drilling mud agitator manufacturers in stock

Dragon pump accessories are constructed to handle the harsh oilfield environment. Dragon stands ready to support our drilling and oilfield customers with the highest quality equipment in the industry. And, as always, Dragon backs every product it manufactures with the support you need.

Our agitators feature the new dracomet coated corrosion resistant keyless coupling for easy installation and impeller adjustment. The units come complete with base plate, motor, gearbox, impeller, shaft & couplings.

As Mud Agitator Manufacturer, Brightway can supply BWJBQ 5.5-22kw Mud Agitator for mud tank and mud system. including: Horizontal Mud Agitator or Vertical Mud Agitator. Brightway mud agitator can be customized once we get the detailed requirements. Buying mud agitator from Brightway will be your best choice for drilling mud circulation system.

1. Brightway mud agitator equips with a motor couple to a rugged oilfield gearbox, which can eliminates troublesome couplings, misalignment and have a longer bearing life. And it is driven by the explosion-proof motor, coupled to a gearbox which will drive the impeller shaft. Due to the simplex turbine structure of shaft,

2. Brightway mud agitator is featured by compact construction, light weight, balanced transmission, small footprint, low noise and high efficiency. And its impeller turbines can transform the mechanical power into drilling fluid agitation as well as circulation.

3. Brightway mud agitator can be designed per customer’s requirement to choose the helical-bevel design or worm design for reduction gearbox. Its motor can be horizontal or vertical. As for the shaft and impeller, compared with painting process, the galvanizing treatment is usually adopted to create a better anti-rust performance.

Derrick mud agitators include an explosion-proof, “C” faced motor, reduction gearbox (helical-bevel gears for horizontal agitators or all helical gears for vertical units), impeller, and shaft with assembly bushings. Motors range from 5 to 30 HP and may be supplied in several power configurations.

Attaching the motor directly to the gearbox protects correct alignment that can increase bearing life and provides 95 percent efficiency in power transfer to the impeller. Using this superior design surpasses standard worm drive gear assemblies by 30 percent, allowing Derrick agitators to do the same work at far less horsepower. By unitizing the motor and gearbox, weight and space requirements are reduced. Horsepower, mechanical configuration, impeller diameter, and shaft length are customized to tank dimensions and maximum mud weights. Available horsepower ratings* are: 5, 7.5, 10, 15, 20, 25, and 30.

Mud agitator is an important part of the drilling-fluid solids controling system. Drilling fluids agitatorcan be installed on drilling fluid tank, with the impeller submerged into certain depth under fluid surface to stir the fluid directly.During this process, the drilling fluid can be mixed even, and the solid particles are eliminated.In this way, it can improve solid phase dispersion, and increase the viscosity and gel strength, thus to make drilling fluid keep accordant with the requirement, provide needful fluid for drilling process, and ensure the smooth going of drilling work.Drilling mud agitator is the same as mud agitator.

TR solid control provide vertical and horizontal agitator. Horizontal mud agitator is divided into coupling type and direct type agitator. If you need a horizontal mud agitator, we recommend you use a direct type agitator. drilling mud Agitator is an ideal device for stirring, mixing liquid and preventing the solid-phase precipitation in the mixture.

Drilling Fluids Agitator in the mud system used to,mixing ratio and prevent to the mud tanked.TR solid control is an exporter of centrifugal pump . We are an exporter of drilling fluids mud agitator.Our factory approval the ISO9001,drilling agitator have the API certification.TR solids control is the designed,selling,production,service and delivery of Chinese mud agitator manufacturer. We will provide the high quality drilling fluids agitator and best service.Your best drilling mud tank agitators start from TR solids control.

When you need to gain rapid access to the essential wholesale drilling fluids mud agitator supplies that your business relies on, head to Alibaba.com where you"ll find thousands of Chinese wholesalers ready to provide the equipment, materials, consumables and products that you need to run your business. From drilling fluids mud agitator supplies that cover all technical specifications through to associated products and office consumables, you can buy everything that your business needs in one place at Alibaba.com.

Simply use the search filters and categories to swiftly find details of drilling fluids mud agitator prices, specifications, order volumes, lead times, discounting arrangements and more. See what other customers thought of individual wholesalers with the customer review feature and see images of operations, markets served and more. You can even chat instantly with sales and support or send an email at any time of day.

Ready to make your drilling fluids mud agitator order? Just do so in a few clicks in your private account area and you"ll receive regular updates on your shipment so that you know exactly where it"s at in the world until it arrives at your business! It"s swift, convenient and cost-effective to shop at Alibaba.com where you"ll find everything that your business needs to operate smoothly and without delay.

