slurry tanker hydraulic pump pricelist

... JOSKIN slurry tankers for several years. The success of this range lies undoubtedly in its design: low centre of gravity, light self-supporting tank with integrated chassis, hot-dip galvanisation of most ...

The Modulo2 slurry tanker is a vehicle with self-supporting structure. Available in single-axle version from 2,500 to 11,000 l and double-axle version from 8,400 to 20,000 l, it is the bestseller in the ...

The Cobra2 slurry tanker is available with a capacity from 11,000 l to 14,500 l and only with a single axle. Compact thanks to the short tank with a large diameter (1,900 mm to 2,100 mm ...

... with a tandem chassis and has a capacity of 14.850 to 18.450 litres. The tank is available as a vacuum version and as a screw pump version, and can be equipped with various options.

... compressor and centrifugal pump — centrifugal pump), the combi tanker can also be used as a pumping station. The suction opening can be used as an additional ...

... SlurryMaster 8000 which, in combination with the model’s robust high capacity pump and built-in flow control system, ensures efficient and accurate dosing and placement of the slurry to benefit the crop, ...

... circulating system is that when the gate valve on the applicator spreading is closed, the automatic system will allow the slurry to circulate back to the tank or the lagoon

The Abbey Machinery Slurry Tanker range caters for the ‘Total Cow’ by handling the waste product in an economic and environmentally way. It consists of the most extensive range of tanker ...

The standard range of slurry tanks come in 1100 gallon to 2100 gallon. They come mounted on a rigid drawbar and heavy duty ADR axle with a range of wheel options. Wheel options include 385/65 R22.5, 425/65 R22.5, 1300 ...

Vacuum tankers by BSA have established themselves on the market in the last few years and have been designed according to legal provisions. Vacuum tankers use the vacuum produced by the compressor in ...

Our commercial slurry tanks range in size from 1100 gallons to 2750 gallons. Heavy-duty commercial axles with 420×180 brakes ensure maximum safety in a commercial ...

... Redrock vacuum tankers are made with 6mm high grade rolled steel. The tankers are welded internally and externally and fitted with anti-enclosure rings to ensure the strains exerted on the tank are limited.

For an efficient and effective utilization according to specific needs, are available various accessories, thanks to our these innovative slurry distribution ...

With numerous recent prestigious awards for Innovation, SlurryKat are now seen as the world technical leaders when it comes to complete packages comprising ...

... roads. With an DP/APV pump unit the slurry is pumped directly to the spreader via pipes and hoses, eliminating the need for transportation with tankers on public roads.

Single axle slurry spreader with mechanical brakes and galvanized tank (2.700 l.) 6 hole heavy axle. Galvanized tank with transparent paint. rear hydraulic d. 100 gate valve with deviator on the hydraulic ...

Simple filling from the tractor seat, available in 6” & 8” size. Vacuum only or massively increase fill rate with a turbo pump at the end of the arm, doubling the filling rate.

Have your new tanker painted in any colour. SlurryKat paint is an exclusive industry acrylic formula with a gloss finish and guarantee unmatched by any other manufacturer.

Premium plus tankers are equipped with self steering axles as standard base spec. Forced-positive steering can be optionally selected on tandem & tri axle tankers.

Simple filling from the tractor seat, available in 6” & 8” size. Vacuum only or massively increase fill rate with a turbo pump at the end of the arm, doubling the filling rate.

Have your new tanker painted in any colour. SlurryKat paint is an exclusive industry acrylic formula with a gloss finish and guarantee unmatched by any other manufacturer.

Premium plus tankers are equipped with self steering axles as standard base spec. Forced-positive steering can be optionally selected on tandem & tri axle tankers.

Wide range of Slurry Parts, Ranging from Slurry Tanker Parts, Side Spreader Parts And Slurry Mixing Pump Parts. We also stock a wide range of Abbey Slurry Tanker Parts. | Buy Online | In-Stock Parts next day Delivery To Northern Ireland. All Other Parts available to order 3 to 5 Days Delivery To UK and Ireland.

