wire rope lubricant specification quotation

Castrol Molub-Alloy 902 SF Wire Rope Lubricant may be applied manually. However, application by automatic spray equipment is recommended. For best coverage and penetration, wire rope should be sprayed on all sides, which requires a minimum of two nozzles opposing each other.

Castrol Molub-Alloy 902 SF Wire Rope Lubricant is intended to provide safe operation through longer service life of wire ropes while reducing total lubrication and maintenance costs. The naturally flexible and adhesive film provides the required persistence to assure also protection of sheaves and drums without excessive application.

This product is a semi-fluid wire rope lubricant designed to meet the lubrication and corrosion prevention requirements of wire ropes working under all conditions. Typical application areas are dockside and ship crane ropes, drag lines, hoists and mobile cranes.

Wire Rope Lube will penetrate between the rope strands to provide integral lubrication and to provide both internal and external protection against corrosion caused by wet, adverse weather conditions and sea water.

Rope Services Direct recommend using lubrication. For instance the Tygris Chain and wire rope lubricant. Therefore you should use it with all of our wire ropes. Because it ensures longevity. Also notably the lubricant comes under the bracket of Industrial Maintenance Aerosols. In addition the wire rope lubricants specification follows for your convenience.

This is a heavy duty, molybdenum disulphide reinforced lubricant. It penetrates deeply into drive chains and also wire ropes to give long lasting lubrication. Not to mention preventing corrosion, wear and chain elongation. It gives outstanding performance under extreme load and is also resistant to fling off.

Contents: Blend of mineral oils, molybdenum disulphide, bitumen, xylene, white spirit. Extreme pressure and dewateringadditives,solventandhydrocarbon propellants. No silicones.

See below for the complete specification on this product. Including hazard identification, composition and first aid. Not to mention exposure control, regulatory information and more.

We provide your company with the highest level of innovation, safety, and support for the care, and maintenance of your Wire Ropes. This generates longevity for your Wire Rope that no manual method used can achieve.

Since 1982, when we first introduced our products to the world market, we have consistently created the most advanced, safe, and well-supported method for Wire Rope Preventative Maintenance. Over the years since, our continued leadership has proven to make our Customers’ job much easier and cost effective on the broadest possible scale. In honor of this three-decade tradition, we will continue to announce further innovations, with several Patent Pending design features on the horizon. We never stop looking for improved design opportunities based on our own as well as our Customers’ first hand field experience.

Kirkpatrick Wire Rope Lubrication System’s integrated design provides the most efficient way to field dress any configuration of Wire Rope in any Preventative Maintenance Schedule. Our Lubrication Systems accomplish this by scraping a Wire Rope’s Groove Pattern and outer circumference clean of debris while simultaneously applying a new coat of Wire Rope Lubricant under pressure to the surface and into the internal strands. This process is all accomplished in one pass, generating tremendous savings in time, labor costs, and Wire Rope Lubricant usage. Scraper Plates and Groove Cleaners used with the Kirkpatrick System are calibrated to fit the specific Diameter and match the number of outer strands and lay pattern of the Wire Rope for which they are used. An accurate fit to the Groove Pattern efficiently removes product build-up and debris within each distinct Groove Pattern. Our revolutionary proprietary laser created tooling makes the finished Groove Cleaners as close to a perfect fit as is possible.

Consequently, Dynagard™ Environmental Wire Rope Lubricants are uniformly applied to the newly cleaned surface, penetrating into any open spaces within the Grooves and inner strands that allow them to do so. The goal in this process is to maintain the structural integrity of the original factory applied lay-up material for as long as possible. Therefore, using a lubricant coating product such as Dynagard™ that marries well to the initial lay-up material substantially increases the working life of the layup material as well as the Wire Rope. Superior Wire Rope Maintenance happens because of the aforementioned and as the Wire Rope passes through a 100% pressurized immersion within the Lubrication Collar’s Seal Center Chamber. Surface and internal moisture (trapped within the strands) is displaced as the pressurized Wire Rope Lubricant coating is being applied. Our Wire Rope Lubrication Systems are functional with both low and high viscosity coatings.

