howard turner rotary table in stock

Manufactured 2008, 104’ x 315,000# derrick, single drum with 8 lines 1-1/8” wire, dual 6’ hydro breakout, Ideco 7-1/4 x 15” duplex mud pump with 353 Cat engine, 150 ton swivel, 4-1/2” x 40’ kelly, (8) 6-1/4” collars (new), 5000’ of 4-1/2” 1660 X-hole drill pipe Double White, (2) 300 bbl mud pits, 150 bbl water tank, doghouse, 12’ substructure with 18” rotary table, center tub with v-door, (2) pipe tubs, 42” x 30’ pipe rack, (2) landing mats for rig and sub, (2) 6’ elevator links, 4-1/2” 150 ton elevators, (2) sets of slips, rat hole digger with boot, (2) Type B BJ tongs  Price:$390,000

Refurbished, excellent condition, 10" boom extension, 6 x 10” Gardner Denver mud pump, Detroit 8V91 engine (rebuilt with low hours), 13” retractable table, 4 part kelly line, 4 part tool line, separate sand line, hydromatic brake, air clutches/throttle, weight indicator, 3” King swivel, 5” x 27’ hexagon kelly, automatic pump oiler, mud standpipe, air standpipe, reverse standpipe, 12VLED lighting, derrick mounted ladder with safety system, all bushings and wear items are brand new, mounted on brand new custom trailer  Price:  $370,000

GES 1600 hp AC Drawworks, grooved for 1-3/8” drill line, powered by 1500 hp continuous 1830 hp intermittent AC drive motor.  GES 136’ x 750,000# static hook load capacity derrick when strung on 12 lines, 19,500’ racking capacity of 5” drill pipe and (4) stands of 6.5” drill collars -or- 23,400’ of 4-1/2” drill pipe and (4) stands of 6.5” drill collars.  (allows skidding of mast and substructure up to 25’ without moving rest of rig).  GES hydraulically raised substructure 26’ floor height, 22.5’ clear working height under rotary beams, 750,000# casing capacity, 505,000# setback capacity for a combined load capacity of 1,255,000 lbs.  drill floor 40’ x 21.5’, air conditioned driller’s cabin, GES electronic driller with interface for other electronic drilling systems if desired.  400 ton travelling block with (6) 42” sheaves grooved for 1-3/8” drill line, CANRIG 1036 top drive, 27-1/2” rotary table driven by 1150 hp cont/1400 hp intermittent AC drive motor, (2) BOMCO 1600 hp mud pumps 12” stroke p/b 1500 hp AC drive motor (upgraded to 7500 psi).  900 bbl mud system (self-elevating equipment skid, round bottom mud cleaning tank, round bottom suction tank, mud mixing skid, mud gas separator/trip tank skid).  (3) Brandt dual King Cobra shale shakers with Brandt fluid conditioner, Brandt dual King Cobra shale shaker, 16 desilter cones, dual desander cones, Brandt vacuum vessel degasser.  Cat 1750 kva 600 volt generators with (3) CAT 3512C diesel engines.  13-5/8” x 10,000# Cameron double type U ram BOP, 13-5/8” x 10,000# Cameron single type U ram BOP, 13-5/8” x 5000# annular BOP with remote driller’s closing panel, Koomey Type 80 7-station 22 bottle accumulator, 10,000 psi choke manifold.

15 load drill rig (2 loads drill collars), 10,500’ (3200m) (Jacknife Triple) depth, 16’ KB to ground, 12.9’ bottom of table beam to ground, National 370M drawworks, Parmac V80 auxiliary brake, Detroit Series 60 diesel engine, 14L, with Allison 6061 transmission (600 hp max power), 510 Dreco 127’ x 340,000# derrick, Dreco one piece center load substructure 53’ x 13.5’ x 14’, 20,000# max pipe setback, Dreco crown block, National 435 G175 block/hook, National P200 swivel, 1” x 5000’ drilling line, National C175S 17-1/2” rotary table, Kobelt spring applied brake caliper, (2) National 8P80 triplex 5-1/2” x 8-1/2” mud pumps with Detroit Series 2000 diesel engines, mud tank with 4 compartments:  440 bbls with mud hoppers, mud guns, agitators and transfer pumps.  Brandt shale shaker, Oilco accumulator, choke manifold, (22) 6” x 30’ x 4 H90 drill collars, (2) 9” x 30’ x 7 H90 drill collars, water tank, light plant, standby light plant, Foster 77 kelly spinner, Hawk Spinmaster 550H pipe spinner  Price:  $990,000 CDN

TSM 500 right angle gearbox, National 17-1/2” table, hydraulic catheads, electric/hydraulic pump, (2) Pullmast PL8 hydraulic winches, Leroi 550 air compressor, 80 gallon air tank c/w dessicant dryer, Detroit Series 60 diesel egine (665 hp), Allison 6061 transmission  Price:  $95,000 USD

Single drum drawworks, mounted on 3 axle trailer, 6V71 Detroit diesel engine, 96’ hydraulically raised mast, Gardner Denver FQ-FXQ 5-1/2 x 16" mud pump with air clutch powered by Detroit 6V71 diesel engine, mud mixer, 11’ x 8’ x 16’ sub, 17-1/2" Brewster rotary table, 4-1/4" x 40’ square kelly and kelly bushing, 21’ kelly hose pipe, 7/8" cable right hand lay 985’, handling tools, tongs, elevators, slips, elevator links, BOP, (3) 6" x 30’ drill collars, (45 jts) 4-1/2" XH 16.60# Grade E drill pipe, 2 Wilson tongs, 125 ton Skytop block and hook, 100 ton swivel  Package Price:  $315,000  Price, rig only:  $220,000

