allweiler mud pump manufacturer

The oldest German pump manufacturer, founded in 1860, Allweiler GmbH is today the European market and technology leader in fluid handling solutions for shipbuilding, power generation and special industrial applications. Our product portfolio is unrivaled in the industry and includes centrifugal, propeller, screw spindle and progressive cavity pumps, as well as complete pump systems. We also manufacture peristaltic pumps and macerators. In addition to our Allweiler-branded pumps and systems, we sell the pumps and solutions of our sister company Zenith - gear pumps.

We’ve built our success on putting our customers’ needs as the top priority in the development of every individual Allweiler product. Our customers benefit from a deep knowledge of pump technologies and expertise in fluid handling applications that has grown over generations. They know our pumps are precisely manufactured to address specific applications areas and trust the quality and reliability of Allweiler pump performance. We back our pumps with expert, personal, onsite and comprehensive services.

ALLWEILER has a complete line of products that provides its customers with the safest and most efficient solutions for all typesof applications. The product line includes Two and Three-SpindleScrew Pumps,Centrifugal Pumps, Propeller Pumps, ProgressingCavity Pumps,Peristaltic Pumps and Macerators. The pump seriesincludesvertical pumps, block units, pumps with magnet drive,immersedpumps, pumps for very thick liquids as well as pumped solidsandmulti-stage pumps for high pump heads. ALLWEILER pumps canbe used individually or installed in a series.

As a member from CIRCOR, ALLWEILER is represented by subsidiaries in many European countries, the United States, China, India, Egypt and South Africa. Around the world, the company has approximately 100 subsidiaries and partner companies.

Whether you need qualified advice before a purchase, technical support during start-up or help with maintenance tasks – you can be sure that an ALLWEILER partner will be on-site and ready to help.

(Radolfzell) Allweiler will deliver 20 pumps to the CSPC Nanhai Petrochemicals complex in southern China ...November 10, 2004New impeller developed and tested in four weeks

Allweiler recently found it necessary to increase the performance of a cooling water pump by 20 percent within a short period of time in order to meet the significantly elevated performance of the �8000� MTU diesel motor ....March 30, 2005Allweiler produces its own stators

Since mid-March 2005, Allweiler AG has been producing all of the stators for its progressing cavity pumps at its own plant. Allweiler acquired this capability by taking over parts of the company New-York Hamburger Gummi-Waaren Compagnie AG. With its own stator production, it can make sure that even uncommon elastomers and dimensions will be available quickly and in original quality.April 25, 2005IFAT Press FolderApril 26, 2005Flygt taking over Allweiler distribution in Australia

Effective January 1, ITT Flygt has taken over the distribution of Allweiler�s progressing cavity pumps, peristaltic pumps, rotary lobe pumps, and macerators in the Australian market. This Swedish pump manufacturer is already selling Allweiler AG wastewater pumps under a private label in several non-European countries.May 9, 2005Redesigned lube-oil pump for vertical installation & Anti-heeling Pump at Nor-shipping

Allweiler AG, Radolfzell/Germany, (booth D03-02) introduces their new main-engine lube oil pump in two stage design. ALLMARINE MELO is an extremely efficient, robust, and reliable centrifugal pump. Also for the first time presented at the Nor-shipping trade fair is ALLTRIMM with increased capacity. ALLTRIMM is a new anti-heeling in-line propeller pump with unique technology.May 23, 2005New Chairman at Allweiler AG

The Executive Board positions at Allweiler AG were rearranged in mid-March 2005. Klaus Stahlmann is now the CEO and Chairman of the Executive Board and Frank Kirchner is the CFO and Member of the Executive Board. Campbell Walton is no longer a member of the company"s Executive Board.June 13, 2005Allweiler delivers its largest propeller pump to Russia

Uralkali, Russia"s leading chemical company, ordered from Allweiler AG the largest propeller pumps that the company has ever produced. The seven pumps move potash salt-suspension needed in the production of fertilizer.June 16, 2005Allweiler: After a successful 2004 new hiring and a good start in 2005

(Radolfzell/Germany) With sales virtually unchanged, Allweiler AG closed the year 2004 with a significantly higher level of incoming orders and an order backlog. During the first five months of 2005, the company bucked the general trend with incoming orders that were 10 percent higher than the previous year and 15 percent higher than projected. As a result, Allweiler plans to add ten new employees this year.July 1, 2005Allweiler to hold specialty trade fair for pumps in Power Generation

(Radolfzell/Germany) On September 16, Allweiler AG will host a specialty trade fair at their Radolfzell headquarters in southern Germany. The exhibits and presentations will focus on applications for pumps and ready-to-use components in power plants. The event is aimed especially at power plant builders, suppliers of power plant components, planners, and operators in Germany and other countries. The company expects as many as 400 visitors.August 5, 2005Allweiler Invests in New Stator Production Site

(Radolfzell/Bottrop) Since mid-March 2005, ALLWEILER AG has been producing all stators for its progressing cavity pumps at its own plant. Allweiler acquired this capability by taking over parts of the company New-York Hamburger Gummi-Waaren Compagnie AG. They then modernized the existing facilities to make them more environmentally friendly and energy.August 9, 2005Focusing on Heat-Transfer Pumps

in Karlsruhe, Germany. The company plans to exhibit with a large booth in hall 1A (booth B040), where it will display its �ALLHEAT� product family, related products for thermal oils and hot water, and demonstrate representative applications from several different industries.September 26, 2005Allweiler In-House Exhibition is a Success

