oilwell a1700pt mud pump free sample

Since the NOV A1700-PT Triplex Mud Pump was built approximately 60 years ago, the industry has widely accepted the three cylinder or triplex style pump. Triplex mud pumps are manufactured worldwide, and many companies have emulated the original design and developed an improved form of the triplex pump in the past decade.

NOV A1700-PT Triplex Mud Pumps have many advantages they weight 30% less than a duplex of equal horsepower or kilowatts. The lighter weight parts are easier to handle and therefore easier to maintain. The other advantages include;They cost less to operate

One of the more important advantages of triplex over duplex pumps, is that they can move large volumes of mud at the higher pressure is required for modern deep hole drilling.

NOV A1700-PT Triplex Mud Pump is gradually phasing out duplex units. In a triplex pump, the pistons discharge mud only when they move forward in the liner. Then, when they moved back they draw in mud on the same side of the piston. Because of this, they are also called “single acting.” Single acting triplex pumps, pump mud at a relatively high speeds. NOV A1700-PT Triplex Mud Pump has three pistons each moving in its own liner. It also has three intake valves and three discharge valves. It also has a pulsation dampener in the discharge line.

A wide variety of national oilwell mud pumps options are available to you, You can also choose from new, national oilwell mud pumps,As well as from energy & mining, construction works , and machinery repair shops. and whether national oilwell mud pumps is 1.5 years, 6 months, or 3 months.

The Double angle O-ring valve is made with a tough one-piece body to run more hours between change outs. It’s made with carburized premium alloy steel to resist wear, provide a positive seal, and help protect against wash out or damage to the pump.

NOV 12-P-160 Mud Pump is rated at 1600 input horsepower (1193 kw) at 120 strokes per minute, with a 12-inch (304.8 mm) stroke. Multiple liner sizes allow pressures and volumes to handle circulation requirements in deep drilling applications.

Flexibility: Compact engineering provides higher efficiency in less space. The NOV 12-P-160 Triplex Mud Pump light weight and flexible design make it easily adaptable to a variety of rig configurations. This provides flexibility as drilling requirements and conditions change.

Fluid End Modules: NOV offers a choice of fluid end modules and valve covers for every P Series pump model to select the fluid end module that exactly matches drilling requirements. All pump models can be equipped with either the standard or premium forged, two-piece interchangeable fluid modules

The Oilfield Equipment related post NOV 12-P-160 Triplex Mud Pump Used [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

The F Series mud pumps can meet the requirements of the same manufacturing technique and quality level as those of F series mud pumps of EMSCO, IDECO, GARDNER DENVOR, OILWELL etc. Now, F series mud pumps (from F-500 to F-2200) have been produced in batches and sold to many abroad oilfields. Your order for F series mud pumps is cordially welcome.

We export-orientated mud pump parts, including liners, pistons, piston inserts, valve inserts, oil seals, rod packing, fluid ends etc.. All of them meet or exceed DIN and API standards and have been exported to U.K., Germany, USA, Canada, Pakistan, Middle East, and so on.

DESCRIPTIONLINERREFER TO GUIDE TO ORDERING CHART ON PG. 6 FOR TYPE (G); (Y); AND FOR BORE SIZE (XX)LINER GASKET(REFER TO GUIDE TO ORDERING CHART FOR TYPE AND SIZE (XX)WEARPLATEWEARPLATE GASKET (ALSO AVAILABLE IN URETHANE P# 2974-1U)PISTON(REFER TO GUIDE TO ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY)PISTON BUSHING(FROM 1-5/8 TO 1-1/2 STRAIGHT BORE)PISTON SEALPISTON ROD (WITH 1 -8 ELASTIC STOP NUT)PISTON ROD NUTPISTON ROD CONNECTING STUD(WITH WATER HOLE)SUB RODROD CLAMP(WITH WATER JACKET)HOSE (1/2 X 30 WITH 1/2 MALE X 3/8 MALE CONNECTIONS)PIPE (3/8 X 12 GALVANIZED AND THREADED ON ONE END)BOLT (5/8-11 GRADE 8 BOLT WITH LOCK NUT AND WASHER)PONY RODVALVE COMPLETEVALVE INSERTVALVE SPRINGVALVE SEATHYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION IN CATALOG)SOUTHWEST HP QUICK-CHANGE VALVE COVER ASSEMBLY: (QTY PER ASSY CONSISTS OF ITEMS 17-24)VALVE COVER FLANGESCREW GLANDPLUG (COMPLETE WITH VALVE GUIDE; BUSHING; AND SCREWS) INCLUDES ITEMS 21, 22, & 23HP VALVE COVER PLUG NITRILE SEAL(ALSO AVAILABLE IN URETHANE SEAL USE P# P129U)VALVE GUIDE (COMPLETE WITH BUSHING #4700I)VALVE GUIDE BUSHING (ALSO AVAILABLE IN URETHANE P# 4700IU)VALVE GUIDE SCREWVALVE COVER STUD (WITH SW PART# HHN1250-7 1 -7 HEAVY HEX NUT)OILWELL VALVE COVER ASSEMBLY: (QTY PER ASSY CONSISTS OF ITEMS 22, AND ITEMS 25-28)VALVE COVER

v Also Maintaining All Rig Assets Such As Cranes, Life Boats, Bulk Cement Tanks, Bulk Mud Tanks, Life Rafts,Co2 System, Fire Extinguishers, Skidding System, Jacking System, Void Tanks, Bilge System, STP, OWS, Loading Stations, Anchor Winches, Loose Gears, WTDS, Hatches, Safety Equips. SCBA.