Cummins 350 diesel engine on deck. TwinDisc torque converter with 24" Wichita clutches. 70" hydraulically raised mast, new 2018 with sliding crown. (2) mud pumps, Gardner Denver FXN 7¼ x 14 with 6" liners powered by 525 Cummins diesel engine (new 2 years ago), air clutches, mounted on oilfield skid. Standby pump: Gardner Denver 7¼ x 12 with single Detroit 6V71, air clutches, mounted on oilfield skid. Drill pipe trailer with 38’ kelly, bushings and (13) 6” drill collars,  100 joints of 4½” x 30" steel double white band pipe, 100 joints 4” x 30" aluminum pipe.  All necessary subs and handling tools, including Drillograph straight hole tool, weight indicator. (2) Brewster travelling blocks. 18” Brewster table. (2) generators with lights. Excellent condition. Price: $325,000

SHOP BUILT 6000’ DRILLING RIG(Ref#2918Ta)  Trailer mounted, Cat 550 hp engine, 17-1/2” Oilwell rotary table, 7 x 14” mud pump with Cat engine, 4-1/2” kelly

Challenger 360 drawworks (500 HP) (rated to 6,500" with 4 1/2" drill pipe), (1) Series 60 12.7 liter 500 HP, Challenger 200 - 84" H - 300,000# SHL derrick,, 10" adjustable substructure, HT - 18" x 44" rotary table, Not used since 2018.  Price:  $180,000 Price with Venturetech top drive:  $245,000

Built 1980, 64’ x 150,000# capacity derrick, crown block, double drum drawworks, 475 hp, Lebus grooved for 7/8” line, Foster automatic make up and break out catheads, Cat 3408 engine with Allison CLT-750-2 transmission, Howard Turner 18” rotary table, split master bushing, 75 ton hook block, 50 ton 3-sheave travelling block, Howard Turner SW35-100 swivel, elevator bails, 4-1/4” square hacker kelly with upper kelly cock, mounted on back-in 3-axle trailer with detachable tag axle, 8’w x 45’L x 48”H substructure , 90” working height below base of rotary table to GL, stairs, safety rails, Ellis Williams 15W600 5-1/2 x 15” duplex pump with K20 pulsation dampener p/b Cat D3408 on oilfield skid, Continental Emsco D300 5-1/2 x 14” duplex mud pump MATTCO fluid end, PD55 pulsation dampener p/b Cat 3408 engine on oilfield skid, Ellis Williams 15W600 5-1/2 x 15” duplex mud pump K20 pulsation dampener p/b Cat D379 engine on oilfield skid, doghouse/generator, back up generator, mud tanks systems, Regan 8” 3000 annular BOP, rotary hose, suction hose, vibrator hoses, pipe tubs, elevators, pipe racks, geologist trailer, water stage, shale pits, approx. 4,960’ S135 Range 2 drill pipe, drill collars  Price:  $850,000

Manufactured 1975. Single drum drawworks, trailer mounted, 75" telescoping mast, Hacker rotary table, set up for reverse air drilling, 6" kelly, kelly hose, 2" air hose, 12,000# working winder, wireline winch, tongs, counterweight, substructure, doghouse, tongs. Just completed a job in 2020 PRICE: $110,000

Manufactured 1982, 7-1/4 x 14” mud pump, 100 ton block, 17-1/4” rotary table, 2 engines (Cat and Detroit diesel), single drum, mounted on 3-axle trailer, located Mexico  PRICE:  $245,000

Manufactured 1982, 7-1/4 x 14” mud pump, 100 ton block, 17-1/4” rotary table, 2 engines (Cat and Detroit diesel), single drum, mounted on 3-axle trailer, located Mexico  PRICE:  $245,000

CARDWELL KB200 DRILL RIG(Ref#13685Td)  Double drum, air clutches, 75’ mast, 28" table, Detroit diesel engine, centrifugal mud pump on deck, comes with 7-1/4 x 14 National duplex mud pump with 500 hp Cummins engine mounted on low boy trailer, 1200’ of 5-1/2" Reg x 30’ pipe on 40’ Hobbs trailer  Price:  $190,000

Drawworks mounted on 5 axle Crane Carrier, rated 8000-9000’ with 4-1/2" drill pipe, 550 hp Cat 3406 engine, 103’ telescoping mast, Ellis Williams 14" duplex mud pump with all new parts and fluid end including liners, heads, valves and setas and pony rods p/b 475 hp Cat engine, 5000’ of 4-1/2" drill pipe, subbase with rotary table, rig ramp, top and bottom crew houses, 40 kw generator Magnaplus powered by 4 dcyl Perkins engine, 300 bbl water tank, center walk tub, 3 pipe tubs, 12 drill collars, elevators, slips, rotary tongs   PRICE REDUCED:  $475,000

