mud pump technology made in china

The Made-in-China F series mud pumps have same reliable quality and performance as other USA products. Now, F series mud pumps (from F-500 to F-2200) have been produced in batches and sold to many abroad oilfields. Your order for F series mud pumps is cordially welcome.

Huaxin"s export-orientated mud pump parts, including liners, pistons, piston inserts, valve inserts, oil seals, rod packing, fluid ends etc. All of them meet or exceed DIN and API standards and have been exported to U.K., Germany, USA, Canada, Pakistan, Middle East, and so on.

6 inch Diesel Engine Mud Pump Connected By Clutch Belt 1) 6 inch D iesel engine mud pump specifications DIESEL ENGINE MUD PUMP QUOTATION Model of Diesel pump set V115DPD05H ( H=43m) Model Diesel Engine R6105ZDS Brand RICARDO Rated Output 84KW/115HP Speed 1500rpm Displacement 6.49L Bore/stroke 105*125mm Compression ratio 16:1 Cylinders 6 Type Water cooled, inline, 4 stroke, direct injection Clutch RX-120 Model Pump VS100J-36A Treated Water Mud pump The Sand Maixmum diameter 30mm Outflow 245m3/h Head lift 43m Speed 1480rpm Shaft power 45kw Suction lift 3.0m Inlet diameter 150mm (6 inch) Outlet diameter 150mm (6 inch) Impeller and expeller High Chrome Alloy Shaft 45#steel Casing HT200 Volute casing High Chrome Alloy Control System Display and protect oil pressure,speed, water temperature,oil temperature. 2) Picture of 6 inch diesel engine mud pump 3) We also produce connection flange, elbow, foot valve, black spiral rubber pipe, and quick coulping, the range from 3 inch to 32 inch 4) Our Factory Picture 5) Any requirements about diesel water pump, pls contact with me, i will choose the best solution for you

In oil drilling, high-pressure mud pump is the heart of drilling platform, and wear resistant cylinder liner is the main vulnerable part of mud pump. It need to withstand working conditions of high pressure, high wear and strong corrosion. At present, the mud pump cylinder liners are mainly bimetal cylinder liners and ceramic cylinder liners. The lining of the bimetal cylinder liner is made of high-chromium cast iron metal materials, the lining of the ceramic cylinder liner is made of alumina or zirconia structural ceramic material.

Lake Petro provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

Ceramic Liners are made of a ceramic inner sleeve and a forged steel outer shell. The service life of ceramic liners is about 4000 to 10000 hours, the minimum time is at least 2000 hours, which is a lot more than bi-metal liners. Because of the phase transformation toughen technology, the ceramic liners have the features of wear-resistance, erosion-resistance, high-pressure-resistance, high hardness and strength. Zirconia type and Alumina type are common type of ceramic sleeve. Compared with Alumina type, Zirconia type liners have better toughness properties and a much longer service life. Piston wear and water consumption for lubrication can be reduced as well.

All Lake Petro liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let Lake Petro be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.

◆ January 18, 2004, Baoji City Administration for Industry and Commerce High-tech Zone Branch to Baoji Aerospace Power Pump Co., Ltd. issued a "corporate business license."

◆ February 18, 2004, the former deputy general manager of the original aerospace science and technology group Jin Zhuanglong and the original Baoji City Party Committee Secretary Yao Yinliang, the company set up the opening ceremony for the company unveiled.

◆ July 9, 2004, the company developed and produced XJ-type washing pump, ZB600-type mud pump, YL-type fracturing pump through the identification of new products, scientific and technological achievements.

◆ September 4, 2004, by the Provincial Science and Technology Agency identified as Shaanxi Province, "high-tech enterprises", after two consecutive first through the high-tech enterprise review.

◆ June 2, 2010, Shaanxi Aerospace Power High-tech Co., Ltd. with the right to apply for placement. The rights issue to the Baoji Aerospace Power Pump Co., Ltd. expansion of industrial pump production line project funds 80 million yuan.

◆ November 18, 2010, Henan Polytechnic University, Chongqing mining system management and technical personnel to my company on the coal fracturing pump and control system for technical exchanges.

◆ April 16, 2011, General Manager Guo Gaojian Assistant General Manager Assistant Technology Promotion Center Director Luo Wanjun, deputy chief engineer to promote the technical center deputy director Wang Yu group went to Daqing Oilfield and Daqing Oilfield related leaders, technical staff to meet and exchange.

