howard turner rotary table supplier

BADGER 1250(Ref#4418) Similar to Midway - Manufactured 1987 - 2  available - excellent condition, 5 x 6 duplex mud pump, 7.5" fixed rotary table, chain pulldown, rod box, pipe slide, winch, kelly, kelly bushing, handling tools, Mounted on Ford 9000 tandem axle with Detroit 8V92  Price on Request

BADGER 1250(Ref#6983N) Manufactured 1980, Spicer PTO, mounted on 2001 International with N14 Cummins engine, all new hydraulics, Gardner Denver 5x6 mud pump, 667 GD air compressor, 2000 DSM table, mechanical clutches, hydraulic pulldown, 2 rear hydraulic leveling jacks, 200" of new 2 7/8" x 20" drill pipe, all tools  Price:  $165,000

BADGER 1250(Ref#8508R)  Manufactured 1980, Leroi air compressor, Failing 5 x 6 mud pump, foam tank with injection pump, fixed rotary table, fluted kelly, hydrauluic pulldown, mounted on 1979 tandem axle International truck with 290 Cummins engine, 4 leveling jacks, 400" of drill pipe, mud pit, sitting and needs some work  Price:  $80,000

BADGER 1250(Ref#2019N)  Manufactured 1980, 1000 drawworks, Spicer PTO, mounted on 1980 International Paystar 5000 with all wheel drive, with DT466 diesel engine, 13 speed transmission, 35" mast, 5 x 6 Gardner Denver mud pump, LeRoi 50S2 air compressor, 8-1/2" Speedstar stationary rotary table, hydraulic pulldown, mechanical clutches, 2 hydraulic leveling jacks, breakout tongs, tools, 300" of 3-1/2" x 20" flush joint drill pipe, good condition  Price:  $145,000

JOY2500 DRILLING RIG(Ref#14157R)  Double drum drawworks with air clutches, 17-1/2" rotary table, Gardner Denver 5 x 10" duplex mud pump, mounted on 5 axle Mack Cabover chassis, currently being refurbished  Price:  $325,000

WESTERNGEOPHYSICAL EXPLORATION RIG(Ref#12981)  mounted on single axle truck with Ford 350 rebuilt gas engine, PTO, 5 x 6 mud pump, no compressor, 400" 15" drill pipe, 18" bit, Failing tower, 1 collar, 3 hydraulic jacks, 5-1/4" table  Price:  $30,000

WESTERN GEOPHYSICAL 1000(Ref#7240T)  Manufactured 1954, 1200 gear gase, mounted on 2 wheel drive 1964 Ford F600 2-ton truck, 330 V8 gas engine, 5-1/4" stationary table, hydraulic drawworks, 140" of 15" x 2-3/8 Mayhew pipe, 18" kelly, 3-1/4" round kelly drive, pulldown, 3 line machine  Price:  $29,500

SHOPBUILT GEO RIG(Ref#13488)  mounted on Mack Midliner, PTO, 23" fluted kelly, 5 x 6 Gardner Denver mud pump, rebuilt drawworks, clutches and brakes, new pins and bushings, rebuilt table and PTO, 4 stabilizing cylinders w/hydraulic locks, new hydraulic valves, pump lines and tank, 200" of 2-3/8" Mayhew pipe Price on Request

DAVEYM8W DRILL RIG(Ref#2884Na)  Manufactured 1976, mounted on Louisville Ford truck with 54 gas Ford engine, 5 and 4 transmission, new clutch, 38,000# rear, 26-1/2" Kelly bar 4" round, King swivel, 35" tower, 7-1/2" sliding table, 671 Detroit diesel deck engine, 500 cfm/125 psi Davey air compressor rebuilt with less than 2000 hours, water injection system hydraulically operated, 100" of 4" x 20" flush wall drill pipe, can drill to 900", can hold 300" steel PRICE:  $35,000

DAVEY M8 DRILL RIG(Ref#2884Nd)  Manufactured 1975, mounted on tandem axle Ford Louiville truck with 534 gas engine, 5 x 4 transmission, leveling jacks, 38,000# rear, good tires, 671 Detroit diesel engine, 500 cfm/125 psi Davey air compressor, rod box, 7-1/2” fixed table, 32-1/2’ x 4-1/2” Kelly bar, runs 4” drill string, 46’ one piece mast (can be reduced), work platform, holds 300’ drill pipe, 300’ of 4” x 20’ drill pipe, slips, 8-3/4” bit, 5-7/8” sub PRICE:  $35,000

DAVEY MA8R(Ref#11076Tb)  Manufactured 1965, 871 Detroit diesel engine (rebuitl 7-8 years ago), 350 Cummins truck engine, 500/250 air compressor, 20 gpm Bean water injection, mounted on 1966 Mack V83, retractable table, 500" of 3-1/2" drill pipe  Price:  $70,000

