4 shaft overshot supplier

The term overshot recalls coverlets woven on Early American barn frame looms dating back to the 1700’s. It is believed Europeans brought the weave structure to North America and fortunately weaving materials such as wool and cotton were readily available.

Susan invites you to spend two insightful days exploring one of her favorite weave structures. Her workshop creates multiple overshot samples serving as a ‘snapshot’ of overshot treadling sequences. Her goal is for each participant to enjoy learning the process of weaving “per block order” and understanding the benefits of doing so. This teaching method provides the groundwork for wider (on the loom) weaving projects once concepts are mastered.

Utilizing apre-wound8/2 cotton warp and tabby weft along with Borgs Fårö 6/1 for pattern weft, looms will be dressed prior to the workshop with an 8 1/2″ wide warp. Overshot treadlings such as Star and Rose will be explored in addition to Echo, On-Opposites, Petit Point, Lace Weave, Spetsväv, and Honeycomb.

As a bonus, at the end of the workshop, students will receive a 4-Shaft Overshot Pillows Draft which could include up to ten pillow tops. Sampling first, as we will do in the workshop, will enable you to enjoy your new-found knowledge for such a project.

4-Shaft Floor or table loom with 10-dent Imperial or 45/10 Metric reed; a minimum weaving width of 10”, in good working orderWooden Temple for 8-1/2” weaving width (a binder-clip temple is acceptable but not recommended.)

Participants should bring:Bring a warped shaft loom (sampler is aprox 18” wide), yarns to use for weft – (same as your warp), and normal weaving tools and supplies. Threading information and directions sent upon registration.  Rigid heddle weavers would be able to weave a color gamp in plain weave.Contact barb@weaversloft.com with any questions.

Ask most people what “overshot,” and most weavers think of American colonial weavers and their coverlets. While coverlets are represented here, this collection also includes projects that dazzle with color, drape with luscious softness, and take overshot in new directions. Scarves and shawls, runners (for table and floor), tablecloths and clothing—all appear in this comprehensive collection. Overshot, even in its colonial interpretation, was a miracle weave, allowing unbelievable patterning on only four shafts. Add to pattern the use of color and fine and luxurious yarns, and you’ll start your own love affair with overshot. This is the second eBook on overshot (see also A Baker"s Dozen: Top Projects in Overshot eBook)

Pattern is designed to use our Organic cottolin (Cotolin) to weave 4 placemats- finished size 14"X20", 4 napkins 14"X14" and a runner with a finished size 14"X38". Requires an 8 shaft loom, 24 epi, 15" wide. 1 tube each of our 4 Ruby Anniversary colors Vendor item: HYPattern

Related items:15 3/4" 8 shaft loom, 12 dent reed double sleyed, shuttles, 4 bobbins. Pattern gauge: 12 dpi Yarn weight: Lace Yardage needed:1 tube each of 4 colors. We used 2 reds 5096 & 5116, and 2 purples 8264 & 5153.

This post is the third in a series introducing you to common weaving structures. We’ve already looked at plain weave and twill, and this time we’re going to dive into the magic of overshot weaves—a structure that’s very fun to make and creates exciting graphic patterns.

Overshot is a term commonly used to refer to a twill-based type of weaving structure. Perhaps more correctly termed "floatwork" (more on that later), these textiles have a distinctive construction made up of both a plain weave and pattern layer. Requiring two shuttles and at least four shafts, overshot textiles are built using two passes: one weaves a tabby layer and the other weaves a pattern layer, which overshoots or floats, above.

Readers in the United States and Canada may be familiar with overshot textiles through woven coverlets made by early Scottish and English settlers. Using this relatively simple technique, a local professional weaver with a four-shaft loom could easily make a near-infinite variety of equally beautiful and complex patterns. If you’d like to learn more about overshot coverlets and some of the traditions that settlers brought with them, please see my reading list at the bottom of this article!

As it is twill-based, overshot will be very familiar to 4 shaft weavers. It’s made up of a sequence of 2-thread repeats: 1-2, 2-3, 3-4, and 1-4. These sequences can be repeated any number of times to elongate and create lines, curves, and shapes. These 2-thread repeats are often referred to as blocks or threading repeats, IE: 1-2 = block 1/A, 2-3 = block 2/B.

There are three ways weft appears on the face of an overshot cloth: as a solid, half-tone, or blank. In the draft image I’ve shared here, you can see an example of each—the solid is in circled in blue, the half-tone in red, and the blank yellow. Pressing down the first treadle (shafts 1 and 2), for example, creates solid tones everywhere there are threads on shafts 1 and 2, half-tones where there is a 1 or 2 paired with 3 or 4, and nothing on the opposite block, shafts 3 and 4. Of course, there’s not really nothing—the thread is simply traveling on the back of the cloth, creating a reverse of what’s on the face.

