thick mud pump supplier

Distributor of heavy duty submersible mud, sand, sludge & slurry pumps. Specifications of pumps include 5 hp to 30 hp motor, three phase, 208 V to 575 V, 6.8 A to 39 A, 3 in. to 6 in. NPT sizes, 38 ft. to 134 ft. head size & 475 gpm to 1,690 gpm flow rate. Features include impellers, wear plates & agitators made from abrasive resistant 28 percent chrome iron, process hardened ductile iron volutes casted with thick walls, class H motor insulation, double silicon carbide mechanical seals, heavy duty lip seal & stainless steel shaft & shaft sleeve. Sand, sludge & slurry pumps are used in mines, quarries, dredging, coal & ore slurries, sewage treatment plants & steel mills. UL listed. CSA approved. Meets OSHA standards.

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

Our high-head pumps are specially designed for industrial and commercial applications where high heat and high pressure are required. Whether you need to pump water, chemicals, or other liquids over long distances, our high-head pumps are up to the task.

The unique design of our high-head pumps allows them to generate high head and pressure while still maintaining a high flow rate, making them ideal for a wide range of applications including irrigation, water treatment, and industrial processing.

Our high-head pumps are also highly customizable, with a variety of options available to suit your specific needs. Whether you require a high flow rate, a high head, or a combination of both, our team of experts can work with you to create a pump that meets your requirements.

The 4-Inch heavy-duty slurry pump by EDDY Pump. Close coupled or flex coupled version pumps available in extra heavy-duty (HD) class. Depending on your needs, all of our pumps can be setup horizontal or vertical.

Our industrial pumps are non-clog pumps with no critical tolerances designed for high solids pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications.

In harsh conditions with sand, sludge, rocks, slurry, normal dredge pumps clog, wear and fail more often. This leads to downtime for maintenance, hurting your bottom line. This is not the case with EDDY Pump since we have the tolerance to pump objects up to 12 inches!

Whether you’re transferring waste oil mixtures, bio waste, sewage, mud or lime slurries, there’s one thing you can be sure of, and that’s that you need a heavy duty, high pressure sludge pump. Capable of efficiently handling viscous fluids containing solids, Castle Pumps’ range of slurry pumps has been built up over the years to provide you with a non-clogging solution to your waste transfer applications. Not all pump designs can do the job, but that’s where we are there to help you. Our technical sales engineers are on hand to help you to select the right solution for your requirements.

The GATOR Sludge Pump offers many benefits and ensures consistently efficient processes for a variety of applications. Our unique slurry valve uses the pump discharge flow to agitate and slurry the sludge to “thin” the fluid for pumping and handling. After the slurry process is complete, the valve is closed to pump the sludge material to the discharge point.

Sludge pumps are used for many pit dewatering applications in the mining, industrial, agricultural, and construction industries, which often require the regular removal of waste products. Other types of pumps won’t be able to transfer liquids with high solid content, potentially resulting in clogging and backup that leads to system failure and costly downtime.

Low Energy Consumption. Portable sludge pumps feature efficient designs and reduced power consumption compared to other pump systems. As a result, you can save more money on energy costs with a more sustainable solution for waste removal. Low Energy Consumption. Portable sludge pumps feature efficient designs and reduced power consumption compared to other pump systems. As a result, you can save more money on energy costs with a more sustainable solution for waste removal.

High Abrasion Resistance. Sludge pumps are designed to handle abrasive solid materials, unlike other liquid pumping systems, making them more likely to hold up to abrasion. With less vulnerability to abrasion, you can avoid the need for frequent maintenance checks, downtime for repairs and replacements for parts.

High Wear Resistance. Since sludge pumps frequently transfer liquids containing solid content such as sand and gravel, they are constructed from high-quality materials to protect parts from wear. Less wear means further reduced maintenance and replacements, helping you get the most from each system.

Choosing the proper sludge pump largely depends on your application. Factors such as pump design, construction material, pump deployment, power requirements, and amount of solid content in the sludge are all important to consider when selecting a sludge pump for your project.