· Reconditioning of pump motors, sump pumps, shale shakers, agitators, centrifugal pumps, wire drawing machines, hydraulic pump motors, lightning circuits, water well pumps etc.

Mid Career Hire (Chief Engineer) Day to day Maintenance on all equipment. Repairs & rebuilding of pumps and all drilling associated equipment. Manufacturing and machining of parts.

Day to day Maintenance on all equipment. Repairs & rebuilding of pumps and all support systems such as water purification and breathing air compressor. Manufacturing and machining of parts on Lathe, Milling and general workshop machines. Design and drawing parts for manufacturing, purchasing and training purposes.

Crane Maintenance and repairs. Maintenance and repairs on Crude oil separation plants, bull heading pumps and Crude oil transfer pumps. Repairs, replacement, modification and rebuilding of various types of valves. (Mechanical, Electrical and Pneumatic)

Mechanical/Diesel Technician Day to day Maintenance on all equipment. Repairs & rebuilding of pumps valves and all life support equipment. Manufacturing and machining of parts. Service and maintenance on all cranes. Maintenance and repairs on Natural Gas separation plants and transfer systems.

· Assist the Tool pusher daily to perform activities, ensure all timesheets filled for drilling crew, Supervises and coordinates activities of workers engaged in drilling oil and gas wells in area consisting of one or more well sites: Directs workers to erect, dismantle, and move drilling rigs, and drilling crews in setting up and operating power units, draw works and other drilling equipment, Plans delivery of drilling tools, fuel, water, and other supplies for use at drill site. Orders type of drilling bits to be used, according to type of strata encountered. Directs workers in mixing drilling mud and circulating mud in borehole, and in use of special drilling mud to prevent blowouts from gas pressure.

SAPESCO. Drilling & Work Over Co. Syria: working as Assistant Driller position. hand disk Brake & Kelly Drive Draw work capacity 1500 HP. Mud pumps 1600 HP also Triplex in Rig# 4 in Syria From 2012 till now

SAPESCO. Drilling & Work Over Co. Syria: worked as Derrick man hand disk Brake & Kelly Drive Draw work capacity 1500 HP. Mud pumps 1600 HP also Triplex in Rig# 4 in Syria From 2007 till 2008

Operates pump, rotary table, and draw works controls to drill ahead, change bits, run casing or tubing, run finishing or testing tools, change blowout preventer, install well-head equipment or to accomplish other work required in the rotary drilling process

Determines down the hole conditions by close observation and interpretation of mud weights, circulating pressures, pit levels, penetration rates, drilling string weights, drilling string torque, etc. and takes action as indicated.

Prepares tour report of drilling activity showing footage made, drilling, dead or lost time, and other work performed, including repairs made to mud pumps and other non-motive rig equipment.

* Receives and follows up Driller’s instructions for the repair and maintenance of various drilling equipment such as mud mixer, shale shaker, distiller and de-sander to ensure trouble free operations.

Back to Mud Pump Spares : National A1700-PT Triplex Pump Parts : American Oil Tools sales high quality OEM style aftermarket mud pump parts for the National Oilwell

Ameriprise Financial downgraded National-Oilwell Varco (NYSE: NOV) from Buy to Sell. For an analyst ratings summary and ratings history on National-Oilwell Varco

We, Qingdao Hongbo Petroleum Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:

Qingdao Hongbo Petroleum Machinery Co., Ltd. (HB) specializes in manufacturing and developingmud pump fluid end expendables for customers worldwide. HB’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, HB’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, andhave been accepted domestically and internationally.

As one of HB’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. HB’s established Quality Control System and experienced expertise ensurethe best product quality and service.

Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..

Qingdao Hongbo Petroleum Machinery Co., Ltd. (HB) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. HB’s products have equivalent quality with those of OEM and are produced for direct replacement for brand mud pumps including but not limited to EMSCO, Gardner-Denver, National, Oilwell, IDECO, Skytop Brewster, OPI, Wirth and Wilson. With a large range of specifications, HB’s high quality products have been successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.

As one of HB’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. HB’s established Quality Control System and experienced expertise ensure the best product quality and service.

Hy-chrome Mud Pump Liner (Bimetal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3-web or 4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and

This is Isacc of China Qingdao HNA Oilfield Machinery Co., Ltd. We are a large drilling tools, mud pump and Fluid End Expendables and mud pump spare parts manufacturer in China.

Our plants are specialized in producing wide range of replacement parts and liners, Pistons, Valve and seats for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, Oillwell, OPI Skytop, etc. and other brand liners. All items are manufactured to API 7K quality standards.etc.

