overshot card wads brands

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Clear Overshot Disks (either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection: Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

Overshot cards are placed on top of the shot column, just before crimping. Overshot cards aid the load"s combustion process. This produces more consistent pressures and velocities. Also, overshot card wads help the crimp to contain the payload (buffer) and keep contaminants and moisture out.

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Shotshell size selection:Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

NOTE: We can no longer accept Paypal for Ammo or Ammo Components as it is against thier new rules. Apparently, they are trying to make us all safer, however this new rule/political statement does absolutely nothing but divide us. You can still pay by credit card, check, or money order. Sorry about that! Please voice your opinion to Paypal 1-888-221-1161

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Clear Overshot Disks(either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection:Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

Next, the user simply slides the material to be punched into the feed port and begins operating the press as normal.  As filler wads are punched, they will be pushed out the top of the die where they can be collected.  If the operator’s intention is to produce a great many filler wads in one sitting, it is advisable to place a container (a margarine container works well) with a hole cut in the bottom on top of the die, allowing them to stack up inside and avoid making a mess.

Originally designed this unit to punch corrugated cardboard, so that seems like a good place to begin.  The punch works quite well with standard corrugated cardboard boxes I’ve cut into strips.  It’s a fast, simple process that yields nice, concentric disks.  Cardboard works great for buck and birdshot as it’s dense enough to take up slack, but flexible enough to compress during loading.  This is critical to obtaining a professional looking crimp with even the trickiest loads.

Next on the list is my second favorite material, cork.  Once again the press made short work of the 1/4″ thick cork sheet.  The great thing about cork wads is they’re extremely dense and won’t compress, making them ideal for heavy projectiles like slugs, roundballs, or filling large voids in the shot column.

Next up is craft foam.  It’s not really my first choice due to it not being biodegradable, but I know some folks really like it, so I have confirmed the punch will work with it.  As with the cardboard and cork, it punches very easily, although the edges aren’t quite as smooth as the denser materials.

Finally we have plastic blister packaging.  Although not biodegradable, I really like having a transparent option on hand when I need something as an overshot card.  Once again it cuts smoothly, and easily.  The material demonstrated above is  actually plastic from grocery store salad containers if you can believe it, however thicker packaging not only punches well, it crimps even better.

The finished filler wads measure 0.650″, the same internal diameter as a standard 12G shot cup, and an equally excellent size for use as overshot cards.  With a good supply of these on hand, it’s no trouble at all to customize my shot columns by placing them above or below my shot or slugs.  Likewise, if I’ve got a difficult load to crimp like low-volume birdshot or roundball slugs, adding one to the top as an overshot card makes things a snap.

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with Ballistic Products Roll Crimp tools.

If you’ve been reading my articles for any length of time, you probably know I load a lot of shotgun shells using Lyman and other published data. Over the years I’ve also developed a large number of custom loads, many of which require filler wads or overshot cards to get the correct shot column and a good crimp. Although these aren’t the most expensive components on the market, they still add up, particularly if you need several per shell. To make matters worse, they’re often difficult to find, particularly if your local gun store stops stocking the brands you’re accustomed to.

With this in mind I’ve designed and manufactured my own custom punch for producing 12 gauge filler wads and overshot cards. The model shown in the video above represents my prototype, which I’ve been using and testing for quite a while now.

Operation is likewise extremely simple. If you check out the video above, you’ll see there’s a slot cut in the side to allow a multitude of different materials to be fed. So far I’ve used cardboard and vegetable fiber, in the future I’ll likely try cork as well.

With the material in place it’s a simple matter of operating the press handle, and punching filler wads. Each one comes out the exact internal diameter of a standard 12 gauge shotshell wad. If I need to produce a lot and don’t want to make a mess, I just place a margarine container with a hole in the bottom onto the nozzle at the top of the die, and punch as many as I need.

With a good supply of these on hand, it’s no trouble at all to customize my shot columns by placing them above or below my shot or slugs. Likewise, if I’ve got a difficult load to crimp well, like low-volume birdshot or roundball slugs, adding one to the top as an overshot card makes things a snap.