Mounted on 2006 Kimble 5 axle carrier, Detroit Series 60 diesel engine, Allison CBLT transmission, 51’H x 385,000# SHL super Single Mast, Spencer Harris crown assembly, 15PS King 150 ton power swivel, rotary hose, air mud fuel lines, Foster catheads, mounted on 2006 Kimble 5 axle carrier, drop box, folding walkways, safety rails. Mast currently off – being reworked. Located Texas Price: $575,000

Manufactured early 1980"s, triple drum with sandline, rebuilt drawworks, recent rebuild on engine, trailer mounted with twin Detroit 471 turbo engines, 56" mast, 100,000# pullback, 7 x 10 GD mud pump, 35" x 4-1/2" square Kelly, 18" Howard Turner rotary table, cathead, no pulldown, air clutches, spinning chain, racking board, 4 hydraulic leveling jacks PRICE: $250,000

DMS 800hp drawworks, (2) Cat 3406 diesel engines (450 hp each) with twin torque converters with Quad Parmac hyd., 107" x 300,000# Butler & Parks cantilever derrick, 8"H x 40" x 14"W Butler & Parks substructure with 3" pony subs, Wilson 600 mud pump with Cat D379, Wilson 600 mud pump with Cat D353, Dorland 3000# Bladder BOP Schraffer double ram 3000# psi and 3-station closing unit, 24" x 44" Oilwell rotary table, 250 ton Emsco swivel, Bear with hook weight indicator, Satellite auto driller, single pin Star recorder, 7500" of 4-1/2" x 31" 16.60# Range 2 drill pipe, (13) 6-1/4" drill collars, generators, wireline, 250 ton Sowa block, double life single screen shale shaker, 4 x 5 Mission desander, 350 bbl water tank, 4000 gal fuel tank, (2) steel pits with shalke shaker and desander 500 bbl total cap, mud house with 2 mud mixers and slug tank, derrick bolster, pipe boxes, catwalks   Price:$395,000

Gardner Denver 5-1/2 x 6 mud pump, 350x600 LeRoi air compressor with spare compressor for parts, 44M drawworks with spare 34M drawworks, injection pump for air drilling, Midway retractable rotary table, extended derrick with racking b oard to stand back drill pipe, both kelly block and hoist block are 4 line 19 x 7-5/8 non rotating with 2 spare spools (one 255’ for kelly and 275’ for hoist block), mounted on 1999 Kenworth tandem axle truck with Cat 3406E Cat engine, PTO

WILSON MOGUL 38 DRILLING RIG(Ref#8645RA) Manufactured 1980, trailer mounted with 60 series Detroit engine, mounted on sub frame, truck is included, 75 ton block, 68" telescoping mast, 18" stationary rotary table, 46" x 4 ½" Kelly, air clutches, no pulldown, breakout tongs, 4 hydraulic leveling jacks, no pipe available  Price $70,000

Built 2003, 100’ x 230,000# Pingo telescoping hydraulically rasied and scoped mast, New Tier 3 14L Detroit 60 Series engine (320 hours) 520 hp, Allison transmission, new radiator and hydraulic cooling system, new hydraulic table drive motor, new hydraulic pump drive for rotary table, new crown swing boom for racking board safety restraint, double drum 230,000# mechanical drawworks, air disc brakes, 27-1/2” Oilwell rotary table on detachable sub base, tongs, slips, dog collar, new hydraulic make up and breakout systems, 2 hydraulic aux winches, SAWA travelling blocks, weight indicator and tong torque system.  Rig and components are in excellent working condition, rig mounted on 3 axle semi chassis with hydraulic outriggers, HD steel beams for rig foundation/support.  Rig built to pull 60’ strings and rack in mast 4-1/2” drill pipe.  Price:  $625,000

Built 2008, 96’ x 240,000# Eagle hydraulically raised and scoped mast, mounted on 5 axle carrier, Detroit 60 Series 14L Tier 3 engine (600 hp), 5800 Allison transmission with drop box for rig and drive operation, new hydraulic cooling system for rig, new hydraulic table drive motor, new hydraulic table drive pump, new Hopper T Box drive for drawworks and table pump drive, double drum 240,000# mechanical drawworks, new crown swing boom for racking board safety restraint, new hydraulic make up and breakout systems, tongss, slips and collar, new racking board, new hand rails, new front tires and wheels, new cables, 2 aux hydraulic winches new or rebuit weight indicator and tong torque system, mud system plumbing new, new hydraulic lines  rig designed to pull 60’ strands and rack in mast, 4-1/2” drill pipe, new steel beams for rig foundation, support, rebuilt hydraulic outriggers, rig converted to drilling rig in 2017 and drilled 300’ test well.  10 hours total usage since.  Like new condition  Price:  $750,000

Built 2010, Cat 3412C DITA diesel engine, 52’ x 220,000# derrick, 4 sheave crown, 550 hp top drive, 20-1/2” rotary table, 16’H substructure with 24” clearance between mast to well center, (2) Drillmec 7TS600 7 x 8 triplex mud pumps 600 hp p/b Cat C18 diesel engine, mud system, diesel tank, water tank, 11” x 5000 psi Hydrill double BOP, Shaffer 5000 psi GK annular BOP, accumular closing unit, generators, hydraulic torque wrench, power tongs, instrumentation, hydraulic pipe handling, 6500’ of 4” S135 drill pipe  Price:  $4,375,000

