gas oven safety valve troubleshooting pricelist

Frigidaire gas range oven safety valve. 3/8" inlet with 3/16" and 1/4" terminals. One of each size. 3203459, Y30128-35AF, 814412 ... More Info

Frigidaire gas range dual safety valve. 3/8" tubing inlet and lower outlet. Orifice hood upper outlet. The 5303208499 gas valve has the following numbers on the side: 0549A311962TNAT NC-4109-5 774111600012 Y-30172-2 ... It was made by Invens ... More Info

Whirlpool / Maytag oven safety valve. Low voltage oven valve for flat Norton ignitors. 3.0 - 3.3 volts. 3.3 - 3.6 amps. Adjustable orifice. Female terminals 3/8" tubing. ... More Info

Whirlpool / Maytag oven safety valve. Low voltage oven valve for flat Norton ignitors. 3.0 - 3.3 volts. 3.3 - 3.6 amps. Adjustable orifice. Female terminals 1/2" tubing. ... More Info

Exact Replacement Parts for Frigidaire gas range oven safety valve 3203459. 3/8" inlet with 3/16" and 1/4" terminals. One of each size. 3203459, Y30128-35AF, 814412 ... More Info

GE gas range oven safety valve for round ignitors. 3.3 - 4.0 volts. 2.5 - 3.0 amps. Valve has male wire terminals. Reference number 164D2574G001 and 30100-17. ... More Info

GE gas range oven safety valve. This is a dual valve. 1/4" male terminals on top. 3/16" male terminals on bottom. Reference numbers 223C3389G001 and Y30148-14. ... More Info

If you"re in need of a repair job, you can expect to pay between $100 and $600 depending on the type of unit you have. The price varies widely, particularly depending on whether you have an electric or a gas based appliance. Some units are inexpensive to fix, while others suffer from different faults and problems. For example, a gas oven could have a leak, while an electric one may have wiring issues. The table below shows common types and average cost to fix each.

Electric oven repairs are priced between $100 and $200. These are very popular because of their ease of use and relative safety when compared to gas alternatives. They also tend to be the cheapest to fix and maintain, offering a cost-effective option for those who want to keep their repair bills to a minimum. Troubleshooting with a service person may allow you to easily and simply fix the issue, but if the fix isn’t simple, it is a good idea to rely on the help of a service person.

Gas oven repairs range from $100 to $600. Gas appliances are often more expensive to fix than electric models, and there are more risks associated with them due to the dangers of gas leaks and fires. So, it is strongly recommended to call a professional and not attempt to do the work on your own. It is good to at least try to fix the appliance first because it may be something as simple as a bad sensor or faulty ignitor.

Pizza oven repairs are priced between $150 and $600. They are designed primarily to cook pizzas, offering a crispy crust and evenly-cooked pie. They vary in size and complexity, with gas models, electric models, and even wood-fueled models, which means that repairs vary. They are designed to last between 10 and 25 years, so if it has been less than this amount of time, it is a good idea to troubleshoot and fix the problem.

Steam oven repair costs range from $200 to $600. They are among the most expensive types to buy and can be quite costly to fix. These are growing in popularity due to their health and efficiency advantages. Using steam to cook meats and veggies retains moisture and tenderness in your ingredients. If your steam appliance is not working properly, the chances are that there is a problem with the water tank or the water line that needs to be fixed to get it working again.

If a professional determines that a repair is needed, you may spend $100 to $300 to fix the problem. Ovens suffer from a range of faults and failures and have various components that may need repairing due to damage or general wear and tear. The price of repairs is affected by the type of work that needs to be done. The table below shows common repairing jobs and average costs for each.

The average cost of oven fan repair is $100 to $200, which is important because the fan circulates hot air to maintain hot temperatures for cooking food. Also, an efficient oven fan means you can cook food at lower temperatures in modern conventional ovens. A faulty motor may stop the oven fan from spinning. If the fan is making a lot of noise and not circulating heat properly, this is another sign repairs are needed. Often, this problem is caused by worn bearings, so the fan motor needs to be repaired or replaced.

