gates kelly hose factory

New rubber compounds, higher working pressures and temperatures, stricter environmental and safety regulations – all make hose selection a challenge. At Gates, we make it easy. That’s because our line of high pressure oilfield hoses are made with the demands of today’s drilling methods in mind. From rotary-vibrator drilling hoses to choke and kill hoses, find oilfield hoses built tough to handle the pressure.

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

Example: "Gates® Black Gold® Rotary Vibrator 3 Inch Max WP 7500 PSI API SPEC 7K Tested To 15000 PSI Grade E FSL 1 Temp Range 1 ISO 14693 License 7K-0003 Made In U.S.A."

ISO 9001:2000 certified custom manufacturer of abrasion, oil & weather resistant reinforced hose with tubes, covers & fittings for rotary drilling & exploration work. Hose are available in various models with specifications including 2 1/2 in. to 5 in. ID, 3.06 in. to 8.90 in. OD, 5 ft. to 100 ft. length, 2500 psi to 7500 psi rated working pressure, 48 in. to 72 in. minimum bend radius, 3 in. to 6 in. API thread, 2 in. to 3 in. NPT thread, minus 40 degrees F to plus 200 degrees F operating temperature & 3.9 lbs. to 43.6 lbs. weight/ft.

The kelly rotary drilling hose is flexible Connection between standpipe and swivel(Rotary Drilling) or between pump and standpipe(Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Kelly Rotary drilling hoses are used in oil fields, well cementing, well repairing, geological explorations, small drilling machine, and water

Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.

The high pressure hoses are a bonded construction comprising steel and elastomeric materials. The principal characteristic of bonded construction is the build-up of individual layers in the flexible hose wall which are then combined into one unit through vulcanisation. Hose assemblies are manufactured as a single bonded unit to specified lengths where the couplings are a chemically bonded integral part of the hose.

Protects the polymer lining from mechanical damage, prevents blistering in case of high pressure gas service and decompression with vacuum service, supports the wall of the flexible hose. This layer is optional and present only for rough bore hoses, such as for flexible choke & kill lines with TauroFlon™ liner.

Fluid barrier of the flexible line. Protects the hose construction from corrosive and abrasive effects of the conveyed medium. The thickness of lining depends on the internal pressure, the inside diameter and the conveyed medium. The lining material is selected to withstand chemical and heat effects of drilling mud, well effluents, cement slurry, hydraulic fluid or whatever substance is conveyed through the hose.

A more economical alternative to our polyurethane layflat hose. Warflex is reinforced with high–tenacity polyester yarn and coated through the weave with a 70% nitrile rubber / 30% PVC blend for good chemical resistance for produced water. Less abrasion resistance and puncture resistance. Custom hose color and branding available on big volume orders.

The new Midwest Hose Layflat Deployer completes our extensive water transfer portfolio. Our Direct Drive System makes our deployer one of the fastest, most powerful, and easy to use on the market with the capacity to deploy and retreive layflat hose up to 16″ in diameter.

Ideally suited for any high pressure hydraulic applications where there is a need for hoses to be Fire Rated and capable of working in extreme heat in the event of an emergency.

Hoses have a higher working pressure than normally available chemical hoses. CPE handles a wide variety of acids, alcohols, salt solutions, and petroleum based products.

Lightweight chemical transfer hose designed for almost every common industrial chemical used in industry today (98% of chemicals) without staining / contamination.

Designed for applications that required the hose to slide easily or require visual confirmation of material flow. Great for pumping water and light chemical solutions. Popular with pumping equipment because it handles suction discharge uses.

Lightweight, flexible, rugged suction/discharge hose that has good chemical resistance. Excellent for transferring fertilizer solutions, septic solutions, and pesticides. Hose remains flexible in sub-zero temperatures. Helix serves as a scuff strip.

Economical general service suction and discharge hose used for pumping water and light chemical solutions. PVC helix increases flexibility and abrasion resistance while the smooth interior provides maximum flow.

Designed for water discharge in construction, heavy duty equipment rental, and mines and quarries. Soft-wall hose construction provides similar performance to a layflat hose but a higher working pressure and more abrasion resistance.

Mud discharge hose designed for petroleum waste, drilling mud, diesel, and water. The standard to transfer liquid mud at high pressures from the mud pump.

Designed for use with push-on fittings for air tools, petroleum products, gasoline, mild chemicals or water. No clamps or special tools required. Hose reinforcement laid at the most effective angle for maximum strength and coupling holding ability.