*ADE EnginesADE PartsAgriAttachmentsAuctionsAxial Piston PumpsAxleAxle HousingB20AB30ABakkieBattery EqualiserBellBell 1206Bell 1756Bell B17BBell B18BBell B18DBell B20BBell B20CBell B20DBell B25ABell B25BBell B25CBell B25DBell B30BBell B30CBell B30DBell B40Bell Bomag RollerBell CabsBell EquipmentBell L1204Bell L1506DBell L1706CBell L1706EBell L2206Bell L2208Bell L2706DBell L2706EBell SparesBell Tow Tractor 1206Bell Tow Tractor 1756BroomBucketsBulldozerCabsCatering Kitchen EquipmentCaterpillarCaterpillar Engine PartsCaterpillar EnginesCentrifugal PumpsChain BlockChain SlingCherry PickerCoke Welldeck TrailersCompressorsConcreteCraneCummins EnginesCummins PartsCylindersDam ScoopsDana SpicerDashDeutz EnginesDeutz PartsDezziDiesel Bowser TrailersDiesel Water PumpDifferential Centre PortionDiffsDollyDolly TrailersDrawbar TrailersDrill RigsDrillingDrive MotorDropboxECUElectric Water PumpElectricalElectrical MotorsElectrical MotorsElectrical WinchElectronic ControllersEnginesExcavatorFinal Drive / Planetary GearsFlameproofFlow AmplifierFlow MeterFoodFood Manufacturing EquipmentForestryForkliftForklift SparesFront End Loader AxleGate ValvesGear PumpsGear SelectorGearboxGenset EnginesGensetsGraderHackney TrailersHatz EnginesHaymaking & Grass CuttersHigh Pressure Mud PumpsHoney Sucker TrailersHydraulic HosesHydraulic PumpsHydraulic WinchHydraulicsHydrostatic PumpsIndustrialIndustrial GearboxIndustrial TanksInjection PumpsInjectorsJohn Deere EnginesJoystickLimit SwitchesLister EnginesLowbed TrailersMaize MillMAN EnginesMAN PartsMercedes Benz EnginesMining EquipmentMiscellaneousMotorsMulti Stage PumpsOil CoolersOM906Orbital ValvesOther Bell PartsOther EnginesOther Engines PartsPartsPerkins EnginesPerkins PartsPlanters & SeedersPloughsPneumatic breakerPneumatic WinchPowerpackPulleyPump DrivesRadiators and IntercoolersRollersSemi TrailersSheave WheelSide ShaftSnatch BlockSolid TyresSPECIALSteering AxleTCUTelehandlerTipper TrailersTLBTLB AxleTLB CabsTLB SparesToysTractor AxleTractorsTrailer PartsTrailersTransfer CaseTransmissionTransmissionsTrencher DiggerTruck CabsTruck Front AxleTruck PartsTrucksTyresValve BankVibrating MotorsWater Bowser TrailersWater PumpWater PumpsWinchWoodWoodchippersWorkshopZIMBABWE

Cornell has incorporated many unique and innovative design features into its liquid waste slurry pumps, while maintaining the company’s position in the industry as a leader of heavy-duty, low-maintenance pumps.

Cornell’s liquid waste slurry pumps have been used successfully in a variety of farm, industrial and municipal waste applications. Their slurry and non-clog pumps are used in big gun applications, injection systems and liquid manure transfer. These pumps are designed specifically to handle manure slurry applications and provide a long service life.

The company’s manure slurry pumps are designed to deal with grey water with 0 to 15 percent solids, and feature both open and closed impellers, handling a range from low to high operating pressures, and low to high flow requirements.

The company’s Redi-Prime system—featuring vacuum assist (diaphram) pumps and the patented Cycloseal and run-dry features—is available on most pumps. It is fully automatic, compact, self-priming and features high hydraulic efficiencies

The F-3000 series of submersible chopper pumps from ITT Flygt Corporation are the toughest and most reliable pumps for handling animal waste, dairy and farm wash-down, poultry wastewater sumps and fibrous waste applications, the company says. Pumps are available in 4” and 6” models, with motors ranging from two hp through 20 hp.

The latest in quality manure pumps from Husky Farm Equipment Ltd is the PL490 lagoon pump. This pump is one of the first to have the adjustable wheel carriage and an internal drive line. The PL490 pump has a gearbox in the manure to keep the fan close to the bottom of the lagoon. The gearbox is sealed from the manure with a series of greaseable seals on both sides.

Husky has continued its strong design/engineering trademark with a dual walking undercarriage. This walking undercarriage will go over a straight concrete wall of 14’. Husky will supply an 8” or a 10” discharge pipe on this pump, making the PL490 one of the fastest lagoon pumps at 10,000 gpm.

Husky is a family-owned and operated manufacturing company established in 1962. The company makes quality equipment that operators can depend on, complete with parts books and operators manuals. It has a complete line of equipment from 3”, 4” and 6” electric pumps up to 10” pumps that use up to 200 hp. Husky’s newest propeller is a raceway designed unit with an auger blade and shroud. This will complement the 24’ and 30’ propellers that Husky already produces.

The powerful chopper of Bauer’s Magnum pumps can handle up to 12 percent solids. The pumps feature a radial housing and their large-dimensioned pumping channel ensures unobstructed delivery of viscous liquids. The rinsing connection is designed for flushing the seal chamber with clean water to keep fibers and solids from settling. The result is higher operational safety and longer pump life. The pumps have compact spur gearing with case-hardened helical gearing running in an oil-bath. With the cutting flange, the high-grade casting and hardened cutting edges guarantee long life. It provides excellent cutting performance on cutting edges and impeller, says the company.