Because overshot sequences are always made up of alternating shafts, plain weave can be woven by tying two treadles to lift or lower shafts 1-3 and 2-4. When I weave two-shuttle weaves like overshot, I generally put my tabby treadles to the right and treadle my pattern picks with my left foot and my tabby with my right. In the draft image I’ve shared above, I’ve omitted the tabby picks to make the overarching pattern clearer and easier to read. Below is a draft image that includes the tabby picks to show the structure of the fabric.

Traditional overshot coverlets used cotton or linen for warp and plain weave wefts, and wool pattern wefts—but there’s no rule saying you have to stick to that! In the two overshot patterns I’ve written for Gist, I used both Mallo and Beam as my pattern wefts.

In the Tidal Towels, a very simple overshot threading creates an undulating wave motif across the project. It’s easy and repetitive to thread, and since the overshot section is relatively short, it’s an easy way to get a feel for the technique.

The Bloom Table Squares are designed to introduce you to a slightly more complex threading—but in a short, easy-to-read motif. When I was a new weaver, one of the most challenging things was reading and keeping track of overshot threading and treadling—but I’ve tried to make it easy to practice through this narrow and quick project.

Overshot works best with a pattern weft that 2-4 times larger than your plain weave ground, but I haven’t always followed that rule, and I encourage you to sample and test your own wefts to see how they look! In the samples I wove for this article, I used 8/2 Un-Mercerized Cotton weaving yarn in Beige for my plain weave, and Duet in Rust, Mallo in Brick, and Beam in Blush for my pattern wefts.

The Bloom Table Squares are an excellent example of what weavers usually mean when they talk about traditional overshot or colonial overshot, but I prefer to use the term "floatwork" when talking about overshot. I learned this from the fantastic weaver and textile historian Deborah Livingston-Lowe of Upper Canada Weaving. Having researched the technique thoroughly for her MA thesis, Deborah found that the term "overshot" originated sometime in the 1930s and that historical records variably called these weaves "single coverlets’ or ‘shotover designs.’ Deborah settled on the term "floatwork" to speak about these textiles since it provides a more accurate description of what’s happening in the cloth, and it’s one that I’ve since adopted.

Our wide range of 4-shaft weaving patterns are perfect for beginner, intermediate and advanced weavers—we have something for everyone. Learn how to create woven kitchen towels, scarves, table runners, cowls, tops, ponchos, cloth, and rugs—all suitable for a table loom or floor loom with four shafts.

Every 4-shaft weaving pattern comes with a weaving draft, which is shown in the PDF pattern, and also delivered as a .wif file for people who use weaving draft software.

This project was really popular when I posted it on Instagram, so I thought I would share it here also. It is a simple overshot pattern - with a twist. Also a great way to show off some special yarn. The yarn I used for my pattern was a skein of hand spun camel/silk blend. I wove the fabric on my Jack loom but you could also use your four or eight shaft loom.

Overshot is a weave structure where the weft threads jump over several warp threads at once, a supplementary weft creating patterns over a plain weave base. Overshot gained popularity in the turn of the 19th century (although its origins are a few hundred years earlier than that!). Coverlets (bed covers) were woven in Overshot with a cotton (or linen) plain weave base and a wool supplementary weft for the pattern. The plain weave base gave structure and durability and the woollen pattern thread gave warmth and colour/design. Designs were basic geometric designs that were handed down in families and as it was woven on a four shaft loom the Overshot patterns were accessible to many. In theory if you removed all the pattern threads form your Overshot you would have a structurally sound piece of plain weave fabric.

I was first drawn to Overshot many years ago when I saw what looked to me like "fragments" of Overshot in Sharon Aldermans "Mastering Weave Structures".

I wanted to use my handspun - but I only had a 100gms skein, I wanted to maximise the amount of fabric I could get using the 100gms. I thought about all the drafts I could use that would show off the weft and settled on overshot because this showcases the pattern yarn very nicely. I decided to weave it “fragmented” so I could make my handspun yarn go further. I chose a honeysuckle draft.

When doing the treadle tie-up I used 3 and 8 for my plain weave and started weaving from the left, treadle 3 - so you always know which treadle you are up to - shuttle on the left - treadle 3, shuttle on the right treadle 8. I then tied up the pattern on treadles 4,5,6 and 7. You can work in that order by repeating the sequence or you can mix it up and go from 4 to 7 and back to 4 again etc. You will easily see what the pattern is doing.

The term overshot brings to mind coverlets woven on Early American barn frame looms dating back to the 1700s. It is believed Europeans brought the weave structure to North America and fortunately weaving materials such as wool and cotton were readily sourced and available.

