mud pump wear plate puller in stock

Drilling consumables such as mud pump systems and their components can drastically increase your uptime while reducing costs and health/safety/environmental (HSE) risks. To support your drilling needs, Forum’s patented P-Quip® mud pump system offers a single-source solution that integrates high-quality fluid end components for maximum longevity and performance.

With more than 20 years of successful operation in severe environments, P-Quip offers a proven track record for the lowest cost of ownership in the industry. As part of our commitment to quality, our mud pump parts use patented Banded Bore™ technology that significantly reduces stress concentrations and leads to longer module life.

LINER, 4-1/2″, CHROME IRON, FOR HOIST MPLINER, 4-1/2″, CHROME IRON, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1244388000000000001244388

LINER, 5-1/2″, CHROME IRON, FOR HOIST MPLINER, 5-1/2″, CHROME IRON, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1244390000000000001244390

PISTON BHG, 1.625 X 1.50, PLASTIC, PUMPPISTON BUSHING, 1.625 X 1.50, PLASTIC, F/HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1411483000000000001411483

BONDED PISTON, 4-1/2″, NBR, FOR HOIST MPBONDED PISTON, 4-1/2″, NBR, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317551000000000001317551

PISTON,4″K-SERIES REPLACABLE RUBBER COMPPISTON, 4″ K-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317544000000000001317544

PISTON, 4-1/2″, WEATHERFORDPISTON, 4-1/2″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317552000000000001317552

PISTON,5″B-SERIES REPLACABLE RUBBER COMPPISTON, 5″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317560000000000001317560

PISTON, 5-/2″ B-SERIES REPLACABLE RUBBERPISTON, 5-/2″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317568000000000001317568

PISTON, 6″ B-SERIES REPLACABLE RUBBERPISTON, 6″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317576000000000001317576

PISTON RUBBER,4″K-SERIES REPLACEMENT KITPISTON RUBBER, 4″ K-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317520000000000001317520

PISTON RUBBER, 4-1/2″, WEATHERFORDPISTON RUBBER, 4-1/2″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317522000000000001317522

PISTON RUBBER,5″B-SERIES REPLACEMENT KITPISTON RUBBER, 5″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317524000000000001317524

PISTON RUBBER, 5-1/2″, WEATHERFORDPISTON RUBBER, 5-1/2″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317526000000000001317526

PISTON RUBBER,6″K-SERIES REPLACEMENT KITPISTON RUBBER, 6″ K-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317528000000000001317528

HYD PULLER KIT LESS PULLER HEAD,MDL:E447HYDRAULIC PULLER KIT ( LESS PULLER HEAD) ASSY, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1241141000000000001241141

VLVGUIDE BHG, CARBON STEEL, WEATHERF/DVALVE GUIDE BUSHING, CARBON STEEL, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1259512000000000001259512

LINER RETAINER STUD, LONG, W/ 2 HHNSLINER RETAINER STUD, LONG, W/ 2 HHNS, F/ HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1230764000000000001230764

CROSS HEAD INSPECTION GASKET, F/HOIST MPCROSS HEAD INSPECTION GASKET, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230743000000000001230743

REAR COVER GASKET ( PER INCH),F/HOIST MPREAR COVER GASKET ( PER INCH), FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1248661000000000001248661

STABILIER BOLT AND WASHER, F/ HOIST PUMPSTABILIER BOLT AND WASHER, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1775203000000000001775203

HEX CAP SCREW, 1/2″-13 X 1-1/2″, CSHEX CAP SCREW, 1/2″-13 X 1-1/2″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236068000000000001236068

HEX CAP SCREW, 5/8″-11 X 2-1/2″, CSHEX CAP SCREW, 5/8″-11 X 2-1/2″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236076000000000001236076

HEX CAP SCREW, 1/2″-13 X 1-1/4″, CSHEX CAP SCREW, 1/2″-13 X 1-1/4″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236067000000000001236067

HEX CAP SCREW, 3/4″-10 X 3 CSSCREW, HEX CAP 3/4″-10 X 3 CS B18.2.1 ZN GR5 (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1236087000000000001236087

NUT, HEX 3/4″-10 UNC, PLATED STLNUT, HEX 3/4″-10 UNC PLATED STL NYLON INSR (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 0221052000000000000221052

CRANKSHAFT BEARING ASSEMBLY SHIM SETSHIM SET, CRANKSHAFT BEARING ASSEMBLY FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230726000000000001230726

DRILLED HEX CAP SCREW, 5/8″-11 X 1-1/2″SCREW, DRILLED HEX CAP 5/8″-11 X 1-1/2″ ALLOY B18.2.1 GR8 (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1386650000000000001386650

ROLLER BRG,9.843″ ODX5.512″ID 3.646 WDBEARING ROLLER 9.843″ OD X 5.512″ ID X 3.464″ WD SPHERICAL BRONZE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1236034000000000001236034

CRANKSHAFT BRG CARRIER,RH, F/HOIST MPCRANKSHAFT BEARING CARRIER, RH, F/ HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230683000000000001230683

BRG, 7.874″ OD X 4.331″ ID X 2.75″ WBEARING, 7.874″ OD X 4.331″ ID X 2.75″ WD FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1236018000000000001236018