(Radolfzell/Germany) On September 16, Allweiler AG in Radolfzell, Germany held an in-house exhibition that focused on pumps and complete components for power plants and power generation. Nearly 150 visitors from Germany and other countries took the opportunity to take a look behind the scenes at Allweiler and hold in-depth discussions with specialists from the design, production, service and sales departments.October 12, 2005New Sand Mixer Installed

(Radolfzell/Germany) On October 7, ALLWEILER AG installed a new sand mixer at its Radolfzell, Germany foundry. The new machine is just one aspect of a comprehensive effort to modernize the foundry. In total, ALLWEILER will invest 650,000 euro in modernization this year.November 7, 2005Colfax and Allweiler Making Progress in Chinese and Indian Markets

(Radolfzell/Germany) Allweiler AG has been producing pump parts at its own factory in Wuxi, China since the beginning of October. Starting in 2006, this plant will manufacture complete

(Radolfzell/Germany) Allweiler AG has increased the quality of their priming coats while at the same time reducing consumption of conventional solvents. By switching to water-soluble

screw pump based on its proven, eight-year-old EMTEC series. The new pump is designed specifically for moving emulsions and cooling lubricants, but extra-hard special steel and cast iron ensure safety and a high level of wear resistance even when pumping liquids that contain abrasives.May 31, 2006Allweiler AG gets new director in Radolfzell

(Radolfzell/Germany) On April 1, Dr. Michael Matros assumed leadership of Allweiler AG�s main plant in Radolfzell, putting him in charge of the company�s entire screw-pump and centrifugal-pump business segment.June 14, 2006Allweiler strengthens Bottrop location

(Radolfzell/Bottrop) On May 1, 2006 Dr. Ernst Raphael assumed leadership of Allweiler�s Bottrop plant. As a member of the company�s executive management, he simultaneously assumes responsibility for the progressing cavity and peristaltic pump business division. He will also continue to manage sales in Europe, the Middle East, and Africa.June 28, 2006New progressing cavity pump from Allweiler

(Radolfzell/Bottrop) Allweiler AG�s new progressing cavity pump is designed to meet the specific needs of beverage manufacturers, handlers, and bottlers. Pumps of the �AEB-SE� series are suitable for all liquids, comply with food regulations, and come delivered as a complete unit including drive. The pump can move beverages and juices in addition to paints, varnishes, pastes, and chemicals.June 14, 2006Anti-heeling pump now with higher performance

applications for its ALLTRIMM anti-heeling pump. The improved pump has the same dimensions but maximum flow rate is one-third higher at 1300 m3/hour. It is also available in an explosion-protected version. The pump is especially well suited for use in container ships, cruise ships, and roll-on/roll-off vessels.July 11, 2006New lubricating, anti-heeling and fire extinguishing pumps from Allweiler

(Radolfzell/Germany) Allweiler AG, the oldest German pump manufacturer, will present three new pumps at this year"s SMM in Hamburg (Hall A2, Stand 172). These include a lubricating

centrifugal pump for diesel engines with a large lubricating oil requirement, a high-performance anti-heeling trimming pump and a newly developed fire extinguishing pump.August 5, 2006Using pumps economically

(Radolfzell/Germany) Allweiler AG is organising a pump convention at its company premises on 12th October in Radolfzell on Lake Constance. The theme is the economical use of pumps and reducing the Total Cost of Ownership (TCO). The event is intended exclusively for business visitors. Prior registration is required.August 18, 2006Allweiler: A successful 2005 and clear growth in the first half of 2006

comparison with the previous year. As in 2005, further new positions are planned in all branches in 2006.September 1, 2006Allweiler supplies heaviest lubricating modules for Hitachi

(Radolfzell) In mid-November 2006 Dr. Michael Matros (41) became a member of the Executive Board of Allweiler AG, and Senior Vice-President and General Manager of parent company Colfax

major order with Allweiler AG for twenty stainless-steel centrifugal pumps that will be used to move soy oil. The customer placed its initial order because Allweiler was able to immediately meet all technical specifications as well as the additional requirements of the plant operator.April 5, 2007Colfax Corporation Announces Acquisition of Lubrication

Richmond, VA, USA, January 31, 2007. Colfax Corporation announced today it has completed its acquisition of Lubrication Systems Company (LSC) in Houston, Texas from shareholders of LSC. Terms of the transaction were not disclosed.August 2, 2007Another major investment at Allweiler AG

(Radolfzell/Germany) In June 2007, Allweiler AG updated its in-house foundry by adding a new molding machine. The new equipment is increasing quality and productivity at the foundry. For Allweiler, the foundry is a major element of its value-added chain and essential for fulfilling promises of high quality and short delivery times even as the number of orders climbs.October 22, 2007New high-performance pump for heat transfer liquids

(Radolfzell) At WTT Expo, a trade fair for heat exchangers and heat-transfer technology, Allweiler AG will introduce its new "ALLHEAT 1000", a specially-designed centrifugal pump for moving thermal oils. The new pump"s maximum delivery head is 100 m and maximum capacity is 1450 m3/h. The new pump expands the performance range of the "ALLHEAT" product family for a variety of heat transfer liquids like oils, water, glycol, and fused salt baths.October 29, 2007Large orders for Allweiler pump skids

(Radolfzell/Germany) In September 2007, the Pump Skid business segment of Allweiler AG received large orders from several global customers. Total value of the orders is in the double-digit million range. Allweiler AG of Germany manufactures ready-to-use fuel and lubricating-oil skids for gas and steam turbines in power plants. Its largest customer is Siemens AG.December 14, 2008Allweiler delivers its largest lube-oil module to Finnish power plant