And we make cranskshaft, pinion shaft, crosshead assy for EMSCO F series mud pumps, GARDNER DENVER PZ-9, NATIONAL OILWELL 9-P-100, 10-P130 and 12-P-160 mud pumps.

Our F1000 mud pumps have good market in Canada, Mexico, Thailand and Middle East. And our mud pumps have approved by mud pump and insurance industry in Canada.

We specialize in triplex mud pumps and triplex mud pump parts and accessories. If need a quality triplex mud pump or accessory at competitive prices, contact us.

Our plants are specialized in producing wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.

Our plants are specialized in producing wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.

We, Dezhou Jiatong Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:

Dezhou Jiatong Machinery Co., Ltd. (JT) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. JT’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, JT’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.

As one of JT’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. JT’s established Quality Control System and experienced expertise ensure the best product quality and service.

Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..

Our company is one of the leading designers and manufacturers of triplex mud pumps and fluid end expendables of oilfield drilling machinery, offering top quality and competitive products for our clients all over the world. We adopt ISO9001 quality system and our products meet the API standard.

We have been engaged in manufacturing series of quality mud pumps and spare parts for oilfield machinery since early 1990s. The main products are sold to USA, Mid-Asia, Canada, Mexico, Middle East and Russia. The mud pumps are used in oil drilling and mining. We can supply series of mud pumps( like f-500, f-800, f-1000, f-1300, f-1600 and PZ series )and a full line of fluid end expendables for popular mud pumps in the world, including continental Emsco, National, Gardener Denver,Oilwell,Ideco,Wheatly,Wilson,Wirth,OPI,EllisWillianms,Skytop/Brewster, etc.

We, Dezhou Jiatong Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:

Dezhou Jiatong Machinery Co., Ltd. (JT) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. JT’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, JT’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.

As one of JT’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. JT’s established Quality Control System and experienced expertise ensure the best product quality and service.

Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..

We,Dezhou Jiatong Machinery Co., Ltd have been engaged in manufacturing and dealing in mud pump and related fittings in oil drilling fields ---------High frequency quenching liners and modules and so on. Most of our products are exported, and we have the power of self-supporting import and export.Our company’ s products design is fit for worldwide brand mud pumps, such as: Emsco, Gardner-Denver, National, Oilwell, Ideco, Skytop／Brewster, OPI, Wirth, Wilson, Gaso and so on. Our company owns lots of large-scale advanced equipment. Both Liners’ quenching technique and heat treatment technique are in the leading place in China. Every year we produce and sell about 10000 liners of various kinds in different sizes . Products meet the criteria and rule of API totally. Part of our products are produced directly for mud pump producers who are famous worldwide. The product is widely approved by the user communities in American, Canadian, Mexican, the Middle East, the Australian market for its fine quality and the best service。Our company mainly produces and sells the following products:

Also, we produce custom-made valves, seats, liners and other mud pump parts. Customs can choose needed products by yourselves, and we can help you choose suitable products if you provide us with mud pump models and practical drilling conditions in detail. We have specialists of our products serve for the customer track. What’ more, we may defer to the blueprint or the sample customers provide and carry on processing. Jiatong’ s staff whole-heartedly welcome customers everywhere to exchange cooperation with us.

Zibo Huachuang Fine Ceramics Co., Ltd.- is a new & hi-tech ceramic enterprise that specializes in manufacturing of ceramic sleeves and pistons of mud/oil pump with the excellent performances, such as wearing-resistance, erosion-resistance, high-temperature-resistance, high-strength, high-hardness in the working conditions on which metal and polymer ones can not do. They are widely used in MUD PUMP in the fields of petroleum, such as NATIONAL, OILWELL, IDECO, EMSCO, GARDNER-DENVER,FMC etc.

HNA is specialized in producing mud pumps and wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners. All items are manufactured to API 7K quality standards.

Our Products are designed to fit mud pumps of Emsco, Gardner- Denver, National, Oilwell, Ideco, Skytop/Brewester, as well as OPI, Wirth, Wilson and Gaso. Our products include Liners: Hy- chrome Mud Pump Liner, chrome-plated Liner, Hardened Steel Liner Valve and seat: Premium Cross Arms Valve and seat, Full open Valve and seat, Valve Spring Piston and piston rods; Long-life Bonded Piston with Rubber and Fabric, Long-Life bonded Piston with Urethane, Replacement Piston, Piston Hub, Piston Rod, Plate, Snap Ring Other parts: Crosshead, Upper and Lower Crosshead Guide, Extension Rod, Piston Rod Clamp, Threaded Ring, Linder End Cover, Valve Pot Cover, Valve Guide, Cylinder Head, Cylinder Head Plug, Cap, Linder Seal, Valve Cover Gasket, Cylinder Head Gasket and etc. Mud pumps: We can offer the F-650,F-800,F-1000,F-1300,F-1600 and PZ-9 mud pump.

We"re Dezhou Rundong Petroleum Machinery Co., Ltd., specializing in mud pump, fluid end. Our products mainly include valve seat and body, valve assembly, liners, piston, piston rod and other mud pump parts.