o drill mud agitator manufacturer

Derrick mud agitators include an explosion-proof, “C” faced motor, reduction gearbox (helical-bevel gears for horizontal agitators or all helical gears for vertical units), impeller, and shaft with assembly bushings. Motors range from 5 to 30 HP and may be supplied in several power configurations.

Attaching the motor directly to the gearbox protects correct alignment that can increase bearing life and provides 95 percent efficiency in power transfer to the impeller. Using this superior design surpasses standard worm drive gear assemblies by 30 percent, allowing Derrick agitators to do the same work at far less horsepower. By unitizing the motor and gearbox, weight and space requirements are reduced. Horsepower, mechanical configuration, impeller diameter, and shaft length are customized to tank dimensions and maximum mud weights. Available horsepower ratings* are: 5, 7.5, 10, 15, 20, 25, and 30.

JBQ series mud Agitator, Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW.The drilling mud agitator is an important components for GN Solids Control drilling fluids processing system.

GN Solids Control as a professional manufacturer for soilds control equipments, we have designed lots of high-quality products, and JBQ series Agitator is one of them. To keep both the mud uniformity and the suspension of solids, the mud agitator is used to agitate the mud consecutively and reliably.This agitator agitates the mud to make cuttings, silt and sand pass the solids control system without being precipitated onto the tank bottom. Due to the simplex turbine decelerator, this product is featured by compact construction, light weight, balanced transmission, low noise, high efficiency of transmission and strong agitating power. Therefore, it is a reliable product in the solids control system.

China manufacturer GN Solids Control offer the world with drilling mud agitator equipments.We are an exporter of drilling fluid mud agitator for Indian, Russian,middle east.etc..Our factory and company are Quality Management System ISO 9001-2000 certified.GN Solids Control operate international oil gas drilling mud separation system sales,service,manufacturing,distribution serivce.Buy drilling fluid mud agitatorfrom China manufacturer.Your best mud agitator for drilling mud circulation system.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Mud agitator is an important part of the drilling-fluid solids controling system. Drilling fluids agitatorcan be installed on drilling fluid tank, with the impeller submerged into certain depth under fluid surface to stir the fluid directly.During this process, the drilling fluid can be mixed even, and the solid particles are eliminated.In this way, it can improve solid phase dispersion, and increase the viscosity and gel strength, thus to make drilling fluid keep accordant with the requirement, provide needful fluid for drilling process, and ensure the smooth going of drilling work.Drilling mud agitator is the same as mud agitator.

TR solid control provide vertical and horizontal agitator. Horizontal mud agitator is divided into coupling type and direct type agitator. If you need a horizontal mud agitator, we recommend you use a direct type agitator. drilling mud Agitator is an ideal device for stirring, mixing liquid and preventing the solid-phase precipitation in the mixture.

Drilling Fluids Agitator in the mud system used to,mixing ratio and prevent to the mud tanked.TR solid control is an exporter of centrifugal pump . We are an exporter of drilling fluids mud agitator.Our factory approval the ISO9001,drilling agitator have the API certification.TR solids control is the designed,selling,production,service and delivery of Chinese mud agitator manufacturer. We will provide the high quality drilling fluids agitator and best service.Your best drilling mud tank agitators start from TR solids control.

Mud Agitator is also called Mud Tank Agitator and widely used in the mud solids control system. It is installated in slurry storage tanks or mud tank and to prevent drilling fluid solid Particles deposited in the mud tank. Brightway is the famous and professional Mud Agitator Manufacturer and can produce the horizontal Mud Agitator and vertical Mud agitator.

Mud Agitator is used in mud systems to suspend solids and maintain homogeneous mixture throughout the system. A mechanical agitator is driven by an explosion-proof motor,coupled to a gear box that drives the impeller shaft. The impellers (turbines) transform mechanical power into fluid circulation or agitation. The objective is to obtain a uniform suspension of all solids.

Brightway mud agitator features a “C” face motor couple to a rugged oilfield gearbox, which eliminates misalignment and troublesome couplings. This configuration promotes long motor and gearbox bearing life. Please contact with Brightway representative with your tank dimension and your detail requirement. We will recommend the right model with specification about the horsepower, impeller (size, type& quality), and shaft length etc to meet your requirement.

As Mud Agitator Manufacturer, Brightway can supply BWJBQ 5.5-22kw Mud Agitator for mud tank and mud system. including: Horizontal Mud Agitator or Vertical Mud Agitator. Brightway mud agitator can be customized once we get the detailed requirements. Buying mud agitator from Brightway will be your best choice for drilling mud circulation system.

1. Brightway mud agitator equips with a motor couple to a rugged oilfield gearbox, which can eliminates troublesome couplings, misalignment and have a longer bearing life. And it is driven by the explosion-proof motor, coupled to a gearbox which will drive the impeller shaft. Due to the simplex turbine structure of shaft,

2. Brightway mud agitator is featured by compact construction, light weight, balanced transmission, small footprint, low noise and high efficiency. And its impeller turbines can transform the mechanical power into drilling fluid agitation as well as circulation.

