thick mud pump factory

Distributor of heavy duty submersible mud, sand, sludge & slurry pumps. Specifications of pumps include 5 hp to 30 hp motor, three phase, 208 V to 575 V, 6.8 A to 39 A, 3 in. to 6 in. NPT sizes, 38 ft. to 134 ft. head size & 475 gpm to 1,690 gpm flow rate. Features include impellers, wear plates & agitators made from abrasive resistant 28 percent chrome iron, process hardened ductile iron volutes casted with thick walls, class H motor insulation, double silicon carbide mechanical seals, heavy duty lip seal & stainless steel shaft & shaft sleeve. Sand, sludge & slurry pumps are used in mines, quarries, dredging, coal & ore slurries, sewage treatment plants & steel mills. UL listed. CSA approved. Meets OSHA standards.

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

Our high-head pumps are specially designed for industrial and commercial applications where high heat and high pressure are required. Whether you need to pump water, chemicals, or other liquids over long distances, our high-head pumps are up to the task.

The unique design of our high-head pumps allows them to generate high head and pressure while still maintaining a high flow rate, making them ideal for a wide range of applications including irrigation, water treatment, and industrial processing.

Our high-head pumps are also highly customizable, with a variety of options available to suit your specific needs. Whether you require a high flow rate, a high head, or a combination of both, our team of experts can work with you to create a pump that meets your requirements.

EDDY Pump Corporation is a pump and dredge equipment manufacturer. Engineering along with R&D are done on site also. Since 1984, we continue to innovate and bring our clients the most breakthrough patented technology and service the industry has to offer.

We are a USA-based dredge and pump manufacturer working with the following Industries: US Navy, Oil & Gas, Mining, Wastewater, Paper/Pulp, Fracking, Chemical, Sand & Gravel, Marine Dredging, Heavy Construction and others. Read More..

Continental Emsco Drilling Products, Inc., which consisted of Emsco drilling machinery and Wilson mobile rigs, was purchased by National-Oilwell, Inc on July 7, 1999. To our knowledge, no pumps have been manufactured and sold under the Emsco brand name since National-Oilwell acquired them.

Fairbanks Morse pumps are currently manufactured in Kansas City, Kansas. Fairbanks Morse is a division of Pentair ever since August, 1997 when Pentair purchased the General Signal Pump Group.

Gaso pumps are manufactured by National Oilwell Varco. Gaso was acquired as "Wheatley Gaso" by National-Oilwell in the year 2000. At the time, Wheatley Gaso was owned by Halliburton.

Skytop Brewster pumps are no longer available as new pumps. Skytop Brewster(Cnsld Gold), a unit of Hansen PLC"s Consolidated Gold Fields subsidiary, was acquired while in bankruptcy by National-Oilwell, Inc. in November, 1999.

Whether you’re transferring waste oil mixtures, bio waste, sewage, mud or lime slurries, there’s one thing you can be sure of, and that’s that you need a heavy duty, high pressure sludge pump. Capable of efficiently handling viscous fluids containing solids, Castle Pumps’ range of slurry pumps has been built up over the years to provide you with a non-clogging solution to your waste transfer applications. Not all pump designs can do the job, but that’s where we are there to help you. Our technical sales engineers are on hand to help you to select the right solution for your requirements.

Agitator series submersible pump designed for slurry, mud & sand pumping with hard iron adjustable wear parts & bottom side discharge up to 6-inch size.

Constructed for maximum durability, our dewatering pumps are compact and lightweight, built with the contractor in mind. Trash pump with 2", 3" and 4" designs with Honda GX engine.

Constructed for maximum durability, our dewatering pumps are compact and lightweight, built with the contractor in mind. Centrifugal pump with 1", 2", 3" and 4" designs with Honda engine.

Sludge pumps and slurry pumps are designed to pump large amounts of water that contains hard and soft solids such as mud, leaves, twigs, sand, and sludge.

Most Sludge pumps and slurry pumps are portable, heavy-duty centrifugal pumps that feature deeper impeller vanes and larger discharge openings than other pumps. Sludge pumps and slurry pumps, which are capable of processing materials with suspended particulates that would clog other centrifugal pumps, can move hundreds or even thousands of gallons per minute.

Submersible sludge pumps are, as the name suggests, designed for pumping liquids with a high sludge content. These are single casing pumps with vortex impellers and specially designed pump housings providing a large free passage through the pump. Submersible sludge pumps offers solid handling capability with free flow vortex hydraulic – a perfect alternative for professional dewatering.

The DAE Pumps Submersible Drainage Pumps support a variety of dewatering applications. Their robust design provides the highest level of performance, reliability, and ease of use. The submersible drainage pumps offer a range of sizes up to 10-inches with over 80 HP and a volume capability of pumping as much as 6100 GPM.

