howard turner rotary table factory

Revolve sells parts for Howard Turner rotary tables. We also rebuild all types of rotary tables and are able to offer winter seals that are made of a rubber compound engineered for Canadian winter temperatures.

We manufacture parts for the most common types of top drives and rotary heads used on truck and track mounted drilling rigs. Our replacement quills are engineered and certified and all replacement parts are manufactured to the same or higher specifications as OEM parts. We also offer the service to rebuild top drives completely and can include re-certification to CAODC and OH&S standards.

Manufactured 2008, 104’ x 315,000# derrick, single drum with 8 lines 1-1/8” wire, dual 6’ hydro breakout, Ideco 7-1/4 x 15” duplex mud pump with 353 Cat engine, 150 ton swivel, 4-1/2” x 40’ kelly, (8) 6-1/4” collars (new), 5000’ of 4-1/2” 1660 X-hole drill pipe Double White, (2) 300 bbl mud pits, 150 bbl water tank, doghouse, 12’ substructure with 18” rotary table, center tub with v-door, (2) pipe tubs, 42” x 30’ pipe rack, (2) landing mats for rig and sub, (2) 6’ elevator links, 4-1/2” 150 ton elevators, (2) sets of slips, rat hole digger with boot, (2) Type B BJ tongs  Price:$390,000

Refurbished, excellent condition, 10" boom extension, 6 x 10” Gardner Denver mud pump, Detroit 8V91 engine (rebuilt with low hours), 13” retractable table, 4 part kelly line, 4 part tool line, separate sand line, hydromatic brake, air clutches/throttle, weight indicator, 3” King swivel, 5” x 27’ hexagon kelly, automatic pump oiler, mud standpipe, air standpipe, reverse standpipe, 12VLED lighting, derrick mounted ladder with safety system, all bushings and wear items are brand new, mounted on brand new custom trailer  Price:  $370,000

GES 1600 hp AC Drawworks, grooved for 1-3/8” drill line, powered by 1500 hp continuous 1830 hp intermittent AC drive motor.  GES 136’ x 750,000# static hook load capacity derrick when strung on 12 lines, 19,500’ racking capacity of 5” drill pipe and (4) stands of 6.5” drill collars -or- 23,400’ of 4-1/2” drill pipe and (4) stands of 6.5” drill collars.  (allows skidding of mast and substructure up to 25’ without moving rest of rig).  GES hydraulically raised substructure 26’ floor height, 22.5’ clear working height under rotary beams, 750,000# casing capacity, 505,000# setback capacity for a combined load capacity of 1,255,000 lbs.  drill floor 40’ x 21.5’, air conditioned driller’s cabin, GES electronic driller with interface for other electronic drilling systems if desired.  400 ton travelling block with (6) 42” sheaves grooved for 1-3/8” drill line, CANRIG 1036 top drive, 27-1/2” rotary table driven by 1150 hp cont/1400 hp intermittent AC drive motor, (2) BOMCO 1600 hp mud pumps 12” stroke p/b 1500 hp AC drive motor (upgraded to 7500 psi).  900 bbl mud system (self-elevating equipment skid, round bottom mud cleaning tank, round bottom suction tank, mud mixing skid, mud gas separator/trip tank skid).  (3) Brandt dual King Cobra shale shakers with Brandt fluid conditioner, Brandt dual King Cobra shale shaker, 16 desilter cones, dual desander cones, Brandt vacuum vessel degasser.  Cat 1750 kva 600 volt generators with (3) CAT 3512C diesel engines.  13-5/8” x 10,000# Cameron double type U ram BOP, 13-5/8” x 10,000# Cameron single type U ram BOP, 13-5/8” x 5000# annular BOP with remote driller’s closing panel, Koomey Type 80 7-station 22 bottle accumulator, 10,000 psi choke manifold.

15 load drill rig (2 loads drill collars), 10,500’ (3200m) (Jacknife Triple) depth, 16’ KB to ground, 12.9’ bottom of table beam to ground, National 370M drawworks, Parmac V80 auxiliary brake, Detroit Series 60 diesel engine, 14L, with Allison 6061 transmission (600 hp max power), 510 Dreco 127’ x 340,000# derrick, Dreco one piece center load substructure 53’ x 13.5’ x 14’, 20,000# max pipe setback, Dreco crown block, National 435 G175 block/hook, National P200 swivel, 1” x 5000’ drilling line, National C175S 17-1/2” rotary table, Kobelt spring applied brake caliper, (2) National 8P80 triplex 5-1/2” x 8-1/2” mud pumps with Detroit Series 2000 diesel engines, mud tank with 4 compartments:  440 bbls with mud hoppers, mud guns, agitators and transfer pumps.  Brandt shale shaker, Oilco accumulator, choke manifold, (22) 6” x 30’ x 4 H90 drill collars, (2) 9” x 30’ x 7 H90 drill collars, water tank, light plant, standby light plant, Foster 77 kelly spinner, Hawk Spinmaster 550H pipe spinner  Price:  $990,000 CDN

TSM 500 right angle gearbox, National 17-1/2” table, hydraulic catheads, electric/hydraulic pump, (2) Pullmast PL8 hydraulic winches, Leroi 550 air compressor, 80 gallon air tank c/w dessicant dryer, Detroit Series 60 diesel egine (665 hp), Allison 6061 transmission  Price:  $95,000 USD

Single drum drawworks, mounted on 3 axle trailer, 6V71 Detroit diesel engine, 96’ hydraulically raised mast, Gardner Denver FQ-FXQ 5-1/2 x 16" mud pump with air clutch powered by Detroit 6V71 diesel engine, mud mixer, 11’ x 8’ x 16’ sub, 17-1/2" Brewster rotary table, 4-1/4" x 40’ square kelly and kelly bushing, 21’ kelly hose pipe, 7/8" cable right hand lay 985’, handling tools, tongs, elevators, slips, elevator links, BOP, (3) 6" x 30’ drill collars, (45 jts) 4-1/2" XH 16.60# Grade E drill pipe, 2 Wilson tongs, 125 ton Skytop block and hook, 100 ton swivel  Package Price:  $315,000  Price, rig only:  $220,000

Cummins 350 diesel engine on deck. TwinDisc torque converter with 24" Wichita clutches. 70" hydraulically raised mast, new 2018 with sliding crown. (2) mud pumps, Gardner Denver FXN 7¼ x 14 with 6" liners powered by 525 Cummins diesel engine (new 2 years ago), air clutches, mounted on oilfield skid. Standby pump: Gardner Denver 7¼ x 12 with single Detroit 6V71, air clutches, mounted on oilfield skid. Drill pipe trailer with 38’ kelly, bushings and (13) 6” drill collars,  100 joints of 4½” x 30" steel double white band pipe, 100 joints 4” x 30" aluminum pipe.  All necessary subs and handling tools, including Drillograph straight hole tool, weight indicator. (2) Brewster travelling blocks. 18” Brewster table. (2) generators with lights. Excellent condition. Price: $325,000

SHOP BUILT 6000’ DRILLING RIG(Ref#2918Ta)  Trailer mounted, Cat 550 hp engine, 17-1/2” Oilwell rotary table, 7 x 14” mud pump with Cat engine, 4-1/2” kelly

Challenger 360 drawworks (500 HP) (rated to 6,500" with 4 1/2" drill pipe), (1) Series 60 12.7 liter 500 HP, Challenger 200 - 84" H - 300,000# SHL derrick,, 10" adjustable substructure, HT - 18" x 44" rotary table, Not used since 2018.  Price:  $180,000 Price with Venturetech top drive:  $245,000

Built 1980, 64’ x 150,000# capacity derrick, crown block, double drum drawworks, 475 hp, Lebus grooved for 7/8” line, Foster automatic make up and break out catheads, Cat 3408 engine with Allison CLT-750-2 transmission, Howard Turner 18” rotary table, split master bushing, 75 ton hook block, 50 ton 3-sheave travelling block, Howard Turner SW35-100 swivel, elevator bails, 4-1/4” square hacker kelly with upper kelly cock, mounted on back-in 3-axle trailer with detachable tag axle, 8’w x 45’L x 48”H substructure , 90” working height below base of rotary table to GL, stairs, safety rails, Ellis Williams 15W600 5-1/2 x 15” duplex pump with K20 pulsation dampener p/b Cat D3408 on oilfield skid, Continental Emsco D300 5-1/2 x 14” duplex mud pump MATTCO fluid end, PD55 pulsation dampener p/b Cat 3408 engine on oilfield skid, Ellis Williams 15W600 5-1/2 x 15” duplex mud pump K20 pulsation dampener p/b Cat D379 engine on oilfield skid, doghouse/generator, back up generator, mud tanks systems, Regan 8” 3000 annular BOP, rotary hose, suction hose, vibrator hoses, pipe tubs, elevators, pipe racks, geologist trailer, water stage, shale pits, approx. 4,960’ S135 Range 2 drill pipe, drill collars  Price:  $850,000

Manufactured 1975. Single drum drawworks, trailer mounted, 75" telescoping mast, Hacker rotary table, set up for reverse air drilling, 6" kelly, kelly hose, 2" air hose, 12,000# working winder, wireline winch, tongs, counterweight, substructure, doghouse, tongs. Just completed a job in 2020 PRICE: $110,000

Manufactured 1982, 7-1/4 x 14” mud pump, 100 ton block, 17-1/4” rotary table, 2 engines (Cat and Detroit diesel), single drum, mounted on 3-axle trailer, located Mexico  PRICE:  $245,000

Manufactured 1982, 7-1/4 x 14” mud pump, 100 ton block, 17-1/4” rotary table, 2 engines (Cat and Detroit diesel), single drum, mounted on 3-axle trailer, located Mexico  PRICE:  $245,000