It is also crucial to work with a reputable sludge pump provider. Doing so grants you access to expert assistance in pump selection so that you can feel confident in your choice. At GATOR Pump, we can work with you to provide a high-quality, efficient, and reliable sludge pump that meets the specifications and requirements of your application.

When searching for the right sludge pumps for any application, GATOR Sludge Pumps can give you the reliability and efficiency you need. Our pump experts can also offer customization assistance; we can accommodate a wide array of unique requests and modifications.

Ideal for moving underwater sludge, abrasive slurries, and rocks, the submersible slurry pumps sit at the bottom of a tank, lagoon, pond, well, or another water-filled environment. Submersible pumps suction out solids and liquids right at the pump itself. The materials are taken in at the intake and pass through a hose connected to its discharge valve. DAE Pumps submersible pumps include a watertight enclosure with the industry’s best o-rings seals for worry-free operations.

With the hose head in the water and the other end connected to the pump, self-priming slurry pumps suction the material to the pump, then out through the discharge valve. Self-priming pumps get prime at the pump by electric or diesel motors drawing water to it. They mount to a portable trailer for easy transportation or on a stationary skid.

The flooded suction slurry pump is located outside of a tank or hopper, typically below or as low as possible. Gravity forces the sludge and liquids to the pump, then passes the materials out through the pipe or hose on the discharge end. The flooded suction pump does not require priming because it uses gravity to prime, and it doesn’t use as much power to operate as the other types of slurry pumps because it does not have to draw the material to it. However, a flooded suction slurry pump can get corrosion and require more repairs because there is always liquid filling the pump.

Gear pumps are one of the most common types of positive displacement pumps. They provide a constant volume of fluid that passes between the teeth of two meshing gears and the casing. Rotating gears and separation of teeth create a suction that pulls fluid in through the inlet. The gears then trap the liquid and move it around the casing to the discharge or outlet. Each revolution creates consistency in the flow of fluid.

Lobe pumps are like gear pumps in that fluid flows around the interior of the casing, but they use lobes instead of the gears with teeth. The lobes do not touch each other, thus reducing wear, and they are driven by external timing gear that allows the lobe pump to operate in either direction.

Vane pumps use blades, know as vanes, that slide in and out of rotor slots to move fluids. This action creates a suction that pumps fluids. The vane pumps use multiple sets of vanes that mount on an off-center rotor that sits close to the cam wall creating a crescent-shaped cavity on the other side. These blades, which are always in contact with the cam wall, turn with the rotor. With the spinning of the rotor, the vanes slide out when they reach the cavity, trapping fluid. As the vanes reach the end of the open space, they slide back in, and the trapped fluid thus moves to the outlet or discharge valve.

Screw pumps and twin-screw pumps use rotating screws to move liquids and solids from one end of the pump to the other. Because of the rotating, turning action, the spinning motion is what pumps the material. The twin-screw pumps are identical to the screw pump, but with a dual screw for more power. Screw pumps are capable of high flow rates with very little to no vibration. They provide excellent usage in irrigation, oil production, fuel injection, and fuel transfer applications.

The piston pump uses a piston or pistons to draw in liquids and solids by creating a vacuum in the chamber to suction in the materials, then pushing them out the other end. Pistons repeatedly move up and down inside the pump chamber to pump the material. DAE Pumps piston pumps use high-quality O-rings to ensure reliable performance. These pumps are used for high-pressure washing, oil production, paint spraying, and other low viscosity liquids.

Diaphragm pumps use a flexible membrane that expands the volume of the pumping chamber bringing in the fluid by opening the inlet valve, then compresses to push out the materials through the outlet valve. The hermetically sealed diaphragm pumps are safe for pumping hazardous and corrosive liquids.

The DAE Pumps Submersible Drainage Pumps support a variety of dewatering applications. Their robust design provides the highest level of performance, reliability, and ease of use. The submersible drainage pumps offer a range of sizes up to 10-inches with over 80 HP and a volume capability of pumping as much as 6100 GPM.