HEX CAP DRILLED SCREW, 3/8″-16 X 1″, CSHEX CAP DRILLED SCREW, 3/8″-16 X 1″, CS, F/ HOIST MUD PUMP, MDL: E-447, WEATHERFORD , P/N: 1249114000000000001249114

PLATE NUT, CROSSHEAD GUIDE,F/ HOIST PUMPPLATE NUT, CROSSHEAD GUIDE, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230695000000000001230695

FRONT MOUNT FLUID END ASSY, F/ MUD PUMPFRONT MOUNT FLUID END ASSEMBLY, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1234427000000000001234427

DISCHARGE VLVGUIDE BHG, F/ HOIST PUMPDISCHARGE VALVE GUIDE BUSHING, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230774000000000001230774

FLUID END REAR DISCHARGE ASSY MUD PUMPFLUID END REAR DISCHARGE ASSEMBLY, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1885310000000000001885310

DISCHARGE VALVE COVER FLANGE, F/HOIST MPDISCHARGE VALVE COVER FLANGE, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1249942000000000001249942

O-RING, 65 OD X 3.1 CS HNBR,TRIPLEX PUMPO-RING, 65 OD X 3.1 CS HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1139167000000000001139167

DISC, VALVE, WFT T10 420, TRIPLEX PUMPDISC, VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, OLD P/N: 1372129, P/N: 1200282000000000001372129

SEAT, DISCHARGE VALVE, WFT T10 420SEAT, DISCHARGE VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372130, P/N: 1200271000000000001372130

O-RING, 60 ODX3.1 CS, HNBR, TRIPLEX PUMPO-RING, 60 OD X 3.1 CS, HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1141659000000000001141659

SPRING, INTERMEDIATE VALVE, WFT T10 304SPRING, INTERMEDIATE VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372132000000000001372132

CAGE, SUC VALVE, WFT T10 420,TRIPLEX PMPCAGE, SUCTION VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372133000000000001372133

PLUNGER,32MM,WFT T10 Ni60+WC,TRIPLEX PMPPLUNGER, 32MM, WFT T10 Ni60+WC, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265194000000000000265194

SLEEVE, GUIDE,32MM WFT T10AB,TRIPLEX PMPSLEEVE, GUIDE, 32MM WFT T10 AB, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265280000000000000265280

RING, PACKING, 32MMWFT T10 TEFLON/KEVLARRING, PACKING, 32MMWFT T10 TEFLON/KEVLAR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265273000000000000265273

O-RING, 70 OD X3.1CS, HNBR, TRIPLEX PUMPO-RING, 70 OD X 3.1CS, HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 773845000000000000773845

SEAT, SUC VALVE, WFT T10 420,TRIPLEX PMPSEAT, SUCTION VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 291217000000000000291217

CAGE,DISCHARGE VLV,WFTT10420,TRIPLEX PMPCAGE, DISCHARGE VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372126000000000001372126

O-RING, 45 OD X 3.1CS HNBR, TRIPLEX PUMPO-RING, 45 OD X 3.1CS HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1120428000000000001120428

SPRING, SEC VALVE,WFTT10 304,TRIPLEX PMPSPRING, SECTION VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 291218000000000000291218

SPRING, DISCHARGE VALVE, WFT T10 304,PMPSPRING, DISCHARGE VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1237269000000000001237269

G.D. TEE-BJA / TEE BFB : Valve assembly (PT. No. 200 PEE 482B) 5” stroke 3.1/2” triplex plunger mud pump spares : Valve body, valve, PU insert, washer, spring, spacer lantern, 3.1/2” Hardchrome plunger & packing set (60bu73)

Triplex plunger mud pump spares : Valve assembly complete (B-73991), fluid valve body, seat, polyurethane insert, self lock nut, spring are ready stock. 4” & 4.1/2” plunger (Hardchrome)

Dezhou Rundong Petroleum Machinery Co., Ltd is major in manufacturing oil drilling mud pump spare parts and drilling tools, in which liners, pistons and valves that developed new have got national patent certificate. Mud pump parts we manufactured can be totally exchangeable with spare parts from original manufacturer, and have excellent performance especially in drilling conditions of high temperature, high pressure, oil base mud, acid base mud and high sand content mud etc.

We have been committed to continuous optimization and upgrading of drilling mud pump products.We accumulate rich first-hand technical information through our service to drilling projects, for example different material products’ performance under different drilling conditions. Our aim is to make products manufactured can be more suitable for oilfield drilling needs, and our goal is where there is oil, there is Deshi Brand products.

Main advantages of the mud pump consumables that we manufacturedProducts are produced according to ISO9001 quality system,APISpec7K standard, and each process can be tracked, recorded and traceable

Import spare parts such as valve module, crankshaft, pinion shaft’s material are high quality alloy steel,The power end herringbone gear adopts the grinding process, the gear precision is high, the processing precision of the matching components is much more higher, which can make the whole mud pump can run more smoothly.

Mud-Pump Gear Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Piston Rod, Extension Rod, Stud & Nut, Piston Assy, Piston Cup (Rubberized), Clamp for extension rod, Liner 5” to 7.1/2”. With Liner Gasket. Liner Adopter, Liner Wear Plate, with gasket, Rod Wiper & Spring are ready stock. 3-Jaw Valve Seat Puller.