mud pump control system manufacturer

Our control systems can be engineered as stand-alone systems or for integration with other control systems, such as the OnTrack integrated drilling controls system.

Control cabins are tailored to the installation area layout and incorporate integrated control system equipment for hands-off mixing, dosing, and transfer operations. They feature a noise- and vibration-insulated housing as well as windows, lights, and HVAC.

Field instrumentation incorporates a range of packages to enhance and support the control experience. Their level indicators, pressure transmitters, and density transmitters offer precise degree of measurement and indication.

Distributor of engineered fluid handling pumps, packaged pumping systems, repairs, parts, & integrated pump control systems. Mud pumps, chiller/condenser pumps, plumbing pumps, boiler feed systems, in-line circulators, condensate systems, sump & sewage pumps, end suction pumps, submersible sump & sewage, non-clogs & grinders, self primers, packaged lift stations, variable speed pump systems, metering pumps, chemical injection systems, chemical mixing systems, peristaltic pumps for chemical feed, high viscous & shear sensitive fluids, self primers, stainless steel, trash pumps, hot oil pumps, vertical turbine pumps, sanitary pumps, marine pumps, industrial pumps, ANSI end suction, vertical cantilever, double suction, non-clogs, progressive cavity pumps, helical gear pumps, well pumps, lab pumps, hose pumps, control valves, check valves, air release valves, tanks, pressure vessels.

Continental Emsco Drilling Products, Inc., which consisted of Emsco drilling machinery and Wilson mobile rigs, was purchased by National-Oilwell, Inc on July 7, 1999. To our knowledge, no pumps have been manufactured and sold under the Emsco brand name since National-Oilwell acquired them.

Fairbanks Morse pumps are currently manufactured in Kansas City, Kansas. Fairbanks Morse is a division of Pentair ever since August, 1997 when Pentair purchased the General Signal Pump Group.

Gaso pumps are manufactured by National Oilwell Varco. Gaso was acquired as "Wheatley Gaso" by National-Oilwell in the year 2000. At the time, Wheatley Gaso was owned by Halliburton.

Skytop Brewster pumps are no longer available as new pumps. Skytop Brewster(Cnsld Gold), a unit of Hansen PLC"s Consolidated Gold Fields subsidiary, was acquired while in bankruptcy by National-Oilwell, Inc. in November, 1999.

Monitor Systems were asked to design, manufacture, install, test and commission a new Zone 2 Certified mud pump console for the Amirante Semi-submersible. Three mud pumps operate on the Transocean Amirante, and the new console had to incorporate the control of all three pumps in one stainless steel wall mounted enclosure.

The accurate and safe control of the mud pump on any drilling rig is of huge importance to the operator. The drilling rig mud pump is the main device on the rig designed to circulate drilling fluid under high pressure (< 7,500 psi) down the drill string and back up the annulus.

Mud pumps are considered vital to the operation of the drilling rig. If the mud pumps fail it affects production and can be very costly to repair due to the downtime in production.

Monitor Systems have an experienced team of in-house engineers that are knowledged specifically in the design, manufacture, FAT and installation of Zone 2 Atex compliant control panels, enclosures and instrumentation.

Our custom design and engineering service means that we are able to build control, monitoring and instrumentation systems to unique and compliant requirements.

“We have significant experience in understanding our customers’ needs and objectives, as well as mobilising the necessary resources required to deliver projects both on time and on budget around the world.” commented Brian Sinclair, Managing Director at Monitor Systems.

Our manufacturer Mud Pump skid is suitable for operations in rough, windy, damp and dusty oilfield conditions. Dependent upon customer horsepower requirements the engine sizes will vary.

All equipment is rated for operating at ambient temperatures up to +120 Deg F at 1200 ft altitude. The unit is built on heavy duty oilfield skid with lift frame. The control system is mounted in a stainless steel box on the side of the unit. The digital display provides all important engine and transmission data. Unit is also equipped with emergency kill function.

We manufacture a complete line of solids control equipment including; mud reclaimers & mud recyclers, shale shakers, de-silters, de-sanders, and pump packages, all for sale or for rent, allowing us to achieve a higher standard of excellence.

A large inventory of parts and accessories , and knowledgeable staff makes Mud Technology the smart choice for operators needing fast-turnaround times and competitive pricing.

Our staff is available to assist you with complete line of parts, including pump parts, shaker screens and drilling mud all available at competitive prices. As we are just a phone call away, we are available to answer questions and assist you with troubleshooting while you are in the field.

Mud pumps are the heart of a drilling operation. TSM designs and manufactures extremely reliable and easy-to-maintain mud pumps, eliminating unnecessary maintenance and downtime.

Central lubrication manifold system with Stainless Steel tubing for feeding all main, eccentric, and pinion bearings. Pressurized lubrication is also provided to the upper and lower crosshead slide for longer crosshead life

Loadmaster Universal Rigs, Inc. and Loadmaster Engineering, Inc. are separate corporations which manage and control their own affairs. Each of these companies has its own separate identity, but in advertising and in our brochures we may sometimes use the word "Loadmaster". The use of such term is for convenience only and is not intended as an accurate description of corporate relationships.

We strive to maintain our high reputation by producing drilling control systems and solutions to improve and maintain critical work environments in the Drilling industry. We provide a variety of products from variable frequency drives (VFD), programmable logic controllers (PLC), dynamic breaking systems, mud pumps, and other electrical components for your drilling applications.