When you need to gain rapid access to the essential wholesale mud agitator supplies that your business relies on, head to Alibaba.com where you"ll find thousands of Chinese wholesalers ready to provide the equipment, materials, consumables and products that you need to run your business. From mud agitator supplies that cover all technical specifications through to associated products and office consumables, you can buy everything that your business needs in one place at Alibaba.com.

Simply use the search filters and categories to swiftly find details of mud agitator prices, specifications, order volumes, lead times, discounting arrangements and more. See what other customers thought of individual wholesalers with the customer review feature and see images of operations, markets served and more. You can even chat instantly with sales and support or send an email at any time of day.

Ready to make your mud agitator order? Just do so in a few clicks in your private account area and you"ll receive regular updates on your shipment so that you know exactly where it"s at in the world until it arrives at your business! It"s swift, convenient and cost-effective to shop at Alibaba.com where you"ll find everything that your business needs to operate smoothly and without delay.

Mud agitator is an important equipment of mud tank surface product whose function is prevent mud in the tank sediment. Because it locate on the surface tank, so there are many different models of mud agitators because of the different tanks depth and width.

Now, in DC Solid control warehouse, there are 60 sets vertical mud agitators, they are JBQ5.5, JBQ7.5, JBQ15 and ect. All with different shaft lenght accroding to users requirements.

The DCJBQ SeriesVertical Mechanical Agitator is ideal for installations with limited footprint availability. These double-reduction, in-line, helical gear agitators provide smooth, vibration-free operation and efficient mixing, just like the right-angle drive agitators.

DCJBQ series agitators align the motor shaft with the gear reducer output shaft. The explosion-proof, C-face motor bolts on and couples to the double reduction helical gearbox. The entire assembly bolts to a fabricated steel base plate, which is then mounted on the tank.

Vertically mounted agitators are lighter than right-angle-drive horizontal units, but produce the same mixing results. In some instances, horsepower requirements are reduced due to the 95% efficiency of the helical gearing. Above 7.5 kW mud agitator using turbine worm reduction drive, has the transmission torque, smooth operation, reliable work, etc advantages.

M-I SWACO became a Schlumberger company in 2010. Innovative drilling fluid engineers are at the company"s core, helping oil and gas operators increase efficiency and lower costs. We do this by developing drilling fluid systems and additives that accommodate a wide range of drilling environments and demanding applications—including HPHT, deep water and ultradeep water, shale gas, heavy oil, depleted wells, and more.

Specialized additives complement the efficiencies of our advanced drilling fluid systems by targeting performance-hindering downhole conditions, eliminating or minimizing the problems that drive up costs and threaten drilling programs. For example, we were the first to introduce cost-effective, high-efficiency micronized barite technology to water- and oil-based drilling fluids.

Our base fluids and additives are tailored for specific well construction applications. Custom formulation helps you maintain wellbore stability, optimize ROP, and increase overall drilling efficiency while reducing NPT and minimizing HSE footprint.

JBQ series mud Agitator, Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW.The drilling mud agitator is an important components for GN Solids Control drilling fluids processing system.

Mud Agitatoras an important soilds control equipment, always used to agitate the mud consecutively and reliably to keep both the mud uniformity and the suspension of solids. Thus the drilling cuttings silt and sand in the mud will not precipitate down to the mud tank bottom when passing the solids control system. Mud agitator is typically located vertically on the mud mixing tank and mud storage tank. It can get a much better performance if worked together with the mud gun. Due to the simplex turbine decelerator, this product is featured by compact construction, light weight, balanced transmission, low noise, high efficiency of transmission and strong agitating power. Therefore, it is a reliable product in the solids control system.

GearBox is a crucial part of mud agitators. Mud agitators are used in surface mud system to suspend solids and maintain homogeneous mixture throughout the system.

Mud agitator was one of solids control equipment and has two main type: verticle agitator and horizontal agitator. It is very important to select optimum gearboxes for various applications of drilling project or other mud treatment.

In the past, horizontal agitators mainly use worm gear unit for cost reason. But worm gear easy to broken and mantainance is difficult. you have to open shell to grease gear.  Now horizontal mud agitator use helical-bevel gears ( like derrick agitator ).  Helical gears have a smoother operation due to the angle twist creating instant contact with the gear teeth. Rigid tooth flank helical gear unit are advanced of helical gears.  Rigid tooth flank means more wear resistant and long life to use. So it’s trend to use rigid tooth flank gearbox.

Mud gun are meant to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center.

The mud agitators are high-efficiency mud-mixing units offered in a wide array of custom sizes and configurations to accommodate virtually any mud tank. Both horizontal and vertical drive configurations are available for all sizes of mud agitators. The horizontal drive is designed for installations having limited space above the mud tank.