Manufacturer of chain, wire rope & cable grease. Available as coating grease. Features include soft, semifluid formulation & water-resistant. Coating grease contains a wear-reducing additive that protects against premature wear & shields metal against corrosive attack. Available in three NLGI grades in red/gold colors. Services include equipment reliability assessment, oil analysis, lubricant storage, handling & transfer, contamination exclusion, contamination removal, education & training & design, implementation & support.

Manufacturer and distributor of grease for chain, cable and wire rope applications. Products include conventional grease, aerosol grease, food grade aerosol grease, liquid aerosol grease, food grade white grease, biodegradable grease, bearing grease, heavy duty multipurpose grease and heavy duty aluminum complex multipurpose grease. Grease for use in asphalt plant, bottling/canning, construction, fleet maintenance, marine transport, paper/lumber mill, plastics manufacturing, power generation and printing applications are available. JIT delivery available.

Manufacturer of wire rope and cable grease. Types include biodegradable and marine and automotive grease. Resistant to fresh and salt water. Services include designing, product development, plant surveys and lubricant inventory consolidation, lubrication maintenance, oil or fluid and grease analysis and training. Markets served include food, beverage and pharmaceutical. NSF/H-1 registered.

Manufacturer of synthetic multi-purpose PTFE ( lubricants & grease, low temperature torque, high temperature performance. Magnalube-G protective & lubricating film on metal parts, water resistant specialty lubricant for industrial engineers. Magnalube GX with molybdenum disulfide for extreme pressure environments. All product applications include machining, construction, gears, bearings, hydraulics & pneumatic mechanical functions.

Manufacturer of biobased professional-grade greases and lubricants. Products reduce friction, heat and wear. Contain no VOCs and mix with petroleum-based greases. Non-flammable with high flash points. Non-toxic, biodegradable formulations recommended for environmentally sensitive areas near waterways. For use on chains, slides, rollers, hinges, pivot points, gears, cables, metal-to-metal contact areas, oil lubricated bearings. For industries including industrial, hardware, marine, automotive and agricultural markets, as well as many industries requiring professional-grade greases.

Manufacturer of wire rope and cable grease. Nuclear grade bearing, silicone brake and silicone dielectric greases are available. Used in cable connections, battery and parking break cables applications. Available in tubes, cartridges, pails, cans and drums. RoHS and REACH compliant. NSF, USDA, and FDA certified.

Distributor of cable & wire rope grease. Product range includes telecom tools, batteries, digging/trenching tools, drill bits, electrical connectors, cord & terminals, fasteners/anchors, powertools, screwdrivers/nutdrivers & tool kits for telecom & cable companies.

Design & manufacture of a high efficiency grease that outperforms the others. Each Accrolube® specialty lubricant is designed for specific applications. Can also custom formulate a lubricant to fit particular need.

Distributor of rope grease including rust preventive products. Contains three performance rust preventives covering a range of applications including storage and inter-operational activities. Intended for protection cold-rolled sheet and coiled steel in the metal industry. Available in weight of 40.00 lbs., rope grease can be used as protective coatings for cold-rolled sheet and coiled steel, coatings for precision machined parts and instruments for storage and die lubricant in light duty pressing operations.

Manufacturer of wire rope & cable lubricants including grease. Specifications of wire rope & cable grease include pour point of minus 25 degrees F, flash point of 120 degrees F, viscosity of 3.28 at 100 degrees F & 12.8 at 40 degrees F, & specific gravity of 0.89. Wire rope & cable grease capacities include ability to penetrate wire rope, evaporate & leave a film of molybdenum disulphide in the core to lubricate each wire strand. Wire rope & cable grease can be applied by spraying, brushing or dipping in a in-line tank with no heating requirements. Grease is available in 25 lb. pail or 55 gal. drums. Compliant with ASTM standards.

Broadline distributor of electronic components, including heat sink products: aluminum heat sinks, cable & wire grease, wire rope & cable grease, fiber optics heat sinks, & printed circuit board heat sinks.

Distributor of gear, wire rope and cable greases for marine industry. Other products include oils, lubricants, fluids, inhibitors, and coolants. Also offers turnkey lubricant services.

Manufacturer of cable and wire rope grease. Suitable for lubricating wire ropes, cables, flexible couplings, chains, open gears, and partly open gears. Blending, product development, packaging, transloading, warehousing, and distribution services are also available.