Submersible Sludge Pumps are peak performers in pumping thick mud, clay, and waste. These energy-efficient pumps run at low horsepower, pumping as much as 420 GPM. Available in 3-inch and 4-inch sizes, the heavy-duty DAE Pumps Submersible Sludge Pumps are capable of moving abrasive solids as large as 2-inches. Our Submersible Sludge Pumps provide the support you need for for your toughest jobs.

The DAE Pumps Submersible Slurry Pumps are the toughest and most durable submersible pump. Built for pumping the worst slurry and materials, these pumps have the highest rating in ruggedness. Our Submersible Slurry Pumps are made for dredging the most abrasive media with high solid content in quarries and mining operations. With up to 102 horsepower, these powerful unit are capable of moving 2112 GPM of solids as large as 2.5-inches, and are available in 3-inch, 4-inch, 6-inch, and 8-inch sizes.

The DAE Pumps Payload Electric Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Payload Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

The DAE Pumps Hydraulic Submersible Slurry Pumps are the industry’s best-performing hydraulic submersible pumps. Capable of pumping up to 1325 GPM our hydraulic pumps provide the reliability you need. Because these 3-inch and 4-inch pumps are compact, their lightweight design makes them necessary tools for all site operations. They are non-clogging and are also available in a high head performance of up to 350 feet

The DAE Pumps Hauler Hydraulic Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Hauler Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

DAE Pumps is committed to providing you with the highest quality of pumps at affordable prices. We build our submersible pumps with you in mind. We use the strongest material inside and out to withstand the harshest conditions for getting the job done. Over the years, we built a modular platform of submersible pump that allows us to provide the highest performing pump with the same durability and reliability from one size and power to the next. This means you get the best pump each time.

Our low-cost submersible pump lines are an extension of our commitment to affordably priced pumps. These pumps are built with the same types of metal inside and out as our modular lines, but use a different technology design that brings the performance of these pumps close to those of the other models. We offer these pumps with a lower guarantee so you can get very high-grade pumps at the best prices.

Submersible pumps are the industry’s most durable pumps for underwater operations moving solids and liquids. They can withstanding everyday use of processing water, rocks, sand, mud, sludge, slurry, and other abrasive materials. DAE Pumps provides a variety of submersible pumps for mining, dredging, minerals processing, ash pumping, wastewater, dewatering, and pumping chemicals, oil, sludge, paste, and many other applications. We offer light-duty to heavy-duty submersible drainage pumps, submersible sludge pumps, and submersible slurry pumps.

The submersible drainage pump is built for general dewatering, groundwater, raw water, and construction site use. Construction companies and various municipalities use drainage pumps for removing water from heavily flooded areas and as sump pumps when rainwater or groundwater collects in low-lying and below ground work areas.

DAE Pumps drainage pumps are designed for flexibility and ease of use.  Capable of pumping solids up to .5-inches, the durable design is made to move large amounts of water. DAE Pumps drainage pumps handle clean and dirty water with the best performance and efficiency on the market. Our drainage pumps provide powerful performance with minimal maintenance, and their durable body ensures continued use in harsh environments. We offer a variety of drainage pumps in 3-inch, 4-inch, 6-inch, and 10-inch discharge outlets with a horsepower of over 80 HP, and capable of pumping up to 6100 GPM.

Made to pump thick mud and other similarly viscous mixtures of liquids and solids, submersible sludge pumps are used for moving sludge or light slurry, tank clean-outs, trench and pond cleaning, mining dewatering operations, and various other applications. The sludge pump moves the material that can clog ordinary drainage pumps.

DAE Pumps heavy-duty sludge pumps can move water, but they are made for moving solid material and are built with a high wear resistance inside and out. The high-chrome (55HRC) impellers and base of the pump ensures stability while allowing the passage of large solids. The high-quality components for the mechanical seal guarantees a watertight seal and trouble-free operation. Our submersible sludge pumps move up to 420 GPM and come in multiple sizes and power options. These sturdy sludge pumps provide the reliability you need and the performance you can trust for your dewatering, cleaning, and transferring needs.

The submersible slurry pump is the catch-all of submersibles. Capable of pumping the most abrasive media with high solids content, the slurry pump is the workhorse for quarries and settling pond operations. These ultimate pumps are used for everything from dewatering to dredging.

