)JamaicaJapanJordanKazakhstanKenyaKiribatiKuwaitKyrgyz RepublicLaosLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacauMacedoniaMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartinique (French)MauritaniaMauritiusMayotteMexicoMicronesiaMoldaviaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNetherlands AntillesNew Caledonia (French)New ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorth KoreaNorthern Mariana IslandsNorwayOmanPakistanPalauPalestinian AuthorityPanamaPapua New GuineaParaguayPeruPhilippinesPitcairn IslandPolandPolynesia (French)PortugalQatarReunion (French)RomaniaRussiaRwandaS. Georgia & S. Sandwich Isls.Saint BarthélemySaint HelenaSaint Kitts & Nevis AnguillaSaint LuciaSaint MartinSaint Pierre and MiquelonSaint Tome (Sao Tome) and PrincipeSaint Vincent & GrenadinesSamoaSan MarinoSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSlovak RepublicSloveniaSolomon IslandsSomaliaSouth AfricaSouth KoreaSouth SudanSpainSri LankaSudanSurinameSvalbard and Jan Mayen IslandsSwazilandSwedenSwitzerlandSyriaTadjikistanTaiwanTanzaniaThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkeyTurkmenistanTurks and Caicos IslandsTuvaluUgandaUkraineUnited Arab EmiratesUnited KingdomUruguayUzbekistanVanuatuVatican CityVenezuelaVietnamVirgin Islands (British)Virgin Islands (USA)Wallis and Futuna IslandsWestern SaharaYemenZambiaZimbabwe

The Godwin Dri-Prime® CD300M pump offers flow rates to 5,990 US GPM (1,360m³/hr) and has the capability of handling solids up to 3.7 in (95 mm) in diameter.

Indefinite dry-running is possible with the exclusive Godwin liquid bath mechanical seal design. Solids handling, dry running and portability make the CD300M the perfect choice for large volume water, sewage, or sludge pumping applications.