Susan invites you to spend two insightful days exploring one of her favorite weave structures. Her workshop creates multiple overshot samples serving as a ‘snapshot’ of overshot threading sequences. This approach provides the groundwork for wider weaving projects once concepts are mastered.

Utilizing an 8/2 cotton warp and tabby weft along with Borgs Faro 6/1 for pattern weft. Looms will be dressed prior to the workshop with the 4-shaft 8 1/4″ wide warp.

Our study will delve into understanding block weaves and treadling the overshot weave structure. Overshot treadlings such as Star, Rose, Italian, Flame-Point Fashion will be explored in addition to Echo, On-Opposites, Petit Point, Lace weave, Spetsväv, and Honeycomb to name a few.

Participants will receive a draft for a special project which can be completed after the workshop.  It is a complete Overshot Pillows Draft which is 16” wide on the loom and could include up to ten pillow tops. Sampling first, as we will do in the workshop, will enable you to enjoy your new-found knowledge for such a project.

I never really thought of using different colors for overshot before, but after feeling inspired by a group discussion, I decided to try it! I like it a lot and will probably do it again. The warp is pink, yellow, and blue. The tabby weft is the same rotation of pink, yellow, and blue, while…

One interesting piece of information I learned is that overshot is a fairly modern term. Originally this type of weaving would have been referred to as floats or floatwork. It seems that many people are returning to this original terminology, though the weaving world has thus far shown little interest in making the change back. Personally, I like it. Floatwork sounds a bit less frenetic than overshot – as though I’m peacefully hitting my mark rather than missing it in a wild fashion.

Floatwork, formerly known as overshot which was originally known as floatwork, is a block design traditionally woven on four shafts where a heavier pattern yarn floats above a plain weave ground cloth and creates a raised pattern. Your plain weave background cloth is woven using a finer yarn in your warp and in every other weft pick (these weft picks being the ‘use tabby’ part of your pattern.)

This finer yarn is hidden in places by the thicker yarn floats, blended in places with the thicker yarn (as plain weave) creating areas that are shaded (referred to as halftone), and woven across itself to create delicate areas of plain weave. Most of us think of antique coverlets when we hear ‘overshot.’

Here is the thing about floatwork that really helped it to make sense for me. It is basically a twill weave. As Mary Black puts it, “An examination of an overshot draft shows it to be made up of a repetitive sequence of the 1 and 2, 2 and 3, 3 and 4, and 4 and 1 twill blocks”.

Let’s look at the pattern picks only. When weaving, your pattern blocks should overlap by one thread. This creates a pattern that flows from unit to unit instead of making a sharp step. It also means that the last thread of a given block is the first thread of the next block, and as you are initially threading your loom, your threads will move from odd shaft to even shaft.

Probably the trickier part of treadling is keeping track of where you are in the sequence. Like many traditional floatwork patterns, the pattern I used is meant to be woven tromp as writ or as drawn in. This means that your treadling is the same as your threading. So if your threading is 1-2-1-2-3-2-3-4, then your pattern picks are treadled 1-2-1-2-3-2-3-4. You will be throwing tabby picks after each pattern pick, so your actual treadling looks like (inthis example let’s consider your tabby picks to be ‘a’ and ‘b’) 1-a-2-b-1-a-2-b-3-a-2-b-3-a-4-b. If this looks a bit intimidating, don’t fret. At first it might feel that way, but the pattern really does start to make sense after you get going.

In the case of my draft, the threading sequence is 134 threads long. This is a lot to remember, but I used an index card to write out the sequence. I marked my place by sliding a second card down the pattern as I progressed, keeping it in place with a paperclip.

You can find it listed in the chapter or sub-chapter entitled ‘Notes on the Overshot Drafts.’ As someone who generally cheers on the underdog, I was drawn to this pattern without a name.

Atwater’s patterns are written for a sinking shed loom. For a rising shed loom, like the Baby Wolf I used, simply tie up the shafts left blank in the draft instead of the shafts she tells you to tie up. For all of her traditional floatwork patterns, including the pattern I used, this tie-up would be 3-4, 1-4, 1-2, 2-3. Your tabby tie up should be 1-3 and 2-4.

Here is a list of books and magazines that might be of interest if you’d like to learn more about floatwork/overshot. Many of these references include patterns in addition to thorough instructions.

The purchase of an old fashioned 8-shaft table loom has opened up a whole new world of weaving opportunities for me. I can now discover distorted wefts and warps, double weave, over-shot, shadow weave, blocks and twills..... which were not possible without 4 or more shafts. But all the techniques which I learnt on the rigid heddle loom are applicable on the 8-shaft, but with greater complexity. I will be kept busy for years!