Thermostat repairs are priced between $100 and $200. The thermostat regulates the temperature, and if your oven it is not heating properly, it may be because of the thermostat. Sometimes, you may find that the thermostat may not need to be replaced but simply needs an adjustment to get it working again. Locating the temperature sensor and adjusting it according to the instruction manual may solve the thermostat problem before calling a repair person.

Door repairs range from $100 to $250, depending on the door type and size and the nature of the job. Sometimes, doors have hinge or lock issues that prevent them from closing or opening smoothly. Other issues could be with springs or broken latches that need to be replaced. Trying to run an oven without a properly closed door can be very dangerous and inefficient. To fix a door, a handyman may need to alter its position, clean the hinges, or add a new locking mechanism.

Paint repairs or touch-ups are priced between $100 and $250. Over time, the paint can crack, peel, or fade away, leaving the appliance looking old. This impacts the overall aesthetic of your kitchen. You shouldn’t have to replace an entire appliance due to minor decor issues. A professional needs to use a special heat-resistant paint to freshen up the oven’s look, and they usually need to clean and sand parts of it as well.

Most oven glass repairs cost between $100 and $300. This problem should be treated with priority to ensure you can safely use the oven. Glass damage may be caused by something hard hitting the glass or pushing the oven rack in with the door. These things cause weakness and failure in a glass oven door over time, and then the shattered glass needs to be removed and replaced with a fresh piece of glass.

Igniter repairs are priced from $150 to $250 on average. These components are only found in gas units and ignite the gas to provide heat. Having a faulty igniter won’t only keep your appliance from working properly but can also be hazardous, causing gas leaks. Igniters sometimes stop working if they become dirty from grease and food particles, so they need to be carefully cleaned. You may have an igniter problem if you open your broiler door while the oven is on, and the glow bar is not getting voltage.

If you need to repair an oven heating element, expect to pay between $150 and $400. The heating element is key to electric ovens as it generates heat for broiling and baking. Electric current passes through the element and warms the oven. If this part is damaged or worn, it can cause issues such as sparking or dirty ovens. Other signs that you may need heating element repair is if the element does not glow bright orange when the oven is on or if your food is not cooking all the way through.

If a part of your oven needs to be replaced, expect to pay between $100 and $600. In some cases, repairs may not be possible for individual components, or it might just be simpler or cheaper to have the parts replaced entirely, rather than trying to fix the old ones. The price of replacing parts varies based on the type of part, and there are many different components to modern appliances. The table below shows common parts and their average replacement costs.

Door switch replacements is priced between $100 and $200. The door switch plays a key role in and ovens functioning. It detects whether the door is closed and may also control the light. If the switch is broken, it might not detect when the door is closed, preventing the whole thing from working properly. To replace a switch, a repairman usually has to unscrew the top panel to access the old switch and install the new one.

Gas valve repairs range from $100 to $200. The gas valve, also known as the safety valve, is the part responsible for controlling the release of gas. It keeps you safe by only allowing gas to pass through when the igniter has reached the correct temperature for ignition. Therefore, a broken valve can be very dangerous and lead to life-threatening situations. The back panel usually needs to be removed to access this valve.

Temperature sensor replacements are priced between $100 and $250 each. The temperature sensor plays a big part in the functioning of ovens, detecting the temperature and informing the control board of this data. A faulty sensor can lead to issues with temperature and heating processes, causing it to run too hot or too cold. The back panel needs to be removed to access the sensor.

Gasket replacements cost between $100 and $250 each. The gasket, or door gasket, of your appliance is used to seal the door to prevent heat loss. If your appliance is cooking unevenly or is losing heat through the door, the gasket might be cracked or damaged and needs replacing. Gaskets usually need to be unclipped or unscrewed, the channels in the door need to be cleaned, and then the new one needs to be screwed in.

