allweiler mud pump supplier

The oldest German pump manufacturer, founded in 1860, Allweiler GmbH is today the European market and technology leader in fluid handling solutions for shipbuilding, power generation and special industrial applications. Our product portfolio is unrivaled in the industry and includes centrifugal, propeller, screw spindle and progressive cavity pumps, as well as complete pump systems. We also manufacture peristaltic pumps and macerators. In addition to our Allweiler-branded pumps and systems, we sell the pumps and solutions of our sister company Zenith - gear pumps.

We’ve built our success on putting our customers’ needs as the top priority in the development of every individual Allweiler product. Our customers benefit from a deep knowledge of pump technologies and expertise in fluid handling applications that has grown over generations. They know our pumps are precisely manufactured to address specific applications areas and trust the quality and reliability of Allweiler pump performance. We back our pumps with expert, personal, onsite and comprehensive services.

ALLWEILER has a complete line of products that provides its customers with the safest and most efficient solutions for all typesof applications. The product line includes Two and Three-SpindleScrew Pumps,Centrifugal Pumps, Propeller Pumps, ProgressingCavity Pumps,Peristaltic Pumps and Macerators. The pump seriesincludesvertical pumps, block units, pumps with magnet drive,immersedpumps, pumps for very thick liquids as well as pumped solidsandmulti-stage pumps for high pump heads. ALLWEILER pumps canbe used individually or installed in a series.

We give CAD users online access to true-to-scale and not-true-to-scale installation drawings ...ALLSELECT Pump Selection ProgramOur pump-selection software

This depends on several factors; how frequently are spare parts required? how long has the pump been in operation? and the price of the required spare parts versus the cost of a complete new pump. For example, if a new casing, impeller, shaft and mechanical seal are required, then it is more cost effective to purchase a complete new pump as a large proportion of the high value parts are required. If the pump is wearing frequently and prematurely, then this may be an indication that the wrong type or size of pump is installed. It is a good idea to talk to us in this situation as we may be able to identify the issue with your pump or system and select a more suitable pump for your requirements.

*Allweiler® Progressing Cavity Pumps are self-priming progressing cavity pumps used to pump or meter thin to highly viscous liquids, the pumping elements of which are the rotating rotor and the stationary stator.

Shanley Pump and Equipment, Inc. carries a full line of *Allweiler® Progressing Cavity Pumps and parts with ranges from 0 to 2500 GPM *Shanley Pump and Equipment, Inc. is not affiliated with nor a representative of *Allweiler® or the Colfax® Corporation nor any of their affiliates. Any references made are for informational purposes only.

Allweiler® NTT Self Cooling Centrifuge Pumps for Thermal Oil Pumping We carry a full line of *Allweiler® NTT Self Cooling Centrifuge Pumps and parts with ranges of 0 GPM to 6400 GPM.

The *Allweiler® NTT series Centrifugal pump for heat transfer applications is an ideal solution for the handling of organic heat-transfer oils. The NTT"s unique self-cooling design eliminates the need for additional cooling in any form due to its self-cooling design during operation.

At Shanley Pump and Equipment, Inc. we stock a complete line of *Allweiler® NTT thermal oil pumps. These are horizontal centrifugal pumps that are capable of pumping thermal oil at 660° degrees F (350°C) at up to 6,400 GPM with up to 430" feet of head and require no additional coiling. Shanley Pump and Equipment holds current in-house stock of NTT/CTT pumps with cast iron casings.

Centrifugal Pumps are pumps which convert mechanical energy into hydraulic energy by the centripetal force on the liquid. A rotating impeller increases the velocity of the fluid internally while working with the casing of the pump which acts to convert this increased velocity into a pressure increase for flow.

Centrifugal Pumps are used to pump a large variety of neutral or aggressive liquid, and environmentally hazardous liquids like water, hot water, lubrication oils, emulsions, thermal oils, and chemical products.

The interactive exploded view of an Allweiler progressive cavity pump (also called eccentric screw pump) helps you find the position number and full description of all wear parts.

Genuine Spare parts such as Allweiler stator, Allweiler rotor and coupling parts are usually rather expensive. SPS offers a wide range of 100 % compatible Allweiler ® spare parts of the highest quality standard at the best prices!

The Allweiler® progressive cavity pumps (or eccentric screw pumps) are quite popular and are found in all sectors of industrial activity – dosing, pumping viscous or pasty materials, foodstuff, chemicals and much more. They are also used in water treatment …

The Allweiler® company is German founded and still based in Germany, although it is now part of the US group Colfax that was incorporated in 1995. Allweiler offers a very wide range of pumps for all sorts of applications. In addition to the progressive cavity pumps, Allweiler® also manufactures many models as for example centrifugal and triple-screw pumps typically for the chemical and petrochemical industry among other sectors.

Note: SPS Pumps does not sell spare parts for screw pumps, but does sell spare parts for eccentric screw pumps (also called progressive cavity pumps) and for centrifugal pumps.

Eccentric screw pumps in block pump design AEB and with free axling AE-IE. This type of pump is one of the most useful pump types the world has yet seen.

Allweiler"s pumps are referred to as capacity indexes, e.g. AEB 1 L 200, which indicate that the pump can give 200 l/min at 400 rpm. The 1 indicates that it is a 1-speed pump for 6 bar, and the L defines the resistance of the rotating parts.

SN Screw Pump Main Feature: (three screw pump or three spindle pump), It is in same design, size and specification with Allweiler SN three screw pump. Sub models: SNH, SNF and SNS three screw pump, all similar to Allweiler pump.