CARDWELL KB200 DRILL RIG(Ref#13685Td)  Double drum, air clutches, 75’ mast, 28" table, Detroit diesel engine, centrifugal mud pump on deck, comes with 7-1/4 x 14 National duplex mud pump with 500 hp Cummins engine mounted on low boy trailer, 1200’ of 5-1/2" Reg x 30’ pipe on 40’ Hobbs trailer  Price:  $190,000

Drawworks mounted on 5 axle Crane Carrier, rated 8000-9000’ with 4-1/2" drill pipe, 550 hp Cat 3406 engine, 103’ telescoping mast, Ellis Williams 14" duplex mud pump with all new parts and fluid end including liners, heads, valves and setas and pony rods p/b 475 hp Cat engine, 5000’ of 4-1/2" drill pipe, subbase with rotary table, rig ramp, top and bottom crew houses, 40 kw generator Magnaplus powered by 4 dcyl Perkins engine, 300 bbl water tank, center walk tub, 3 pipe tubs, 12 drill collars, elevators, slips, rotary tongs   PRICE REDUCED:  $475,000

Mounted on 2006 Kimble 5 axle carrier, Detroit Series 60 diesel engine, Allison CBLT transmission, 51’H x 385,000# SHL super Single Mast, Spencer Harris crown assembly, 15PS King 150 ton power swivel, rotary hose, air mud fuel lines, Foster catheads, mounted on 2006 Kimble 5 axle carrier, drop box, folding walkways, safety rails. Mast currently off – being reworked. Located Texas Price: $575,000

Manufactured early 1980"s, triple drum with sandline, rebuilt drawworks, recent rebuild on engine, trailer mounted with twin Detroit 471 turbo engines, 56" mast, 100,000# pullback, 7 x 10 GD mud pump, 35" x 4-1/2" square Kelly, 18" Howard Turner rotary table, cathead, no pulldown, air clutches, spinning chain, racking board, 4 hydraulic leveling jacks PRICE: $250,000

DMS 800hp drawworks, (2) Cat 3406 diesel engines (450 hp each) with twin torque converters with Quad Parmac hyd., 107" x 300,000# Butler & Parks cantilever derrick, 8"H x 40" x 14"W Butler & Parks substructure with 3" pony subs, Wilson 600 mud pump with Cat D379, Wilson 600 mud pump with Cat D353, Dorland 3000# Bladder BOP Schraffer double ram 3000# psi and 3-station closing unit, 24" x 44" Oilwell rotary table, 250 ton Emsco swivel, Bear with hook weight indicator, Satellite auto driller, single pin Star recorder, 7500" of 4-1/2" x 31" 16.60# Range 2 drill pipe, (13) 6-1/4" drill collars, generators, wireline, 250 ton Sowa block, double life single screen shale shaker, 4 x 5 Mission desander, 350 bbl water tank, 4000 gal fuel tank, (2) steel pits with shalke shaker and desander 500 bbl total cap, mud house with 2 mud mixers and slug tank, derrick bolster, pipe boxes, catwalks   Price:$395,000

Gardner Denver 5-1/2 x 6 mud pump, 350x600 LeRoi air compressor with spare compressor for parts, 44M drawworks with spare 34M drawworks, injection pump for air drilling, Midway retractable rotary table, extended derrick with racking b oard to stand back drill pipe, both kelly block and hoist block are 4 line 19 x 7-5/8 non rotating with 2 spare spools (one 255’ for kelly and 275’ for hoist block), mounted on 1999 Kenworth tandem axle truck with Cat 3406E Cat engine, PTO

WILSON MOGUL 38 DRILLING RIG(Ref#8645RA) Manufactured 1980, trailer mounted with 60 series Detroit engine, mounted on sub frame, truck is included, 75 ton block, 68" telescoping mast, 18" stationary rotary table, 46" x 4 ½" Kelly, air clutches, no pulldown, breakout tongs, 4 hydraulic leveling jacks, no pipe available  Price $70,000

Built 2003, 100’ x 230,000# Pingo telescoping hydraulically rasied and scoped mast, New Tier 3 14L Detroit 60 Series engine (320 hours) 520 hp, Allison transmission, new radiator and hydraulic cooling system, new hydraulic table drive motor, new hydraulic pump drive for rotary table, new crown swing boom for racking board safety restraint, double drum 230,000# mechanical drawworks, air disc brakes, 27-1/2” Oilwell rotary table on detachable sub base, tongs, slips, dog collar, new hydraulic make up and breakout systems, 2 hydraulic aux winches, SAWA travelling blocks, weight indicator and tong torque system.  Rig and components are in excellent working condition, rig mounted on 3 axle semi chassis with hydraulic outriggers, HD steel beams for rig foundation/support.  Rig built to pull 60’ strings and rack in mast 4-1/2” drill pipe.  Price:  $625,000

Built 2008, 96’ x 240,000# Eagle hydraulically raised and scoped mast, mounted on 5 axle carrier, Detroit 60 Series 14L Tier 3 engine (600 hp), 5800 Allison transmission with drop box for rig and drive operation, new hydraulic cooling system for rig, new hydraulic table drive motor, new hydraulic table drive pump, new Hopper T Box drive for drawworks and table pump drive, double drum 240,000# mechanical drawworks, new crown swing boom for racking board safety restraint, new hydraulic make up and breakout systems, tongss, slips and collar, new racking board, new hand rails, new front tires and wheels, new cables, 2 aux hydraulic winches new or rebuit weight indicator and tong torque system, mud system plumbing new, new hydraulic lines  rig designed to pull 60’ strands and rack in mast, 4-1/2” drill pipe, new steel beams for rig foundation, support, rebuilt hydraulic outriggers, rig converted to drilling rig in 2017 and drilled 300’ test well.  10 hours total usage since.  Like new condition  Price:  $750,000

Built 2010, Cat 3412C DITA diesel engine, 52’ x 220,000# derrick, 4 sheave crown, 550 hp top drive, 20-1/2” rotary table, 16’H substructure with 24” clearance between mast to well center, (2) Drillmec 7TS600 7 x 8 triplex mud pumps 600 hp p/b Cat C18 diesel engine, mud system, diesel tank, water tank, 11” x 5000 psi Hydrill double BOP, Shaffer 5000 psi GK annular BOP, accumular closing unit, generators, hydraulic torque wrench, power tongs, instrumentation, hydraulic pipe handling, 6500’ of 4” S135 drill pipe  Price:  $4,375,000

Built 2013, Cat C18 ACERT DIT-ATAAC diesel engine, 52’ x 400,000# derrick, 8 sheave corwn block, 1000 hp top drive, 27-1/2” rotary table, 25’ H substructure with 23’ clearance clear height under rotary beams, (2) Drillmec 9T-1000 9 x 8 mud pumps p/b Cat 3512 engines, mud system, diesel tank, water tank, 11” x 5000 psi Hydrill double BOP, 5000 psi Shaffer GK Annular BOP, accumulator closing unit, generators, power tongs, hydraulic torque wrench, instrumentation, hydraulic pipe handling, 14000’ of 4” S135 drill pipe  Price:  $7,500,000

10,000" capacity, 14" KB,  Emsco GB500 drawworks p/b (2) 3408 Cat engines (800 hp),  Lee C. Moore 134" derrick, 11" x 24" x 46" substrcuture, 40" kelly, Ideco 2-1/2 x 53" table, swivel, Web Wilson tongs, Brewster 750 mud pump p/b Cat D353 engine, Emsco D700 mud pump p/b Cat D353 engine, 600 bbl mud pits, 3) Cat 3406 245kw light plant, 18 drill collars, 5000" drill pipe, 16" x 10" doghouse, 25" x 10" change house, 5-1/2" x 46" catwalk, 1 set pipe racks, 6000 gal fuel tank, 250 bbl water tank, stacked since Dec 2017, ready to work  Price:  $245,000

Built 1990, 17-1/2” rotary table, 2 sectional mast, kelly, kelly bushing, cathead, mounted on 5-axle carrier, duplex mud pumps, 10” x 12” (2) Detroit 6V71 engines   Price:  $295,000 USD

5500" depth capacity, U34 drawworks powered by Cat 3406 (400 hp), 97" Lee C Moore Derrick, Lee C Moore 16" x 42" x 8" substructure, Ideco MM550 mud pump p/b N14 Cummins (475 hp) 6" x 16" liners, 40" kelly, 7" x 46" cat walk, PZ 17-1/2" x 44" table, Martin Decker weight indicator, Web Wilson tongs, Gardner Denver 125 ton swivel, 150 ton Emsco blocks with Web Wilson hook, 135 kw John Deere light plant, 80 bbl premix powered by 371 Detroit (6" x 8"), 17 drill collars 6" x 2-3/8" x 30" w/4-1/2 X hole connections, 5000" drill pipe, 16" x 10" doghouse, 3 pipe baskets, 2 sets 28" pipe racks, 3200 gal fuel tank, 300 bbl water tank, 10" KB.  Rig has been stacked since Dec 2017   Price:  $245,000

GARDNER DENVER 2000(Ref#7109T)  Manufactured 1978, 5-1/2 x 10 Gardner Denver mud pump, cathead, chain pulldown, 56" mast, 10" table, mounted on 4 axle Crane Carrier, Cummins 400 engine  Price:  $200,000

Manufactured late 1970"s, completely rebuilt 2008, 58" x 100,000# mast, manual brakes with capacity of six part line both drums, 7-1/2 x 10" Gardner Denver mud pump, 4-1/2" x 38" kelly, 10" retractable table, 3 leveling jacks, mounted on 4 axle Crane Carrier with 350 Cummins PTO engine, complete rebuild including new mud pump gear end, major renovations on carrier, up to 3000" depth capacity  Price:  $195,000