Wire braid steam hose for saturated and superheated steam up to 250 PSI 450° F. Cover is pin pricked to allow venting to eliminate blistering and cover separation.

General purpose hoses for open end discharge. Non-absorbing, mildew proof, and rolls up flat for easy storage and handling. Common in construction, agriculture, irrigation, marine, and rental applications. PVC hoses resistant to oils, grease.

Designed to handle edible liquids, vegetable oils, salad dressings, vinegar, mustard and meat products requiring a sanitary hose which will not impair taste. Great for service with hot oil fat filters and fryers.

Designed as a hydraulic brake hose for vehicles and motorcycles. The average life of a brake hose is six years. Brake hoses swell with age and restrict flow. Generally all brake hoses on a vehicle deteriorate at the same rate.

Air Brake Tubing, Steel Brake Line Tubing Assemblies, Steel Brake Line Tubing Coils, Rubber Air Brake Hose, Silicone Coolant Hose, Silicone Heater Hose, GPR Radiator Hose, Rubber Heater Hose, Garage Exhaust Hose, Air Conditioning Hose

Camlocks, Petroleum Handling, Industrial and Oilfield Hose Ends, External Swage Hose Ends (Holedale), Crowsfeet Couplings, Sand Blast Couplings, Ground Joint Couplings, Bauer Style Quick Connects, Ringlock Fittings, Storz, Foot Valves and Strainers, Airline Accessories, Industrial Accessories, Clamps, Pressure Washer, Safety and Protection Products

Available in sizes 1/4″ – 12″. Operates in high/low temperatures. Fire safety up to 1200° F. No permeation of gases. Full vacuum. Annular is hydroformed, a process that enhances flexibility and extends the life of the hose. Suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum.

Plug Valves, Swivel Joints, J-55 and N-80 Pup Joints, Integral Fittings, Steel Hose Loops, Crossover Adapters and Swages, Blast Joints, Manifolds, Bull Plugs and Caps

37° JIC, Pipe, Pipe Swivel, O-Ring Kits, O-Ring, Split Flange, Face Seal, Hose Barb, Flareless Bite Type, Metric, BSPP, BSPT, Inline Live Swivel, 90° Live Swivels, 90° Dual Plane Live Swivels, Test Points, Thread ID Kits

Inverted Flare, SAE 45° Flare, Compression, Self Aligned, Polyline Flareless, Push-Connect, Push-Connect Air Brake, Compression for DOT, Compression for Air Brake Copper Tubing, Threaded Sleeve, Pipe Fittings, Needle Valves, Drain Cocks, Truck Valves, Ground Plugs, Multiple Shut-Offs, Hose Barbs, Push-On Hose Barbs, Garden Hose Fittings

Drilling hosesare used for flexible connection between standpipe and swivel (Rotary Drilling) or between mud pump and standpipe (RotaryVibrator) for pumping mud at extra high pressure in oil drilling work, up to 93 C degree.

Table of Contents Section F or Oilfield Hose and Industrial Service Hose specifications, refer to the Gates Industrial Hose, Couplings & Equipment catalog (#39496-000). F or Hydraulic Hose and Equipment (Crimper) specifications, refer to the Gates Hydraulic Hose, Couplings & Equipment catalog (#35093).

Gates Worldwide Locations Gates Corporation 1551 Wewatta Street, P.O. Box 5887 Denver, Colorado 80217-5887 Tel: (303) 744-5070 Fax: (303) 744-4540 Gates Rubber Co. (S) Pte. Ltd. No. 1 Changi South Street 3 Singapore 486477 Tel: 65-545-3800 Fax: 65-545-5322 Gates Canada, Inc. 225 Henry Street, Bldg. #8 Brantford, Ontario, N3S 7R4, Canada Tel: (519) 759-4141 Fax: (519) 759-0944 The Gates Group (Shanghai) Co., Ltd. No. 15 Hai Tang Street China-Singapore Suzhou Industrial Park Suzhou 215021, PR China Tel: 86-521-6761-9633 Fax: 86-512-6761-7184 Gates de Mexico, S.A. de C.V. Cerrada de Galeana...

Super Choke & Kill or 15,000 W.P. Cementing Hose Request for Quote/Order Form 1.  You must fill in all the information on the form in order to have your quote request/order processed. Any missing information can lead to costly delays in processing your request. If there are any questions about any part of the form or the application, check details with your oilfield customer, or call Ron Trujillo at 303-744-4735. The Date, Customer Name, P.O.# (if actual order) must be completed. Hose Type is Super Choke & Kill or 15,000 W.P. Cementing. Hose Size is the Hose I.D. Fill in Overall Length of...

