power tong frame top view in stock

The Eckel Top Drive Casing Tong is a tool developed for use on hydraulic top drive rigs to provide a high quality connection while reducing tubular damage and providing a safer enviroment for crews. With an operating capacity of 4 1/2 inch through 10 5/8 inch, is connected to the output stem of the power swivel. After installation the tong becomes an integral part of the swivel, raising and lowering as a unit and transfering the power swivel"s RPM and torque to the pipe/connection.

A guide attached beneath the top drive tong simplifies alignment of the collar within the tong. Once the collar of the pipe is enclosed within the top drive tong, the tong will grip the collar by operating the power swivel. Torque and rotational speed are controlled through the operation of the power swivel. Reversal of the power swivel will cause the tong jaws to release. Tong jaws are spring loaded to retract away from the collar.

Utilizing three gripping jaws and a patented Eckel Cam Biting System to grip the pipe collar. The same type of proven biting system found in the industry leading Eckel Power Tongs. These jaws are spaced evenly about the circumference of the collar to provide even distribution of the gripping forces

The big, capable Model 36 UHT easily produces 100,000 ft-lb of torque for makeup or break-out operations involving casing in sizes 16 inches through 36 inches. This casing tong weighs approximately 13,000 pounds and is 81 inches wide and 135 inches in length. A two-speed motor delivers 16 RPM in high, 3½ RPM in low range, both at 70 GPM.

XQ140 micro-marking and no-marking hydraulic power tongs is a special equipment and open power tongs which is applicable to make up or break out 41/2"-51/2" casing during oil field work over operation. Master and back tong device adopts jaw plate type multi-point clamping mechanism.Can choose contour coated rig dies or pyramid tooth , to ensure the column minimum damage, and can improve the pipe thread connection quality, reduce due to improper work over pipe accident etc..

1. The tongs head is the open structure which is quick and convenient for entering and retreating working position. The integral tong head has good hardness and rigidity.

2. Master tong is roller climbing two jaw plate structure，can install arc tooth die ，the contact surface is more larger and clamp no deformation, The assembly and disassembly is very convenient. The optimum tangent-diameter ratio design ensures reliable clamping and easy slope retreating.The back tong is the three-jaw-plate structure pushed by hydraulic cylinder. The structure is simple and the clamping is reliable; The minimum damage to the tubular column can be ensured, and the main body of the pipe string can be clamped.

6. Master and back tong adopt integral frame structure，back tong is floating connection，The master and back tong adjustable distance, reduce the damage of pipe string shackle;

8. Matching torque and speed test system，can accurately control the torque of makeup，can timely display, control, storage, print torque parameters（Suitable for FOX、VAM TOP、BGT1、3SB、NSCC、WSP etc special threaded bushing）.

The 9-5/8” power tong with Rineer GA15-13 two-speed hydraulic motor, motor valve, lift cylinder valve, rigid sling, FARR® hydraulic backup, configured for compression load cell.

Power tongs are an essential tool in the drilling industry and are used to make up, break out, apply torque and to grip the tubular components. We are distributors for both Starr Power Tongs and McCoy Global hydraulic power tongs in multiple sizes and torque ranges from high torque to low torque that can be used to run both casing, drill pipe and tubing. When determining which power tong is best for your project, you will want to select the power tong that best fits your tubular size ranges and torque required.

All of our power tongs are available with either the McCoy\\\\\\\\\\\\\\\"s patented WinCatt data acquisition software recently updated to the MTT systems or AllTorque\\\\\\\\\\\\\\\"s computer monitoring system for all the torque and turn control system needed in today\\\\\\\\\\\\\\\"s market for the making of tubular connections. Discover our wide selection of McCoy and Starr casing tongs, tubing tongs and power tongs for sale below!

Tongs - Power - As comparable to the popular 5-1/2" Eckel HSVS, the 5-1/2" Slide Head Vector Tong has all of the same internals, but considerable external improvements.

Tongs - Power - Farr KT5500 Tubing Power Tongs w/Jaw Die Power Tongs, 5-1/2" available with or without back-ups. KT5500 18K Tongs with hydraulic Clincher Back-up TORQUE TABLE Pressure H... More Info

Tongs - Power - McCoy KT8625 8-5/8" Casing Tong - 25K Tong Power Tongs - (Our KT7585 Model Is Being Rebadged as KT8625. There Have Been No Design Changes to this Tong, It Still Function... More Info

Tongs - Power - SNUBBING WORKOVER TUBING TONG, BY-DIRECTIONAL JAW SYSTEM, HIGH EFFICIENCY EATON MOTOR, 2WAY INDEPENDENT VALVE BODY, EXTENDED LEG - VARIABLE LENGTH CONFIGURATION, 2-3/8"- ... More Info

Tongs - Power - SNUBBING WORKOVER CASING - TUBING TONG, BY-DIRECTIONAL JAW SYSTEM, HIGH EFFICIENCY EATON MOTOR, 3WAY INDEPENDENT HANDLE VALVE BODY, SKID TYPE FRAME W/ 4 OPTIONAL BACKUP H... More Info