Manufacturer of wire rope and cable lubricants for marine industry. High-performance and biodegradable lubricants and water resistant and extreme-pressure greases are available. Offered in different specifications.

Manufacturer of braided products & accessories, using synthetic yarns & wires. Products include ropes for commercial fishing, utilities, sailing & proprietary applications. Weighted, dynamic, static & float lines, shock cords, specialty & rescue lines & custom products using high-tech materials such as Kevlar®, spectra & Dyneema®.

Distributor of O-ring greases for cable, wire, chain and rope applications. Features friction, wear and corrosion-resistant properties with a variety of operating temperature ranges. Available in tubes, pails and aerosols. Also offers oil and gel lubricants. Materials worked with include PTFE and silicone.

Manufacturer of calcium sulfonate and lithium grease for wire ropes, trolley wires, and cables. Specifications include 94 and 96 viscosity index and 9.25 and 8.29 lbs. per gal. density. Available with various features such as smooth and semi-fluid textures, oxidation and water resistance, thermal stability, and rust and corrosion protection. Also offers trailer axle, machinery, and coupling grease.

Distributor of abrasives & lubricants including cable, wire, rope & wire rope grease. Services include vendor managed inventory & process improvement. Markets served include electronic, foundries, aerospace, automotive, woodworking, metal working & ship repair industries.

Manufacturer of biodegradable and non-biodegradable corrosion resistant grease for sealing wireline, wire rope and cables. Biodegradable sealing grease is available in 235 to 314 cSt viscosity. Automotive, heavy duty fleet, off-road, aviation, environmental, extreme pressure, water resistant, high temperature and synthetic grease also available. Reduces friction and protects against corrosion from hydrogen sulfide (H2S), brine water, carbon dioxide (CO2), acids, caustics, chemicals, saltwater, drips and splatters. Suitable for food-grade, aircraft, sports, engine and drive train applications. Private labeling services and customized chemical solutions are also offered.

Distributor of abrasives & lubricants including cable, wire, rope & wire rope grease. Services include vendor managed inventory & process improvement. Markets served include electronic, foundries, aerospace, automotive, woodworking, metal working & ship repair industries.

Manufacturer of standard and custom wire rope and cable lubricants, specifically greases. Available in silicone and non-silicone dielectric grease types with temperature ranges of -40 degrees C to 200 degrees C. Synthetic and damping greases are also offered. Other products available are silicone fluids, compounds, and grease removers. Contract packaging and filling services are also offered. Serves the automotive, electrical, medical, oil and gas, marine, and food processing industries. ISO/TS 16949:2009 certified.

Manufacturer of wire rope & cable lubricants including grease. Specifications of wire rope & cable grease include pour point of minus 25 degrees F, flash point of 120 degrees F, viscosity of 3.28 at 100 degrees F & 12.8 at 40 degrees F, & specific gravity of 0.89. Wire rope & cable grease capacities include ability to penetrate wire rope, evaporate & leave a film of molybdenum disulphide in the core to lubricate each wire strand. Wire rope & cable grease can be applied by spraying, brushing or dipping in a in-line tank with no heating requirements. Grease is available in 25 lb. pail or 55 gal. drums. Compliant with ASTM standards.

A special blend of synthetic lubricants, solvents and Molybdenum designed to keep chains and wire rope in peak operating condition. Ideal for low speed conveyors, drive chains, hoists, winches, pulleys, rollers and come-alongs. Resists water wash-off and high-temperature sling off. NSF H2 Registered. 16 oz. aerosol; 10 wt. oz.

SWEPCO 150 Superior Wire Rope Grease is a semi-fluid grease, especially formulated for lubrication and protection of expensive wire ropes and cables. High performance synthetic base stocks and state-of-the-art overbased calcium sulfonate chemistry provide industry leading extreme pressure, antiwear and corrosion protection.

Coats exteriors to eliminate abrasive wear and corrosion. Prolongs the life of wire rope, sheaves, pulleys, drums, guides, pins and rollers in a variety of applications. These include cranes, hoists, marine tow and mooring lines, dockside cables, aerial tramways, dredges, draglines, mining, elevators and many other applications in construction, mining, transportation and manufacturing.