DAVEY M8(Ref#12376RB) with 600" of drill pipe (400" brand new) and White flatbed water truck, 1500 gallon tank, also 800cfm portable air compressor  Price:  $55,000

DAVEY M-8(Ref#14212Ra)  Detroit 671 diesel engine on deck, 8" table, 4" kelly, mounted on 1981 Mack with 300 Mack engine, 200" of 3-1/2" drill steel  Price on request

DAVEY M8(Ref#14212Rb)  Detroit 671 diesel engine on deck, 8" table, 4" kelly, monted on 1986 Ford with Cat 3208 engine, 200" of 3-1/2" drill steel  Price on Request

DAVEY M8AR(Ref#1696T)  Manufactured 1974, 500 cfm/100 psi piston air compressor, Detroit 671 deck engine, water injection, retractable 4- speed 8" table, mounted on 1974 White truck with Cummins 350, off road tires 75%, 500" of 4-1/2 x 20" Davey rods, 6" and 8" tools, 30" x 4-1/2" fluted kelly, currently working  Price:  $29,500

DAVEY M8(Ref#2884Npartsrig)  Parts rig, missing swivel and drawworks, air compressor bad, Manufactured 1970, 6-1/4” table, mounted on Ford Louisville truck with gas engine, 100’ steel, sub and bit  Price:  $13,500

DAVEY M8A(Ref#6123RB)  Manufactured 1958, 300/100 air, 4" kelly, rotary drive, Detroit diesel deck engine, mounted on 1969 Chevy tandem axle truck, 400" pipe  Price:  $37,500

DAVEY M8(Ref#671Na)  Davey 500/120 air compressor, Gardner Denver 3-1/2 x 5 air driven mud pump (can be unmounted from rig and used as stand alone unit), 671 Detroit diesel deck engine, Gardner Denver injection pump, 23" kelly bar, 7-1/2 rotary table, mounted on Ford tandem axle truck with gas engine  Price:  $75,000

DAVEY M8A(Ref#9240R)  Manufactured 1969, 8V71 Detroit on deck, 7-1/2" retractable table, rig does not start, mounted on 1969 Chevy C70 tandem axle truck, gas wengine, no mud pump, 490/250 air compressor  Price:  $37,500

DAVEY M8A(Ref#6569T)  mounted on 1964 International 190 truck, 471 Detroit engine, 6 cyl compressor, 28" kelly bar, 34" tower, sliding table, wrenches (hand made), 200" of 4" x 20" drill pipe  Price:$14,500

DAVEY DRILLING RIG(Ref#10682T)  500/125 Davey air compressor, 7-1/2” fixed table, 32-1/2 x 4-1/2” kelly bar, 46’ one piece mast (can be reduced), 671 Detroit deck engine with 5 x 4 transmission, mounted on 1978 Ford 900 tandem axle truck with 534 gas engine, leveling jacks, 38,000# rear, rod box (holds 300’ of pipe), slips, work platform, 200’ of 2-7/8” drill pipe, runs 4” drill pipe  PRICE:  $37,500

EWBANKM-100(Ref#3942Na) Manufactured 1980, 2000" depth capacity, Triple drum, 58" x 70,000# derrick, 18" rotary table, 8V71 Detroit diesel, 4-1/4" x 39" kelly, KG50 King swivel, 4 lines ¾" line, mounted on 3 axle trailer.

EWBANKS 50(Ref#13911Ra)  4 x 5 mud pump, mounted on 1978 International single axle truk, Cat 3208 engine, PTO, 5-1/4" stationary rotary table, no air, square kelly, mud pan, pipe rack, 200" pipe  Price:  $37,500

SEISMIC MODEL 10 DRILLING RIG(Ref#4188T) Rotary table drive, Gardner Denver 5 x 6 FG-41 mud pump, Ingersoll Rand Type 40 air cooled air compressor, munted on 1979 GMC Brigadier J9500 tandem axle truck, 30’ x 9’ x 11’ (10’ with Kelly and lights removed)  Price:  $41,000

REVERSE CIRCULATION ROTARY DRILL RIG(Ref#8095T)  Manufactured 1982, double drum drawworks, 1” main line, 1” laydown line,-1/2” tail out line, depth sounding line.  75’ x 100,000# derrick (new 2010), 6 cylinder Cat deck engine, (spare rebuilt engine in crate), 24” hydraulically driven removable rotary table, 15’ x 12’ x 8’ custom fabricated substrcuture with guard rails, pipe and accessories  Price:  $210,000

