weco pup joint dimension made in china

PME Industrial integral pup joint can be used in oilfield standard service and sour gas (H2S) service. As a part of high pressure manifolds, Shanghai PME high pressure flow iron function well as FMC Chiksan pup joint FIG1502, FIG602, SPM flow control products 2" & 3" 1502, and WECO fittings and pup joints.

Worldwide stockist, distributor, oilfield service contract, trade agent for high pressure flow equipment supply are welcomed to send RFQ.  This email address is being protected from spambots. You need JavaScript enabled to view it. offer you quotation with best price, delivery time and sample necessary test certificateof integral pup joints.

High pressure Pup joint is a kind of pressure pipe with hammer union end or flange end connection,the high pressure pup joint can be made integral or weld type which end connection is welded to pipe. Cost of Intergal type is higher than welded type.

Hammer union end connection pup joint is designed to interchangable with weco wing union, including Fig100, Fig206, Fig207, Fig602, Fig1002, Fig1502, Fig2002, Fig2202 and etc.

Flange end connection pup joint is designed according to API 6A or ASME standard. Working pressure of pup joint is from 2,000 psi to 20,000psi.Manufacturing theory is according to API 16C Our company supply the high pressure weco pup joints are four types:pressure thread seal,

High pressure Pup joint is a kind of pressure pipe with hammer union end or flange end connection,the high pressure pup joint can be made integral or weld type which end connection is welded to pipe. Cost of Intergal type is higher than welded type.

Hammer union end connection pup joint is designed to interchangable with weco wing union, including Fig100, Fig206, Fig207, Fig602, Fig1002, Fig1502, Fig2002, Fig2202 and etc.

Flange end connection pup joint is designed according to API 6A or ASME standard. Working pressure of pup joint is from 2,000 psi to 20,000psi.Manufacturing theory is according to API 16C. Our company supply high pressure weco pup joints with four types:

Pup joints size : 1″~4″, Working pressure: 7MPa~150MPa, Length of the pup joint: 1m. , 1.5m, 2m, 2.5m, 2.8m. High-pressure straight pipes of various sizes and pressures as well as acidic environments are available upon request. Application: Fracturing manifold, cementing manifold, maintenance manifold, test manifold, high-pressure well service flowlines, fracturing flowlines, well testing flowlines, cementing and circulating flowlines etc.

PME Integral Pup Joints on wellhead equipment are manufactured from high quality alloy steel, available in 2" and 3" size, working pressure up to 20000 Psi. Our oilfield service companies clients buy pup joint from PME with HS code 8424909090 for oil field equipment purpose onshore and offshore operation.

Like PME other flowline products, PME integral fittings and pup joints are designed and manufactured as API standard, for transporting high pressure fluid with unions connections in choke and kill manifold, well testing, flow line, fluid control, flow back and cementing applications.

Connection of PME Integral Pup Joints are Hammer Weco Unions, enable to make-up and break-out of temporary flow lines more faster and easier. Unions figures 1502, FIG602 and others as operation demand.

As high pressure flow line pipes, PME supply integral pup joints assembly 2 fig 1502 m x f unions end, 2 inch FIG1502 pup joints NPST 10 ft, standard, butt weld pup joints x-overs 1502, 15000 Psi, 1ft, 5ft, 10 ft and 15ft, PME pup joint Ass.hose 3 inch npst alloy steel Fig.

"Oil country tubular goods pup joints, made of carbon or alloy steel, welded or seamless, heat-treated or not heat-treated, regardless of end finish, having an outside diameter from 2 3/8 inches to 4 1/2 inches (60.3 mm to 114.3 mm), in all grades, in lengths from 2 feet to 12 feet (61 cm to 366 cm) originating in/or exported from the People"s Republic of China."

The Union Straight pipes and elbow are designed as per API Spe 16C and made by low carbon alloy steel with integral forged, H2s as per NACE MR0175 Standard. The straight pipe with WECO Union connection is applied for connection of well surface testing equipment. The straight pipe one end is union female in Fig 602 or FIG1502, another end is union male in FIG602 or FIG1502, the nominal size is 3”, length can be 0.5m to 5m. We are able to supply straight pipe in various size with union connection.

Pup joints (flowline pipes) are pipe lines with thread, flange or union connectors on both ends, designed to be compatible with FMC Chiksan pup joints and SPM pup joints.Various pup joints are available for high/low pressure and temperature and H2S environment,such as integral pup joints( 10 feet length to handle fluids at cold working pressure), sour gas pup joints, pressure thread seal straight pipes and non-pressure thread seal pup joints.

Pup joints are forged from superior alloy steel with partial heat treating process, which are widely used for transporting high pressure flow in fracturing line, cementing line and NACE Service. Pup joints have been optimized for minimum weight and size to extend service life, easy to transport and install on site.

- Integral pup joints can be made available with two models, one is plain integral pup joints, another is pup joints with retaining shoulder, integral pup joints with retention shoulder features specially machined shoulder to prevent nut from sliding down pup joints when held vertically.

APIIntegral Pup Joints are straight tubes/pipes with hammer union, thread, or flange connections on both ends, which have been widely used for transporting high pressure flow in fracturing manifold, cementing manifold, maintenance manifold and test manifold.

Qihang"s Integral Pup Joints are forged from premium alloy steel, handled by advanced metal melting and heat treatment technology. All of our pup joints are strictly desined, manufactured and tested according to API 16C, APIQ1 and NACE 0175, both pressure thread seal straight pipe and non-pressure thread seal pup joint are available.

Integral Pup joints Flow line Pipewith weco hammer wing unionare often used in the oilfield as high pressure well servicing lines, fracturing lines, well testing lines, well cementing and circulating lines,discharge lines, auxiliary flow lines, choke-and-kill lines and other well service and stimulation applications.

We CCSCIntegral Pup joints Flow line Pipeare designed and manufactured in accordance with API SPEC.6A and API SPEC.16C standard and they are improved from SPM integral flow line pipe &FMC WECO series integralpup joints.

APIIntegral Pup Joints are straight tubes/pipes with hammer union, thread, or flange connections on both ends, which have been widely used for transporting high pressure flow in fracturing manifold, cementing manifold, maintenance manifold and test manifold.

Qihang"s Integral Pup Joints are forged from premium alloy steel, handled by advanced metal melting and heat treatment technology. All of our pup joints are strictly desined, manufactured and tested according to API 16C, APIQ1 and NACE 0175, both pressure thread seal straight pipe and non-pressure thread seal pup joint are available.

These J55, L80, N80Q & P110 pup joints are manufactured from seamless Grade J-55, L80 N80Q and P110 mechanical tubing. The API 5CT tubing pup joint is mainly used to adjust the height of the tubing strings. It is also used to adjust the depth of down-hole tools.