Built 2013, Cat C18 ACERT DIT-ATAAC diesel engine, 52’ x 400,000# derrick, 8 sheave corwn block, 1000 hp top drive, 27-1/2” rotary table, 25’ H substructure with 23’ clearance clear height under rotary beams, (2) Drillmec 9T-1000 9 x 8 mud pumps p/b Cat 3512 engines, mud system, diesel tank, water tank, 11” x 5000 psi Hydrill double BOP, 5000 psi Shaffer GK Annular BOP, accumulator closing unit, generators, power tongs, hydraulic torque wrench, instrumentation, hydraulic pipe handling, 14000’ of 4” S135 drill pipe  Price:  $7,500,000

10,000" capacity, 14" KB,  Emsco GB500 drawworks p/b (2) 3408 Cat engines (800 hp),  Lee C. Moore 134" derrick, 11" x 24" x 46" substrcuture, 40" kelly, Ideco 2-1/2 x 53" table, swivel, Web Wilson tongs, Brewster 750 mud pump p/b Cat D353 engine, Emsco D700 mud pump p/b Cat D353 engine, 600 bbl mud pits, 3) Cat 3406 245kw light plant, 18 drill collars, 5000" drill pipe, 16" x 10" doghouse, 25" x 10" change house, 5-1/2" x 46" catwalk, 1 set pipe racks, 6000 gal fuel tank, 250 bbl water tank, stacked since Dec 2017, ready to work  Price:  $245,000

Built 1990, 17-1/2” rotary table, 2 sectional mast, kelly, kelly bushing, cathead, mounted on 5-axle carrier, duplex mud pumps, 10” x 12” (2) Detroit 6V71 engines   Price:  $295,000 USD

5500" depth capacity, U34 drawworks powered by Cat 3406 (400 hp), 97" Lee C Moore Derrick, Lee C Moore 16" x 42" x 8" substructure, Ideco MM550 mud pump p/b N14 Cummins (475 hp) 6" x 16" liners, 40" kelly, 7" x 46" cat walk, PZ 17-1/2" x 44" table, Martin Decker weight indicator, Web Wilson tongs, Gardner Denver 125 ton swivel, 150 ton Emsco blocks with Web Wilson hook, 135 kw John Deere light plant, 80 bbl premix powered by 371 Detroit (6" x 8"), 17 drill collars 6" x 2-3/8" x 30" w/4-1/2 X hole connections, 5000" drill pipe, 16" x 10" doghouse, 3 pipe baskets, 2 sets 28" pipe racks, 3200 gal fuel tank, 300 bbl water tank, 10" KB.  Rig has been stacked since Dec 2017   Price:  $245,000

GARDNER DENVER 2000(Ref#7109T)  Manufactured 1978, 5-1/2 x 10 Gardner Denver mud pump, cathead, chain pulldown, 56" mast, 10" table, mounted on 4 axle Crane Carrier, Cummins 400 engine  Price:  $200,000

Manufactured late 1970"s, completely rebuilt 2008, 58" x 100,000# mast, manual brakes with capacity of six part line both drums, 7-1/2 x 10" Gardner Denver mud pump, 4-1/2" x 38" kelly, 10" retractable table, 3 leveling jacks, mounted on 4 axle Crane Carrier with 350 Cummins PTO engine, complete rebuild including new mud pump gear end, major renovations on carrier, up to 3000" depth capacity  Price:  $195,000

Cabot Franks Explorer drawworks, Detroit 60 Series diesel engne, 3 axle trailer, 6 speed Allison 5860 transmission, 96" x 250,000# Cabot mast, 4 sheave Cabot crown with Lebus grooving, 160 ton Ideco Shorty block, 125 ton Ideco Swivel, 40" square kelly, (new) 45" long 5000 psi kelly hose, 17-1/2" x 44" Oilwell table with bushings, 10"H x 300,000# capacity Cabot substrcuture (3-piece), 5" x 3,000# Cabot pony sub, 5000" 4-1/2" flush joint drill pipe, (6) 6" x 20" drill collars (3 spiral), 4-1/2" 150 ton BJ elevator,  (2) mud tanks, shale shaker, catwalk, dog house, many extras Price:  $500,000

(2)  3406 Cat motors w/Allison torque converters & Allison 6 speed transmissions, 113 ft. x 278,000# Ideco derrick,  Cabot 13 ft scissor type substructure 350,000# rating, 17-1/2 in rotary table

IDECO H37 BACK IN RAMBLER DRILLING RIG  Mounted on a 5 axle carrier, powered by a 550 h.p. Detroit 12V 71 motor.  Equipped with Parkersburg hydramatic brake, derrick is removed and not avaialble, telescoping substructure (telescopes from 9" - 12"), Oilwell 17-1/2" rotary table, rig can rack 7000" of 4-1/2" drill pipe and (24) 6" collars, Martin Decker weight indicator, hydraulic hoist with 5/8" line mounted on rig

Oime SD7E drawworks with Wichita 2-36 KKB disc brake, powered by (2) GE 752 traction motors, IEC SCR I-drive power system,  147" x 750,000# SHL derrick with integrated top drive NOV-TDS11 SA 500 ton, 20,000" racking capacity, 1-3/8" EIPS drill line, 27"H self-elevating substructure with 24" clear height under beams, simultaneous rotary capacity of 750,000# and 400,000# setback, 27-1/2" rotary powered by (1) GE 761 traction motor, 350 ton American block, (2) 1600 hp Lewco WH1612 triplex pumps each driven by (2) GE 752 series traction motors, (2) tank 1000 bbl mud system, (2) cone desander, (12) cone desilter, vacuum degasser, 4-1/16" x 2-1/16" 5000 psi choke manifold, (1) 300 bbl water tank, (1) 9000 gal fuel tank, NOV Iron roughneck ST80C, hydraulic catwalk, 30 ton BOP handling system, Bi-directional walking system  Price: $2,800,000

Manufactured 1980, Triple drum, 58" derrick, 18" rotary table, 8V71 Detroit diesel, 4-1/4" x 39" kelly, KG50 King swivel, 4 lines 3/4" line, mounted on 3 axle trailer.