CUSTOM BUILT 80,000# ROTARY DRILLING RIG(Ref#8354T)  Built 2017, 65" x 80,000# mast, 3 drum DSM drawworks, Allison transmission for drawworks, 20" Howard Turner rotary table (hydraulically retractable), hydraulic table drive mounted on Cotta transmission (all new hydraulic pumps), mounted on Peterbilt truck with 350 hp Detroit 6V92T, Road Ranger 9 speed gear box, air twin disc clutches  Price:  $775,000

CHICAGOPNEUMATIC RT-2000(Ref#11290)  Manufactured 1979, mounted on Ford 8000 tandem axle truck with Cat 3208 diesel engine, 40" x 60,000# hydraulically raised mast, 10-1/2" rotary table,  5 x 10 Gardner Denver mud pump, drillers and helpers work platform, chain pulldown, kelly and kelly bushing, hydraulic leveling jacks, rod box, hook/block, trailer and  500" of 4-1/2" drill pipe (10" and 20")  Located South Pacific  Price:  $95,000

CHICAGO PNEUMATIC RT-1800(Ref#2272N)  Manufactured 1981, 825/250 GHH air compressor, 50" mast, 35" kelly, 5-1/2 x 8 mud pump, 10" retractable table, air clutches, chain pulldown, breakout tong, 5" x 35" fluted kelly, mounted on Crane Carrier with 400 hp Cummins engine,  PTO, 3 leveling jacks     PRICE:  $155,000

CHICAGO PNEUMATIC RT-1800(Ref#14013R)  Manufactured 1979, combination top head/table drive, 750/250 air compressor, 6 x 9 mud pump, hydraulic rotary table, Detroit 60 (550 hp) engine (recently rebuilt), PTO, mounted on Crane Carrier   Price:  $140,000

CHICAGO PNEUMATIC RT-1800(Ref#15149T)  Manufactured 1978, drawworks recently rebuilt, 10" CP table (rebuit), 5-1/4" x 28 fluted kelly, 50" derrick with racking board (will stand 40" in derrick), mounted on Crane Carrier 400 Cummins engine, PTO (rebuilt), ready to work.  Gardner Denver 5 x 10 mud pump mounted on trailer.  PRICE:  90,000

CHICAGO PNEUMATIC RT-1800(Ref#11586T)  Manufactured 1978, 5-1/2 x 8 mud pump, mounted on Crane Carrier with Cummins 400 engine, PTO, 200" of 3-1/2" pipe, 7" drill collars, 22" retracted table drive

HOWARDTURNER M2000(Ref#14336N)  triple drum drawworks, Gaso 5 x 10 mud pump, 12" Brewster table, 50" derrick, 6 part line, McKissick block, mounted on Kenworth chassis, 4 hydraulic jacks  Currently dismantled

HOWARD TURNER 1500(Ref#5883)  Manufactured 1968, 671 Detroit on deck, 24" kelly, 10" retractable table, 2" swivel, mounted on International single axle truck with gas engine   Price:  $40,000

CAREY(Ref#11065)  Wheatly 6 x 6 mud pump, 2" x 21" kelly, non-retractable rotary table w/4-1/2" opening, mounted on 1996 Forl L8000 truck with dieselengine, PTO, 300" of 14" drill pipe  Price on Request

FOREMOSTMOBILE B57(Ref#6222R) Manufactured 1983, with top drive, set up for mud rotary, PTO, mounted on 1983 International with Cat engine, new rear tires, new main master cylinder, new exhaust, new kelly hose, new pulleys and pulley sheaves, all new cable, 2" diaphragm mud pump, 145/100 piston air compressor, cathead, mud pit, 300" of new Mayhew Jr. drill pipe, new drill collar, new 8" claw bit, working daily, ready to go    PRICE:  $44,500

SHOP BUILT MUD ROTARY DRILLING RIG(Ref#7785T)  Built approx 2007, 150’ – 200’ depth capacity, rig has heavy duty railroad winch cable for up and down drilling operations or for pulling pumps, 3” centrifugal mud pump, IR 40 cfm developmental air compressor, pump and compressor run off Handona gas engines, boom will handle 10’ or 20’ rods, mounted on 1998 Ford 700 2 wheel drive truck, 7 ltr propane engine, (2) tanks (40 and 80 gal), drilling, hydraulics and truck run on propane, 500 gal water tank, pipe rack, compact rig.  Includes approx 120’ of 1-1/4” x 10’ rods, bits for 1-1/4”, 2” and 4” wells,  Price:  $30,000

SHOP BUILT MUD ROTARY RIG(Ref#8355T)  Similar to Failing 1250), 6 x 6 mud pump, mechanical clutches, hydraulic pulldown, 4-1/2" square kelly, 9" stationary table, mounted on Mack truck (Mid 1970"s) with Mack diesel engine, PTO, breakout tongs, pipe rack, 2 rear mechanical jacks, 300" of 3-1/2" x 15" drill pipe  Price:  $54,500