(Radolfzell/Germany) The Pump Skid business segment of Allweiler AG was chosen to deliver the entire lubrication-oil module for Finland�s Olkiluoto 3, the world�s largest power plant. Four Allweiler centrifugal pumps will handle pumping of lubrication oil. The lubrication oil tank holds 123 m3. It is the largest unit of this type that Allweiler has ever delivered. Planning for the system began in 2004. The power plant will generate 1600 MW and is expected to go on-line in 2010.January 30, 2008Immersed lube-oil pump with higher power

(Radolfzell/Germany) Allweiler AG has expanded the performance range of its ALLUB� RUV vertically immersed screw pump. Maximum capacity has been boosted to 1300 l/min. or more than 30-percent higher than before. The pump/motor assembly is delivered complete with covering plate and pipework, making it ready for installation in an oil reservoir.May 28, 2008German pump technology for sewage plants in Algeria

(Radolfzell/Bottrop) Construction of four new sewage plants is currently underway in Algeria and pumps from Allweiler AG are playing key roles. Allweiler worked with the plant builder to deliver 48 progressing cavity pumps and macerators. Technological benefits of Allweiler pumps and the company"s on-site presence were two big reasons why Allweiler was awarded the contract.June 11, 2008Promotional event: Try pumps with no obligation

(Radolfzell/Bottrop) Companies with demanding pumping tasks can now try progressing cavity pumps and peristaltic pumps from Allweiler AG at no obligation. By making this offer, Allweiler intends to demonstrate to potential customers how they can benefit from using these pumps under difficult conditions. This event will continue until the end of 2008.February 17, 2009Allweiler Pumps Approved for Explosive Atmospheres. New ATEX Certificate for Dust.

For many years progressing cavity pumps, peristaltic pumps, and macerators manufactured by Allweiler AG have fulfilled the requirements for use in potentially explosive gaseous atmospheres when used properly. But now � since end 2008 � they are also certified for use in dust-laden explosive atmospheres.March 23, 2009Allweiler at Achema: Pumps at the heart of every system

At this year�s Achema, Allweiler AG will employ an informative multimedia exhibition concept to introduce a new generation of intelligent pumps (Hall 8, Booth R17/19). Specific smart technologies are designed to eliminate problems associated with leaks, overheated bearings, and defective seals, thereby resolving complex sets of challenges faced by Allweiler�s customers.April 6, 2009Allweiler pumps now with "life insurance"

Allweiler AG now offers additional protection for the longevity of its pumps: �Allready Box�, a new electronic module that continuously monitors a pump�s operational state. In the event of operational deviations or disturbances, Allready immediately emits a warning. In urgent cases it triggers an alarm and even has the ability to switch the pump off in hazardous conditions and switch over to a secondary unit.April 16, 2009Safe and Clean: Allweiler Pumps with Allseal

Screw pumps made by Allweiler AG are now available with a new opto-electronic module. Known as "Allseal�, this new product detects wear of the mechanical seal as soon as it begins and immediately warns the operator of any leaks. The pump can then be automatically switched off and pumping tasks switched over to a secondary unit.April 29, 2009Allweiler"s Bottrop plant turns 50

In 2009 Allweiler AG�s plant in Bottrop, Germany will celebrate its 50th birthday. This plant specializes in manufacturing progressing cavity pumps and peristaltic pumps. Throughout the year of celebrations, Allweiler plans to launch an explosion of ideas, products, innovative services, and consulting options. The Achema trade fair in Frankfurt (hall 8.0, booth R17) will be the first opportunity for Allweiler customers to evaluate the new offerings.April 30, 2009Allweiler pumps for environmental compatibility and a clean engine room

Allweiler will present innovative pump sealing technology at the Norshipping trade fair (stand C02-12). Screw pumps made by Allweiler AG are now available with a new opto-electronic module for clean and secure operation. Known as "ALLSEAL�, this intelligent technology provides safety against uncontrolled leaks and detects wear of the mechanical seal as soon as it begins. The result is an economical alternative to hermetically sealed magnetic couplings.July 3, 2009Colfax Subsidiary Opens Middle East Office in Bahrain

Global positive displacement pump manufacturer will provide engineering and technical expertise to customers in region, including world�s largest oil companies. Allweiler AG, a subsidiary of Colfax Corporation (NYSE: CFX), a global leader in fluid-handling solutions for critical applications, has opened an office in Bahrain to better serve and support Middle East clients.July 13, 2009Econo-pack for ALLWEILER customers

Allweiler AG has begun offering its customers original spare parts kits for all standard pumps. They contain all of the parts that must be replaced on a regular basis during standard maintenance and which have similar usage cycles. The packages are designed to save the customer money by providing immediate access to all of the parts needed to completely finish repairs and maintenance.July 28, 2009Customizable Progressing Cavity Pumps

The new ACNBP-Flex and ANCP-Flex series of progressing cavity pumps from Allweiler AG exhibit modular designs that allow them to adapt quickly to a variety of pumping tasks. New production methods and materials also make them cost effective.September 3, 2009Allweiler introduces new �Allfuel� series of pumps for lubricating liquids

Allweiler AG, a business unit of Colfax Corporation, has been delivering its new �Allfuel� series of screw pumps to customers since May. The new series is designed to move oils and other lubricating liquids with a maximum discharge pressure of 40 bar. Allfuel pumps are available in six different construction types, allowing them to adapt to a variety of pumping tasks and installations. Special Allfuel material combinations comply with the most recent regulations requiring ships.September 16, 2009Allweiler establishes new global service centers for high-pressure pumps

