mud pump wear plate puller factory

Mud pump wear plate is the main component in the drilling pump fluid end system. It is installed on the inner side of the cylinder and plays the locating role for mud pump cylinder.

It is forged from 35CrMo. The wear-resistant discs manufactured by our company have high hardness and nickel-plated surface, which has good wear resistance and corrosion resistance.

The driving device realizes the valve opening and closing by rotating the valve disc by a certain angle through the valve stem and the rocker arm. The sealing surface of the valve disc is closely fitted to the valve seat by means of a spring. The valve disc is displaced in the vertical direction of the sealing surface. This helps to compensate the deformation of the valve parts caused by thermal expansion and contraction and the slight wear and tear caused by multiple opening and closing, overcomes the impact of any back pressure changes on the seal and prevents particulate media from entering between the sealing surfaces; During the closing process, the difference in friction between the valve seat seal and the valve disc in the tangential direction causes the valve disc to rotate during an opening and closing cycle and can continuously cut and clean. It may accumulate in the valve cavity during the process These characteristics of the medium are not found in other valves.

The sealing surface of the valve seat adopts an open structure. The valve disc will agitate and remove the medium during each action process, avoiding the accumulation of internal materials that often occur in other forms of wear-resistant valves; the changing circulation pipe space makes the flowing materials vortex Generates self-cleaning effect, avoids the corrosion and damage caused by the accumulation of materials inside the valve body, and maintains the valve in a good seal. Compact structure and easy installation

The valve disc and the valve disc are metal-to-metal hard seals. The sealing surface is made of nickel-based and cobalt-based hard alloys as a whole, with high hardness, corrosion resistance, oxidation resistance, high temperature resistance, suitable for corrosion and wear resistance at high temperature Wide temperature range.

Manufacturing utilizes the latest technologies to produce accurate and uniform parts. All products offered are either OEM or completely interchangeable. All fluid end accessories are available for most triplex and duplex mud pumps.

Mud-Pump Gear Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13