Submersible Sludge Pumps are peak performers in pumping thick mud, clay, and waste. These energy-efficient pumps run at low horsepower, pumping as much as 420 GPM. Available in 3-inch and 4-inch sizes, the heavy-duty DAE Pumps Submersible Sludge Pumps are capable of moving abrasive solids as large as 2-inches. Our Submersible Sludge Pumps provide the support you need for for your toughest jobs.

The DAE Pumps Submersible Slurry Pumps are the toughest and most durable submersible pump. Built for pumping the worst slurry and materials, these pumps have the highest rating in ruggedness. Our Submersible Slurry Pumps are made for dredging the most abrasive media with high solid content in quarries and mining operations. With up to 102 horsepower, these powerful unit are capable of moving 2112 GPM of solids as large as 2.5-inches, and are available in 3-inch, 4-inch, 6-inch, and 8-inch sizes.

The DAE Pumps Payload Electric Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Payload Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

The DAE Pumps Hydraulic Submersible Slurry Pumps are the industry’s best-performing hydraulic submersible pumps. Capable of pumping up to 1325 GPM our hydraulic pumps provide the reliability you need. Because these 3-inch and 4-inch pumps are compact, their lightweight design makes them necessary tools for all site operations. They are non-clogging and are also available in a high head performance of up to 350 feet

The DAE Pumps Hauler Hydraulic Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Hauler Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

DAE Pumps is committed to providing you with the highest quality of pumps at affordable prices. We build our submersible pumps with you in mind. We use the strongest material inside and out to withstand the harshest conditions for getting the job done. Over the years, we built a modular platform of submersible pump that allows us to provide the highest performing pump with the same durability and reliability from one size and power to the next. This means you get the best pump each time.

Our low-cost submersible pump lines are an extension of our commitment to affordably priced pumps. These pumps are built with the same types of metal inside and out as our modular lines, but use a different technology design that brings the performance of these pumps close to those of the other models. We offer these pumps with a lower guarantee so you can get very high-grade pumps at the best prices.

Submersible pumps are the industry’s most durable pumps for underwater operations moving solids and liquids. They can withstanding everyday use of processing water, rocks, sand, mud, sludge, slurry, and other abrasive materials. DAE Pumps provides a variety of submersible pumps for mining, dredging, minerals processing, ash pumping, wastewater, dewatering, and pumping chemicals, oil, sludge, paste, and many other applications. We offer light-duty to heavy-duty submersible drainage pumps, submersible sludge pumps, and submersible slurry pumps.

The submersible drainage pump is built for general dewatering, groundwater, raw water, and construction site use. Construction companies and various municipalities use drainage pumps for removing water from heavily flooded areas and as sump pumps when rainwater or groundwater collects in low-lying and below ground work areas.

DAE Pumps drainage pumps are designed for flexibility and ease of use.  Capable of pumping solids up to .5-inches, the durable design is made to move large amounts of water. DAE Pumps drainage pumps handle clean and dirty water with the best performance and efficiency on the market. Our drainage pumps provide powerful performance with minimal maintenance, and their durable body ensures continued use in harsh environments. We offer a variety of drainage pumps in 3-inch, 4-inch, 6-inch, and 10-inch discharge outlets with a horsepower of over 80 HP, and capable of pumping up to 6100 GPM.

Made to pump thick mud and other similarly viscous mixtures of liquids and solids, submersible sludge pumps are used for moving sludge or light slurry, tank clean-outs, trench and pond cleaning, mining dewatering operations, and various other applications. The sludge pump moves the material that can clog ordinary drainage pumps.

DAE Pumps heavy-duty sludge pumps can move water, but they are made for moving solid material and are built with a high wear resistance inside and out. The high-chrome (55HRC) impellers and base of the pump ensures stability while allowing the passage of large solids. The high-quality components for the mechanical seal guarantees a watertight seal and trouble-free operation. Our submersible sludge pumps move up to 420 GPM and come in multiple sizes and power options. These sturdy sludge pumps provide the reliability you need and the performance you can trust for your dewatering, cleaning, and transferring needs.

The submersible slurry pump is the catch-all of submersibles. Capable of pumping the most abrasive media with high solids content, the slurry pump is the workhorse for quarries and settling pond operations. These ultimate pumps are used for everything from dewatering to dredging.

DAE Pumps non-clogging submersible slurry pumps provide the ultimate in toughness.They have the largest apertures to facilitate the handling of slurry with the most challenging solids and the high-efficiency high chrome agitator can lift settled solids up to 2.5-inches. The robust design uses heavy-duty bearings to withstand shocks and overloads and a double silicon carbide mechanical seal for duty application. Our slurry pumps are available in 3-inch, 4-inch, and 6-inch models, with the ability to move up to 2112 GPM.