Allweiler�s new global service centers for its Emtec series of pumps will enable the company to more efficiently serve tool-machine customers around the world. These high-pressure pumps are used primarily to move critical cooling lubricants in tool machines. Service centers in Europe, the United States, and Asia will provide Allweiler customers with on-site advisory and maintenance services plus emergency service and rapid spare parts delivery. Allweiler is subsidiary of Colfax Corp.October 8, 2009Allweiler wins major order for Irish power plant

In March 2009, Allweiler AG, a subsidiary of Colfax Corporation supplied an Irish customer with ten pumps for moving oily water. The order was closed in cooperation with Allweiler�s Swiss partner schubag. The pumps are used in a gas/steam combined-cycle power station constructed in Aghada, Ireland by Swiss firm Alstom AG. The client is state-owned power company ESB Power Generation. The order is valued at over 200,000 �.November 7, 2009Allweiler Pumps Detect and Prevent Leaks on Ships

In response to elevated safety and environmental regulations on ships, Allweiler AG, a Colfax business unit, has begun equipping its "SNS" series of screw pumps with the optional "Allseal" intelligent leak-detection and -collection system. These pumps are used primarily to move diesel fuel and lubrication oils on ships.April 21, 2010Colfax Names Arne Forslund Vice President of Europe, Middle East, Africa and Asia

Colfax Corporation (NYSE:CFX) today announced that Arne Forslund has been promoted to the newly created position of Senior Vice President Europe, Middle East, Africa and Asia effective immediately. In this position he will also be CEO of Allweiler AG. Furthermore he will be responsible for the Company"s global commercial marine strategy. Dr. Michael Matros, Senior Vice President and CEO of Allweiler AG has resigned. Frank Kirchner will still be CFO and member of the Executive Board at Allweiler.June 15, 2010Allweiler pumps are ready for low-sulfur diesel in ships

Allweiler AG, a member of Colfax Corporation, is already delivering fuel pumps that are adapted for use with new low-sulfur diesel oil. The company employs an analytical program that shows conversion options or suitable replacements for pumps that are already in service. National and international regulations now require low-sulfur fuels, especially in coastal areas and while ships are in port.August 18, 2010Allweiler is looking for its oldest pump

Allweiler AG, a Colfax company, has been manufacturing pumps in Germany for 150 years, making it the country"s oldest pump manufacturer. To celebrate, Allweiler is looking for the three oldest Allweiler pumps still in service anywhere in the world. Submissions will be accepted until the end of December 2010 and the operators will receive a modern replacement pump at no charge.August 30, 2010Alldur stators from Allweiler have up to triple service life

Allweiler AG, a member of Colfax Corporation, will present a new stator material at the IFAT trade fair in Munich (September 13 to 17). "Alldur" was specially developed for use in sewage treatment plants and for pumping abrasive wastewater. The elastomer"s new chemical composition and Allweiler"s processing methods increase service life by up to three times. "Alldur" stators are now available in all of the company"s progressing cavity pumps.September 1, 2010Allweiler Anniversary Editions

Allweiler AG, a Colfax business unit, has been manufacturing pumps in Germany for 150 years, making it the country"s oldest pump manufacturer. In celebration of this milestone, Allweiler is offering its customers four exclusive anniversary editions: a leakage monitoring system for screw pumps, dry-running protection for progressing cavity pumps, complete replacement pumps with motors, and free on-site pump inspections.September 7, 2010Lower operating costs by 75% without additional investment

Allweiler AG, a Colfax Corp. company, has developed a new system for regulating the speed of its screw pumps. "Allspeed" is a control system that forgoes the use of valves. It enables use of smaller pumps with a smaller motor. Standard cage rotor motors may be used without external ventilation. Allspeed augments the Emtec series, which is designed specifically for pumping coolants in tool machines.September 21, 2010Allweiler awarded �5-million order for Iraqi power plants

Allweiler AG, a Colfax business unit, will deliver fuel-injection skids through Siemens AG for use in gas turbines in Iraq. The first two systems will be completed in early 2011. The Iraqi Ministry of Electricity has ordered an additional five skids and has options to purchase three more. All of the systems have the special ability to switch between several different liquid fuels without shutting down the turbines.October 28, 2010Allweiler Turns 150 � Earning Leadership One Customer at a Time

Allweiler AG, a Colfax business unit, is Germany"s oldest pump manufacturer. Year 2010 marks 150 years that Allweiler has been manufacturing pumps. The company celebrated its anniversary on September 25 with a reception and an open house day for employees and their family members. Approximately 1800 visitors took advantage of this opportunity.November 11, 2010Allweiler Delivers Propeller Pumps Worth �1.9 Million to Chinese Customer

Allweiler AG, a Colfax Corporation business unit, has received a major order for pipe-bend propeller pumps from a Chinese customer. The eight pumps will be used for salt production and were scheduled for delivery in October of 2010. A follow-on order for another �0.5-million has already been awarded. Allweiler"s products were selected primarily because they are well-adapted to operating conditions encountered during salt production.December 3, 2010Allweiler Delivers Chemical Pumps Worth �1.7 Million to Chinese Customer

In October 2010, Allweiler AG fulfilled a large order for centrifugal pumps in China. The PET, glycol, and thermal oil pumps are part of expanded polyester production in Wujiang. A large number of Allweiler pumps have been in operation at the site since 2003. Allweiler AG is a business unit of Colfax Corporation.July 1, 2011Allmind� Intelligent Pump Monitoring and Control

Allweiler AG, a member of Colfax Corporation, is introducing the Allmind� system, a new "Smart Platform" for Allweiler pumps. The Allmind system facilitates intelligent monitoring and highly efficient control of virtually any pump. Continuous diagnosis of the pump complements the capabilities of the Allmind system. The results are dramatically lower maintenance and energy costs, elevated safety, and optimized control when bringing the pump to the desired operating point.September 12, 2011Colfax Offers New Allheat� Pump Series for High Temperature, High Pressure Needs With Uncooled Mechanical Seal