3. Brightway mud agitator can be designed per customer’s requirement to choose the helical-bevel design or worm design for reduction gearbox. Its motor can be horizontal or vertical. As for the shaft and impeller, compared with painting process, the galvanizing treatment is usually adopted to create a better anti-rust performance.

Dragon pump accessories are constructed to handle the harsh oilfield environment. Dragon stands ready to support our drilling and oilfield customers with the highest quality equipment in the industry. And, as always, Dragon backs every product it manufactures with the support you need.

That support includes 24/7 access to our skilled service teams and vast parts inventory. We are always here for you, because we know you do not want downtime. You want quality, dependability and the support of a long-standing oilfield equipment expert backing you up.

Our agitators feature the new dracomet coated corrosion resistant keyless coupling for easy installation and impeller adjustment. The units come complete with base plate, motor, gearbox, impeller, shaft & couplings.

KOSUN MA series mud agitator is part of the drilling fluids solids control equipment, which is mainly used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fluids.

It is composed of explosion-proof motor, speed reducer, motor base and blade. The motor and speed reducer, speed reducer and impeller shaft are connected by steel coupling. The impeller is welded with four blades.

Tags:mud agitator,agitator,hydraulic mud agitator,oilfield mud agitator,drilling mud agitator,oilfield drilling mud agitator,mud agitator for mud tank,Tank Mixers Agitators,mud pit agitator, api mud agitator, horizontal mud agitator, agitator mud system.

A Mud Agitator is used in surface mud systems to suspend solids and maintain homogeneous mixture throughout the system. A mechanical agitator is driven by an explosion-proof motor, coupled to a gear box that drives the impeller shaft. The impellers (turbines) transform mechanical power into fluid circulation or agitation of drilling fluid mud agitator. The objective is to obtain a uniform suspension of all solids.

Descriptions of Mud Agitator1. Mud agitator is an equipment to mix solid and fluid, mainly used in oil and gas drilling mud process, mineral working site, etc. mud system.

2. This type agitator holding simple structure, large bearing strength, low noise, more durable. It prevent solid sediment and maintain drilling fluid property. Features 1.Typical C face motor installation 2.Small footprint without skid

3.Helical-Bevel gearbox 4.Motor can be horizontal or vertical Benefits 1.Longer usable life on motor and gear box 2.Require less space also easy to handle 3.High efficiency, low noise, low operating temperature

Mud Agitator, Drilling Solids Control,Mud Cleaning Agitator, mud agitator manufacturer Exporters, mud agitator manufacturer Suppliers, mud agitator manufacturer wholesalers, mud agitator manufacturer distributors, mud agitator manufacturer Manufacturers, mud agitator manufacturer sellers, mud agitator manufacturer

We offer best range of Mud Agitator which works continuously at the drilling site by delivering optimum results. Our Principles has made us to supply our highly technological equipment to the power plants which are present in abroad.

Technostrength FLP Motors range from 5HP to 30HP and can be used with various power configurations. Gear reducers are worm type or helical bevel type depending on the choice of the user. For Achieving Highest Performance in various mud conditions we offer 3 to 6 blade designs, mixed and axial flow turbine types, canted, bolted and twisted profile types also. For all these equipment Mud Agitator Manufacturer in India like Technostrength is occupying the best place in the industry.

Solid Control Mud Agitators act as mud mixers on mud tank. On a usual process these agitators should rotate at 60-70 rpm. Our high performance equipment is appreciated among clients all over India. If there is a large quantity of mud present in the site then large torque mud agitator will be required.

We suggest the customers to choose the mud agitator according to the size of tank along with torque level. Mud Agitator Manufacturer in Hyderabad is the name suggested to our services by all our previous customers.

DC mud agitator is used for the mixing and agitation of drilling fluid, preventing the settlement of solid phase particles in the tank recycling system.

（2） Customers can choose single layer or double layers impellers according to site conditions.Agitator shaft centering guide can be added according to the increase of tank depth.

JBQ series mud Agitator, Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission, the revolution is steady,it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW ,JBQ7.5kW ,JBQ11kW and JBQ15kW.The drilling mud agitator is an important components for ZS Solids Control drilling fluids processing system

China manufacturer ZS Solids Control offer the world with drilling mud agitator equipments.We are an exporter of drilling fluid mud agitator for Indian, Russian,middle east.etc..Our factory and company are Quality Management System ISO 9001-2000 certified.ZS Solids Control operate international oil gas drilling mud separation system sales,service,manufacturing,distribution serivce.Buy drilling fluid mud agitatorfrom China manufacturer.Your best mud agitator for drilling mud circulation system.

Raval Pada, Dahisar (E), Mumbai Gala No A-13 Chintypada, Bidco Road Oswal Industrial Estate Palghar Palghar Maharashtra, Raval Pada, Dahisar (E), Mumbai - 401404, Dist. Mumbai, Maharashtra

Used for rapid and uniform incorporation of dry and liquid ingredients.Creates a deep vortex, exposing dry ingredients directly into the agitator blades. This is a standard agitator for bakery applications.Ideal for soluble, dry ingredients that want to float on the surface.