Sand is one of the most abrasive materials for any type of pump to manage. The beating of sand on the impeller, volute, and even the hose cause extreme wear and tear on pump components. Thesubmersible sand pump is designed to minimize the effects of blasting sand. However, over a period of extended time, the submersible sand pumps will show signs of wear on these parts from the constant pounding of sand and will require replacement.

Our submersible sand pump wear components are built with a high chromium iron, an extremely strong alloy that is mainly used in mining, milling, earth-handling, and manufacturing industries which require materials with exceptional wear and corrosion resistance. The exceptional wear resistance of high chromium cast iron is due to the high volume fraction of hard chromium carbides. The toughness of the matrix also contributes to the wear resistance and makesit very suitable for pumping sand.

DAE Pumps non-clogging submersible sand pumps provide the ultimate in toughness and sand pumping capabilities. Ourpumps move up to 1664 gallons per minute of material and are available in 3-inch, 4-inch, and 6-inch models.

string(778) "Shredding Inefficiencies: Fahrenheit® RAD-AX® Technology Unclogs Utz Potato Chip Production. The Denver-based Condor Snack Company, owned by Utz Potato Chip Co., processes approximately 120,000 pounds of potatoes per day. Potatoes are delivered, washed to remove dirt, peeled, sliced, washed again, and then fried. Condor uses six different types of oils. Wastewater, debris, starch and the potato peels flow from floor drains into a sump. Equipment is cleaned weekly with 180o water and caustic beads to remove oils used in frying. This hot caustic liquid and oils flow into the sump and are added to the mix for a sump pump to remove. Clogged pumps halted production multiple times each shift. Read how Industrial Flow Solutions SKGF series pumps solved the problem."

string(879) "Boiler Blowouts: Renewable energy plant installs hi-temp slurry pumps to eradicate pump failures. Covanta Energy is one of North America’s largest owners and operators of waste-to-energy plants and other renewable power facilities. Their 60+ facilities produce electricity for about one million homes. The Covanta Dade energy plant in Florida processes 4,200 tons of municipal solid waste and biomass fuel daily. The plant burns that waste to produce electricity, boiling water to turn turbines that generate 77 megawatts of power. During the boiler blowout procedure, 185°F water is pumped from the system to minimize buildup of scale and corrosion. Read about Covanta engineers" pump solution that could stand up to 185°F water, was resistant to corrosion and abrasive sand and grit, and a pump that was available with the high head option needed for the application."

string(143) "https://flowsolutions.com/resources/boiler-blowouts-renewable-energy-plant-installs-hi-temp-slurry-pumps-to-eradicate-pump-failures-case-study/"

For starters, sludge is a unique mixture of fluid, usually water, along with some type of pulverized solid. This material is commonly associated with many industries, including steel processing, mining, power generation, and so on. Because sludge behaves much the same as thick and viscous fluids, a powerful pump is mandatory.

When it comes to sludge, experts divide it into two distinct categories, settling, and non-settling. For settling sludge, coarse particles form, leading to an unstable mixture. Because of the flow and power required with pumping, it is essential to select the appropriate pump. As for non-settling sludge, this consists of fine particles with low-wearing properties. However, it is just as important to choose the right pump for this category as well.

For this type of pump, it is critical that you work with one of the top-rated pump manufacturers in Ontario. In addition to receiving expert assistance as part of the selection process, you will have complete confidence in the pump’s capabilities. When meeting with a manufacturer, a company representative will gather pertinent information and then discuss various factors with you like pump components, including the impeller design and size, construction material, discharge configuration, and more.

The ultimate goal is for you to choose a pump capable of moving a particular type of sludge. Obviously, the heavier the sludge, the more horsepower a pump requires. Of the different types of pumps for this purpose, the best pump manufacturers in Ontario recommend a centrifugal design. Using centrifugal force that a rotating impeller generates to produce kinetic energy offers superior performance and efficiency.

At Premier Fluid Systems (PFS), we can help you identify the right type of sludge pump for your specific needs. We have an incredible engineering design team that comes up with concepts and develops excellent products.

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for medium to high head contractor and bypass applications

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for high head/high flow contractor and bypass applications

Sludge and slurry pumps refer to pumps which have the ability to handle high concentration of solids in relation to the liquid it is suspended in. The viscosity range of sludges varies wildly depending on the type of sludge and its relative dry content as very dry sludges require more specialized machinery to transfer such as by a conveyor. Sometimes sludges can have water added to enable the sludge to be pumped.

After accumulation and development of 10 years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We still adhere technological innovation, top quality, service society, and propose unite, forward-looking, pragmatic, push. Our customers are at home and abroad.