drilling mud pump price made in china

MCM 250 Mud Master Cantilevered Mud Pump MCM 250 Mud Pump is cantilevered pumps, used for handling strong abrasive and corrosive slurries. It is widely applied in 1.Mining (solids fluid transferring and dewatering) 2.Metallurgy 3.Coal washery 4.Power plant 5.Dredging 6.Building material 7.Waste and sewage treatment 8.Paper and pulp 9.Chemical process industry 10.Cement and blender 11.Water well drilling Materials of Construction The main wear parts of MCM 250 Centrifual Pump are wet parts. Quality Inspection The Quality Control Center is equipped with advanced precise quality testing instruments We have experienced wok team

There are three types of mud pumps, depending on the type of client and the size they want. For general, mud pumps, there are three basic types of mud pumps, depending on the type of client and budget. The piston pump is another compressed mud pump, which is a pushed electric compressor mud pumps and by compressed air.@@@@@

Electric mud pumps are largely divided into three categories, among them the electric mud pumps and the semi-trash mud pumps. The piston inflated mud pumps are also classified in terms of the type of mud pumps, among them are electric mud pumps and semi-trash mud pumps. In addition, the piston inflates mud and mud pumps will be inflated by the piston, which is inflated mud pumps.

Emsco、Gardner-Denver, National oilwell, Ideco, Brewster, Drillmec, Wirth, Ellis, Williams, OPI, Mud King, LEWCO, Halliburton, SPM, Schlumberger, Weatherford

Find NB series horizontal mud pump from triplex reciprocating pump manufacturer - Saigao gruop in China. The NB series horizontal mud pump can be widely used, which the price of...

The made-in-China F Series mud pumps can meet the requirements of the same manufacturing technique and quality level as those of F series mud pumps of EMSCO, IDECO, GARDNER DENVOR, OILWELL etc. Now, F series mud pumps (from F-500 to F-2200) have been produced in batches and sold to many abroad oilfields.

KINGWELL OILFIELD export-orientated mud pump parts, including discharge Bladder, cylind, Piston assembly, liner, cylinder assembly, piston rod, 2S gear oil pump, ceramic liner,

flange shear relief valve, (value insert assy)valve seat, flashboard assy, crosshead, oil seal, oil seal ring, rod packing, fluid ends etc. All of them meet or exceed DIN and API standards and have been exported to U.K., Germany, USA, Canada, Pakistan, Middle East, and so on.We also supply mud pump parts according to drawings or samples supplied by our customers.

2. 3NB Series Triplex Mud Pump3NB series triplex mud pump is one popular piston pump used for local market with local design, now it"s also greatly 3NB Series Triplex Mud Pump.

3. QW-9 Triplex Mud PumpModel QW-9 mud pump is a horizontal Triplex Single Acting piston pump which is made as per American technology and API standards.

1). Technical Support and Production Ability: Although we are one relatively new company, but we have the most professional engineers with tens of years experience in mud pump. And we have hundreds of highly skilled workers working on the pump parts and pump assembling with numerous advanced machines. Our production ability has been siteaudited by supervising inspectorate like France BV (Bureau Veritas), DNV(Det Norske Veritas) and SGS-CSTC(Standards Technical Services Co., Ltd.)

2). Quality Assurance: Ten professional inspectors performstrict quality inspection from the initial forgings, castings, other rawmaterials, each finished machined parts until the final assembling of the pump. Each part assembled on the pump will be well tested and highly qualified. Andfor each pump finished, it will be running tested in our test center for atleast 4 hours. Quality certificate, Inspection report and testing report will beattached when pump is delivered. 12 Months quality guarantee will be offered for each pump.

3). Competitive Price:We are one of the top pump manufacturers in China. We have the greatest advantages in price. We can not offer you the lowest price in China, but most competitive price but with very good quality.

4). Quick Delivery: Usually we will keep some pump model in stock so that we can make fast delivery for clients with urgent need. For pump we do not have in stock, we can also deliver with 40 days.

BW250 mud pump is a horizontal triplex single acting reciprocating piston pump, which has two bore and fourth gear speed. Displacement and hole depth can be adjusted according to the application, the deepest can be adjusted to the application, the deepest can be used with 1500 meters drilling rig, it also can be used cement perfusion.

Dezhou Rundong Petroleum Machinery Co., Ltd is major in manufacturing oil drilling mud pump spare parts and drilling tools, in which liners, pistons and valves that developed new have got national patent certificate. Mud pump parts we manufactured can be totally exchangeable with spare parts from original manufacturer, and have excellent performance especially in drilling conditions of high temperature, high pressure, oil base mud, acid base mud and high sand content mud etc.

We have been committed to continuous optimization and upgrading of drilling mud pump products.We accumulate rich first-hand technical information through our service to drilling projects, for example different material products’ performance under different drilling conditions. Our aim is to make products manufactured can be more suitable for oilfield drilling needs, and our goal is where there is oil, there is Deshi Brand products.

Main advantages of the mud pump consumables that we manufacturedProducts are produced according to ISO9001 quality system,APISpec7K standard, and each process can be tracked, recorded and traceable

Years of production experience accumulation and continuous innovation, make parts manufacturing process more sophisticated, products service time more longer, cost performance more higher. Drilling cost can be effectively reduced by taking these products.

Import spare parts such as valve module, crankshaft, pinion shaft’s material are high quality alloy steel,The power end herringbone gear adopts the grinding process, the gear precision is high, the processing precision of the matching components is much more higher, which can make the whole mud pump can run more smoothly.

The products have excellent low temperature resistance and can be used normally in low temperature drilling conditions, minimum temperature can be - 45 °C.

A wide variety of impellers and shaft seals provide a prefect fit for a wide range applications. The DE-PUMP ®slurrypumpprovidesexcellentwearlifewhilemaintaining efficiencyduringthewearcycleprovidingthebesttotaloperatingcost.