If you need your fan replaced, it will cost between $100 and $275. Some units have fans located on the back inside panel that heat it up faster by spreading warm air around faster than traditional ovens which use still air. If the fan stops working, the unit can overheat and break down completely. To replace the fan, a professional needs to unscrew some sections to access the fan area, detach the existing fan, and fit the new one in place.

If your door glass is damaged, expect to pay between $100 and $300 to replace it. Although the glass on most ovens is tempered, which means it is a stronger type of glass, it can still crack or shatter. Cracks within the glass can make it difficult or nearly impossible to cook food at a steady temperature; therefore, the door should be replaced. The door first needs to be taken off, and the inner panel needs to be unscrewed to access the glass panel.

Heating element replacement pricing ranges from $150 to $400, depending on the type of appliance and the element needed. Also known as an oven coil, the heating element should glow bright orange if it is working properly. However, if it is broken, the element won’t glow properly, nor will your oven heat up. In fact, using a defective heating element may cause a spark that could blow fuses or cause other hazards. To replace it, a handyman will remove the screws around the current element, remove it and insert the new element, attach the wires correctly, and secure it in place. Keep in mind the oven coil replacement cost increases if your handyman says both elements on the top and the bottom of the appliance need to be replaced.

Fixing problems usually end up costing between $100 and $600. You might not know exactly which part needs fixing. Instead, you may simply notice that the unit takes a long time to reach the desired temperature, the door becomes stuck, or the fan stops spinning like it used to. If you suspect your oven has an issue, call a professional to diagnose the problem. The table below shows common problems and the average repair costs associated with them.

If your oven makes a lot of noise, expect to pay between $100 and $275 to have it fixed. The most common cause of excess noise is the fan or fan motor. One of the fan blades may be warped, the fan might need to be replaced, or the motor could be dying and causing issues with the fan’s functionality. Your appliance may also make noise because the timer is broken, or a panel may have loosened.

Repairing a slow-heating oven ranges from $100 to $600. There are a few possible problems to consider when a unit is slow to heat. It might be because the temperature sensor or thermostat is not working correctly, or it could be an issue with the heating element or even the control board. Since this symptom has many causes, the price of repairs varies, depending on the nature of the fault.

If the fan in your convection oven stops working, expect to pay between $100 and $600 to have it repaired. The price of repair for this issue can be low or expensive, depending on what’s wrong. For instance, replacing a fan won’t be as costly as replacing a control board that is causing the fan not to operate properly. You will know that the problem with your appliance is with the convection if it is taking longer than usual to heat up or you hear strange sounds with the fan.

Fixing self-cleaning ovens is priced between $100 and $600. Many modern options come with self-cleaning features, saving you time and effort, but these features are subject to mishaps. If your appliance stops self cleaning, it could be a fault with the control board, which may be expensive to fix or replace. However, it could be something simpler like a door switch issue.

Gas ovens that keep clicking can be repaired for around $200 to $350 on average. This issue is usually caused by a problem with the igniter because igniters make a clicking sound when sparking. This clicking sound can be caused by something as simple as a build up of food or moisture in the igniter or as severe as a damaged spark electrode. If the igniter is repeatedly clicking, it has some kind of fault and needs to be repaired or replaced by a professional.

Fixing an oven requires assistance from an appliance repair company. Professionals know the safety requirements for working on appliances. This is especially important with gas stoves.The Department of Homeland Security recommends turning the gas off in the home when an appliance is not working correctly. Natural gas should only be turned back on by a professional. Appliance repair shops are usually located around residential neighborhoods.

The price to fix an oven ranges from $150 to $400. If you want a new one, you are looking at paying between $600 to $1,600 if you are installing the same type (electric or gas) and $750 to $2,700 if you are installing a different type. Estimating the cost of repairs helps determine if you should fix or replace the appliance. If the total for labor and parts is more than half the retail cost of the appliance, then consider a replacement. If it has broken down repeatedly in the last year and you have paid for multiple service calls, this is a red flag and indicates the need for a newer model.