Rated to 8500" with 4-1/2" drill pipe, MAC 400 drawworks with hydromatic brake, catheads, p/b Cat 3408 (450 hp) with air clutch and torque converter, Gardner Denver FXN 7-1/2 x 14" duplex mud pump p/b Cat 3408, 98" x 280,000# PJ Services Mfg free standing mast, scopes with kig pin and two axle dolly, can rack 8500" of 4-1/2" drill pipe, 125 kw generator p/b Detroit 671 in steel house with all switchgear and transformer (2nd gen set inoperable and not included), steel house includes parts cabinets, work area and storage.  One piece substructure 8"H x 15"W x 34"L with 4" fold down wings, enclosed parts house and large volume tank, top dog house scopes dow into 400 bbl water tank, heater, lockers, knowledge box, 17-1/2" Brewster rotary table, 4-1/2" square kelly, 3-sheave (6 lines) hook/block grooved for 1-1/8" line, 150 TSM swivel with new wash pipe and packing, Regan 10" annular blowout preventor, Mud system with single cone desander, Mission Magnum mud mixing pump, mud stirring guns (rig uses earthen pits), lower kelly valve, inside BOP.  Kelly hose (new), vibrator hoses (3), 2500" 1-1/8" drill line (new), mouse hole, mouse hole driller, weight indicator, tong torque gage, Bear automatic driller, one-pen drill recorder, Sure Shot deviation instrument, mud gauges, 3 sets pipe racks, type C rotary tongs, lights for derrick, substructure, mud pump, generator house, drill collar slips, 2 sets drill pipe slips, Quincy 325 air compressor with electric motor, slick line wireline unit, mounted on single axle trailer. Stacked since 2010, located USA

Revolve sells parts for Howard Turner rotary tables. We also rebuild all types of rotary tables and are able to offer winter seals that are made of a rubber compound engineered for Canadian winter temperatures.

We manufacture parts for the most common types of top drives and rotary heads used on truck and track mounted drilling rigs. Our replacement quills are engineered and certified and all replacement parts are manufactured to the same or higher specifications as OEM parts. We also offer the service to rebuild top drives completely and can include re-certification to CAODC and OH&S standards.

BADGER 1250(Ref#4418) Similar to Midway - Manufactured 1987 - 2  available - excellent condition, 5 x 6 duplex mud pump, 7.5" fixed rotary table, chain pulldown, rod box, pipe slide, winch, kelly, kelly bushing, handling tools, Mounted on Ford 9000 tandem axle with Detroit 8V92  Price on Request

BADGER 1250(Ref#6983N) Manufactured 1980, Spicer PTO, mounted on 2001 International with N14 Cummins engine, all new hydraulics, Gardner Denver 5x6 mud pump, 667 GD air compressor, 2000 DSM table, mechanical clutches, hydraulic pulldown, 2 rear hydraulic leveling jacks, 200" of new 2 7/8" x 20" drill pipe, all tools  Price:  $165,000

BADGER 1250(Ref#8508R)  Manufactured 1980, Leroi air compressor, Failing 5 x 6 mud pump, foam tank with injection pump, fixed rotary table, fluted kelly, hydrauluic pulldown, mounted on 1979 tandem axle International truck with 290 Cummins engine, 4 leveling jacks, 400" of drill pipe, mud pit, sitting and needs some work  Price:  $80,000

BADGER 1250(Ref#2019N)  Manufactured 1980, 1000 drawworks, Spicer PTO, mounted on 1980 International Paystar 5000 with all wheel drive, with DT466 diesel engine, 13 speed transmission, 35" mast, 5 x 6 Gardner Denver mud pump, LeRoi 50S2 air compressor, 8-1/2" Speedstar stationary rotary table, hydraulic pulldown, mechanical clutches, 2 hydraulic leveling jacks, breakout tongs, tools, 300" of 3-1/2" x 20" flush joint drill pipe, good condition  Price:  $145,000

JOY2500 DRILLING RIG(Ref#14157R)  Double drum drawworks with air clutches, 17-1/2" rotary table, Gardner Denver 5 x 10" duplex mud pump, mounted on 5 axle Mack Cabover chassis, currently being refurbished  Price:  $325,000

WESTERNGEOPHYSICAL EXPLORATION RIG(Ref#12981)  mounted on single axle truck with Ford 350 rebuilt gas engine, PTO, 5 x 6 mud pump, no compressor, 400" 15" drill pipe, 18" bit, Failing tower, 1 collar, 3 hydraulic jacks, 5-1/4" table  Price:  $30,000