The three spindle screw pump is a positive displacement rotary pump. Inside the pump casing, as the flanks of teeth of drive screw and idler screws are engaged and the screws are also matched with the three inset holes, several sealed moving chambers are thereby formed in between the pump inlet and outlet end.These closed chambers will take the medium inside to move from the inlet end axially and let flow pressurized progressively, to have a continuous, constant ,axial flow pressured liquid.

The three spindle screw pumps are suitable for pumping various kinds of non-corrosive oil without contents of solid grains and liquids similar to lubricating oils, The viscosity of mediums to be conveyed range from 1.2 to 100°E(3.0 to 760 cst) ,liquid with a higher viscosity could also be pumped after heating up (lowering down the viscosity). The flow range is 0.2~590m3/h, and the maximum working pressure is 100 bar, The highest temperature is 150C.

This SN screw pump is in same design, specification and size with Allweiler SN screw pump. The SN three spindle pump spare parts is also available in our sides. Since this pump is produced in China, the price is much competitive than the Origin.

Incorporated in 1990, the Shilpa Trade Links Pvt. Ltd., started its business activities as an exclusive accredited agents of TUSHACO pumps and REMI motors. Our commitment to provide excellent quality initially at attractive prices soon fetched us the accolades of discerning clients like Hindustan Zinc, Grasim Industries, Shree Cement, Chambal Fertilizers, Nuclear power Corporation, Kota Thermal Power station, Raj.Spg. & Wvg. Mills, Bhilwara Spinners etc.

Encouraged by their support, we expanded the sphere of operation and started trading of a complete range of Pumps and Motors, Seals and Strainers etc. to match all their requirements and today we are in a position to claim our presence in all the industries across Rajasthan. In a competitive market our professional approach is now forcing us to expand our wings in other parts of the country.

*Allweiler® Progressing Cavity Pumps are self-priming progressing cavity pumps used to pump or meter thin to highly viscous liquids, the pumping elements of which are the rotating rotor and the stationary stator.

Shanley Pump and Equipment, Inc. carries a full line of *Allweiler® Progressing Cavity Pumps and parts with ranges from 0 to 2500 GPM *Shanley Pump and Equipment, Inc. is not affiliated with nor a representative of *Allweiler® or the Colfax® Corporation nor any of their affiliates. Any references made are for informational purposes only.

Allweiler® NTT Self Cooling Centrifuge Pumps for Thermal Oil Pumping We carry a full line of *Allweiler® NTT Self Cooling Centrifuge Pumps and parts with ranges of 0 GPM to 6400 GPM.

The *Allweiler® NTT series Centrifugal pump for heat transfer applications is an ideal solution for the handling of organic heat-transfer oils. The NTT"s unique self-cooling design eliminates the need for additional cooling in any form due to its self-cooling design during operation.

At Shanley Pump and Equipment, Inc. we stock a complete line of *Allweiler® NTT thermal oil pumps. These are horizontal centrifugal pumps that are capable of pumping thermal oil at 660° degrees F (350°C) at up to 6,400 GPM with up to 430" feet of head and require no additional coiling. Shanley Pump and Equipment holds current in-house stock of NTT/CTT pumps with cast iron casings.

Centrifugal Pumps are pumps which convert mechanical energy into hydraulic energy by the centripetal force on the liquid. A rotating impeller increases the velocity of the fluid internally while working with the casing of the pump which acts to convert this increased velocity into a pressure increase for flow.

Centrifugal Pumps are used to pump a large variety of neutral or aggressive liquid, and environmentally hazardous liquids like water, hot water, lubrication oils, emulsions, thermal oils, and chemical products.

Allweiler, a business unit of CIRCOR, will exhibit at the Pumps & Valves trade fair in Dortmund, Germany February 12th and 13th 2020 (Hall 6, Booth R19-6).

Highlights of their exhibit will be the new AEB-DE dosing pump with an extremely flexible and space-saving design as well as OptiFix™, a next-generation progressing cavity pump, designed to reduce service costs. Allweiler"s team of experts will demonstrate its functionality by guiding visitors through five easy steps to dismantle the pumps.

With its quick-change design, the OptiFix progressing cavity pump is valued for its ability to save time and money. Its new service solution offers the shortest average repair time in its class. This results in less downtime; reduced maintenance and lower service costs.

OptiFix can reduce service times by as much as 85%. Due to its patented design, this pump can be serviced, repaired, and retrofitted in a fraction of the normal time. The pump"s rotor and stator can be removed without dismantling the discharge and suction casings. “If combined with the patented ALLDUR® stator, service life can be increased by as much as five times,” according to Jannik Röben, Director of Sales in Germany.

This opens up new opportunities for standardisation, easier stock-keeping, and straightforward adaptation of pump capacity. The pumps are delivered with high-quality stainless steel casings as standard so they can be used universally.

Its vertical installation option also allows users to design flexible and space-saving systems. Advanced pumping elements and the resulting optimised clamping give AEB-DE high dosing accuracy and stable performance curves.

CIRCOR’s comprehensive selection of pumps, valves, controllers, and services from leading brands allow it to serve a wide range of user markets and sales regions.

In addition to a variety of pump solutions, CIRCOR will also exhibit RTK, a feedwater valve with an integrated freewheel that was specially designed to protect feedwater pumps from cavitation.

This unique valve serves two purposes: to act as a feedwater control valve and to provide a bypass function to protect the pump from damage. The feed water valve has a hardened trim that resists wearing for lower overall maintenance costs and extended pump service life.

*Liberty Process Equipment, Inc. is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® All referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.