MONROE, NC � Colfax Corporation (NYSE: CFX), a global leader in fluid-handling solutions for critical applications, announces through its business platform Colfax Fluid Handling the introduction of its new Allweiler Allheat� series of heat transfer pumps. Allheat pumps are capable of pumping synthetic oils at temperatures up to 400�C and design pressures up to 40 bar (PN 40), yet the design requires no mechanical seal cooling.January 24, 2012Colfax Fluid Handling Announces All-Optiflow� Progressing Cavity Pumps, Increasing Flow Potential

Colfax Fluid Handling has introduced the Allweiler All-Optiflow� series of progressing cavity pumps. Applications include waste, wastewater treatment and paper manufacturing. All-Optiflow progressing cavity pumps offer up to twice the flow of standard pumps for applications up to 6 bar (87 psi) and move virtually any type of liquid, including fibrous and solid materials efficiently and reliably.March 14, 2012Allweiler to exhibit All-Optiflow and Alldur at IFAT

Allweiler GmbH will exhibit its new All-Optiflow pump series at the IFAT 2012 trade fair in Munich, Germany. These new progressing cavity pumps are designed for use in waste handling, wastewater treatment, and paper manufacturing, among other applications. In addition to the All-Optiflow pumps, Allweiler will also focus on Alldur stators at the trade fair. Alldur is a new, highly wear resistant stator material that is ideal for use in sewage treatment plants.May 11, 2012Allmind and All-Optiflow will highlight Achema 2012

Colfax Fluid Handling will exhibit new products Allmind (pat. pending) and All-Optiflow (proprietary) at the Achema trade fair in Frankfurt, Germany (June 18 to 22). Both products are designed to help drastically reduce operating, maintenance, and energy costs for the operator. Visitors to Booth D63 in Hall 8, can see for themselves the potential for savings with the new Allmind Smart Platform.July 27, 2012Allmind pump upgrade reducing cost will highlight SMM

Colfax Fluid Handling will exhibit new enhanced product Allmind (pat. pending) at the SMM trade fair in Hamburg, Germany (September 5 to 7; booth 213, hall A2). Colfax�s Allmind pump upgrade reduces total cost of ownership through diagnostic capability and variable speed drive control.September 19, 2012Major order for All-Optiflow progressing cavity pumps

Colfax Fluid Handling will deliver 36 units of Allweiler"s new All-Optiflow series of pumps for the large Ambarli sewage plant near Istanbul. These progressing cavity pumps move sludge and exhibit very high energy efficiency. Their capacity is up to twice as high as conventional pumps. All-Optiflow pumps are suitable for moving virtually any liquid, including those that contain fibers and solids.September 26, 2012Colfax Fluid Handling to deliver chemical pumps to China

In January of 2013 Colfax Fluid Handling will deliver Allweiler screw pumps for a project in China. The PMDI pumps will be an important part of a new MDI plant in the Chinese city of ChongqingNovember 20, 2012Colfax Fluid Handling delivers bitumen pumps to Russia

Colfax Fluid Handling delivered a package of 21 Allweiler screw and centrifugal pumps for a bitumen production facility in Russia. The pumps are an important part of the plant, which is located in Novoshakhtinsk (Rostov region) and produces bitumen according to the "Biturox" process from Vienna-based P�rner Ingenieurgesellschaft mbH.January 31, 2013COLFAX FLUID HANDLING TO PROVIDE PUMPS FOR SAUDI ARABIA POWER PLANT

Colfax Fluid Handling, a business of Colfax Corporation (NYSE: CFX), has received an order to deliver 21 of its Allweiler screw pumps valued at more than �300,000 for a power plant in Saudi Arabia. The pumps will be an important part of a gas turbine power plant in Yanbu.March 28, 2013Colfax Fluid Handling to Deliver Chemical Pumps

Colfax Fluid Handling, a business unit of Colfax Corporation (NYSE: CFX), has received an order to deliver five Allweiler propeller pumps for a chemical plant in Saudi Arabia. The pumps are specially designed for use during production of explosive materials and are valued at approximately �900,000.June 6, 2013Gunter Connert is Direct Sales Manager at Colfax Fluid Handling

Colfax Fluid Handling has announced that Gunter Connert is now in charge of Direct Sales to Power & Industry customers in Europe, the Middle East, and Africa (EMEA). Colfax Fluid Handling is a business of Colfax Corporation (NYSE: CFX).June 27, 2013New screw pumps reduce operating costs by up to 40%

The new generation of screw pumps from Colfax Fluid Handling reduces operating costs by up to 40%. As complete pump sets consisting of the pump, motor, and a frequency converter, they achieve these savings without additional investment.July, 17 2013New screw pump from Colfax Fluid Handling

Colfax Fluid Handling, a business of Colfax Corporation (NYSE: CFX), will in June begin deliveries of a new screw pump for lubricating liquids. The new series covers a wide capacity range with a variety of installation variations. The pumps are suitable even for rough operating conditions.July 24, 2013COLFAX FLUID HANDLING�S ALLWEILER BRAND TAKES THIRD PLACE IN STATE ENVIRONMENTAL COMPETITION

Colfax Fluid Handling, a business of Colfax Corporation (NYSE: CFX) and a global leader in fluid-handling solutions for critical applications, today announced that that its Allweiler brand, based in Radolfzell, Germany, has been awarded third place in the Baden-W�rttembergian state competition for environmental technology in the Measurement, Control, and Regulation category. Its entry was an advanced electronic condition monitoring and control solution for pumps known as Allmind.March 25, 2014Stators from Colfax Fluid Handling: up to quintuple service life