WESTERN GEOPHYSICAL 1000(Ref#7240T)  Manufactured 1954, 1200 gear gase, mounted on 2 wheel drive 1964 Ford F600 2-ton truck, 330 V8 gas engine, 5-1/4" stationary table, hydraulic drawworks, 140" of 15" x 2-3/8 Mayhew pipe, 18" kelly, 3-1/4" round kelly drive, pulldown, 3 line machine  Price:  $29,500

SHOPBUILT GEO RIG(Ref#13488)  mounted on Mack Midliner, PTO, 23" fluted kelly, 5 x 6 Gardner Denver mud pump, rebuilt drawworks, clutches and brakes, new pins and bushings, rebuilt table and PTO, 4 stabilizing cylinders w/hydraulic locks, new hydraulic valves, pump lines and tank, 200" of 2-3/8" Mayhew pipe Price on Request

DAVEYM8W DRILL RIG(Ref#2884Na)  Manufactured 1976, mounted on Louisville Ford truck with 54 gas Ford engine, 5 and 4 transmission, new clutch, 38,000# rear, 26-1/2" Kelly bar 4" round, King swivel, 35" tower, 7-1/2" sliding table, 671 Detroit diesel deck engine, 500 cfm/125 psi Davey air compressor rebuilt with less than 2000 hours, water injection system hydraulically operated, 100" of 4" x 20" flush wall drill pipe, can drill to 900", can hold 300" steel PRICE:  $35,000

DAVEY M8 DRILL RIG(Ref#2884Nd)  Manufactured 1975, mounted on tandem axle Ford Louiville truck with 534 gas engine, 5 x 4 transmission, leveling jacks, 38,000# rear, good tires, 671 Detroit diesel engine, 500 cfm/125 psi Davey air compressor, rod box, 7-1/2” fixed table, 32-1/2’ x 4-1/2” Kelly bar, runs 4” drill string, 46’ one piece mast (can be reduced), work platform, holds 300’ drill pipe, 300’ of 4” x 20’ drill pipe, slips, 8-3/4” bit, 5-7/8” sub PRICE:  $35,000

DAVEY MA8R(Ref#11076Tb)  Manufactured 1965, 871 Detroit diesel engine (rebuitl 7-8 years ago), 350 Cummins truck engine, 500/250 air compressor, 20 gpm Bean water injection, mounted on 1966 Mack V83, retractable table, 500" of 3-1/2" drill pipe  Price:  $70,000

DAVEY M8(Ref#12376RB) with 600" of drill pipe (400" brand new) and White flatbed water truck, 1500 gallon tank, also 800cfm portable air compressor  Price:  $55,000

DAVEY M-8(Ref#14212Ra)  Detroit 671 diesel engine on deck, 8" table, 4" kelly, mounted on 1981 Mack with 300 Mack engine, 200" of 3-1/2" drill steel  Price on request

DAVEY M8(Ref#14212Rb)  Detroit 671 diesel engine on deck, 8" table, 4" kelly, monted on 1986 Ford with Cat 3208 engine, 200" of 3-1/2" drill steel  Price on Request

DAVEY M8AR(Ref#1696T)  Manufactured 1974, 500 cfm/100 psi piston air compressor, Detroit 671 deck engine, water injection, retractable 4- speed 8" table, mounted on 1974 White truck with Cummins 350, off road tires 75%, 500" of 4-1/2 x 20" Davey rods, 6" and 8" tools, 30" x 4-1/2" fluted kelly, currently working  Price:  $29,500

DAVEY M8(Ref#2884Npartsrig)  Parts rig, missing swivel and drawworks, air compressor bad, Manufactured 1970, 6-1/4” table, mounted on Ford Louisville truck with gas engine, 100’ steel, sub and bit  Price:  $13,500

DAVEY M8A(Ref#6123RB)  Manufactured 1958, 300/100 air, 4" kelly, rotary drive, Detroit diesel deck engine, mounted on 1969 Chevy tandem axle truck, 400" pipe  Price:  $37,500

DAVEY M8(Ref#671Na)  Davey 500/120 air compressor, Gardner Denver 3-1/2 x 5 air driven mud pump (can be unmounted from rig and used as stand alone unit), 671 Detroit diesel deck engine, Gardner Denver injection pump, 23" kelly bar, 7-1/2 rotary table, mounted on Ford tandem axle truck with gas engine  Price:  $75,000

DAVEY M8A(Ref#9240R)  Manufactured 1969, 8V71 Detroit on deck, 7-1/2" retractable table, rig does not start, mounted on 1969 Chevy C70 tandem axle truck, gas wengine, no mud pump, 490/250 air compressor  Price:  $37,500

DAVEY M8A(Ref#6569T)  mounted on 1964 International 190 truck, 471 Detroit engine, 6 cyl compressor, 28" kelly bar, 34" tower, sliding table, wrenches (hand made), 200" of 4" x 20" drill pipe  Price:$14,500

DAVEY DRILLING RIG(Ref#10682T)  500/125 Davey air compressor, 7-1/2” fixed table, 32-1/2 x 4-1/2” kelly bar, 46’ one piece mast (can be reduced), 671 Detroit deck engine with 5 x 4 transmission, mounted on 1978 Ford 900 tandem axle truck with 534 gas engine, leveling jacks, 38,000# rear, rod box (holds 300’ of pipe), slips, work platform, 200’ of 2-7/8” drill pipe, runs 4” drill pipe  PRICE:  $37,500

EWBANKM-100(Ref#3942Na) Manufactured 1980, 2000" depth capacity, Triple drum, 58" x 70,000# derrick, 18" rotary table, 8V71 Detroit diesel, 4-1/4" x 39" kelly, KG50 King swivel, 4 lines ¾" line, mounted on 3 axle trailer.