SWEPCO 150 Superior Wire Rope Grease is a high performance synthetic lubricant with state-of-the-art overbased calcium sulfonate chemistry that provides superior resistance to wear, rust and corrosion in a wide range of heavily loaded wire rope applications. Wire ropes run longer, cooler, smoother, quieter, more efficiently and more economically with greater equipment reliability and service life.

All Military Specification callouts have different meanings worth noting when buying Wire Rope, Cable, and Strand. Knowing the difference between the various callouts ensures you choose the right product for your applications. While some companies have limited types of Mil-Spec products, Strand Core has a wide range available. Strand Core sells five different Mil-Spec products:Mil-DTL-83420,MIL-DTL-87161,MIL-DTL-18375,MIL-DTL-83140, andMil-W-18242B. All five specifications are approved for use by all Departments and Agencies of the Department of Defense. Continue reading to learn more about each of these Military Specifications.

This specification explains the requirements for flexible wire rope designed for aircraft control. MIL-DTL-83420 covers requirements of carbon steel and corrosion-resistant steel for the flexible wire rope.

There are two types of wire rope that MIL-DTL-83420 includes: Type I (Non-jacketed Wire Rope) and Type II (Jacketed Wire Rope). Type I can operate within a -65 Degree F to +250 Degree F temperature range in dust, fuel, wind, and oil spills, in wash-down, and other environmental stresses and aircraft experiences. Type II can perform to the same operations, but with a jacket attached to the wire rope.

This specification explains the requirements of non-flexible wire rope used in aircraft applications. MIL-DTL-87161 covers the requirements for carbon steel and corrosion-resistant steel for wire strand used in aircraft applications.

The two types of wire strand within this specification are Type I (non-flexible, 1x7 class) and Type II (non-flexible, 1x19 class). Both types have two Constructions, one for Right Lay and the second for Left Lay. Both types must perform to specified levels for breaking strength, stretch limits, ductility of steel, test load, and coating adherences.There are two composition types of the wire rope. Composition A is made of carbon steel that is zinc coated. Composition B is made of corrosion-resistant steel.More information of Type I and Type II MIL-DTL-87161 can be found on pages 4 & 5 of our guidehere.

This specification covers the requirements for corrosion-resistant, nonmagnetic steel wire rope used in aircraft flight controls. The wire rope can operate within a -65 Degree F to +250 Degree F temperature range in dust, fuel, wind, and oil spills, in wash-down, and other environmental stresses and aircraft experiences.

For material, corrosion-resistant steel that is in accordance with SAE HS-1086 must be used. Each wire of the wire rope must be coated with a friction-preventing, non-corrosive lubricant. All MIL-DTL-18375 wire rope must meet the breaking strength, endurance, stretch limits, ductility of steel, test load, magnetic permeability and operating temperature range that has been provided. More information can be found on page 4 of our MIL-DTL-18375 wire rope guide.

This specification covers the requirements for rotation-resistant preformed stainless steel wire rope intended for aircraft rescue hoists, utility, retrieval hoists, and winching applications.

The preformed stainless steel wire rope is available in two types. Type I is a rotation-resistant 19x7 construction that is used for hoisting (vertical) operations. Type II is a rotation-resistant 10x7 construction (7x19 IWRC) used for winching (vertical, horizontal, or at-angle) operations. Similar to other Mil-Spec products, packaging, testing and certain performance levels must be met.

If you are interested in learning more about the Mil-Spec products sold at Strand Core, please visit our website here. If you want to learn more about the various specifications that our Strand, Wire Rope, and Cable products are manufactured to, check out our Specifications webpage. If you have any questions, our team is happy to help! Reach out to us by email through sales@strandcore.comor by phone at 800-983-9926.

DESCRIPTIONWire ropes contain numerous moving parts that require lubrication. Each time the rope bends or flexes, the internal strands rub together. WRL™coats these strands to prevent friction and wear. This results in longer life, less downtime for rope changes and more production.

JET-LUBE’s WIRE ROPE and CHAIN LUBRICANTquickly penetrates to the cores. This ensures that the rope is lubricated throughout while providing a nondrying, non-tacky film on the outside of the rope that protects outer strands from corrosion, as well as lubricating the wire rope drums and sheaves.