Quote/Order Form S C&K or CEMENTING HOSE REQUEST FOR QUOTE \ ORDER Hose Size Hose Type _ Safety Clamp & Chain □ S C&K Hose 15,000 psi W.P. - 22,500 psi test - Spec 475SL □ Cementing Hose 15,000 psi W,P, - 22,500 psi test - Spec 4758L Overall Length Working Pressure Add-On Fittings (will be furnished welded) | TPC: Working Pressure. Working Pressure _ Nominal Size Pipe Size_ HAMMER UNION-MALE SUB/NUT Pipe Size. Nominal Size. Nominol Size Working Pressure .Nominal Size. Working Pressure _ Pipe Size _ HAMMER UNION-MALE SUB/NUT Pipe Siie. Nominal Size. CERTIFICATIONS /STANDARDS * =Request...

Gates High Performance Dynamic Pressure Rated Rotary Hose Assemblies To keep pace with rapidly advancing drilling technology involving directional drilling and down-linking with negative pressure pulses, Gates offers a high performance API 7K rated rotary hose assembly that far exceeds minimum standards. In addition to a high quality hose construction, the Gates system has a swage attached coupling with no seals to leak and no set screws to loosen with operation vibrations or epoxy to weaken with working temperatures above 180°F. Burst test results significantly exceed the API 7K minimum...

Gates Oilfield Hose Flow Rate Limits On some oil rigs, the flow rate of mud to the drill pipe has been increased significantly. Flow rates as high as 3,100 GPM have been reported. Three pumps aligned to work together can be set up to produce the higher flow rate. Replacing these expensive components more frequently is compounded with the additional service downtime. There are factors that need to be considered to safely and cost effectively provide such a high flow rate. As flow rate (GPM) increases, velocity of that fluid through a conduit such as a hose or a pipe will also increase. As...

Safety & Maintenance of Gates Oilfield Hose Assemblies Foreword The objective of this manual is to emphasize SAFETY by providing recommended procedures for proper handling, storage, use and maintenance of Rotary/Vibrator/Choke & Kill/BOP hose assemblies. External inspection and field pressure testing prior to any continued service of a hose assembly is critical to ensure safe operation. These are MANDATORY PROCEDURES for applications where an assembly failure could result in serious bodily injury or severe property damage. Scope This procedure is a recommended practice for the storage,...

Safety & Maintenance of Gates Oilfield Hose Assemblies Storage 1. ompletely drain hose assembly before C placing in storage. Caution: Care should be exercised to prevent mishandling. Crushing or kinking of hose can cause severe damage to reinforcement. If this occurs, remove hose from service and then contact local Gates representative for further advice. 2. henever feasible, store hose in original W shipping crate. This will provide extra protection against the deteriorating effects of solvents, corrosive liquids, ozone and sunlight. Hose should be stored so coils are in a horizontal...

Safety & Maintenance of Gates Oilfield Hose Assemblies Recommended Practices Where applicable, the following recommended practices should be used on rotary drilling and vibrator hose. A. Overall Hose Length 1. ncludes standard connector and/or I special adapters (see Figure 3). B. Rotary Hose Length 1. n order to avoid kinking hose, the I hose length and standpipe height should be such that when raising or lowering, as in making mouse hole connections, the hose must not exceed the rated minimum bend radius at the swivel when it is at its lowest drilling position and at the standpipe when it...

Safety & Maintenance of Gates Oilfield Hose Assemblies D. Vibrator Hose Length 1. It’s important to choose a vibrator hose having an inside diameter equal to that of the pump discharge fitting and the fluid supply line inside diameters. This is necessary to allow free flow of fluid and to avoid turbulence or unnecessary abrasion of the hose tube. The length of vibrator hose should be given careful consideration. It should be long enough to prevent kinks near the couplings, yet short enough to prevent kinks in the radius near the middle of the hose. E. Hose Connections 1. ine pipe threads...

Safety & Maintenance of Gates Oilfield Hose Assemblies Operations Caution: Care should be exercised during operation to prevent crushing or kinking of hose. Crushing or kinking can cause severe damage to cable reinforcement. If this occurs, remove hose from service and test as outlined in the “Field Test Pressure” section. A. Working Temperature 1. orking temperature should not W exceed the rating of the hose. Temperatures encountered higher than the rated temperature will reduce hose life expectancy. B. After Coolers 1. ompressors should always be C equipped with after coolers to lower the...