Cabot Franks Explorer drawworks, Detroit 60 Series diesel engne, 3 axle trailer, 6 speed Allison 5860 transmission, 96" x 250,000# Cabot mast, 4 sheave Cabot crown with Lebus grooving, 160 ton Ideco Shorty block, 125 ton Ideco Swivel, 40" square kelly, (new) 45" long 5000 psi kelly hose, 17-1/2" x 44" Oilwell table with bushings, 10"H x 300,000# capacity Cabot substrcuture (3-piece), 5" x 3,000# Cabot pony sub, 5000" 4-1/2" flush joint drill pipe, (6) 6" x 20" drill collars (3 spiral), 4-1/2" 150 ton BJ elevator,  (2) mud tanks, shale shaker, catwalk, dog house, many extras Price:  $500,000

(2)  3406 Cat motors w/Allison torque converters & Allison 6 speed transmissions, 113 ft. x 278,000# Ideco derrick,  Cabot 13 ft scissor type substructure 350,000# rating, 17-1/2 in rotary table

IDECO H37 BACK IN RAMBLER DRILLING RIG  Mounted on a 5 axle carrier, powered by a 550 h.p. Detroit 12V 71 motor.  Equipped with Parkersburg hydramatic brake, derrick is removed and not avaialble, telescoping substructure (telescopes from 9" - 12"), Oilwell 17-1/2" rotary table, rig can rack 7000" of 4-1/2" drill pipe and (24) 6" collars, Martin Decker weight indicator, hydraulic hoist with 5/8" line mounted on rig

Oime SD7E drawworks with Wichita 2-36 KKB disc brake, powered by (2) GE 752 traction motors, IEC SCR I-drive power system,  147" x 750,000# SHL derrick with integrated top drive NOV-TDS11 SA 500 ton, 20,000" racking capacity, 1-3/8" EIPS drill line, 27"H self-elevating substructure with 24" clear height under beams, simultaneous rotary capacity of 750,000# and 400,000# setback, 27-1/2" rotary powered by (1) GE 761 traction motor, 350 ton American block, (2) 1600 hp Lewco WH1612 triplex pumps each driven by (2) GE 752 series traction motors, (2) tank 1000 bbl mud system, (2) cone desander, (12) cone desilter, vacuum degasser, 4-1/16" x 2-1/16" 5000 psi choke manifold, (1) 300 bbl water tank, (1) 9000 gal fuel tank, NOV Iron roughneck ST80C, hydraulic catwalk, 30 ton BOP handling system, Bi-directional walking system  Price: $2,800,000

Manufactured 1980, Triple drum, 58" derrick, 18" rotary table, 8V71 Detroit diesel, 4-1/4" x 39" kelly, KG50 King swivel, 4 lines 3/4" line, mounted on 3 axle trailer.

Rated to 8500" with 4-1/2" drill pipe, MAC 400 drawworks with hydromatic brake, catheads, p/b Cat 3408 (450 hp) with air clutch and torque converter, Gardner Denver FXN 7-1/2 x 14" duplex mud pump p/b Cat 3408, 98" x 280,000# PJ Services Mfg free standing mast, scopes with kig pin and two axle dolly, can rack 8500" of 4-1/2" drill pipe, 125 kw generator p/b Detroit 671 in steel house with all switchgear and transformer (2nd gen set inoperable and not included), steel house includes parts cabinets, work area and storage.  One piece substructure 8"H x 15"W x 34"L with 4" fold down wings, enclosed parts house and large volume tank, top dog house scopes dow into 400 bbl water tank, heater, lockers, knowledge box, 17-1/2" Brewster rotary table, 4-1/2" square kelly, 3-sheave (6 lines) hook/block grooved for 1-1/8" line, 150 TSM swivel with new wash pipe and packing, Regan 10" annular blowout preventor, Mud system with single cone desander, Mission Magnum mud mixing pump, mud stirring guns (rig uses earthen pits), lower kelly valve, inside BOP.  Kelly hose (new), vibrator hoses (3), 2500" 1-1/8" drill line (new), mouse hole, mouse hole driller, weight indicator, tong torque gage, Bear automatic driller, one-pen drill recorder, Sure Shot deviation instrument, mud gauges, 3 sets pipe racks, type C rotary tongs, lights for derrick, substructure, mud pump, generator house, drill collar slips, 2 sets drill pipe slips, Quincy 325 air compressor with electric motor, slick line wireline unit, mounted on single axle trailer. Stacked since 2010, located USA

GARDNER DENVER 3000(Ref#15370Ra)  Manufactured 1982, 7-1/4 x 14" mud pump, 100 ton block, 17-1/4" rotary table, 2 engines (Cat and Detroit diesel), single drum, mounted on 3-axle trailer, located Mexico  PRICE:  $245,000

GARDNER DENVER 3000(Ref#9778T) Manufactured 1975. Single drum drawworks, trailer mounted, 75" telescoping mast, Hacker rotary table, set up for reverse air drilling, 6" kelly, kelly hose, 2" air hose, 12,000# working winder, wireline winch, tongs, counterweight, substructure, doghouse, tongs, just completed a job in 2020   Price: $110,000

GARNDER DENVER 3000(Ref#15370Rb)  Manufactured 1974, 7-1/4 x 10" mud pump, Detroit 8V71 diesel engine, single drum with auxiliary drum, 17-1/4" rotary table, 75 ton block, mounted on 3-axle trailer, located Mexico  PRICE:  $170,000

GARDNER DENVER 3000(Ref#8732N) Manufactured in 1989, 18" Gardner Denver RT-18 rotary table, single drum drawworks with 132,000# capacity with 6 lines, SSW 125 Gardner Denver swivel, 4 ¼" X 40" Kelly, Bushing Kelly, 100 ton Gardner Denver Block/hook, Gardner Denver FY-FXD  7-1/2" X 10" Mud Pump,  Sand Reel , Parmac Hydromatic Brake, Martin Decker weight indicator, 4 hydraulic leveling jacks, mounted on 3 axle trailer, GMC 671 engine, Detroit Series 60 diesel engine, double section mast 98" x 200,000#, 2 Foster catheads, 2 brake tongs with hydraulic jack, Mud Cleaning System Mud tank 2 centrifugal pumps, 1 Liner shale shaker and 6 cone desanders, trash pump, located Mexico Price on Request

GARDNER DENVER 3000 DOUBLE DRUM(Ref#6059R)  Manufactured 1977, 95’ x 200,000# hookload capacity mast, vertical freestanding hydraulically rasied and scoped w/stabbing board, double drum drawwork, 121 Hydramatic brake, 1” drill line, p/b (2) 671 Detroit engines (175 hp) each thru compound case, Low back substructure 8’ x 8’ x 4’ clerance under table platform, mud boat, Howard Turner 18” rotary table, King 75WP swivel, 4-1/2” x 40’ square kelly with roller type bushing, (1) Mud King 110 ton with (4) sheave traveling block, elevator links.  BJ Type LF-BF Model CTS power casing tongs w/ 2-3/8”, 2-7/8” and 4-1/2” jaws,  225 bbl mud tank w/ 5 x 6 x 11 Mission Magnum mix pump, Derrick FLC 503 Flo Line shaker (no cones) p/b John Deere diesel engine, 80 bbl mud system w/ 5 x 6 x 11 mix pump p/b 471 NA Detroit diesel premix, 8’W x 7’H x 10’L covered porch.  (1) Kohler Model 100REOZLC 88kw capacity p/b John Deere diesel engine, 200 bbl water tank, 1300 gal fuel tank, doghouse and change house, all mounted on 42’ tandem axle trailer.  Gardner Denver FXN 7 x 14” mud pump with 5-1/2” liners, quick change valve caps, powered by 3406C Cat (425 hp), skidded with metal roof, tarp sides.  (23) 4-1/2” drill string, slick collar HD90 box and pin, 200 jts 6,000’ 4” full hole.

In early 2015 rig drilled 40 holes to depth of 4,500’.  Rotary table, blocks and mud pump have all been refurbished since project completion.    Price:  $250,000

GARDNER DENVER 2500(Ref#10420T)  Manufactured 1980"s, trailer mounted, 6-part line with 3-sheave travelling block, 6" Howard Turner RC swivel, 37" kelly, 18" Gardner Denver table, International DT466 diesel engine, no mud, 55" derrick, runs 30" drill pipe, currently drilling  Price:  $265,000

GARDNER DENVER 2500(Ref#8780N)   Manufactured in 1989, 18" Gardner Denver RT-18 rotary table, single drum drawworks with 100,000 LBS # capacity with 6 lines, SSW 75 Gardner Denver swivel, 4 ¼" X 40" Kelly, kelly bushing, 60 ton Gardner Denver Block/hook, Gardner Denver Sand Reel, Parmac Hydromatic Brake, Martin Decker weight indicator, 4 hydraulic leveling jacks, mounted on 3 axle trailer, Detroit Series 60 diesel engine, single section mast 98" x 150,000#, 2 Foster catheads, 2 brake tongs with hydraulic jack ,Mud Cleaning System, Mud tank 2 centrifugal pumps , 1 Liner shale shaker and 6 con desanders, Trash pump , Gardner Denver FY-FXZ 7 1/4" X 12" Mud Pump skided Mounted powered by detrot diesel serial 60, located Mexico  Price on Request