DAE Pumps non-clogging submersible slurry pumps provide the ultimate in toughness.They have the largest apertures to facilitate the handling of slurry with the most challenging solids and the high-efficiency high chrome agitator can lift settled solids up to 2.5-inches. The robust design uses heavy-duty bearings to withstand shocks and overloads and a double silicon carbide mechanical seal for duty application. Our slurry pumps are available in 3-inch, 4-inch, and 6-inch models, with the ability to move up to 2112 GPM.

Sand is one of the most abrasive materials for any type of pump to manage. The beating of sand on the impeller, volute, and even the hose cause extreme wear and tear on pump components. Thesubmersible sand pump is designed to minimize the effects of blasting sand. However, over a period of extended time, the submersible sand pumps will show signs of wear on these parts from the constant pounding of sand and will require replacement.

Our submersible sand pump wear components are built with a high chromium iron, an extremely strong alloy that is mainly used in mining, milling, earth-handling, and manufacturing industries which require materials with exceptional wear and corrosion resistance. The exceptional wear resistance of high chromium cast iron is due to the high volume fraction of hard chromium carbides. The toughness of the matrix also contributes to the wear resistance and makesit very suitable for pumping sand.

DAE Pumps non-clogging submersible sand pumps provide the ultimate in toughness and sand pumping capabilities. Ourpumps move up to 1664 gallons per minute of material and are available in 3-inch, 4-inch, and 6-inch models.

Sludge pumps and slurry pumps are designed to pump large amounts of water that contains hard and soft solids such as mud, leaves, twigs, sand, and sludge.

Most Sludge pumps and slurry pumps are portable, heavy-duty centrifugal pumps that feature deeper impeller vanes and larger discharge openings than other pumps. Sludge pumps and slurry pumps, which are capable of processing materials with suspended particulates that would clog other centrifugal pumps, can move hundreds or even thousands of gallons per minute.

Submersible sludge pumps are, as the name suggests, designed for pumping liquids with a high sludge content. These are single casing pumps with vortex impellers and specially designed pump housings providing a large free passage through the pump. Submersible sludge pumps offers solid handling capability with free flow vortex hydraulic – a perfect alternative for professional dewatering.

Agitator series submersible pump designed for slurry, mud & sand pumping with hard iron adjustable wear parts & bottom side discharge up to 6-inch size.

Constructed for maximum durability, our dewatering pumps are compact and lightweight, built with the contractor in mind. Trash pump with 2", 3" and 4" designs with Honda GX engine.

Constructed for maximum durability, our dewatering pumps are compact and lightweight, built with the contractor in mind. Centrifugal pump with 1", 2", 3" and 4" designs with Honda engine.

If you need a sludge pump that can handle heavy-duty applications, look no further than our assortment of high-quality Jack Scaffolding pumps. All of our pumps are self-priming, which means that once the pump casing has been initially filled, the pumps will restart themselves automatically. These pumps are simple to set up and require only a little amount of maintenance on a yearly basis.

Judge the market for heavy-duty pumps around the world can be broken down into distinct submarkets based on the sludge pump type, product type, end-user industry, and geographic location. The market can be broken down into the centrifugal pump market and the positive displacement pump market based on the different types of pumps available. During the time period under research, it is anticipated that the segment comprised of centrifugal pumps will hold the largest share of the global market. The market can be broken down into segments such as crude oil, fuel oil, bitumen, and others on the basis of the product type. During the course of the research period, it is anticipated that the crude oil industry would lead the market for heavy-duty pumps worldwide. The oil and gas sector, the power industry, the processing industry, and other end-user industries make up the different segments of the market. The most significant portion of the market is held by the processing industrial sector. A centrifugal type pump and a positive displacement type pump together make up this sort of pump. Because of its extended service life and low maintenance cost, the centrifugal segment is anticipated to develop at a considerable growth rate over the projected period. This growth is predicted to contribute significantly to the overall market size. In addition, population growth, rapid urbanization and industrialization, and increased oil, gas, and electricity production are expected to drive the growth of the service centrifugal pumps market. These factors all drive water and wastewater management, which in turn drives the growth of the market for service centrifugal pumps. hefty. Heavy-duty centrifugal pumps are used in a variety of industries because of their high efficiency, high resistance to wear, and high flow capacity. Some examples of these types of businesses are power generation, the food and beverage industry, and others.