Colfax Fluid Handling, a business of Colfax Corporation (NYSE: CFX), will present a new stator material at the IFAT trade fair in Munich (booth A6.129/230). Alldur was specially developed for use in sewage treatment plants and for pumping abrasive wastewater. The elastomer"s new chemical composition and production methods can increase service life by up to five times.July 4, 2014�berschrift

Colfax Fluid Handling (CFH), a business of Colfax Corporation (NYSE: CFX) today announced that pumps produced by its Allweiler brand will meet the Ecodesign Directive ErP 2009/125/EG energy efficiency directive beginning January 1, 2015 � two years ahead of required compliance.February 06, 2015Intelligent pump monitoring from Colfax Fluid Handling

Colfax Fluid Handling, a business segment of Colfax Corporation (NYSE: CFX) will demonstrate its commitment to Industry 4.0 by with an exhibit of its new intelligent platform for condition and operation monitoring at Hanover Fair. Known as IN-1000, it will be on display at "Pumpe DE PUMPplaza" (Hall 15, Booth G43).March 30, 2015Hapag Lloyd chooses electronic pump control from ColfaxFluidHandling

Hapag Lloyd will equip ships of the 13,200-TEU Hamburg Express class and other vessels with the CM-1000� pump control system.April�21, 2015Allweiler exhibits its pump competency at Nor-Shipping

Colfax Fluid Handling will introduce and demonstrate the latest version of the company�s Smart Technology CM-1000 Series smart controller for seawater cooling systems at Nor-Shipping (Booth #C03-14) in Oslo, Norway. The CM-1000 adjusts the flow rate of sea water pumps based on the temperature of the ship"s fresh water and current cooling requirements, thereby saving significant energy.April�29, 2015Intelligent pump monitoring for chemical engineering from Colfax Fluid Handling

Colfax Fluid Handling, a business segment of Colfax Corporation (NYSE: CFX) will demonstrate its commitment to Industry 4.0 with an exhibit of its new intelligent platform for condition and operation monitoring at ACHEMA fair. Known as IN-1000, it will be on display at hall 8.0, booth D63.July�31, 2015Colfax Fluid Handling Delivers Propeller Pumps for Chemicals

Colfax Fluid Handling has delivered end of 2014 three Allweiler propeller pumps to a German chemical company. The pumps will move sodium sulfate.March�04, 2016Colfax Fluid Handling exhibiting complete line of wastewater solutions at IFAT trade show

Colfax Fluid Handling will exhibit its complete line of Allweiler pumps for sewage plants at the IFAT show in Munich. This includes everything from macerators and peristaltic pumps to progressive cavity pumps, centrifugal pumps, and propeller pumps in a wide range of sizes.July 19,�2016Colfax to exhibit large seawater pump and turnkey control system at SMM

ALLWEILER is known as a competent developer and producer of individual pumps and complete pump systems. We work together with major planners and suppliers of power plants, renowned system builders (OEM""s) and end users in the power generation industry.

ALLWEILER will steadily expand its position of leadership in the global Power Generation market by offering builders and operators of powerplants a continuous line of innovative products and special services.

Allweiler produces a wide range of Pumps and Pump systems. Allweiler is one of the biggest market and technology leaders in the areas of ship-building, special industrial applications and power generation.

Allweiler uses the best quality materials to ensure that all the Pump systems and Pump types can operate in the safest and economical manner possible.

Allweiler Pumps are well known for their long service life time, efficiency, mean time between failure, mean time to repair, availability, reliability and maintainability.

This depends on several factors; how frequently are spare parts required? how long has the pump been in operation? and the price of the required spare parts versus the cost of a complete new pump. For example, if a new casing, impeller, shaft and mechanical seal are required, then it is more cost effective to purchase a complete new pump as a large proportion of the high value parts are required. If the pump is wearing frequently and prematurely, then this may be an indication that the wrong type or size of pump is installed. It is a good idea to talk to us in this situation as we may be able to identify the issue with your pump or system and select a more suitable pump for your requirements.

*Allweiler® Progressing Cavity Pumps are self-priming progressing cavity pumps used to pump or meter thin to highly viscous liquids, the pumping elements of which are the rotating rotor and the stationary stator.

Shanley Pump and Equipment, Inc. carries a full line of *Allweiler® Progressing Cavity Pumps and parts with ranges from 0 to 2500 GPM *Shanley Pump and Equipment, Inc. is not affiliated with nor a representative of *Allweiler® or the Colfax® Corporation nor any of their affiliates. Any references made are for informational purposes only.

Allweiler® NTT Self Cooling Centrifuge Pumps for Thermal Oil Pumping We carry a full line of *Allweiler® NTT Self Cooling Centrifuge Pumps and parts with ranges of 0 GPM to 6400 GPM.

The *Allweiler® NTT series Centrifugal pump for heat transfer applications is an ideal solution for the handling of organic heat-transfer oils. The NTT"s unique self-cooling design eliminates the need for additional cooling in any form due to its self-cooling design during operation.

At Shanley Pump and Equipment, Inc. we stock a complete line of *Allweiler® NTT thermal oil pumps. These are horizontal centrifugal pumps that are capable of pumping thermal oil at 660° degrees F (350°C) at up to 6,400 GPM with up to 430" feet of head and require no additional coiling. Shanley Pump and Equipment holds current in-house stock of NTT/CTT pumps with cast iron casings.

