mono mud pump brands

Centerline Manufacturing is committed to the highest level of customer service quality.  Every Centerline pump is comprehensively and repeatedly tested at diverse pressure levels to assure that it goes to our customer in perfect operational order. Centerline technicians work to ensure that our customers fully understand the operation of the model being delivered.  If a customer"s pump is down, we understand the importance of timely response and parts availability.  Centerline technicians will assess the problem and make repairs to bring the pump back into new specification. The Centerline mud pump technicians are well versed and qualified to operate and repair any product that is provided to the customer.

NOV manufactures Mono™ progressing cavity pumps and pump parts and has a wide product range suitable for the pumping of fluids within the waste water, chemical, food, beverage, paper, mining, mineral processing, marine, agricultural and oil and gas sectors.

We are also the inventors of the EZstrip™ family of products which provide a Maintain-In-Place solution for the maintenance of progressing cavity pumps and associated products.

NOV also supplies grinders, screens and packaged pump systems, ideally suited for the efficient maceration, screening and pumping of waste water flows. A full range of progressing cavity pump parts are available 24 hours a day, 365 days a year and can be ordered online or through our authorized sales network, to ensure minimum downtime of your equipment.

The Company has an extended portfolio and covers most other process industries including water and wastewater, pulp and paper, agriculture, mining, chemicals, and food production. The Moyno™ and Mono™ brands are globally recognized in these industries as market leads in the design, manufacture and supply of progressing cavity (PC) pumps. The pump ranges are complemented by additional product lines including grinders, screens, Chemineer™ mixers and complete packaged systems.

National Oilwell Varco offers the most versatile array of downhole motors available for straight or directional drilling. Rotary power is produced by a Monoflo positive displacement progressing cavity mud motor. The mud motor power sectionsoffer a wide range of bit speeds and torques and can be tailored to function in both high bottom-hole temperatures and inverted mud systems. Motors are available with a fixed or an adjustable housing located between the motor and the bearing assembly. The adjustable housing is easily rig adjustable from zero (or straight) to a three-degree bend in 12 increments or a four-degree bend in 18 increments.

The GT635 Geothermal Drilling Rig in operation showcasing a mud drilling setup with an auger drilling pipe, using a submersible sand guzzler (hydraulic driven, pick-up-pump designed for the water well driller). This pump is capable of lifting up to 500 GPM of return drilling mud, as well as solids as large as 1"(2.5cm), to a shaker or tank. The unit won"t air lock a

Our clients can avail from us Self Priming Mud Pump that comes with self priming action, which ensures easy maintenance. These are durable, cost effective and also provided with non-clogging impeller to handle suspended solids. Designed using latest technology, these pump optimum performance and are used in steel & thermal plants.

We manufacturer of mud pump, are presenting our range under “Vijay” Brand name. The offered mud pump is designed to circulate drilling fluid under high pressure and promote the variegated crude oil and mud slurry handling applications in oil & cement segments.

Handling of the mud during the drilling crude oil has become easy with the offered range of the mud pump, thanks to the ingenious configuration of thereof, wherein the inner curvatures of pump casing have been customized to reduce the load on the impeller, whereas raise the discharge volume. In order to prevent the corrosion and early aging, all the wet end parts of this mud pump are engineered using the considerably applauded PP (polypropylene) material attributing excellent corrosion resistance and hence is also perceived as the PP pump or polypropylene pump in the variegated industries.

The effectiveness of this mud pump ensures that drilling mud is circulated profoundly to the bottom of the home at sterling pressure and volume to bring drilling debris out of the well hole and thereby is immensely popular in the domestic as well as global market. Owing the fame of this mud pump (PP pump), we have made it available in the miscellaneous specifications as below.

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

The "VIRAJ" make "VSPM" series is designed in self priming Non-clog Horizontal pump of Mono Block and only pump construction. This series pumps available with semi open type impeller s per customer application. This pump future is quick self priming action, long life due to replaceable wearing parts and for priming no need foot valve and easy maintenance and spare available.

Easy to install:- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.

When choosing a size and type of mud pump for your drilling project, there are several factors to consider. These would include not only cost and size of pump that best fits your drilling rig, but also the diameter, depth and hole conditions you are drilling through. I know that this sounds like a lot to consider, but if you are set up the right way before the job starts, you will thank me later.

