fishing overshot quotation

This drilling tool is an Over shot fishing tool. To construct this part it we manufacture in a similar fashion to the fishing spear. The over shot is precision CNC machined from hardened high alloy steel. And has a sharp internal thread profile. This fishing tool latches to the outside diameter of the broken down hole drilling tool. The hard sharpened threads are designed to latch and thread into the part.

The Mills Machine Overshot is a rugged, external catch, fishing tool that is economical and simple to use. Overshots are manufactured like taper taps except they go over the O.D. of the fish. Like taper taps, overshots are stocked in a variety of sizes and standard connections so we are able to get something to you rapidly. To build an overshot from scratch takes four to six days due to the heat treat process necessary to harden the teeth. It is speedier to build a sub to fit a stocked overshot and match your needs than to build the entire product. We can build the overshot with oversize guides to more easily catch the fish or with a wall hook to snag behind a fish leaning against the drill hole wall. Your Mills sales representative will work with you to get the fastest solution to your problem at the lowest cost. The carbonized threads on overshots are extremely hard and brittle. Be extra careful to avoid impact. In use, slowly lower the tool down the hole until the fish is engaged. Then slowly rotate the tool while applying some down pressure. Mark the drill rod to tell how far into the fish you have penetrated. Overshots can be reworked by annealing, re-threading the overshot and then re-heat treating the re-threaded area. We will quote you pricing as necessary.

You are viewing Bowen or Logan Overshots for sale by Pickett Oilfield, LLC. We have an extensive range of good used or rebuilt Overshots along with the accessories. Call us for your fishing tool needs. For more information contact us by phone at sales@pickettoilfield.com.

PickettOilfield.com offers prospective buyers an extensive selection of quality new, used, and refurbished Oilfield Equipment at competitive prices, including Overshots.

Overshots are a tool used on the downhole process during the fishing operations. It engages the tube or tool on the outside surface. A Grapple or other piece of equipment that is similar attaches onto the overshot and grabs the fish.

The overshot is “planted” onto the fish to provide a new fish neck profile. This is then engaged with a standard releasable pulling tool or a Peak HD FRC pulling tool for heavy jarring applications.

A wide variety of overshot fishing tools options are available to you, such as swivel, fishing plier and spool.You can also choose from ocean boat fishing, lake and river overshot fishing tools,

Renown Rod Overshot Kits are an industry standard and should be kept on every rig.  These are the best available tools for engaging and retrieving common fish items such as sucker rods and couplings.  With simple operating procedures it is one of the industries most popular fishing tools.    Simply land on your fish and rotate to come off.  Engage up to 2 5/16” O.D. inside of 2 7/8” tubing and up to 1 5/8” O.D. inside 2 3/8” tubing.

The Flo-Release Overshot is operated by setting down weight to engage the fish. If the device cannot be recovered the Overshot can be released by setting down weight and increasing the coil flow rate to activate the core piston and allow the Overshot to disengage from the fish. Incrementally sized grapples can be selected to suit the outside diameter of the fish.

The Wireline Releasable Overshot is a slip type overshot used to retrieve a fish lost in the well bore that does not have a conventional fishing neck.

Once latched onto a fish the overshot can be released by jarring downwards provided the overshot has a solid footing upon which the core can be driven against.

The Wireline Releasable Overshot is composed of the top sub, cylinder, nut, main spring, mandrel, auxiliary spring, adapter sleeve, slips etc., simple structure,easy to use.

Series 150 Overshot consists of three outside parts: Top Sub, Bowl, and Standard Guide. The Basic Overshot may be dressed with either of two sets of internal parts, if the fish diameter is near the maximum catch of the Overshot, a Spiral Grapple, Spiral Grapple Control, and Type “A” Packer are used. If the fish diameter is considerably below maximum catch size (1/2” or more) a Basket Grapple and a Mill Control Packer are used.

The Coil Solutions Overshots are used to engage and pull a fish from the well bore. It uses a grapple to bite into the outside of the fish and releases by following through a predetermined rate to disengage the grapple. The tool comes with a range of grapples to accommodate various fish sizes.