Mud agitator, also called drilling mud agitator, used for drilling fluid agitation mix, prevent drilling fluid solid particles in the tank circulation system deposit, cycle drilling fluid performance stability, mixed evenly. Mud agitator composed by explosion-proof motor, reducer, engine base and impeller components four parts.read more...

Mud agitator, also called drilling mud agitator, used for drilling fluid agitation mix, prevent drilling fluid solid particles in the tank circulation system deposit, cycle drilling fluid performance stability, mixed evenly. Mud agitator composed by explosion-proof motor, reducer, engine base and impeller components four parts.read more...

Arekere Mico Layout, Banner, Bengaluru CORPORATE OFFICE #9, Naik Business House, 1st Main, Brindavan extension, Arekere Mico Layout, Banner, Bengaluru - 560076, Dist. Bengaluru, Karnataka

We are providing to our clients superior quality Mud Agitators. Our offered Mud Agitators are widely appreciated by our clients which are situated all round the nation. These Mud Agitators are used for agitating mud slurry for obtaining consistency through proper blending in flow controlled applications.

GAURAV ASSOCIATES manufacture the GAMA range of Mud Agitators. These Mud Agitators are used for agitating mud slurry for obtaining consistency through proper blending in flow controlled applications.

Sector 60, Noida, Dist. Gautam Budh Nagar B 49, Sector 60 , Noida ,Uttar Pradesh,201301 South Delhi, Sector 60, Noida - 201301, Dist. Gautam Budh Nagar, Uttar Pradesh

- Lightweight, but sturdy construction with the highest torque rating in the industry. Example: 15 hp KOE Agitator weighs 246.4 kg compared to industry averageread more...

The Technostrength Mud Agitator combines compact design with high torque performance levels necessary for a uniformly suspended flow of drilled solids throughout the mud systems.

Powered by 1500RPM (4 pole) explosion proof motor and connected through heavy duty gear reducer, this agitator transfers high torque at RPM toread more...

Impeller sizes are determined by calculating the TOR (sometimes called the time of rollover) for each compartment. This is the time, in seconds, required to completely move the fluid in a compartment (Table 10.1) and can be calculated by knowing the tank volume and impeller displacement:

For flat and canted impeller applications, TOR should range between 40 and 85 seconds. As the TOR approaches 40 seconds, the chance for vortex formation and possible air entrainment increases. At values greater than 85 seconds, the proper suspension may be jeopardized and solids will begin to settle.

For contour impeller applications, values must be significantly faster (i.e., smaller numbers) to achieve the same results, but because of the impeller design, air entrainment is less probable. In symmetrical compartments, the fluid has a nearly equal distance to travel from the center of the impeller shaft or from the impeller blade tip before it contacts the vessel wall. Agitators should be placed where the shaft is centered in the tank or compartment.

When defining the area in which to mix, it is best to work with symmetrical shapes like squares or circles (as viewed in a plan drawing or overhead view of the tank layout). Rectangular tanks should be converted to nearly square compartments if possible. Maximum fluid working volumes in compartments should not be higher than 1 foot (about 3⁄10 m) from the top of the tank. This will allow for a little extra capacity in emergencies, slightly out of level installations, and/or fluid movement on floating rigs.

Working volume for square or rectangular tanks is calculated by knowing dimensional values for length (L), width (W), and height (H; in feet for gallons, in meters for liters):

For round tanks with dish or cone bottoms, calculations for working fluid volume are based on straight wall height (i.e., this height is measured from the tank top to where the tank joins the cone or dish at the bottom). This leaves adequate free space above the maximum fluid operating level. In all cases, if H<5 feet (1.5 m), a radial flow impeller should be specified.

We present to you a line of very efficient and highly productive Agitators that are used in various industries. We make use of a variety of the choicest materials like steel, stainless steel, hastelloy and titanium in the manufacture of these agitators. We offer this type in technical specifications as per your requirements.

Adinath designs and manufactures assorted types of Anchor Type Agitators and also customized turbines in accordance with the requirements of the process. The height and the sweep diameter of the turbine are carefully ascertained for competent dispersion of the reactants and homogenous mass. The Agitators are dynamically balanced to guarantee weight balance at high rpm, thereby increasing the agitator and motor life. These types of Agitators are used if dispersion is required at high rpm.

Along with the ability for Design and Fabrication of Agitator For Process Vessels, we offer complete mixing agitators, chemical agitators, mixers, blenders, reactors with shortest deliveries for trouble free lifelong operations

For the PSV´s carrying drilling mud to the oil platforms it is important to keep the mud homogeneous, otherwise there will be severe sedimentation. The drilling mud is expensive itself and a delay in time, waiting for the drilling mud to be mixed is even more expensive.

Hassle free operation and ease of maintenance of the agitator is an important factor in the operators ability to supply the platforms without costly delays.