Recommended practice is to maintain a minimum of 100 to 150 feet per minute of uphole velocity for drill cuttings. Larger diameter wells for irrigation, agriculture or municipalities may violate this rule, because it may not be economically feasible to pump this much mud for the job. Uphole velocity is determined by the flow rate of the mud system, diameter of the borehole and the diameter of the drill pipe. There are many tools, including handbooks, rule of thumb, slide rule calculators and now apps on your handheld device, to calculate velocity. It is always good to remember the time it takes to get the cuttings off the bottom of the well. If you are drilling at 200 feet, then a 100-foot-per-minute velocity means that it would take two minutes to get the cuttings out of the hole. This is always a good reminder of what you are drilling through and how long ago it was that you drilled it. Ground conditions and rock formations are ever changing as you go deeper. Wouldn’t it be nice if they all remained the same?

Centrifugal-style mud pumps are very popular in our industry due to their size and weight, as well as flow rate capacity for an affordable price. There are many models and brands out there, and most of them are very good value. How does a centrifugal mud pump work? The rotation of the impeller accelerates the fluid into the volute or diffuser chamber. The added energy from the acceleration increases the velocity and pressure of the fluid. These pumps are known to be very inefficient. This means that it takes more energy to increase the flow and pressure of the fluid when compared to a piston-style pump. However, you have a significant advantage in flow rates from a centrifugal pump versus a piston pump. If you are drilling deeper wells with heavier cuttings, you will be forced at some point to use a piston-style mud pump. They have much higher efficiencies in transferring the input energy into flow and pressure, therefore resulting in much higher pressure capabilities.

Piston-style mud pumps utilize a piston or plunger that travels back and forth in a chamber known as a cylinder. These pumps are also called “positive displacement” pumps because they literally push the fluid forward. This fluid builds up pressure and forces a spring-loaded valve to open and allow the fluid to escape into the discharge piping of the pump and then down the borehole. Since the expansion process is much smaller (almost insignificant) compared to a centrifugal pump, there is much lower energy loss. Plunger-style pumps can develop upwards of 15,000 psi for well treatments and hydraulic fracturing. Centrifugal pumps, in comparison, usually operate below 300 psi. If you are comparing most drilling pumps, centrifugal pumps operate from 60 to 125 psi and piston pumps operate around 150 to 300 psi. There are many exceptions and special applications for drilling, but these numbers should cover 80 percent of all equipment operating out there.

The restriction of putting a piston-style mud pump onto drilling rigs has always been the physical size and weight to provide adequate flow and pressure to your drilling fluid. Because of this, the industry needed a new solution to this age-old issue.

As the senior design engineer for Ingersoll-Rand’s Deephole Drilling Business Unit, I had the distinct pleasure of working with him and incorporating his Centerline Mud Pump into our drilling rig platforms.

In the late ’90s — and perhaps even earlier —  Ingersoll-Rand had tried several times to develop a hydraulic-driven mud pump that would last an acceptable life- and duty-cycle for a well drilling contractor. With all of our resources and design wisdom, we were unable to solve this problem. Not only did Miller provide a solution, thus saving the size and weight of a typical gear-driven mud pump, he also provided a new offering — a mono-cylinder mud pump. This double-acting piston pump provided as much mud flow and pressure as a standard 5 X 6 duplex pump with incredible size and weight savings.

The true innovation was providing the well driller a solution for their mud pump requirements that was the right size and weight to integrate into both existing and new drilling rigs. Regardless of drill rig manufacturer and hydraulic system design, Centerline has provided a mud pump integration on hundreds of customer’s drilling rigs. Both mono-cylinder and duplex-cylinder pumps can fit nicely on the deck, across the frame or even be configured for under-deck mounting. This would not be possible with conventional mud pump designs.

The second generation design for the Centerline Mud Pump is expected later this year, and I believe it will be a true game changer for this industry. It also will open up the application to many other industries that require a heavier-duty cycle for a piston pump application.

Easy to install:- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.

• Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension, clean or dirty low viscosity petroleum product or solvents, milk of lime, caustic soda.

• pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension, dosing neutralizing liquids, pumping out settled sludge.

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.