Centrifugal Pumps are pumps which convert mechanical energy into hydraulic energy by the centripetal force on the liquid. A rotating impeller increases the velocity of the fluid internally while working with the casing of the pump which acts to convert this increased velocity into a pressure increase for flow.

Centrifugal Pumps are used to pump a large variety of neutral or aggressive liquid, and environmentally hazardous liquids like water, hot water, lubrication oils, emulsions, thermal oils, and chemical products.

The interactive exploded view of an Allweiler progressive cavity pump (also called eccentric screw pump) helps you find the position number and full description of all wear parts.

Genuine Spare parts such as Allweiler stator, Allweiler rotor and coupling parts are usually rather expensive. SPS offers a wide range of 100 % compatible Allweiler ® spare parts of the highest quality standard at the best prices!

The Allweiler® progressive cavity pumps (or eccentric screw pumps) are quite popular and are found in all sectors of industrial activity – dosing, pumping viscous or pasty materials, foodstuff, chemicals and much more. They are also used in water treatment …

The Allweiler® company is German founded and still based in Germany, although it is now part of the US group Colfax that was incorporated in 1995. Allweiler offers a very wide range of pumps for all sorts of applications. In addition to the progressive cavity pumps, Allweiler® also manufactures many models as for example centrifugal and triple-screw pumps typically for the chemical and petrochemical industry among other sectors.

Note: SPS Pumps does not sell spare parts for screw pumps, but does sell spare parts for eccentric screw pumps (also called progressive cavity pumps) and for centrifugal pumps.

Propeller Pump, vertical submerged Pumped liquid Wastewater, activated sludge Main fields of application Commonly applied as recirculating pumps for digesters,

Three-Screw pump for lifting system Pumped liquid Hydraulic oils, synthetic hydraulic liquids, native oils, lubricating oils Main fields of application

Three-Screw pump Pumped liquid Hydraulic oils, synthetic hydraulic liquids, native oils, lubricating oils Main fields of application For generation of

Three-Screw pump for non lubricating fluids Pumped liquid Non- or mal-lubricating, slightly abrasive, corrosive Main fields of application Process engineering,

Three-Screw pump up to 16 bar, vertical submerged installation Pumped liquid Hydraulic oils, synthetic hydraulic liquids, native oils, lubricating oils

Eccentric screw pumps in block pump design AEB and with free axling AE-IE. This type of pump is one of the most useful pump types the world has yet seen.

Allweiler"s pumps are referred to as capacity indexes, e.g. AEB 1 L 200, which indicate that the pump can give 200 l/min at 400 rpm. The 1 indicates that it is a 1-speed pump for 6 bar, and the L defines the resistance of the rotating parts.

Apollo have a wide range of Pumps in both standard and API 610 execution. Vertical and Horizontal, double suction, between bearing Pumps, multistage segmental ring pumps both in standard and API 610 (BB4) design. Double casing, radially split, multistage Barrel pumps to API 610 (BB5). Suitable for a wide range of applications. www.apollo-goessnitz.de

Allweiler is one of the markets well known brands in Horizontal and Vertical centrifugal pumps and provides pumps in acc. with ISO 5199 / 2858, DIN 24255 and DIN EN 733 in most materials. Suitable for a wide range of standard applications for offshore and FPSO applications. Part of Colfax Pump group. www.allweiler.de

Argal has got a thirty-year activity in the chemical pumps manufacturing in thermoplastic chemical-resistant materials. The company delivers a large choice of pumps in different construction to address industrial applications where temperature ranges from –30° C to 120° C, flow up to 1600 m3/h and head up to 150 meters. www.argal.it

In addition to its patented rotary lobe pumps, Boerger also offers products in chopping technology for agricultural use as well as components for biogas plants. Such as stainless steel tanks, bioselect – solid/liquid separation, powerfeed – liquid metering technology, B-MX – submersible motorized mixers in stainless steel, submersible cutting pumps & motorized pumps, special auger feeds, jet agitating nozzles and flushing lines, valves and installation material. www.boerger.com

Manufacturer of air operated diaphragm pumps and Peristaltic pumps. DEPA® air operated Diaphragm pumps in metallic or non-metallic materials suitable for handling of most liquids. ELRO® Peristaltic pumps with low sear capability in metallic or non-metallic materials suitable for handling of most liquids. www.cranecpe.com

Leistritz screw pumps are used to supply a wide variety of media with different viscosities in a multitude of applications. This pump type offers advantages like low-pulsation pumping of the fluid, extremely low vibration and noise, high flow rates, pumping a wide range of viscosities, low-wear operation and long service life. www.pumps.leistritz.com

A leading manufacturer of API 685 and ISO seal-less magnetic driven Centrifugal and Peripheral pumps for most applications. Both single and Multistage designs available. Wide range of materials for any process application. The pumps offer an excellent environmental solution for both onshore, offshore applications. www.mpumps.it

OPTIMEX company is specialized in designing and manufacturing API 685 & ISO 15783 Canned Motor Pumps, for chemical, petrochemical, oil & gas and nuclear industries. With more than 300 pump designs successfully installed, OPTIMEX is nowadays a major actor on the international market and continues its ambitious development programm in order to complete its range of products, including very innovative canned motor pumps. www.optimex-pumps.com

Schäfer (Formerly Schäfer&Urbach) have a wide range of heavy duty Triplex Plunger Pumps used for water and mud injection, both for process and drilling applications.  100 m3/h with discharge pressure of 350 barg has been supplied to Ekofisk. For Oil and Gas applications the pump are in compliance with API674.  www.schaefer-ph.com

Strobl Pumpen is a specialized manufacturer of standard centrifugal pumps and centrifugal pumps acc. to API 610 with a wide range of material- and sealing variations. We manufacture horizontal and vertical pumps acc. to API 610 (VS1, VS4, VS6, OH1-5, BB4, BB5) and special executions to fit customers requirements for oil- and gas industry as well as other industries. The company is approved and certified to ISO 9001:2015. www.strobl-pumpen.de

Sundyne manufactures highly reliable engineered Pumps and Compressors that are used to fuel life’s basic needs. For companies in the oil, chemical and water process industries struggling with high energy and maintenance costs, Sundyne centrifugal integrally geared and sealless magnetic drive pumps represent a superior performance alternative. Sundyne process gas compressors have been in critical services for decades delivering highly engineered performance for a wide range of applications.