SHOP BUILT ROTARY RIG(Ref#1900N)  mounted on 1988 Ford LN8000 truck with 8.3 Cummins engine, 5 x 6 Gardner Denver mud pump, 5-1/4" retractable table, double drum drawworks, 18" x 3" square kelly, mechanical clutches, hydraulic pulldown, breakout wrench, 400" of 15" x 2-7/8" pipe, stabilizer,

SHOP BUILT COMBINATION RIG(Ref#10457T)  Tophead/rotary, PTO, mounted on 1986 International with DT466 engine, double trans, retractable rotary table, 2 rear hydraulic leveling jacks  Price on Request

SHOP BUILT COMBINATION CABLE/MUD ROTARY RIG(Ref#2458Na)  Isuzu diesel deck engine, mounted on 1998 GMC Topdick with Cat diesel engine, Wheatley 4 x 5 mud pump, LeRoi developmental air compressor, mud mixer, walking beam, stabilizer, hammer, bits, subs, etc., 4 hyd leveling jacks, 200" of 2-3/8" x 10" N rods, some tools   PRICE:  $70,000

SHOP BUILT RIG(Ref#13816)  Built to Speedstar specs, 32" mast, 5 x 6 mud pump, developmental air compressor, mounted on 1971 Ford F600 with new 330 gas engine, 600" of 2-7/8" bottleneck rod, 5-1/4" retract table 3 speeds, 3 speed Ramsey transmission, 12000# winch, has been sitting for several years (but was running when parked)  Price:  $20,000

SHOP BUILT MUD ROTARY RIG(Ref#4668T)  Built 1986, approx 540’ depth, double drum (shop build with triple clutch on each side), Gardner Denver 5 x 8 mud pump, 2” DSM swivel, 8-1/2” retractable table, trailer mounted, 46’ mast mechanically raised, 4” square kelly, 420" of 2-7/8" drill pipe  Price:  $47,500

SHOP BUILT 6000’ DRILLING RIG(Ref#2918Ta)  Trailer mounted, Cat 550 hp engine, 17-1/2” Oilwell rotary table, 7 x 14” mud pump with Cat engine, 4-1/2” kelly

SHOP BUILT ROTARY RIG(Ref#2111T)  Drills to 1500 – 2000", trailer mounted, 16" Brewster stationary table, (1) Waukesha gas engine, (1) diesel engine, some tools Price: $45,000

SHOP BUILT MUD ROTARY RIG  (Similar to Speedstar 1500)(Ref#5150T)  (2) Perkins 1000 Series deck engines freshly reman and not used since, 4 x 3 x 13 centrifugal mud pump, no air, 8-1/2" stationary table, mounted on Volvo with Cat diesel engine, mechanical clutches, 2 mechanical jacks in rear, no kelly, no pulldown, no pipe avaialble  Price:  $100,000

SHOP BUILT MUD ROTARY RIG  (Similar to Speedstar 1500)(Ref#5151T)  (2) Perkins 1000 Series deck engines, 5 x 8 Gardner Denver mud pump, no air, mounted on Kenworth truck with Cat diesel engine, mechanical clutches, no table, no kelly, no pulldown, 2 mechanical jacks in rear, no pipe  Price:  $137,500

SHOP BUILT ROTARY RIG(Ref#9442R) mounted on International with diesel engine, 7" stationary table, 23" Kelly, air clutches, no pulldown, 4x3 centrifugal mud pump with 453 Detroit engine, 2 hydraulic leveling jacks, currently drilling, ready to go

MUD ROTARY RIG(Ref#4964Na)  3 x 4 mud pump, no air, 4 cyl diesel deck engine, 17" kelly, 10" retractable table, pulldown, air clutches, mounted on 1980 Ford Detroit engine, 4 hydraulic jacks, 400" of 3-1/2" x 15" drill pipe, small hydraulic winch, large hydraulic winch  Price:  $30,000

SHOP BUILT MUD ROTARY RIG(Ref#10782Ra)  Built 1995, 3 x 4 mud pump, 7-1/2" table, (2) 527 Chevy gas deck engines, mounted on 1995 Kodiak single axle with 3115 Cat, 600" depth, rod box, 300" of 20" Mayhew pipe  Price:  $57,000

Revolve sells parts for Howard Turner rotary tables. We also rebuild all types of rotary tables and are able to offer winter seals that are made of a rubber compound engineered for Canadian winter temperatures.

We manufacture parts for the most common types of top drives and rotary heads used on truck and track mounted drilling rigs. Our replacement quills are engineered and certified and all replacement parts are manufactured to the same or higher specifications as OEM parts. We also offer the service to rebuild top drives completely and can include re-certification to CAODC and OH&S standards.