The application known as Quizlet contains a great number of flashcards pertaining to the sludge pump heavy-duty model. Quizlet is a web-based program for learning languages, and its website allows users to manage their accounts and review previously learned vocabulary. A user account can be created in this program by anyone, anywhere in the globe, and flashcards can be created on any subject under the sun. The sludge pump is a type of industrial pump that is typically used in municipal wastewater treatment applications as well as in mining, construction, agriculture, or industrial applications where heavy waste fluids are processed. Other common applications include mining, construction, and industrial applications. To begin, sludge is a distinct mixture that is typically made up of water as the liquid component and a variety of crushed solids as the solid component. This material is frequently used in a wide variety of industries, including the production of steel, mining, and power generation, amongst others. A strong sludge pump is an absolute necessity due to the fact that sludge acts similarly to a thick and viscous fluid. The experts classify sludge into two distinct groups: those that settle and those that do not settle. When the sludge is allowed to settle, coarse particles are produced. This leads to the creation of an unstable mixture, which in turn necessitates the use of a greater amount of pumping power. In the case of sludge that does not settle, the sludge in question is made up of particles that are relatively small and have low abrasion properties. However, selecting the appropriate pump for this category is also of critical significance.

Whether you handle oily mixes, bio waste, sewage, sludge, or lime slurry, one thing is certain: you"ll need a heavy-duty, high-pressure slurry pump. These sludge pumps are designed to provide a clog-free means of transporting sewage and are capable of handling viscous fluids containing solids. These pumps are used for high-pressure suction and contain a separate motor and inter-bearing impellers that allow for high heads to be achieved. Vertical sludge pumps and floating sludge pumps are the two categories of sludge pumps that can be distinguished by their installation orientations, respectively.

The Amazon website features products from a significant number of heavy-duty pump manufacturers from all around the world. Each of these factories is in the business of producing sludge pumps and selling them in significant quantities. Suctioning sludge, industrial effluent, or sewage using a self-priming sludge pump, which is also known as a sewage pump or thickening pump, is a common application for this type of pump. These pumps are classified as centrifugal pumps and are utilized for pumping fluids that contain solid particles. Their category describes their primary purpose. There is a movable diaphragm present in self-priming pumps; this diaphragm is responsible for the release of air, which is why these pumps are referred to as self-priming pumps. The decanter, which performs the same function as a centrifuge tube, is sometimes referred to as a solid screw centrifuge because it features a horizontal screw that revolves at a slow pace in relation to the bowl. Throughout the course of this procedure, solids are continually extracted and disposed of. As a consequence, this leads to great separation performance in a relatively compact space. Sludge decanters from GEA offer a solution that is both energy- and cost-efficient for industrial and hydraulic engineering. Decanters are devices that can be used to clean and treat sludge in addition to wastewater production procedures with costs that are minimized while achieving the highest possible levels of availability, quality, and efficiency. The cantilever in design, horizontal in orientation, and either lined with natural rubber or hard metal, the heavy-duty slurry pumps in the WA series are centrifugal. It is meant to be used in industries such as metallurgy, mining, coal, electricity, construction materials, and others that deal with high-density abrasive mud.

Made of aluminum and cast iron, this lightweight and efficient submersible sludge pump is durable enough for heavy-duty industrial strength and high performance and harbor freight, yet remains extremely portable with its slim design, ideal for a sewage pump that mixes sludge and water with solids and can run in any vertical, horizontal or upside-down position. The robust design provides a robust pump coupling ideal for harsh conditions while protecting the engine and being ready for use when delivered to the field. Whether you work in mining, tunneling, or construction, this pump is your best insurance against water-related breakdowns. From purchase to service, you can turn to DanPumps for dewatering solutions that work in the real world. Mud Pump Features

The frame plates of the WA series pumps have interchangeable solid metal or pressed rubber bushings. Impellers are made of solid metal or pressure-molded rubber bushings

Under harsh conditions such as sand, mud, stone, and mud, ordinary slurry pumps are prone to blockage, corrosion, and frequent failures. But heavy-duty slurry pumps are highly abrasion and corrosion resistant, meaning the pump will last better than pumps from other manufacturers.