The units feature a case-hardened pump shaft with angular contact ball bearings or cylindrical roller bearings. The impeller is a special casting with hardened cutting edges. It offers higher efficiency with an ideal runner blade geometry. Offering excellent pumping capacity, it is best suited for viscous liquids due to its screw-type impeller center.

The Fisher manure pump is capable of pumping rocks, pop cans, hooves and many of the other types of debris that find their way into typical manure pits. The particle size going into the pump is regulated by the openings on the rock guard. The impeller design can better accommodate animal hair, straw and hay, which are commonly found in this type of application. For manure screener applications, the high volume of a Fisher manure pump, when equipped with an agitation port, allows for some of the volume to be directed back into the manure pit for agitation.

Fisher pumps use a cantilever shaft that allows the bearings to be placed above the fluid level. This bearing placement minimizes bearing exposure to contamination and helps achieve longer bearing service life.

These pumps, manufactured with 1/4” and 3/8” steel plate and heavy walled tubing, utilize a rugged all-welded construction. There is no need to be concerned about assembly bolts working loose or seals and gaskets developing leaks.

In addition to the standard pump sizes offered by the company, custom-made pumps can be manufactured to meet the customer’s needs. Besides the standard electric motor drives, Fisher Pumps offers PTO and hydraulic drive units. Floating pump units for aeration or tail water pumping are also available.

To rapidly homogenize and pump liquid manure in a pit up to 16’ deep, the company has a new 1,000 rpm speed reducer with timing belt that is now available on three-point, hitch articulated Agi-Pompe and Super Pompe. This 1,000 rpm option includes a 77 Series joint protected by an oil bath.

The pump is equipped for immediate plug-in start and incorporates dry running protection. It has low weight for easy handling and low maintenance with the ABS service-friendly modular system. The sludge pump is designed around robust hydraulic parts in wear-resistant nodular cast iron for reliable performance and a vortex impeller for minimum clogging risk. The company says it offers cost-effective pumping with a compact design, and high efficiency and low maintenance requirements.

The ABS pump features robust hydraulic parts for tough conditions combined with lightweight motor components for easy handling. It has an effective and efficient modular system of construction for low inventory costs and easy service.

N-Tech, a division of NTH, Inc of Barron, Wisconsin, has introduced a new trailer model irrigator feed pump modeled after the solid design of all N-Tech trailer pumps.

It will run off high volume tractor hydraulic systems or separate power packs. The standard length of 34’ reaches well into most storage basins or lagoons, according to the manufacturer.

Gorman-Rupp Company manufactures the 10 & MA series line of self-priming centrifugal solids handling pumps, with flows of 670 gpm max and 85 ft head max. With the addition of their unique cutter blades and special wear plate, the pumps can be adapted to handle waste, which includes straw.

The M series, designed to handle all types of animal waste, will pass 3" spherical solids. It has max flows to 1,300 gpm and max 106 ft. head, engine or electric driven. Any pump can clog. But should this happen to an M series pump, the coverplate can be removed, the pump interior cleaned out, the coverplate replaced, then simply reprime and begin pumping.

The pumps come in standard lengths of 6’, 8’, 10’ and 12’, with other sizes available on request. Their unique design allows operation of the pump with 2’. offset. Example: an 8’ pump works fine in a 6’ pit with no modifications. This is a pump said to be ideal for hog, dairy or beef reception pits.

horizontally, even under full power. Vertical nozzle adjustment is 90 degrees. The high-pressure hose on the mixing nozzle prevents waste spraying all over and aids in sustaining the pump’s tremendous pressure.

Livestock operations can also choose from Balzer’s horizontal slurry pumps. Slurries with high concentrations of solids, straw, or bedding, weeds etc, are no

problem for these pumps. The patented chopping system handles the toughest jobs, guaranteed, says the company. Easy priming, high pressures and tremendous suction sets Balzer horizontal slurry pumps apart. PTO, diesel, or gas engine and electric motor models are available.

Direct drive pumps have an oil bath bearing system and mounting pedestal. They can be used with diesel and gas engines or electric motors. High tech tungsten carbide seal on the pumps give long life. Heavy duty gear boxes have a variety of gear ratios.

The commercial-duty series 8000 lagoon pump from Jamesway is designed for fast agitation and loading, ease of operation, and rugged dependability. Available in 32’, 42’ and 50’ lengths, the series 8000 pump is designed for tractors with more than 200 hp at 1,000 rpm.

stability, an 8” loading pipe for faster filling, and all hydraulic controls for convenient operation from the tractor seat. Agitation capacity is rated at 7,000 gpm and spreader loading capacity is rated at 3,000 gpm.