The mud agitator stirs a mud slurry to maintain suspension of solids. The agitator is mounted on top of the mud tank and has one or two impeller(s) immersed in the mud slurry. The impeller shaft is directly coupled to an electric drive motor that is available in several horsepower ratings from 3 (50Hz only) to 30 (60Hz). Impellers are available in diameters ranging from 20″ to 52″ to meet the needs of various size mud tanks.

The mud agitator is operated by a 3-phase induction motor. Drive motors range from 5 to 30 horsepower for the 230/460Vac 60Hz power configuration and 3 to 25 horsepower for the 190/380 50Hz power configuration.

Though there are mud guns and mud agitator‘s, to activate the mud, there is certain portion in the mud tank which is not influenced by these activating devices. Hence this portion of mud tank is having in-activated mud. This in-activated mud promotes in settling of the chemicals at the bottom of the tank creating a differential chemical composition throughout the tank. This in-activated mud is carried to the drill string followed to the drill bit, where its functioning is severely affected. On observation, in mud tank there‘s a provision to run a horizontal shaft-blade assembly through the length of the tank. Such an arrangement at proper elevation can activate that portion of the tank which is generally a dead zone. This assembly runs horizontally along the length of the mud tank with three bearing supports at the partition. Each blade assembly consists of four blades and four such assemblies are located through out the length of the shaft.

On economic considerations, the amount of chemicals wasted due to this in-active mud is primarily calculated. The cost of chemicals wasted per tank for a location is amounting to around Rs.51,000/- (Rs. Fifty one thousand). If the drilling rig, works at least for a span of one year in five locations, the total cost of chemicals lost amounts to Rs.2,55,000/- (Rs. Two lakh fifty five thousand). To reduce this wastage of mud it is proposed in this paper to design a horizontal shaft-blade assembly

Mud with density 1668.1 kg/m3 is chosen in order to design the project for high mud weight. The Standard D.C Motor with speed reduction gear box used to mud-agitator is selected for calculation towards failure criterion.

Used for rapid and uniform incorporation of dry and liquid ingredients.Creates a deep vortex, exposing dry ingredients directly into the agitator blades. This is a standard agitator for bakery applications.Ideal for soluble, dry ingredients that want to float on the surface.

We are providing to our clients superior quality Mud Agitators. Our offered Mud Agitators are widely appreciated by our clients which are situated all round the nation. These Mud Agitators are used for agitating mud slurry for obtaining consistency through proper blending in flow controlled applications.

The Technostrength Mud Agitator combines compact design with high torque performance levels necessary for a uniformly suspended flow of drilled solids throughout the mud systems.

Powered by 1500RPM (4 pole) explosion proof motor and connected through heavy duty gear reducer, this agitator transfers high torque at RPM toread more...

Mud agitator, also called drilling mud agitator, used for drilling fluid agitation mix, prevent drilling fluid solid particles in the tank circulation system deposit, cycle drilling fluid performance stability, mixed evenly. Mud agitator composed by explosion-proof motor, reducer, engine base and impeller components four parts.read more...

Mud agitator, also called drilling mud agitator, used for drilling fluid agitation mix, prevent drilling fluid solid particles in the tank circulation system deposit, cycle drilling fluid performance stability, mixed evenly. Mud agitator composed by explosion-proof motor, reducer, engine base and impeller components four parts.read more...

- Lightweight, but sturdy construction with the highest torque rating in the industry. Example: 15 hp KOE Agitator weighs 246.4 kg compared to industry averageread more...

GAURAV ASSOCIATES manufacture the GAMA range of Mud Agitators. These Mud Agitators are used for agitating mud slurry for obtaining consistency through proper blending in flow controlled applications.

The mud agitator is a continuous and reliable drilling mud solids control system for maintaining the uniformity of the drilling fluid and suspending the solid particles. Mud agitator is mainly used for agitating and mixing of drilling fluids to prevent the solid particles of drilling fluid from being deposited in its tank circulation system, so that the performance of the circulating drilling fluid is stable and evenly mixed. Equipment structure: slurry mixer, mainly composed of explosion-proof motor, reducer, base and pulsator components, motor and reducer, reducer and wave wheel shaft are connected through rigid coupling. The pulsator is welded from four blades.

DC, mud agitator supplier, will talk about the working principle of mud agitator next: The mud agitator is suitable for the agitation of petroleum drilling fluid. The mud agitators use cycloid speed reducers below 5.5kW. The drilling fluid mud agitators above 7.5kW adopt a worm gear type deceleration transmission, and the pulsator can make the agitating liquid to generate vortex motion, thereby enhancing the stirring effect. The pallets sandwiched between the blades can also prevent solid particles of the slurry from depositing around the lower blades after shutting down. This reduces the resistance of the deposits to the blades during start-up, thus avoiding starting overload and burning the motor.