EWBANKS 50(Ref#13911Ra)  4 x 5 mud pump, mounted on 1978 International single axle truk, Cat 3208 engine, PTO, 5-1/4" stationary rotary table, no air, square kelly, mud pan, pipe rack, 200" pipe  Price:  $37,500

SEISMIC MODEL 10 DRILLING RIG(Ref#4188T) Rotary table drive, Gardner Denver 5 x 6 FG-41 mud pump, Ingersoll Rand Type 40 air cooled air compressor, munted on 1979 GMC Brigadier J9500 tandem axle truck, 30’ x 9’ x 11’ (10’ with Kelly and lights removed)  Price:  $41,000

REVERSE CIRCULATION ROTARY DRILL RIG(Ref#8095T)  Manufactured 1982, double drum drawworks, 1” main line, 1” laydown line,-1/2” tail out line, depth sounding line.  75’ x 100,000# derrick (new 2010), 6 cylinder Cat deck engine, (spare rebuilt engine in crate), 24” hydraulically driven removable rotary table, 15’ x 12’ x 8’ custom fabricated substrcuture with guard rails, pipe and accessories  Price:  $210,000

CUSTOM BUILT 80,000# ROTARY DRILLING RIG(Ref#8354T)  Built 2017, 65" x 80,000# mast, 3 drum DSM drawworks, Allison transmission for drawworks, 20" Howard Turner rotary table (hydraulically retractable), hydraulic table drive mounted on Cotta transmission (all new hydraulic pumps), mounted on Peterbilt truck with 350 hp Detroit 6V92T, Road Ranger 9 speed gear box, air twin disc clutches  Price:  $775,000

CHICAGOPNEUMATIC RT-2000(Ref#11290)  Manufactured 1979, mounted on Ford 8000 tandem axle truck with Cat 3208 diesel engine, 40" x 60,000# hydraulically raised mast, 10-1/2" rotary table,  5 x 10 Gardner Denver mud pump, drillers and helpers work platform, chain pulldown, kelly and kelly bushing, hydraulic leveling jacks, rod box, hook/block, trailer and  500" of 4-1/2" drill pipe (10" and 20")  Located South Pacific  Price:  $95,000

CHICAGO PNEUMATIC RT-1800(Ref#2272N)  Manufactured 1981, 825/250 GHH air compressor, 50" mast, 35" kelly, 5-1/2 x 8 mud pump, 10" retractable table, air clutches, chain pulldown, breakout tong, 5" x 35" fluted kelly, mounted on Crane Carrier with 400 hp Cummins engine,  PTO, 3 leveling jacks     PRICE:  $155,000

CHICAGO PNEUMATIC RT-1800(Ref#14013R)  Manufactured 1979, combination top head/table drive, 750/250 air compressor, 6 x 9 mud pump, hydraulic rotary table, Detroit 60 (550 hp) engine (recently rebuilt), PTO, mounted on Crane Carrier   Price:  $140,000

CHICAGO PNEUMATIC RT-1800(Ref#15149T)  Manufactured 1978, drawworks recently rebuilt, 10" CP table (rebuit), 5-1/4" x 28 fluted kelly, 50" derrick with racking board (will stand 40" in derrick), mounted on Crane Carrier 400 Cummins engine, PTO (rebuilt), ready to work.  Gardner Denver 5 x 10 mud pump mounted on trailer.  PRICE:  90,000

CHICAGO PNEUMATIC RT-1800(Ref#11586T)  Manufactured 1978, 5-1/2 x 8 mud pump, mounted on Crane Carrier with Cummins 400 engine, PTO, 200" of 3-1/2" pipe, 7" drill collars, 22" retracted table drive

HOWARDTURNER M2000(Ref#14336N)  triple drum drawworks, Gaso 5 x 10 mud pump, 12" Brewster table, 50" derrick, 6 part line, McKissick block, mounted on Kenworth chassis, 4 hydraulic jacks  Currently dismantled

HOWARD TURNER 1500(Ref#5883)  Manufactured 1968, 671 Detroit on deck, 24" kelly, 10" retractable table, 2" swivel, mounted on International single axle truck with gas engine   Price:  $40,000

CAREY(Ref#11065)  Wheatly 6 x 6 mud pump, 2" x 21" kelly, non-retractable rotary table w/4-1/2" opening, mounted on 1996 Forl L8000 truck with dieselengine, PTO, 300" of 14" drill pipe  Price on Request

FOREMOSTMOBILE B57(Ref#6222R) Manufactured 1983, with top drive, set up for mud rotary, PTO, mounted on 1983 International with Cat engine, new rear tires, new main master cylinder, new exhaust, new kelly hose, new pulleys and pulley sheaves, all new cable, 2" diaphragm mud pump, 145/100 piston air compressor, cathead, mud pit, 300" of new Mayhew Jr. drill pipe, new drill collar, new 8" claw bit, working daily, ready to go    PRICE:  $44,500