GARDNER DENVER 2000 (Modified, 2800" capacity)(Ref#10286Tb)  Manufactured 1980, 3 drum Heavy Duty drawworks (freshly overhauled), hydro brake, set up with elevators and compression slips, hydraulic pulldown, 54" HD square derrick, 6 line blocks 5/8" cable, 4-1/2" x 37" square kelly, roller kelly bushing, mounted on Western Star Tandem axle truck, 4 leveling jacks, on deck Gardner Denver FXX 7-1/2" x 8" mud pump chain drive gear end (freshly overhauled), 18" Gardner Denver rotary table, full set of tongs, weight indicator, side catwalks, spinning chain  PRICE:  $250,000

GARDNER DENVER 2000(Ref#4906R) Manufactured early 1980"s, triple drum with sandline, rebuilt drawworks, recent rebuild on engine, trailer mounted with twin Detroit 471 turbo engines, 56" mast, 100,000# pullback, 7 x 10 GD mud pump, 35" x 4-1/2" square Kelly, 18" Howard Turner rotary table, cathead, no pulldown, air clutches, spinning chain, racking board, 4 hydraulic leveling jacks PRICE: $250,000

GARDNER DENVER 2000(Ref#7109T)  Manufactured 1978, 5-1/2 x 10 Gardner Denver mud pump, cathead, chain pulldown, 56" mast, 10" table, mounted on 4 axle Crane Carrier, Cummins 400 engine  Price:  $200,000

GARDNER DENVER 2000(Ref#10705Tb)  Manufactured late 1970"s, completely rebuilt 2008, 58" x 100,000# mast, manual brakes with capacity of six part line both drums, 7-1/2 x 10" Gardner Denver mud pump, 4-1/2" x 38" kelly, 10" retractable table, 3 leveling jacks, mounted on 4 axle Crane Carrier with 350 Cummins PTO engine, complete rebuild including new mud pump gear end, major renovations on carrier, up to 3000" depth capacity  Price:  $195,000

GARDNER DENVER 2000(Ref#12877Ra)  Manufactured 1977, 6 x 6 Wheatly mud pump, LeRoi 500 cfm compressor, DSM 8-1/2" stationery table, 120 Diamond chain pulldown, mounted on Peterbilt truck with newly rebuilt Cummins 400 engine, was owned by government (not a lot of wear and tear)  Price on Request

GARDNER DENVER 2000(Ref#580Na)  Manufactured 1976, 7-1/2 x 10 FXO mud pump (rebuilt), 3 x 4 Mission charge pump with motor and hydraulic cooler (low hours), mounted on 1976 Crane Carrier with 400 Cummins, PTO (completely rebuilt), air clutches, hydraulic pulldown, 10” Gardner Denver retractable table, 9 speed rotary transmission, hydraulic spinners, 56’ derrick  PRICE:  $237,500

GARDNER DENVER 2000(Ref#8733N) Manufactured in 1980 , Gardner Denver FY-FXD 7-1/2 x 10" mud pump, 18" Gardner Denver RT-18 rotary table, double drum drawworks 45,000# capacity with 6 lines, sand reel , 4 Hydraulic leveling jacks, 58" x 66,000# capacity mast,2 Caterpillar engine, SW 75 Ton Gardner Denver Swivel, 2 Traveling blocks, 40" Kelly, kelly bushing, air clutches, Parmac Hydromatic brake, 2 brake tongs with hydraulic jack, trailer mounted on a 2 axle located Mexico Price on Request

GARDNER DENVER(Ref#14020T)  Manufactured 1968, trailer mounted, winch drive, no mud pump, 22-1/2" rotary table, 55" derrick, 1200" of 6" drill stem  Price:  $270,000

GARDNER DENVER 1700(Ref#7551R)  Manufactured 1980, hydraulic bailing drum, 5-1/2 x 8 Gardner Denver mud pump with new fluid end, new pump clutch, new rotary clutch, chain pulldown, 10" rotary table, mounted on 2002 Western Star, 10 speed transmission, pipe rack, air clutches, new 2" Little Giant swivel, new 4" x 24" fluted kelly, 44" derrick with flanges for extension, can easily be rigged up for reverse circulation    PRICE:  $225,000

GARDNER DENVER 15W DRILL RIG(Ref#1375T)  Manufactured 1976, 750/250 air compressor, 10” retractable rotary table, Little Giant swivel, mounted on 4 axle Crane Carrier, 400 Big Cam engine (5000 hours), 1000’ of 3-1/2” x 20’ drill pipe (fits on rig)  Price: $117,500

GARDNER DENVER 15W(Ref#13200R) upgraded with larger drawworks (has been to 2000"), 6 lines, mounted on 4 axle CCC with N14 Cummins, 18" Howard Turner stationary table, 5" hex Kelly, folding catwalks, racking board, (2) 6x10 pumps, 3" Mission pump, air clutches, hydraulic pulldown, 4 hydraulic leveling jacks   Price rig only:  $200,000

GARDNER DENVER 15W(Ref#10468T)  Manufactured 1977, Cummins 400 Big Cam 3 engine (less than 300 hours since in frame), 5-1/2 x 8 Gardner Denver mud pump, Gardner Denver WEJ 750/250 air compressor with blower, 52" x 100,000# 4-line derrick, 2500" racking board, hydraulic power tongs range 2-3/8 – 4-1/2, mounted on 4 axle Crane Carrier, 4 cylinder Bean mist pump, hydraulic hydramatic trip hold back, hydraulic kelly hold back, 4-1/2" square kelly with kelly cock, 10" Gardner Denver rotary table, swabbing drum with 2000" cable.

GARDNER DENVER 15W(Ref#2521T) Manufactured 1974, complete rebuild, 5 x 8 high pressure mud pump, 54" derrick, 7-1/2" retractable rotary table (rebuilt 2018), Cummins 290 on deck, kelly bushing has been replaced, 290 Cummins deck engine, air clutches, wet clutch on main drive replaced, no air compressor, mounted on 4 axle Crane Carrier with 315 Cummins engine, 10 speed transmission, new clutch, tires 90%.  Includes 340" of 4-1/2" x 20" drill pipe, 6" stabilizer, 5" stabilizer, new tires (90%), brakes, clutches and bearings have beenreplaced  Price:  $215,000

GARDNER DENVER 15W(Ref#5509T)  Manufactured 1977, DSM drawworks, 5-1/2 x 8 mud pump, 10" table, WEJ air compressor, pulldown, mounted on 4 axle Crane Carrier, 400 Cummins engine, derrick extension with board, excellent tires, rod box,  300" of 20" (2-3/8 IF) drill pipe  PRICE:  $137,500

GARDNER DENVER 15W(Ref#15009Ta)  Manufactured 1977, mounted on 1977 Autocar NTC 400 Big Cam 3 engine, 5-1/2 x 10" Gardner Denver mud pump, 256S2 Leroi air compressor, 44M drawworks 8-1/2" DSM rotary table, 342" mast with extension and racking board, pipe slide, 5 leveling jacks, Bean injection pump  Price:  $169,500

GARDNER DENVER 15W(Ref#8645RB) Manufactured 1978, PTO, mounted on CCC with diesel engine, (2) 5 x 8 mud pumps, 3 x 4 Mission mud pump, 10" retractable rotary table, 4" fluted Kelly, no air, 4 hydraulic leveling jacks, no pipe available   PRICE:  $165,000

GARDNER DENVER 15W(Ref#10133R)  Manufactured 1978, 52" mast, 4" x 31" kelly, 10" retractable table, 700/200 piston air compressor, 5 x 10 Gardner Denver mud pump, hydraulic chain pulldown, mounted on 3-axle Crane Carrier, 3 leveling jacks,  Price:  $265,000

GARDNER DENVER 15W(Ref#15089R)  Manufactured 1978, 5-1/2 x 10 Gardner Denver mud pump, no air compressor, 10" retractable table, 4-1/2" x 24" kelly (smaller kelly available), mounted on 1977 Autocar with 350 Cummins engine, PTO, air clutches, 58" extended mast, racking boards, pipe rack, breakout tongs, chain pulldown, 5 hydraulic leveling jacks Price:  $165,000

GARDNER DENVER 15W(Ref#4383Ta)  Manufactured 1974, Gardner Denver 5-1/2 x 10 mud pump, 10" retractble rotary talbe, 53" mast, Giant swivel, mounted on 4 axle Crane Carrier with 350 Cummins engine, 3 hyd leeling jacks, air clutches  Price on Request

GARDNER DENVER 15W(Ref#4383Tb)  Manufactured 1970, Gardner Denver 5-1/2 x 10 mud pump, 10" retractble rotary talbe, 53" mast, Giant swivel, mounted on 4 axle Crane Carrier with 350 Cummins engine, 3 hyd leeling jacks, air clutches  Price on Request

GARDNER DENVER 15W(Ref#13405R) Two available, manufactured 1972 and 1973, mounted on CCC (twin steer) with rebuilt Detroit 8V92 engine, 600/300 air compressor, no mud, 7-1/2" retractable table, hydraulically driven Ramsey winch, 4" x 25" Kelly, breakout wrench, air clutches, pipe rack, 200" of 4" x 20" drill pipe, 3 hydraulic leveling jacks, sitting 3 years, running when parked  Price$43,500 each OBO

GARDNER DENVER 14W DRILL RIG(Ref#13060Ra)  Manufactured 1973, 650/250 air compressor, Gardner Denver 5 x 6 mud pump, air clutches, 10” retractable table, 40’ mast,  4-1/2” x 25’ kelly, mounted on tandem axle Crane Carrier with 375 hp Cummins engine, 13 speed transmission, 3 leveling jacks, rod box, pipe racking stand, 210’ of 4-1/2” x 15’ drill pipe, running condition, does 65 mph Price:  $74,500