Wepuko PAHNKE is a German mechanical and systems engineering company, specialized in the design and manufacturing of high-pressure pumps and hydraulic forging presses, including their drives and controls. The range of pumps includes triplex plunger pumps and radial piston pumps with variable and constant displacement. Wepuko PAHNKE also develops and builds units and systems according to customer specifications. Furthermore, the company offers complete descaling systems. www.wepuko.de

Manufacturer of High pressure plunger pumps for the oil and gas Industry. Process plunger pumps for process purposes like methanol and chemical injection etc. Pressures up to 3000 barg and capacities up to 100 m³/h. Both electrical and combustion engine driven pumps in horizontal or vertical execution All metallurgies available. www.woma.de

The wastewater treatment plant at Stendal is aiming to be entirely energy self-sufficient by 2025. The site has a biogas production facility which provides low carbon energy from waste. Sludge produced from treating wastewater is pumped into storage tanks then transferred to the biogas plant.

To reduce reliance on the grid and grow the percentage of operations supported by low carbon energy, operators at the plant began assessing equipment improvements to achieve this. The eccentric screw pumps were quickly identified as an area for enhancement.

Eccentric screw pumps (also known as progressive cavity pumps), are used to transport the large amounts of sludge generated during wastewater treatment. This design of pump is preferred as it is resistant to clogging and can accommodate fluids containing solids. Eccentric screw pumps operate around-the-clock, supporting continuous wastewater treatment processes.

However, continuous operation requires a large quantity of energy. Furthermore, pumps often work at low speeds, which can result in the motors powering them operating inefficiently. With the stated aim of self-sufficiency in energy, Stendal wastewater treatment plant operators wanted to enhance the efficiency of these pumps to reduce overall energy demands. Luckily, a proven solution was ready and available to plant operators.

A key advantage for PMSMs in eccentric screw pump applications is that they deliver high torque at low speeds with increased efficiency. At Stendal, the pumps typically run at around 25 Hz to reduce wear and provide a performance reserve for high volumes of water - a frequency at which an asynchronous motor would have to be oversized to deliver the desired torque figure, resulting in energy inefficiency. However, due to inherent characteristics under partial load, PMSMs can deliver full torque at this speed with a smaller motor size. High torque is available from start-up too, ideal for pumping applications. Furthermore, operators can expect energy savings of more than 30% when under partial load compared to asynchronous motors.

These benefits haven’t gone unnoticed by CIRCOR’S German entity Allweiler GmbH, a leading pump manufacturer that has collaborated with Bauer to combine its pumps with PMSMs. In 2017, both companies trialled an installation at Bayreuth sewage treatment plant, which delivered a sizable improvement in efficiency.

For Stendal, Allweiler specified Series AE2E Eccentric Screw Pumps, a popular choice in wastewater applications due to the ability to handle highly viscous or aggressive liquids that contain solids or fibres. The pumps also have high wear resistance, extending service life. These were coupled to Bauer BG30 Helical-Series gears with PMSMs and installed in the cellar of the pumping house at the facility.

The benefits to the facility of moving to Allweiler pumps powered by Bauer Helical PMSM geared motord have been illustrated by the data, as Micheal Riske, Head of Wastewater/Water Department at Stendal discovered:“We operated two identical pumps alternately with a PMSM and an IE3 asynchronous motor for a month each, comparing electricity demand and primary sludge pumping. The pump with the PMSM installed was found to have consumed 24% less energy.”

During assessment, the pump with the PMSM consumed 495.3 kW of energy to pump 2,410 m3 of primary sludge. The IE3 asynchronous motor required 729.3 kW to pump 2699.5 m3 of sludge. This equates to 4.866 m3 per kW for the PMSM and 3.7 m3 per kW for the IE3 motor. At Stendal, the Allweiler Eccentric Screw Pumps can pump almost a third more sludge at the same output. As well as increasing power efficiency, the Bauer geared motors also delivered improved performance in the application.

Klaus Kaiser, Sales Engineer at Allweiler, drawing on findings at multiple installations, added: “From our experience, it takes no more than 6 months to achieve return on investment (ROI) on a PMSM.”

Incorporated in 1990, the Shilpa Trade Links Pvt. Ltd., started its business activities as an exclusive accredited agents of TUSHACO pumps and REMI motors. Our commitment to provide excellent quality initially at attractive prices soon fetched us the accolades of discerning clients like Hindustan Zinc, Grasim Industries, Shree Cement, Chambal Fertilizers, Nuclear power Corporation, Kota Thermal Power station, Raj.Spg. & Wvg. Mills, Bhilwara Spinners etc.

Encouraged by their support, we expanded the sphere of operation and started trading of a complete range of Pumps and Motors, Seals and Strainers etc. to match all their requirements and today we are in a position to claim our presence in all the industries across Rajasthan. In a competitive market our professional approach is now forcing us to expand our wings in other parts of the country.