Xtreme Pumps supplies a large number of pumps to the mining industry and heavy duties, both domestically and worldwide, which helps to cut down on consumption and maintenance costs. The impeller of the centrifugal sludge pump is one of the essential components of this type of pump. The selection of the mud pump impeller is extremely important to the performance of the mud pump, and this choice is dependent on the application. Due to the abrasive nature of mud pump impellers, mud applications present an extremely difficult set of challenges. It is imperative that the correct impeller be selected for a mud pump in order for the device to function effectively and endure the test of time.

There are three distinct kinds of impellers that can be found in mud pumps: open, closed, and semi-open. The specific use determines both the benefits and the drawbacks associated with each option. Some are more adept at managing solids, while others are more adept at operating at high efficiencies.

To ensure that the impeller of the slurry pump is resistant to wear, its size must be considered. For less abrasive fluids, slurry pump impellers are typically larger than mud pump impellers. The more "meat" in the impeller, the more effectively it can pump abrasive mud mixtures. Consider the impeller of the mud pump to be the offensive line of a football team. Typically, these players are older and slower. They were repeatedly beaten throughout the entire game, but they deserved it. This mode does not require a small player, just as a mud pump does not require a small pusher.

The pump mainly uses direct transmission mode, with high transmission efficiency. According to the needs of users can also use the belt transmission mode;

• Structural design, compared with the ordinary slurry pump, the inlet diameter of the pump is larger, the number of impeller blades is reduced, and the inducer is added to ensure that the pump has excellent cavitation performance and the ability to transport high viscosity and high concentration slurry.

• Structural design, compared with the ordinary slurry pump, the inlet diameter of the pump is larger, the number of impeller blades is reduced, and the inducer is added to ensure that the pump has excellent cavitation performance and the ability to transport high viscosity and high concentration slurry;

AfghanistanAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBonaire, Sint Eustatius and SabaBosnia and HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBrunei DarussalamBulgariaBurkina FasoBurundiCambodiaCameroonCanadaCape VerdeCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos IslandsColombiaComorosCongo, Democratic Republic of theCongo, Republic of theCook IslandsCosta RicaCroatiaCubaCuraçaoCyprusCzech RepublicCôte d"IvoireDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEswatini (Swaziland)EthiopiaFalkland IslandsFaroe IslandsFijiFinlandFranceFrench GuianaFrench PolynesiaFrench Southern TerritoriesGabonGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHeard and McDonald IslandsHoly SeeHondurasHong KongHungaryIcelandIndiaIndonesiaIranIraqIrelandIsle of ManIsraelItalyJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKuwaitKyrgyzstanLao People"s Democratic RepublicLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacauMacedoniaMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorth KoreaNorthern Mariana IslandsNorwayOmanPakistanPalauPalestine, State ofPanamaPapua New GuineaParaguayPeruPhilippinesPitcairnPolandPortugalPuerto RicoQatarRomaniaRussiaRwandaRéunionSaint BarthélemySaint HelenaSaint Kitts and NevisSaint LuciaSaint MartinSaint Pierre and MiquelonSaint Vincent and the GrenadinesSamoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSint MaartenSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSouth GeorgiaSouth KoreaSouth SudanSpainSri LankaSudanSurinameSvalbard and Jan Mayen IslandsSwedenSwitzerlandSyriaTaiwanTajikistanTanzaniaThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkeyTurkmenistanTurks and Caicos IslandsTuvaluUS Minor Outlying IslandsUgandaUkraineUnited Arab EmiratesUnited KingdomUnited StatesUruguayUzbekistanVanuatuVenezuelaVietnamVirgin Islands, BritishVirgin Islands, U.S.Wallis and FutunaWestern SaharaYemenZambiaZimbabweÅland Islands