Additional Considerations and CostsLicense. Check for any permits or licenses needed for repairs and installations. If electrical work or gas piping is needed, the job may require a permit.

Certified technicians. Choose a certified technician whenever possible. Certification confirms that the technician has completed the appropriate training to work on ovens. Organizations like the International Society of Certified Electronics Technicians (ISCET) offer certifications for appliance repair.

Home warranty. Oven repairs might be covered by your home warranty, so make sure you check your contract. Instead of paying the price of the repair or replacement, you may need to pay a minimal service charge for the service, which usually averages $100.

Consider a new one. These appliances have an average lifespan of 10 to 15 years. For complex repairs, it may make more financial sense to replace older models. Additionally, it may be difficult to find replacement parts for antique and pre-2000 ovens.

Fixing an appliance is worth it if you can get a few more years out of it, and the price of fixing it is less than replacing it with a new one.Is it cheaper to fix an oven or buy a new one?

It may be cheaper to fix it depending on a couple of factors: the age of the appliance and the part that needs to be fixed. If yours is older than 15 years and the part that needs to be fixed is very costly, it may be best to get a new one.Can an electric oven be repaired?

Electric ovens can be repaired in many cases. Most often, they simply need a single replacement part to become operational again.What is the lifespan of an oven?

Fixing it can be as simple as replacing the door or as complex as replacing the control board. Hire a professional for all repairs due to safety risks.

Thank you for your inquiry. The oven safety valve is one part that may fix the issue, but there are some other parts that you will need to check to see which one is causing the issue. You will need to check the igniter, the electronic control board and the temperature sensor. I hope this helps. Thank you and have a great day!

Can this oven valve work on my range? The range was plugged into the wrong outlet and it shorted out, the igniter glows when the stove is turned on however the burner isn"t lighting. I was told the the valve needs to be replaced.

Thank you for your question. This is not the correct safety valve for your appliance. I have listed the correct valve below for you. I hope that helps. Good luck with your repair.

Oven doesn"t heat. Igniter glows when gas is turned on, voltage on value starts near zero and slowly ramps up to just under 3 volts, but gas never ignites. The slow ramp seems normal to allow igniter to get hot, but not sure what the valve"s voltage should be to have it open. Valve coil is not open per ohm meter. Sounds like a bad valve? Thanks.

Hello Curt, Thank you for your inquiry. It sounds like it could be either this part or the pressure regulator. When the ignitor heats up to a certain temperature, it is supposed to trigger the valve to open and let the gas in to ignite and the regulator cuts it off at a certain pressure. Hope this helps!

Hello Sal, thank you for your question. You can test the gas valve to see if it has gone bad. You will need to test this with a multimeter. Here is a video that will show you how to test that valve.

Hello Steve, thank you for your question. The oven safety valve part number WB19K31 will work with either NAT or LP gas. The part itself can be switched over without any additional parts. Please check your owners manual on steps to change that over. I hope this helps!

In the oven a wire from the igniter shorted (had to pry the wire off the wall) to the frame. Would the control valve or the thermostat also be damaged. Where is the thermostat located on the stove. I noticed that the plastic on one of the knife connection on the control valve was missing

Hello Robert, thank you for writing. It is doubtful that the Oven Safety Valve or Oven Thermostat were also damaged when this occurred. The Oven Thermostat (part PS235170 on your model) is located behind the Manifold Panel (control panel). We hope this helps.

Hi there, i have a GE gas range (model jgbp28sem1ss) and need to replace the safety valve for the part of the oven that bakes. Is this the correct part? Thanks

Also some folks think that because when they tap on the dual thermal valve, it works so they think it must be the valve. Most of the time it is not - tapping on the valve gets more air and amps to the ignitors, but the ignitors are what is bad.