GARDNER DENVER 14W(Ref#13581R)  Manufactured 1973, triple drum drawworks (bailing), WEJ 600/250 air compressor Gardner Denver FXG 5 x 6 mud pump, 38" derrick, Bean injection pump, GD 10" retractable rotary table, hydraulic pulldown, 4-1/4" round fluted kelly with 2" swivel, mounted on Crane Carrier p/b Cummins 400 BC with Jake brake, 13 speed fully transmission, 3 hydraulic leveling jacks, (30) jts of 3-1/2" x 20" (2-7/8) drill pipe,  Price:  $157,500

GARDNER DENVER 14W(Ref#2218Ta)  Manufactured 1972, 5 x 10 Gardner Denver mud pump, 7-1/2" retractable table, 4-1/2" x 20" kelly, no rod box, no pipe included  Price:  $100,000

GARDNER DENVER 1500(Ref#1323T)  extended derrick, Gaso 6-1/2 x 10 pump, pulldowns, new 10" retractable table, air compressor, mounted on 1985 Peterbilt 359 truck with Cat 3406 engine, pipe rack, 1800" drill pipe, diverter, pipe spinners, pipe truck, water truck  Price:  $350,000

GARDNER DENVER 1500(Ref#13686T)  Manufactured 1974, mounted on 4 qaxle Crane Carrier, 300 hp Cummins engine, 5-1/2 x 8 Gardner Denver mud pump, 750/300 air compressor, 58" extended mast, 10" retractable table, chain pulldown, 800" drill pipe, ready to work  Price:  $160,000

GARDNER DENVER 1500HD(Ref#4198RA) Manufactured 1975, double drum, refurbished, air compressor (PTO), 5-1/2 x 8 mud pump, mounted on 1975 International with 6 cyl Detroit diesel engine, 38"9" derrick, 3 lines to hook, 3" swivel (reduced to 2" mud hose), 3-1/2" fluted kelly, 5-1/2" stationary table, pipe rack, no pipe available  Price:  $125,000

GARDNER DENVER 1500(Ref#1242R) Manufactured mid 1970"s, brand new derrick & racking board, PTO, mounted on Autocar with 400 Cummins engine, 5 x 6 mud pump, no air, 7" retractable table, 3 ¾" x 25" Kelly, 48" mast, air clutches, hydraulic pulldown, breakout tongs, 3 hydraulic leveling jacks, no pipe available  Price:  $90,000

MAYHEW 1500 DRILL RIG(Ref#4075Ta)  Gardner Denver 5 x 6 mud pump, air compressor, 4” kelly, rotary table, no pulldown, mechanical clutches, mounted on Peterbilt truck with diesel engine, runs 3” drill rod, running condition  Price:  $92,500

MAYHEW 1500(Ref#15697T)  Detroit 671 diesel deck engine, no mud, no air compressor, retractable table, 26’ square Kelly (can run 33’ casing), mounted on 1981 GMC Brigadier with Cat 3208 engine, pipe racks (holds approx. 500’), hydraulic breakout, hydraulic pulldown, air clutches, 3 leveling jacks, 900’ drill pipe, 22’ 3-axle trailer, (2) 4-1/2” x 20’ drill collars, (1) 5-1/2” x 30’ drill collar, misc change overs and pick up plugs  Price:$54,500

GARDNER DENVER 1500(Ref#1814Ta)  5 x 8 mud pump, stationary table, 4"  kelly, mounted on 1979 International truck with diesel engine, PTO, pipe racks, 4 hyd leveling jacks, 17 jts drill pipe, needs new gearbox  Price:  $62,500

GARDNER DENVER 1400(Ref#14364R) Manufactured 1979, PTO, mounted on 1979 Ford truck, 34" mast, 7-1/2" retractable table, 23" kelly, chain pulldown, air drawworks  PRICE:  $74,500

GARDNER DENVER 1400(Ref#15009Tb)  Manufactured 1978, mounted on 1978 Peterbilt 353-S truck, NTC 400 Big Cam 3 engine, 5-1/2 x 8" Gardner Denver mud pump, 256S2 Leroi air compressor, 1400 drawworks, 7-1/2" GD rotary table, 32" mast with extension and racking board, pipe slide, 4 levelng jacks, Bean injection pump, electric retarder  Price:  $199,500

GARDNER DENVER 1400(Ref#1338Ta)  Manufactured 1977, 5 x 6 mud pump, 350 cfm air compressor (spare parts for compressor), 14" retractable table, 4-1/2" x 23" kelly, 38" mast, 3 hyd leveling jacks, mounted on Crane Carrier with 350 Cummins engine

GARDNER DENVER 1250(Ref#10460T)  5-1/2 x 8 Gardner Denver mud pump, 1500 drawworks, 7-1/2" stationery rotary table, mounted on 1997 International truck with L10 Cummins, 300" pipe  Price:  $65,000

GARDNER DENVER 1000 MUD ROTARY DRILL RIG(Ref# 7185T)  Built 1976, one owner rig, 5 x 6 Gardner Denver mud pump, 427 CFM piston air compressor, retractable rotary table

GARDNER DENVER MUD ROTARY RIG(Ref#3747Tb)  900/350 air compressor, no mud pump, Chicago Pneumatic mast, mounted on tri axle International, needs minor work   Price:  $112,500

MAYHEW DRILLING RIG(Ref#2349T)  Gardner Denver 5 x 6 mud pump, big air compressor, retractable table, mounted on 1991 International 4800 truck with diesel engine, approx. 193,000 miles  Price:  $110,000

MAYHEW 1000(Ref#15735Ta)  Manufactured 1958, mounted on 1999 Sterling 60 Series Detroit engine, 5 x 6 Gardner Denver mud pump, 7-1/2" stationary table, 33" kelly, 35" mast, 2 rear and 1 front leveling jacks, 140" of 2-3/8" drill pipe, ready to work  Price:  $57,500

MAYHEW 1000 DRILL RIG(Ref#4401Ta)  Gardner Denver mud pump, stationary table, 2-7/8" kelly, mounted on 1977 International truck, approx. 300’ 2-7/8" drill pipe, 7-7/8" & 9-1/4" bits, running condition  Price:$62,500

MAYHEW 1000(Ref#15087Ta)  Manufactured 1957, 5 x 6 Gardner Denver mud pump (new gear end and fluid end), 7-1/2” retractable table, 24’ kelly, 35’ mast, chain pulldown with hydraulic motor, mounted on 1973 Diamond Reo double frame, 290 Cummins engine, 8 speed transmission, engine and transmission new, 2 rear and 1 front leveling jacks, 300’ of 2-3/8” drill pipe, mud pan, 2 bits, ready to work, new cables,   Price:  $62,500

MAYHEW 1000(Ref#8472T)  Set up for drilling and workover, 4” square kelly, stationary table, mounted on 1974 International Lodestar, 5 x 6 Gardner Denver mud pump, no rod box, breakout tongs,  400’ of 2-3/8” x 20’ drill pipe, 10” surface bit, (2) 4” drill collars, 11 new button bits, 3 axle pipe trailer   Price:  $44,500

MAYHEW DSM 1000 DRILL RIG(Ref#5483T)  Completely refurbished 2010, derrick needs a little work, Mission Magnum Sandmaster 4 x 3 x 13 mud rotary pump, mounted on 1998 Mack CH613, completely with 2-3/8 pipe and various bits  Price:  $167,500

MAYHEW 1000(Ref#11322T)  Mounted on 1994 Ford truck, Cat engine, 7-1/2" table, 5 x 6 Gardner Denver mud pump, 23" kelly, 2" swivel, hydraulic pulldown, water injection pump, 3 leveling jacks  Price:  $60,000

MAYHEW 1000(Ref#3870R)  air compressor, 5 x 6 mud pump, 23" kelly, 7-1/2" rotary table, mounted on 1996 International truck with Cummins 350 hp engine, 300" of 2-7/8" OD with 2-3/8 IF drill pipe, air clutches PRICE:  $79,500

MAYHEW 1000(Ref#5199R)  5 x 6 Garnder Denver mud pump, Gardner Denver air compressor, 5-1/4" stationary rotary table, mounted on 1997 Ford L9000 truck with Cummins 350 hp diesel engine, chain pulldown, 23" kelly, new brakes, new drums, new kelly bushings  Price:  $75,000

MAYHEW 1000(Ref#891Ta)  Manufactured 1978, 5 x 6 Gardner Denver mud pump, Gardner Denver air compressor, 5-1/4" stationary table, mounted on 1997 International truck with Cummins engine, 10 speed transmission, 30" mast, 25" kelly, chain pulldown, 2 rear leveling jacks, 300" of 2-7/8" IF drill pipe  Price:  $79,500

MAYHEW 1000(Ref#891Tb)  5 x 6 Gardner Denver mud pump, IR air compressor, 7-1/2" Mayhew rotary table, 30" mast, 25" kelly, chain pulldown, air clutch, mounted on 1996 Ford LT9000 truck with Cummins engine, 2 rear jacks, 300" drill pipe  Price:  $89,500

GARDNER DENVER 1000HD(Ref#15652T)  Manufactured 1979, 5 x 6 Failing mud pump, Leroi developmental air compressor, 23" fluted kelly, 7-1/2" retractable Speedstar table, hydraulic pulldown, air over hydraulic clutches, pipe rack, breakout wrench, mounted on International truck with DT466 engine, 3 hyd jacks, 300" of 20" pipe

