slurry tanker hydraulic pump brands

... JOSKIN slurry tankers for several years. The success of this range lies undoubtedly in its design: low centre of gravity, light self-supporting tank with integrated chassis, hot-dip galvanisation of most ...

The Modulo2 slurry tanker is a vehicle with self-supporting structure. Available in single-axle version from 2,500 to 11,000 l and double-axle version from 8,400 to 20,000 l, it is the bestseller in the ...

The Cobra2 slurry tanker is available with a capacity from 11,000 l to 14,500 l and only with a single axle. Compact thanks to the short tank with a large diameter (1,900 mm to 2,100 mm ...

... with a tandem chassis and has a capacity of 14.850 to 18.450 litres. The tank is available as a vacuum version and as a screw pump version, and can be equipped with various options.

... compressor and centrifugal pump — centrifugal pump), the combi tanker can also be used as a pumping station. The suction opening can be used as an additional ...

... SlurryMaster 8000 which, in combination with the model’s robust high capacity pump and built-in flow control system, ensures efficient and accurate dosing and placement of the slurry to benefit the crop, ...

... circulating system is that when the gate valve on the applicator spreading is closed, the automatic system will allow the slurry to circulate back to the tank or the lagoon

The Abbey Machinery Slurry Tanker range caters for the ‘Total Cow’ by handling the waste product in an economic and environmentally way. It consists of the most extensive range of tanker ...

The standard range of slurry tanks come in 1100 gallon to 2100 gallon. They come mounted on a rigid drawbar and heavy duty ADR axle with a range of wheel options. Wheel options include 385/65 R22.5, 425/65 R22.5, 1300 ...

Vacuum tankers by BSA have established themselves on the market in the last few years and have been designed according to legal provisions. Vacuum tankers use the vacuum produced by the compressor in ...

Our commercial slurry tanks range in size from 1100 gallons to 2750 gallons. Heavy-duty commercial axles with 420×180 brakes ensure maximum safety in a commercial ...

... Redrock vacuum tankers are made with 6mm high grade rolled steel. The tankers are welded internally and externally and fitted with anti-enclosure rings to ensure the strains exerted on the tank are limited.

For an efficient and effective utilization according to specific needs, are available various accessories, thanks to our these innovative slurry distribution ...

With numerous recent prestigious awards for Innovation, SlurryKat are now seen as the world technical leaders when it comes to complete packages comprising ...

... roads. With an DP/APV pump unit the slurry is pumped directly to the spreader via pipes and hoses, eliminating the need for transportation with tankers on public roads.

Single axle slurry spreader with mechanical brakes and galvanized tank (2.700 l.) 6 hole heavy axle. Galvanized tank with transparent paint. rear hydraulic d. 100 gate valve with deviator on the hydraulic ...

Battioni Pagani MEC vacuum pumps are used in agriculture for emptying cesspits and to transport slurry or effluent. Farmers benefit from being able to transport slurry to use it as a natural fertiliser in irrigation.

We have now been selling this vacuum pump to farmers in the UK and overseas for over a decade (inline with efficiency improvements over the years). It is a popular choice by farmers due to it"s high quality and reliable design.

The vacuum, compression and lubrication of the MEC vacuum pumps is quality tested by Battioni Pagani at several stages during production to ensure a trouble free installation and high quality pump.

MEC 8000 pumps are supplied ‘dry’. Oil must be added to the gearbox and drip feed reservoir before use. Scroll down to purchase the genuine Battioni Pagani lubricant oil from our "Parts and Accessories" page.

Whisper Pumps have been supplyingagricultural pumpsto farmers nationwide for over 25 years, meaning we are highly experiencedin dealing with the particular challenges on your farm.If you are unsure on the right pump model you require, please contact our technical sales team today on 01777 871100 for free, expert advice.

Vacuum tankers up to & including 2000 gallons are fitted with a Jurop 9000 litre pump as standard. 2300 gallons & above are fitted with a Jurop 11000 litre pump. Manual pump changeover is standard, along with a syphon tank for maximum pump protection. The vacuum pump creates an atmospheric pressure difference in order to fill or empty the tanker. When the vacuum is created within the tanker, the outside atmospheric pressure is responsible for pushing the slurry into the tanker. When spreading, the opposite occurs. Pressure is increased within the tank and this increase in pressure within the tank allows the slurry to be spread via splashplate or rear implement.

Hydraulically driven pumps offer greater safety to the operator by eliminating a PTO. This allows for increased efficiency with constant spreading or filling through corners without any damage to the pump. The hydraulic driven pump is simple to use and requires one double acting spool and a ¾” non-restricted return.

Reduce noise levels during pump operation and provide a cleaner environment around your farm. Exhaust fumes are diverted through the chassis where excess oil is collected to keep your pump and yard clean.

Switch between vacuum and spreading at convenience and speed. Have your tank primed for refilling before you even reach the pit with a hydraulic change-over added to your pump.

Fruitland Manufacturing RCF500 Vacuum Pumps are designed to work in all types of liquid waste handling markets including the Oil and Gas Fracturing Industry, Industrial, Environmental, Grease and Septic.

Fruitland RCF500 Vacuum Pumps have an approximate air flow of 396 CFM and pressures to 35 PSI. They have a maximum vacuum of 28.5″ Hg at 44 BHP and require 23 BHP power at 27″Hg. The RCF500 vacuum pump has an operating speed of 1400 RPM and a 3″ port size. These are automatically lubricated with an included oil pump and have 8 Kevlar vanes. The 500 series pumps use less oil than any other rotary vane pump in the industry. Applications for the 500 pump are universally used throughout oil & gas fracturing, environmental, industrial and septic industries.

The RCF500LUFH is a RCF500 vacuum pump with the following options. (L) Left hand or Counter-clockwise rotation (when looking at the pulley or drive shaft). (U) The four-way diverter valve is installed on top of the pump. (F) This pump includes the filter option. (H) This pump includes the hydraulic drive adapter.