◆ July 5, 2011, Shaanxi Aerospace Power High Technology Co., Ltd. The fourth board of directors decided to my company to 30 million yuan to implement the implementation of our company"s industrial pump production line technological transformation projects.

◆ March 24, 2012, "automatic remote control coal mine fracturing pump", "NB three-cylinder tailings filling mud pump (3NB200)", "3ZB90-type water injection pump" three new products through new products Identification of scientific and technological achievements.

◆ November 8, 2012, the new product BYW1458 / 40, BYW1100 / 50 coal mine fracturing pump group made the National Mine Product Safety Center issued the "mine product safety signs certificate."

◆ the end of 2012, the company was in Shaanxi Province, the Office of Science and Technology, Science and Technology Department, the Office of Finance, the IRS, the Inland Revenue Department, Xi"an Customs identified as "provincial enterprise technology center."

◆ 2015, "large flow reciprocating water injection pump" was listed as the provincial Shaanxi Province in 2015, the provincial military special support fund project.

◆ 2016 years, the company"s new products, "oilfield efficient fracturing flooding foam pump group" by the Provincial Science and Technology Department as the Shaanxi Provincial Science and Technology Program (research program) project.

◆ 2016, 5ZB series of water injection pump for the "brand-name products in Shaanxi Province", "BJB" trademark application for the famous brand, the city well-known trademarks.

Function: Mud Pump Liner also called the cylinder liner. The cylinder liner is the core accessory of the mud pump, which has the functions of storing mud, bearing pressure and completing the suction and discharge of mud. Because the cylinder liner is in direct contact with the mud, it is easy to be worn and corroded by the tiny sand particles, acid and alkali liquid in the mud during work. As a result, the inner diameter of the cylinder liner becomes larger, leakage occurs in the seal between the cylinder liner and the piston, and the pressure is reduced. The cylinder liner is scrapped eventually. Cylinder liner is a one-time wearable part that cannot be reused, and its life span directly affects the normal operation and cost of the drilling operation.

The piston assembly is one of the main parts of the hydraulic end system of the mud pump, and it is also one of the vulnerable parts of the drilling work. The discharge pressure of the mud pump is generated by the reciprocating linear movement of the piston assembly in the piston.

Polyurethane rubber has excellent oil resistance and wear resistance. The working temperature is not higher than 120℃, which is suitable for oil-based mud with working pressure below 35Mpa and working environment with high sand content.

Lake Petro has over 10 years of experience in Liners and Pistons, we export a large amount of mud pump parts to many countries and regions in the world. If you are interested in any of our products, please contact sales@lakepetro.com.

Our 20,000 sq.m production facility in China has designed and manufactured solely quality and specialty pumps for oil exploration and refinery sin1992

Triplex: This mud pump is used for drilling applications needing high pump pressure. This model works by decreasing the working fluid volume being discharged to generate pressure for producing the flow. There are three pistons in the triplex pump, with the middle piston generating more pressure on the crankshaft. High piston load can lead to excessive pressure and crankshaft failure if the components are not properly sourced.

Quintuplex:Quintuplex mud pump is perfect for pumping fluid at the time of drilling operations. It works as a continuous duty return piston. This is used in terms of its external bearings to provide crankshaft support to ensure the proper functioning of the sheaves.

Duplex: These mud pumps ensure that the mud circulation reaches the well"s bottom from the mud cleaning system. Duplex pumps have binocular floating seals as well as safety valves.

Saigao offers high-quality OEM mud pump spares, consumables, expendables and spare parts. Our mud pump parts are made with the highest standards of quality, offering competitive pricing and exceptional durability.

For the successful execution of your projects, it is important to find an appropriate company with a good track record. We help you in connecting with the top mud pump manufacturers and companies and get the best quotation.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

Yes. We help you find the best mud pumps irrespective of your location. We simplify your search by connecting you with top mud pump manufacturers and mud pump companies in your location, according to your budget and business requirement.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

The different parts of a mud pump are Housing itself, Liner with packing, Cover plus packing, Piston and piston rod, Suction valve and discharge valve with their seats, Stuffing box (only in double-acting pumps), Gland (only in double-acting pumps), and Pulsation dampener. A mud pump also includes mud pump liner, mud pump piston, modules, hydraulic seat pullers along with other parts.

The wearing parts of a mud pump should be checked frequently for repairing needs or replacement. The wearing parts include pump casing, bearings, impeller, piston, liner, etc. Advanced anti-wear measures should be taken up to enhance the service life of the wearing parts. This can effectively bring down the project costs and improve production efficiency.