SHOP BUILT MUD ROTARY DRILLING RIG(Ref#7785T)  Built approx 2007, 150’ – 200’ depth capacity, rig has heavy duty railroad winch cable for up and down drilling operations or for pulling pumps, 3” centrifugal mud pump, IR 40 cfm developmental air compressor, pump and compressor run off Handona gas engines, boom will handle 10’ or 20’ rods, mounted on 1998 Ford 700 2 wheel drive truck, 7 ltr propane engine, (2) tanks (40 and 80 gal), drilling, hydraulics and truck run on propane, 500 gal water tank, pipe rack, compact rig.  Includes approx 120’ of 1-1/4” x 10’ rods, bits for 1-1/4”, 2” and 4” wells,  Price:  $30,000

SHOP BUILT MUD ROTARY RIG(Ref#8355T)  Similar to Failing 1250), 6 x 6 mud pump, mechanical clutches, hydraulic pulldown, 4-1/2" square kelly, 9" stationary table, mounted on Mack truck (Mid 1970"s) with Mack diesel engine, PTO, breakout tongs, pipe rack, 2 rear mechanical jacks, 300" of 3-1/2" x 15" drill pipe  Price:  $54,500

SHOP BUILT ROTARY RIG(Ref#1900N)  mounted on 1988 Ford LN8000 truck with 8.3 Cummins engine, 5 x 6 Gardner Denver mud pump, 5-1/4" retractable table, double drum drawworks, 18" x 3" square kelly, mechanical clutches, hydraulic pulldown, breakout wrench, 400" of 15" x 2-7/8" pipe, stabilizer,

SHOP BUILT COMBINATION RIG(Ref#10457T)  Tophead/rotary, PTO, mounted on 1986 International with DT466 engine, double trans, retractable rotary table, 2 rear hydraulic leveling jacks  Price on Request

SHOP BUILT COMBINATION CABLE/MUD ROTARY RIG(Ref#2458Na)  Isuzu diesel deck engine, mounted on 1998 GMC Topdick with Cat diesel engine, Wheatley 4 x 5 mud pump, LeRoi developmental air compressor, mud mixer, walking beam, stabilizer, hammer, bits, subs, etc., 4 hyd leveling jacks, 200" of 2-3/8" x 10" N rods, some tools   PRICE:  $70,000

SHOP BUILT RIG(Ref#13816)  Built to Speedstar specs, 32" mast, 5 x 6 mud pump, developmental air compressor, mounted on 1971 Ford F600 with new 330 gas engine, 600" of 2-7/8" bottleneck rod, 5-1/4" retract table 3 speeds, 3 speed Ramsey transmission, 12000# winch, has been sitting for several years (but was running when parked)  Price:  $20,000

SHOP BUILT MUD ROTARY RIG(Ref#4668T)  Built 1986, approx 540’ depth, double drum (shop build with triple clutch on each side), Gardner Denver 5 x 8 mud pump, 2” DSM swivel, 8-1/2” retractable table, trailer mounted, 46’ mast mechanically raised, 4” square kelly, 420" of 2-7/8" drill pipe  Price:  $47,500

SHOP BUILT 6000’ DRILLING RIG(Ref#2918Ta)  Trailer mounted, Cat 550 hp engine, 17-1/2” Oilwell rotary table, 7 x 14” mud pump with Cat engine, 4-1/2” kelly

SHOP BUILT ROTARY RIG(Ref#2111T)  Drills to 1500 – 2000", trailer mounted, 16" Brewster stationary table, (1) Waukesha gas engine, (1) diesel engine, some tools Price: $45,000

SHOP BUILT MUD ROTARY RIG  (Similar to Speedstar 1500)(Ref#5150T)  (2) Perkins 1000 Series deck engines freshly reman and not used since, 4 x 3 x 13 centrifugal mud pump, no air, 8-1/2" stationary table, mounted on Volvo with Cat diesel engine, mechanical clutches, 2 mechanical jacks in rear, no kelly, no pulldown, no pipe avaialble  Price:  $100,000

SHOP BUILT MUD ROTARY RIG  (Similar to Speedstar 1500)(Ref#5151T)  (2) Perkins 1000 Series deck engines, 5 x 8 Gardner Denver mud pump, no air, mounted on Kenworth truck with Cat diesel engine, mechanical clutches, no table, no kelly, no pulldown, 2 mechanical jacks in rear, no pipe  Price:  $137,500

SHOP BUILT ROTARY RIG(Ref#9442R) mounted on International with diesel engine, 7" stationary table, 23" Kelly, air clutches, no pulldown, 4x3 centrifugal mud pump with 453 Detroit engine, 2 hydraulic leveling jacks, currently drilling, ready to go

MUD ROTARY RIG(Ref#4964Na)  3 x 4 mud pump, no air, 4 cyl diesel deck engine, 17" kelly, 10" retractable table, pulldown, air clutches, mounted on 1980 Ford Detroit engine, 4 hydraulic jacks, 400" of 3-1/2" x 15" drill pipe, small hydraulic winch, large hydraulic winch  Price:  $30,000

SHOP BUILT MUD ROTARY RIG(Ref#10782Ra)  Built 1995, 3 x 4 mud pump, 7-1/2" table, (2) 527 Chevy gas deck engines, mounted on 1995 Kodiak single axle with 3115 Cat, 600" depth, rod box, 300" of 20" Mayhew pipe  Price:  $57,000