gates kelly hose in stock

New rubber compounds, higher working pressures and temperatures, stricter environmental and safety regulations – all make hose selection a challenge. At Gates, we make it easy. That’s because our line of high pressure oilfield hoses are made with the demands of today’s drilling methods in mind. From rotary-vibrator drilling hoses to choke and kill hoses, find oilfield hoses built tough to handle the pressure.

Example: "Gates® Black Gold® Rotary Vibrator 3 Inch Max WP 7500 PSI API SPEC 7K Tested To 15000 PSI Grade E FSL 1 Temp Range 1 ISO 14693 License 7K-0003 Made In U.S.A."

High-pressure hydraulic oil lines. Exceeds ISO 18752 Grade B, SAE 100R17 and ISO 11237 R17 working pressure, minimum bend radius requirements and performance requirements of EN 857 1SC. M3K hose has smaller exterior dimensions and significantly tighter bend radius than other SAE 100R1 and 100R2 hose.

465711574M3KXREEL, 7048570485 4M3KXREEL072053318623Automotive Hydraulics -> Hydraulic Hose -> Global M3K Mega3000 Hose - SAE 100R17Hydraulics -> Hydraulic Hose -> Global M3K Mega3000 Hose - SAE 100R17

The power braided slim hole rotary reinforced hose swaged and coupled with FIG H2S Hammer head Union connections on both the ends. The mating Male/Female Hammer head Union complete assembly parts to be included in the supply.

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

ISO 9001:2000 certified custom manufacturer of abrasion, oil & weather resistant reinforced hose with tubes, covers & fittings for rotary drilling & exploration work. Hose are available in various models with specifications including 2 1/2 in. to 5 in. ID, 3.06 in. to 8.90 in. OD, 5 ft. to 100 ft. length, 2500 psi to 7500 psi rated working pressure, 48 in. to 72 in. minimum bend radius, 3 in. to 6 in. API thread, 2 in. to 3 in. NPT thread, minus 40 degrees F to plus 200 degrees F operating temperature & 3.9 lbs. to 43.6 lbs. weight/ft.

Our inventory of hydraulic hose, fittings and adapters is stocked with premier manufacturers, vast and local. Able Hose is a premier Gates distributor that can meet the needs of high-powered, high-pressure hydraulic equipment with its MegaSys line. As part of an integrated solution, the spiral-wire and wire-braid hose and coupling products offer peak performance and flexibility. Our customers are in the most demanding industries such as construction, refuse, agriculture, mining and oil and gas. Customers applications challenge the strength and durability of even the toughest components. We can crimp 1/4″ – 2.5″ up to 10,000 PSI working pressure and 1-1 & 1/2″ up to 6000 PSI working pressure.

Our quality hydraulic hose assemblies feature improved hose construction technologies such as improved wire reinforcement designs and processing and new insulation materials that are abrasion resistant and color-coded (making it easy to install).

High Pressure Drilling Rotary Hoses is used in drilling and exploration work. Suitable for hydraulic fluids, such as hydraulic oil, fuel oil, lubricants, emulsion, glycol and water.Drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake. To transmit high pressure oil or water based mud.

Recommended For:Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotary drilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.