GARDNER DENVER 1000(Ref#13496T)  Manufactured 1979, 5 x 6 mud pump, 200 cfm air compressor, 5-1/2" retractable table, 3-3/4" x 23" fluted kelly, hydraulic pulldown, mechanical clutches, pipe rack, pipe wrench, mounted on 1979 Ford 9000 ruck with 6V92 Detroit engine, 4 hyd jacks, drills daily  Price:  $112,500

GARDNER DENVER 1000(Ref#6444T)  Mounted on 1998 International truck with 466 diesel engine, 5 x 6 mud pump, 350 air compressor, stationary table, hydraulic pulldown,  450’ drill pipe, bits, subs, collars, working daily  Price:$212,500

MAYHEW 1000(Ref#1993R) Manufactured mid 1960"s, PTO, mounted on 1977 GMC 6500 with 366 gas engine, 5x6 GD mud pump, no air, 3" Kelly, 5-1/4" stationary table, hydraulic pulldown, mechanical clutches  Price on request

MAYHEW 1000(Ref#8497RA) completely refurbished, extended mast (28+") mounted on 1972 Ford with gas engine, 23" x 3" square Kelly, 5-1/4" stationary table, 3x4 centrrifugal mud pump, mechanical clutches, mechanical chain pulldown, rebuilt hydraulic cylinders, mud pan, rod box, 1 front & 2 rear hydraulic leveling jacks, fully tooled PRICE:  $52,500

MAYHEW 1000(Ref#316R)  Manufactured 1973, Midway 1300 drawworks, 2000 GD rotary table, 2" Little Giant swivel, 5 x 6 GD mud pump, chain pulldown, mounted on Fleetstar truck with V8 459 engine, 2 rear hydraulic leveling jacks, 29.5"L x 8.5"W x 10/5"H  27,000 lbs.  Price:  $65,000

GARDNER DENVER 1000(Ref#3178N)  top drive head, no mud, 600/125 air compressor, (table drive missing), mounted on 1983 Mack truck with 6V71 Detroit diesel, 4 jacks  Price:  $50,000

MAYHEW 1000(Ref#14011R) Manufactured mid 1970"s, mounted on 1984 International S1900 with DT466 engine, 13 speed, GD 5x6 mud pump (new chrome liners, pistons, rods, not used since re-done), 20" fluted kelly, 7 ¼" stationary table, GD developmental air compressor (needs work), mechanical pulldown 3 speed/reverse, pull down chains like new, water injection, pipe tub slide, 3 leveling jacks, breakout wrench, pipe tub slide, 80" of new 2 3/8" x 20" drill pipe and 300" used, drill collars, slips, some tools, ready to go, stored inside  PRICE:  $65,000

GARDNER DENVER 1000(Ref#9069R) mounted on 1960"s-70"s Mack with diesel engine, 5 x 6 mud pump, 100-SI Gardner Denver air compressor, Bean pump, 2 7/8" x 20" kelly, (kelly needs to be remounted), 7-1/2" retractable table, Planetary pulldown, mechanical clutches, breakout wrench, pipe rack, 2 rear hydraulic leveling jacks, 300" of 2 7/8" x 20" drill pipe, rig is apart, some rebuilding has been done  PRICE:  $57,500

GARDNER DENVER 1000(Ref#9505R) mounted on Mack truck, 5 x 6 mud pump, air compressor, 7-1/2" rotary table, rod rack, 3 leveling jacks  Price:  $50,000

MAYHEW 1000(Ref#10021N) mounted on Rio 6x6 with Cat 3306 rebuilt engine, Fuller 10 speed transmission, Gardner Denver 5 x 6 mud pump, Leroi 100s air compressor, 2000 stationary table, 3-1/2" x 23" Kelly, water injection pump, 500 gallon water tank, hydraulic pulldown, mechanical clutches, breakout wrench, 2 rear hydraulic leveling jacks, 200 of 2 7/8" x 20" drill pipe Price: $55,000

MAYHEW 1000(Ref#14358RA) Manufactured 1976, PTO, mounted on 1988 Chevy with diesel engine, 5 ¼" stationary table, 2 7/8" x 23" kelly, breakout tongs, 5 x 6 mud pump, no air, hydraulic pulldown, mechanical clutches, sandline, rod box, new tires & paint, 240" of 2 7/8" pipe  PRICE:  $57,500

MAYHEW 1000(Ref#289R) PTO, mounted on 1980 International 1800 tandem axle truck with new 404 gas engine, 5 ¼" stationary table, Gardner Denver 5x6 mud pump, chain pulldown, hydraulic bailing line mounted on mast, mechanical clutches, mechanical pullback, 300" of 15" x 2 3/8" drill pipe  Price, rig only:  $40,000

MAYHEW 1000(Ref#1001N) PTO, mounted on 1986 GMC Brigadier with Detroit 6V92 engine, 6x6 Wheatley mud pump, hydraulic pulldown, mechanical clutches, 7-1/2" stationary table, 3" fluted Kelly, toolbox, pipe rack, 2 rear hydraulic leveling jacks, has some hydraulic leaks, extra spare parts for pump, no pipe or tools available PRICE:  $37,500

MAYHEW 1000(Ref#9449N) late 1960"s-early 1970"s rig, Total rebuild on rig 2008, has drilled 15-20 shallow wells since rebuild,  PTO, mounted on 2000 International 4900 with DT466 engine, 5 x 6 mud pump, on board 400/250 air compressor, mechanical clutches, pulldown, 5 ¼" stationary table, 3-1/2" x 18" fluted Kelly, no breakout wrench, stored inside, new tires, 400" of 2 3/8" x 15" drill pipe    PRICE:  $79,500

MAYHEW 1000(Ref#2362N) PTO, mounted on 1971 White Constructor with 290 Cummins engine, 6 x 6 Wheatley mud pump, 580 CFM air compressor, custom made 42" mast, 36" Kelly, stationary table, mechanical clutches, pulldown, 1 front 2 rear hydraulic leveling jacks, no breakout wrench, no pipe or tools available  Price:  $42,500

MAYHEW 1000(Ref#15190N)  5 X 6 Wheatley mud pump, mounted on 1975 Ford 8000 truck, 225 hp Cat 3208 diesel engine, PTO, 10.00 x 20 new tires, 3-5/16" x 23" kelly, 2" Little Giant swivel, 5-1/4" non-retractable table, 3 part line, new-1/2" 19x7 wire rop, (2) new brakes on drawworks, 4 hydraulic jacks, hydraulic pulldown, 2 lockable tool boxes, new flud end on mud pump, steel mud pan, crown sheaves recently rebushed, rod box, 200" of 3-1/2" x 20" (2-3/8 IF) drill pipe, new paint currently drilling  Price:$70,000

MAYHEW 1000(ref#15185N)  mounted on 1980"s Freightliner truck with Cummins engine, PTO, chain pulldown, mechanical clutches, 2 rear hydraulic leveling jacks, 5-1/4" stationary table, 2 new rims for derrick and leveling jacks, gear box recently redone, mud pump removed, no pipe, running condition  Price:  $35,000

MAYHEW 1000(Ref#1853Na)  Mounted on Ford L9000 tandem axle truck with 671 Detroit diesel engine, PTO, 23" kelly and kelly bushing.  5 x 6 Gardner Denver duplex mud pump, mechanical clutches, pulldown, no turntable,  200" drill pipe  Price:$45,000

MAYHEW 1000(ref#9000N)  mounted on 1994 tandem axle Ford L9000 truck, 600/250 WAJ air compressor, LT10 Cummins (290 hp), 5 x 6 Gardner Denver mud pump, 5 speed rotary table, 360" drill pipe, new kelly, swivel, 5-1/2" stationary table, 2-7/8" x 23" kelly, Little Giant swivel, mechanical clutches, hydraulic pulldown, 2-7/8 FEDP x 20" pipe, breakout tongs, bankd new PTO,   Price:  $105,000

MAYHEW 1000 COMBINATION RIG(Ref#1790Na) Manufactured 1970, PTO, mounted on 1970 Chevy with gas engine, 5 x 6 Gardner Denver mud pump, 185 CFM on board air compressor with John Deere diesel engine, spudding arm, 5 ¼" stationary table, hydraulic pulldown, 3 hydraulic leveling jacks, 23" Kelly, 210" of 2 3/8" x 15" drill pipe, stabilizer    PRICE:  $32,500

GARDNER DENVER 1000(Ref#8303Na)  Manufactured 1970"s, mounted on Paystar 5000 tandem axle truck, 3208 Cat engine, self-dump mud pit, 3rd drum, 500 gal water tank, 5 x 6 mud pump, 250" of 2-3/8" Mayhew Jr pipe, 3 leveling jacks, 5-3/4" table    Price:$40,000

MAYHEW 1000(Ref#1551N)  mounted on 1963 Army 6x6 truck with gas engine, (no brakes, needs batteries) 4-1/2 x 5 mud pump, stationary table, mechanical clutches, hydraulic pulldown, breakout wrench, stabilizer, bits, subs, etc., fully tooled, 3 hydraulic levleing jacks, 450" Mayhew Jr drill pipe, stabilizer, 7-7/8" bit, paddle bit, 25"L x 8"W x 10"4"H, 27,000#      PRICE:  29,500

GARDNER DENVER 1000(Ref#1186N)  Manufactured 1979, Gardner Denver ADL 100/250 air compressor, 8" rebuilt rotary table, 3" x 24" fluted kelly hydraulic pulldown , mounted on 1978 Ford F8000 tandem axle truck with Cat 3208 engine, 120" of 3" x 20" pipe, subs,  Price:  $50,000

MAYHEW 1000(Ref#1830Nb)  Gardner Denver 667 air compressor, 3 x 2 centrifugal pump, 5-1/4" retractable table, 23" x 3-1/2" square kelly, pulldown, mechanical clutches, mounted on 1972 Ford F8000 truck with Cat 3208 engine, PTO, 400" of 2-3/8" x 20" drill pipe, 3 hyd leveling jacks, good condition, currently drilling  Price:  $75,000