Note that we are currently reevaluating all of our guides to ranges and our advice on buying them, including learning everything we can about induction stoves and cooktops. This is largely due to changing city and state regulations (video) on installing gas kitchen equipment and to the 2022 Inflation Reduction Act, which introduced the first federal consumer rebates on electric kitchen appliances. However, if you need to buy a new gas stove now, the picks below are all available. And they’re made by companies we trust, so we remain confident in recommending them.

The cooktop on the GE JGB735 is about as good as you’ll get for the price. It has a stronger pair of power burners than you usually find, and both are situated in the front row (where they’re easy to reach) and covered with continuous grates. The oven is big enough to comfortably fit a hefty, 26-pound turkey or a spacious, 15-by-20-inch baking stone. The JGB735 also has a high-heat cleaning mode as well as a convection mode—for quicker, crispier, evenly done cooking—and an air-fry setting. The previous version of this range, the JGB720, received largely positive reviews and seemed generally reliable, so we’re optimistic about the current model. We do wish the oven came with a third rack.

The Frigidaire Gallery GCRG3060A has a build quality that feels almost as sturdy as that of the GE JGB735. Plus, the Gallery has a third oven rack. Like the GE JGB735, the Frigidaire Gallery has an air-fry setting and a number pad (so you can more easily control the oven). We don’t think the Gallery’s cooktop is as versatile, since its second-strongest burner isn’t all that strong, and it sits in the back row (though some may prefer this layout, to keep hot pots away from kids, for instance). But the Gallery is a good alternative to the GE JGB735, if that model is sold out.

If you just need an inexpensive stove that works, the Whirlpool WFG320M0B offers the best balance of features for a low price. It has one of the better cooktops in this price range, with a stronger power burner than those on most competitors and continuous cast-iron grates (especially uncommon at this price). The oven has a similar capacity to what you get in a pricier stove. But it doesn’t have convection, self-cleaning, or a number pad for control (the lack of these are typical with budget stoves). We found it to be well built, and it has a strong average user rating.

This double-oven range has one of the largest lower ovens we’ve seen in this quirky product category, and it has one of the strongest power burners we’ve seen on any freestanding range.

If you’re looking for a double-oven range (read more about them here), we suggest the GE Profile PGB965. It has best-in-class cooking features, including an air-fry setting and a cooktop that’s as powerful as any we’ve seen on other freestanding ranges. And its lower oven fits bigger birds and roasts than other two-oven models can accommodate.

You can check if the shut-off valve if you are able to slide the range out from the cabinet. If you are unable to slide the range out, we recommend consultation with a local certified technician.

Verify the main gas shut-off valve is in the open position. Most service valves are single-lever ball valves; the handle parallel to the line means gas is flowing, perpendicular means it"s cut off. (See Illustration below)

NOTE: If the range is hard piped you will not be able to slide it out from the cabinet, if it connected with a flexible supply line take care not to over-extend the supply line. The main gas valve will usually be at the end of a fixed pipe and connect to the pressure regulator with a flexible supply line. Take care not to kink or pinch this flexible pipe.

If your gas range is not working correctly, you should check the gas pressure regulator shut-off valve. The factory default setting for the gas pressure regulator is in the "ON" position but may have been turned to the "OFF" position during handling or transportation. When the shut-off valve is on the "OFF" position, gas will flow to the cooktop burners but will not provide a gas supply to the oven.

You can check if the shut-off valve if you can slide the range out from the cabinet. If you are unable to slide the range out, we recommend consultation with a local certified technician.

Verify the pressure regulator shut-off valve is in the open position. The pressure regulator is located at the back of the range. Make sure that the shut-off valve lever is in the "On" position (see illustration below).

NOTE: If the range is hard piped, you will not be able to slide it out from the cabinet if it connected with a flexible supply line, take care not to over-extend the supply line. The main gas valve will usually be at the end of a fixed pipe and connect to the pressure regulator with a flexible supply line. Take care not to kink or pinch this flexible pipe.