Our 20,000 sq.m production facility in China has designed and manufactured solely quality and specialty pumps for oil exploration and refinery sin1992

GNSB Series Centrifugal pump is a very common device used at drilling mud solids control system. GNSB Series Centrifugal pump can be used for oil field drilling mud system, HDD and CBM drilling mud recycling system, piling and micro tunneling desanding plant. GN Solids Control is a professional manufacturer of centrifugal pump in China.

1. GNSB Series Centrifugal pump can be used as trip pump in the trip tank of the oil and gas drilling mud system. Trip tank is normally the first tank compartment inside drilling mud solids control system. The tank volume of trip tank is not big. It can be a separate smaller size tank other other tanks in the solids control system. It can also a compartment divided from shale shaker tank. Centrifugal pump size 3×2 or 4×3 are mostly used as trip tank trip pump.

2. GNSB Series Centrifugal pump can be used as feed pump for desander, desilter, mud cleaner. The pump transfer capacity should be matching the handling capacity of desander, desilter and mud cleaner. It can be a little big higher than the separation equipment, but it cannot be too much high. And the centrifugal pump transfer capacity cannot be lower than the separation equipment.

3. GNSB Series Centrifugal pump can be used as mixing pump of jet mud mixer and mixing unit. While add a T-pipe at the outlet of the mixing pump, the same pump can also be used as transfer pump.

4. GNSB Series Centrifugal pump can be used as transfer pump to transfer drilling mud or other slurries from one tank to another, or from one location to another.

All GN model centrifugal pump use tungsten carbide mechanical seal, with international famous brand Bearing. And spare parts interchangeable with most of the international Brand pump which helps customer to source spare parts easily. Open impeller design that lowers axial thrust loads, and make it easier for installation, repair and maintenance.

Bentec developed the idea of mud pumps completely new. The mud pumps are equipped with a direct-drive gearbox, a motor developed in-house, and stateof- the-art pump housing. There is no longer any need for an internal gear with all of its disadvantages today, and no more belt tensioning. Bentec mud pumps are reduced to the task they are made for – pump operations.

Bentec mud pumps are light-weight and have a small footprint. The 1,600 hp AC-powered motor is top-mounted. The pump is available with 5,000 or 7,500 PSI fluid ends and all of its parts subject to wear and tear meet API standards and are available worldwide. A handling crane makes it easy to handle the fluid end components.

Furthermore, Bentec uses patented liner and valve clamping technology to reduce the maintenance time significantly. A quick-change liner and piston system serves for easy maintenance. A special feature of the Bentec mud pump is the side-mounted gear drive.

This design eliminates the need for any chain or belt tensioning systems. The two-stage helical gear feeds directly into a forged/welded crankshaft, which is balanced and provides quiet and vibration-reduced operation.

Liner cooling and gear oiler systems are included; a supercharge pump and a noise reduction package can be installed upon request. Especially for noisesensitive environments like offshore or densely populated locations, the Bentec mud pump is the right choice.

Along with the supply of mud pumps, Bentec acts as a system supplier. Pumps can be delivered together with a Bentec Power Control System and the Bentec Soft Pump System.

Tratec is an experienced supplier of service and competence within drilling control systems, human machine interface, and software. We can provide service, recertification, installation & testing, commissioning, upgrades & modifications, parts, and technical support on your drilling control system and software.

Our sought after specialist control system engineers typically have their background from drilling equipment OEMs, holds the highest level of training, certifications, education, and deliver services of the highest quality. The service rate level for control system engineers from Tratec can lead to considerable cost savings for rig companies compared to going through OEM.

Tratec has supplied control system and PLC services and components to several European based rig and offshore companies. References include COSL Drilling Europe, Maersk Drilling, Siem Offshore, Caspian Drilling Company, Odfjell Drilling, KCA Deutag and several others. The rigs, service, and recertification projects have been classified by DNV or ABS.

Tratec is an experienced specialist total supplier of overhaul, recertification, control system service, parts and service for rig and drilling equipment. We can provide Norwegian quality and decades of experience, while maintaning sensible prices and flexible solutions.

Tratec have delivered solid cost savings to our customers on identical cylinders and parts. This is due to our lower cost base, system for compatible parts, and utilizing our experienced drilling equipment employees at very competitive rates.

Tratec can supply control system service compatible with the following equipment makers and trademarks: National Oilwell Varco (NOV), MHWirth, Aker, National, Hydralift, Wirth, Cyberbase, Drillview, and others. Tratec is an independent supplier of drilling equipment parts. Tratec is neither a licensee, nor is affiliated with any of the named original equipment manufacturers (OEM). The manufacturer’s names, equipment names, or trademarks used herein are solely for identification purposes, and are not intended by Tratec to cause confusion as to the source, sponsorship, or quality of the parts supplied by Tratec. The original equipment manufacturers named above and throughout this website do not sponsor, promote, warranty or endorse Tratec’s supply of services or parts.

Mud pumps are akin to the heart, they are key equipment in oil and gas drilling that pumps and circulates the drilling mud. As a key player in the manufacture and sales of oilfield equipment, we have a complete range of triplex mud pumps with compact design, reduced carbon emission, and improved performance.

Our classes of onshore and offshore mud pumps range from 450 to 2,200 hp diesel or electric (AC or DC) powered with 3000 to 5000 psi ratings. We design our mud pumps to match different rig types, work optimally and safely both onshore and offshore.