MAYHEW 1000(Ref#14841)  5 x 6 mud pump, 350 cfm air compressor, 7-1/2" stationary table, 23" kelly, pulldown, breakout wrench, mechanical clutches, mounted on 1980 Ford F800 truck with 429 gas engine, 3 leveling jacks, 150" of 20" drill pipe, some tools, needs swivel and yoke, needs work    PRICE:  $16,500

MAYHEW 1000(Ref#10929)  1970"s, double drum, 5-1/2" GD stationary table, 4-1/2 x 5 GD mud pump, mounted on 1979 International truck with Cat 3208 diesel engine, 2 rear hyd leveling jacks, rod rack, new pulldown chains, shafts and bearings, rebuilt swivel. 300" of 15" Mayhew pipe (some 2-3/8, some 2-7/8) slips for both, currently drilling, good condition

MAYHEW 1000(Ref#8225)  1968, 4 x 5 Mission centrifugal pump, 5-1/4 set table, manual pulldown, 300" drill pipe, 4 hyd jacks, new shaft in mud pump, new gooseneck at swivel, on 1984 Mack Superliner with 350 Mack engine  Price:  $54,500

MAYHEW 1000(Ref#7337N)  mounted on Cat D7 crawler with gas pony motor, 8" wide w/4 sp manual transmission, 22" width tracks, Gardner Denver 580 air compressor (low pressure high volume), Bean water injection pump (12-15 gpm), 200 gallon water tank, Mayhew 1000 5-1/8" stationary table, 3 speed rotary transmission, 2" Mayhew swivel, double drum drawworks, 23" fluted kelly, hydraulic pulldown with 4 speed transmission, mechanical clutches, breakout wrench, rod rack, 140" of 2-3/8" x 20" drill pipe, ready to go   Price:$35,000

1000" MUD ROTARY CRAWLER RIG(Ref#3122T) Built 2019. Mud rotary crawler rig. Fully Guaranteed. Capacity 1000", 4" - 13" diameter. MTU Diesel engine: 4R 1000 C50, 5.1L 228HP. Torque at 1200 - 1600 rpm: 1400 NM. Climb ability: 25 degrees. Max height from ground: 12.6". Dimensions: 24" x 7" x 9". 19,500 lbs. Rotation speed: 0-100rpm. Rotation torque: 4130 ft/lbs. Lifting power: 13 tons. Lifting speed: 88 ft/min. Air pressure: 150-500 psi. Air consumption (SCFM) 565-1412. Mud pump: Input 74hp, suction diameter: 3.5", discharge diameter: 2.0". Flow: 158 gal/min, 232 strokes/min, 500 PSI. Located New York. Price: $335,000

MAYHEW 1000(parts rig, or can be fixed to work)  (Ref#11490Ta)  Mounted on Crane Carrier, 671 Detroit, 750/350 air compressor, no mud pump, 5" rotary table, chain pulldown, no drill pipe, 3-3/8" kelly  POR

MAYHEW 500(Ref#1691T)  Early 1960"s rig, 4-1/2 x 6 mud pump, developmental air compressor, 5-1/4" retractable table, 3" square kelly (not on rig, but available), 1250 Holemaster mast, needs transfer case, set up to run 20" Mayhew Jr pipe, breakout tongs, 2 rear hydraulic jacks, mounted on 1999 International 4900 single axle truck with DT466E engine, PTO, can remove rig from truck  Price on Request  (no pipe available)

MAYHEW 500(Ref#3374T)  5" stationary table, 4 x 5 Gardner Denver mud pump, developmental air compressor, 4" square kelly, hydraulic pulldown, mechanical clutches, mounted on 1990 GMC Kodiak truck with Cat 3208 engine, 3 hyd leveling jacks, pipe rack, 220" of 2-7/8" x 15" drill pipe  Price:  $49,500

MAYHEW 500(Ref#6196T)  Manufactured 1970, 30" mast above table, 4-1/2 x 5 duel piston pump, 5-1/4" retractable table, mounted on 1987 Ford F700 single axle truck, 370 gas engine, 3 leveling jacks, chain hydraulic pulldown, no drill pipe (uses 20" joints), rig needs rebuilding, needs new truck  Price:  $37,500

GARDNER DENVER 500(Ref#3891R) Manufactured 1980, mounted on 1998 Freightliner FL70 with diesel engine, 5x6 mud pump, no air, 3 3/8" x 18" square Kelly, 5-1/2" stationary table, hydraulic pulldown, mechanical clutches, breakout tongs, pipe rack, 4 hydraulic leveling jacks, runs 2 7/8" x 15" Mayhew Jr pipe (some avail)  Price:  $49,500

GARDNER DENVER 500(Ref#3774RA) mounted on 1990 International with DT466 engine, 4 1/2 x5 GD mud pump, big GD air compressor, 6 ¼" retractable table, 18" kelly, approx 200" of 2 3/8"IF drill pipe, many extras  Price:  $57,500

MAYHEW 500(Ref#1271N)  Manufactured 1979, on original 1979 Ford F7000 truck, recent new 3208 Cat engine, clutch, rear, springs and tires, 3 lines (sandline, tool line, kelly lines), 3 leveling jacks, 5-1/4" retractable table, 32" mast, 23" fluted kelly, 5 x 6 Gardner Denver mud pump, stored inside, 300" of 2-7/8 IF x 15" drill pipe, no air, mechanical clutches, pulldown, 3 leveling jacks   Price:  $55,000

GARDNER DENVER 500(Ref#13403)  Manufactured 1978, 5 x 6 mud pump, 32" mast, 2" Little Giant swivel, 23" kelly, 5-1/4" non-retractable table, mounted on 1980 International 4600 single axle truck w/DT466 diesel engine, PTO, chain pulldown, breakout tongs, 3 hyd leveling jacks, 200" Mayhew Jr 15" drill pipe, good condition  Price:  $55,000

GARDNER DENVER 500(Ref#11158Na)  factory mounted on D-4 Caterpillar, 4 hydraulic jacks, 4-1/2 x 5" Gardner Denver mud pump, Gardner Denver 427 cfm air compressor, 13" kelly, 4-1/2" retractable table, 1-1/2" swivel, good condition, needs paint  Price:  $30,000

MAYHEW 500(Ref#8933T)  Late 1970"s rig, truck burnt up and rig is good, 5 x 6 mud pump, developmental air compressor, 5-1/4" stationary table, 3-1/2" kelly, no breakout wrench, mechanical clutches, chain pulldown, 4 hyd leveling jacks, pipe rack, 200" of 2-3/8" IF x 20" drill pipe  Price:  $9,500

MAYHEW 500 DRILLING RIG(Ref#1907T)  5 x 6 mud pump, 2" swing, 18" kelly bar, 4 jacks, 5-1/4" stationary table, sandline, mounted on 1992 GMC Topkick 427 gas engine, 150" drill rod, tools and subs, pipe rack  Price:  $45,500

MAYHEW 250(Ref#10370RA) mounted on Chevy with 327 gas engine (should be remounted), 2x3 centrifugal mud pump, 5" stationary table, 10" Kelly, rod box, mechanical clutches, chain pulldown, no air, no breakout wrench, no leveling jacks, 100" of 10" x 2" rods  Price:  $17,500

MAYHEW 200(Ref#2782N)  mounted on Ford 1 ton truck with new 7.3 liter diesel engine (less than 5000 miles), 4-1/2 x 5 mud pump, 9" stationary table, mechanical clutches, no pulldown, 2 rear hydraulic leveling jacks, 100" of 2-3/8" x 10" pipe, rig has been sitting 2 years  Price:  $35,000

GARDNER DENVER 18T DRILL RIG(Ref#7125T)  Mounted on Ford tandem axle truck with Detroit 8V71, standard transmission, Detroit 6V71 deck engine, 500/200 air compressor, table drive, drills with air and tricone bit, rod box, 300’ of 3” x 20’ drill pipe, 22’ mast, stored inside, running condition, dimensions 35’ x 10’6” x 8’W 36,000 lbs  Price:  $32,500

MAYHEW JUNIOR(Ref#2534T)  Trailer mounted, 2 x 4 mud pump, Slant 6 300 cu/in Dodge gas engine, stationary rotary table, 1 front and 2 rear screw jacks, rod box, 2-1/2” x 10’ pipe, bits  POR

AugerBoostersBucket RigCableCompressorsMiscellaneousMud Grout PumpsParts ToolingPump HoistRotaryRotary A-BRotary CRotary DRotary E-FRotary GRotary H-IRotary J-LRotary MRotary P-QRotary RRotary SRotary T-ZSeismicSoldSteelTruckWater Truck Keyword:

2008, HTB; Model:2500; Compressor:N/A; Mud Pump:See Below; Engine:165 HP 6-Cylinder John Deere Diesel; Mounted On:Trailer; Truck Engine Make:N/A; Tools/Options:HTB 2500 Year: 2008: PRICE REDUCED Double Drums/Double Brake Banks on each Drum, Has Triple 16" HC Clutches with 18" Air Bags over the Plates. HT 12" Retractable Rotary Table, 55" Free Standing HTB Derrick, Rig is on 4-Lines and has been Pull Tested at 80,000#. Diesel Engine with 4-Speed Transmission. Rotary has a 5-Speed Transmission, 4 Leveling Jacks (8"X36), Spinning Chain, Hydraulic Wireline Unit and Counter (Halliburton), Near New 3" HD DSM Swivel on Tracks, Track Run by Air. All 3" Plumbing with Oilfield Hoses, Small Sub, Mats, 140 bbl. Mud System with Shaker and Desander Cones, 150 kW CAT Generator and Controls, 10,000 Gallon Water Tank with Water System, (2) Continental Emsco D-375 Pumps with 500 HP CAT Engines, Air Clutches, Guards, Rod Oilers. 3,500" of 3.5" IF Drill Pipe and (6) 6" Collars. Drill Pipe Handler that is on a Float, Carries 55 Joints of Pipe and (2) Drill Collars. Hydraulically Run, Plugs into Rig. Doghouse and Fuel Tank Mounted on Float, Living Quarters for Crew with 6 kW Generator and Water & Sewer System.. Condition:

1979, Ingersoll Rand; Model:TH-60; Compressor:750/250; Mud Pump:Gardner Denver 5X6; Engine:PTO; Mounted On:1979 International Paystar 5000; Truck Engine Make:Detroit 8-92T Silver; Tires:Near New; Condition:SOLD; Tools/Options:Ingersoll Rand TH-60 Year: 1979: SOLD 2nd Owner, Deep Hole Package 32,500# Pullback, Bean 18 GPM Injection Pump with Oil Injection, Standard 34" Mast, 9-Rod Carousel, 3.5" IR Drill rods. Detroit Engine was a Factory Rebuilt Exchange in 2005/6, Square Tube Tower always bolted when up. Upgraded with Near New 11R 22.5 Rear Wheels and Tires, New 425/55 R22.5 Super Single Steering Wheels and Tires. 2-Speed Gear-Matic 35 Casing Winch Line is 18,000# Bare Drum, 3-Speed Pullback and 2-Speed Rotation. High Speed Spindle Rotation is 240 rpm @ 2,500 ft./lb. Torque, Low Speed 120 rpm @ 5,000 ft./lb. Nice Straight Operator Platforms and an Added Lower Table Hinge. 75 Gallon Highway Fuel Tank and a 180 Gallon Off Road Fuel Tank with DOT Approved Connections. New Pullback Cables 6 Months Ago. Was working daily - no help available. Parts Manual Available. Approx. 1,000 of 3.5" X 20" IR Long Flat Drill Pipe with 2-3/8" Threads available for an extra cost. O.D. measures a little over 3-15/32", Good Condition is Available for an Extra Cost. May be a few 15"ers. SOLD

1985, Ingersoll Rand; Model:TH-60 Long Tower; Compressor:IR 750/250 - Rebuilt; Engine:PTO; Mounted On:1985 GMC General; Truck Engine Make:8V92T 475 HP; Condition:Good PRICE REDUCED; Tools/Options:Ingersoll Rand TH-60 Long Tower Year: 1985 : PRICE REDUCED One Owner. 7-Rod Carousel, Rod Box Holds 13 Rods, Rig is Set Up to Run 4.5" X 2-7/8" IF Drill Rod. Approx. Hours since Replaced New/Rebuilt: Motor: New - 4,000 Hrs., Trans: New - 3,600 Hrs., Compressor: Rebuilt - 3,500 Hrs., Cooler: New - 2,750 Hrs., Cotta Box: Rebuilt - 600 Hrs., Slide Box: Rebuilt - 250 Hrs., Main Pump: Rebuilt - 2,000 Hrs., Sundstrand Rotation: Rebuilt - 2,500 Hrs., Rotary Head Motors: - 500 Hrs., Water Injection Pump: CAT 1010, King Swivel: K-15 - 250 Hrs., Hammer Oiler, Additional Mud Piping. Truck has a 13-Speed Transmission, 20,000# Front Axle, 46,000# Rear Axle, Rear Tires 95%, Front Float Tires 98%. TH60 Manual Available, Rods Available. Also Available - (1) Slide Box that needs Rebuilt, (1) IR 750/250 Compressor End that needs Rebuilt.

1982, Ingersoll Rand; Model:T4W DH; Compressor:900/350; Engine:Detroit 12V71TT; Mounted On:CCC; Truck Engine Make:Diesel; Condition:Working Daily; Tools/Options:Ingersoll Rand T4W DH Year: 1982: 70,000# Pullback, Worm Gear Power Head with Two Motors, CAT 3 Piston Water Injection Pump, Hammer Lubricator, Two Winches, 7X4 Carousel, 18" Table Opening. Rebuilt Top Swivel, New Seals Pressed into Rotary Head, New Rotary Head Oil, Newly Rebuilt Undercarriage, Rebuilt Hendrickson Suspension, Multiple Cylinder Rebuilds, Multiple Hoses Replaced. 2,000" of 4.5" X 25" Drill Pipe available for an Extra Cost.

Honghua; Model:HH-ZJ40DBS; Compressor:None; Mud Pump:See Below; Engine:See Below; Condition:Purchased 5 years ago Never Used; Tools/Options:Honghua HH-ZJ40DBS: Two Drills Available, Purchased 5 Years ago and Never Used, Turned on or Tested. Was part of a set of four, Two have been sold and they were Tested and Worked Perfectly. Each Rig comes with 8 CAT Generators. Helicopter Transportable Rig with 3,000 Kg Loads, Drilling Depth Capacity of 12,000". 146" Mast, Static Hook Load Capacity 716,800#, 6-Pulley with Perforating Cable Crown Block Maximum Load Capacity 716,800#, Monkey Board Capable of DP 5" Range II with Fall Protection Harness System and IR Man Rider Winch, 320 Ton Rotary Table Beam, Height of Drill Floor is 25", Prepared to Receive Walker System Removable by Pins, Moveable in Two Axis. Pin Drive Type Rotary Table with Opening Diameter of 27-1/2" Maximum Rotary Speed of 220 RPM and Maximum Static Load of 1,000,000#. Disc Brake Type Drawworks actuated by 2 Electric Motors with Minimum 870 HP each and Bit Feeder System. Emergency Shutdown Installed in the Doghouse. YM-16 Cathead, 6-Sheave Traveling Block with Maximum Static Load Capacity of 790,000#. Hook Built to API Spec 8C with Maximum Load Capacity of 790,000#. US Warranty/US Bearings. Includes BOP"s 3-1/2" - 4-1/2" IF, DP Elevator 3-1/2" - 5", Pipe Spinner, Manual Slips and Automatic Slips, Casing Spiders, Side Door, Elevators, Aux. Elevators, Slips, Tong, Mud Saver. 8 Sets of CAT Generators 455 kW/60Hz/480V with Soundproof Enclosures, 2 Sets of Cooltech Generators Rated at 200 KVA, SL450 Swivel with Max. Static Load of 1,000,000# Max. Dynamic Load of 630,000# and Max. Rotary Speed of 300 RPM. Kelly Spinner Made by International with Max. Torque of 1,80 ft lbs. and Max. Speed of 150 RPM. Model ST80C NOV with Tubular OD Range of 4-1/24" to 8-1/2" and Drill Pipe Range of 3.5" to 5/5". Type C Drill Pipe tongs with Jaws from 2-7/8" to 5", Type DB with Jaws from 5" to 9-1/2", Type B Casing Tongs from 3-3/8" to 12-3/4" and Hydraulic Drill Pipe Power Tong Made by ECKEL with Hydraulic Backup. 3 Sets of Blowout Preventers, BOP Accumulator, Choke Manifold. 3-Sets of Heli-Transportation Triplex Single-Acting Piston Type Mud Pumps, 6.5" X 9", 3 Sets of Shale Shakers, Mud Cleaner, Degasser, Decanter Centrifuge, 13 Sets of Mud Tanks, Cargo Handling System. Siemens Mud Pits Volume Sensors, WOB Indicator, Torque Indicator, Tong Torque Gauge, Mud Pump Indicators, Bit Tracking System, Digital Drilling Recorded, NOV Deviation Survey Double Recorder, Honeywell Gas Detection System. Diesel Fuel Reserve of 190 bbl. Water Treatment System for Filtering, Purification, Chlorination and PH Control for Daily Water Consumption for the Camps. No Drill Pipe Included.. Condition:

1980, Model:HT-2000; Mud Pump:8X6 Mission; Engine:Detroit 6V53; Mounted On:Trailer; Condition:Ready to Drill; Tools/Options:HT 2000 Year: 1980: All Mechanical, Table Drive Rotary Rig, 18" Table, Mast is approx. 45", Kelly 35", Includes approx., 820" of 4.5" Bottleneck Drill Pipe, Drill Collars, Bits, Hole Openers. More Pipe available. Deck Engine Rebuilt in 2000

2008, Howard Turner; Model:3KDD 5KDD MUSTANG; Mud Pump:Auxiliary GD FZ-FXZ; Engine:CAT C7 260 HP; Mounted On:50" Tandem Trailer; Tires:11R 24.5; Condition:Excellent; Tools/Options:Howard Turner 3KDD 5KDD Mustang (2008): Allison Transmission, Drawworks has PO3-10 Twin Dish Clutches, 8X28 Brakes (2 per drum), 14" Drums, Leabus for 3/4" Cable, 25,000# Single Line Pull, 40,000# Double 120 Chain. 62" X 6" X 3" Mast, 150,000#, Crown has Two 18" Sheaves, Four 15" Sheaves, Six 5" Sheaves, Two 8" Sheaves Winch Line, One Anker Dead Line & Load Cell for 3.4" and 1/2" Cable. 12" Howard Turner Rotary Table, Howard Turner 3" Water Course Swivel, HTB 100 Ton Blocks, Mud Lines, Jib Winch, Water Cooled CAT Engine, Hydraulics: 20 GPM, 2000 psi, PTO Driven from Allison Transmissi