overshot card wads for sale

Overshot cards are placed on top of the shot column, just before crimping. Overshot cards aid the load"s combustion process. This produces more consistent pressures and velocities. Also, overshot card wads help the crimp to contain the payload (buffer) and keep contaminants and moisture out.

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Clear Overshot Disks(either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection: Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Shotshell size selection:Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

NOTE: We can no longer accept Paypal for Ammo or Ammo Components as it is against thier new rules. Apparently, they are trying to make us all safer, however this new rule/political statement does absolutely nothing but divide us. You can still pay by credit card, check, or money order. Sorry about that! Please voice your opinion to Paypal 1-888-221-1161

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Clear Overshot Disks (either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection: Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

This card can be used as an overshot card to hold the shot charge in place in muzzle loaders, brass shells, and roll crimped shotshells. Works equally well as a nitro card in applications where a thinner card is needed.

Circle Fly wads have recently been improved. The 1/8” nitro card wad is now 100% waterproof, so it may be loaded in black powder shot shells using lubed cushion wads and the moisture will not soak through the nitro card and foul out the powder charge. The overshot card is now thinner and lighter, but stiffer; it is .025” thick instead of .030”, but is not made from a laminated stock like the old one was, so it is actually stiffer. Wad size .740.

The price to quantity is second to none! I have completely switched from BPI overshot cards to Dixie Gun Works! plus they are a true .025" thick card were BPI"s cards mic at .040" which makes a world of difference on some of my more particular buckshot loads crimps! Thanks to the team at Dixie Gun Works!

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Clear Overshot Disks(either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection:Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

These take the place of the over powder card and cushion wad combination. In independent testing Felt Wads have drastically improved pattern density over conventional wads by as much as 100%. Two Felt Wads over the powder and one overshot have produced excellent results in most guns.

No need for wet wad loading. By design, we have solved the problem of loading through a full choked barrel. Felt Wads have a memory and will return to their original size and shape after passing through the choke. A proper gas seal is maintained and will allow you the full benefits of your load. The Standard Wool Wads are made from 100% vergin wool.

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with Ballistic Products Roll Crimp tools.

I thought this could be a good thread to list the other parts/tools for making homemade fillers like OS cards, wad inserts of felt and thick cardboard. Here’s the ideas I’ve read or come up with:

Here’s a link to larger hollow punch, it has 9/16 (.56″) and 5/8 (.625). The 9/16 should work for 20ga OS while the 5/8 for 20ga nitrocards (used for 12ga load spacers).

A great guy who goes by the moniker “lostknife4” produces some beautiful looking roll-crimped shells, and puts a nice round label over the OS card.  A lot of folks liked it, and here’s what Lost said about how he made the labels:

Another useful cut-out I have recently used is from the thin stiff plastic sheets that bacon is packed on.  I got this idea from my buddy azdukhuntr.  The PT2092 wad has a thin web between the powder and shot, and several folks have gotten wad burn through when using the max load published for that wad by BPI, 38gr Lilgun.  Until last month when BPI started importing a new wad by B&P intended for 3″ 20ga hull, which they call a CSD203, this Pt2092 had the largest published 20ga steel shot payload at 420gr.  So folks want to use it, and it’s half the price of SAM1 wads.  In order to strengthen up the wad so it doesn’t burn through and ruin patterns, you can glue a thin plastic disc up inside the powder cup.  These bacon sheet cutouts work perfectly.  I used a dab of woodglue, azdukhuntr uses contact cement I think.  It’s a bit of work, but you don’t make too many of them for hunting rounds.

While reloading shot shells and using roll crimps, overshot cards are placed on top of the shot/buffer media to keep everything in the shell. ...Why buy them when you can print them for about 2 cents each?

This is an overshot/wad card cutting die. Insert this die upside down inside your press using a L-N-L bushing adapter. I"ve made provisions for adding a metal washer or other insert to beef up the cutting area. Reem the metal insert to 18.67mm.

This one is an overshot waterwheel, printed as a flat pack then glued together. ...I have included 2 versions of the paddles a single piece on and a 3 piece on that can be printed flat

This one is an overshot waterwheel, printed as a flat pack then glued together. ...I have included 2 versions of the paddles a single piece on and a 3 piece on that can be printed flat

Overshot water wheels In an overshot water wheel the mill race brings the water to the top of the wheel, where it strikes the paddles or buckets and turns the wheel. This is more efficient because as well as the force of the flowing water, the...

12g (12 gauge) Template for cutting out Overshot Cards for Shotgun Rollcrimp Shot Shells If you like my models please consider supporting me on Patreon : https://www.patreon.com/bigmrtong

Friend wanted to know if I could make business cards for him. After some trial and error this what he got. ...Of corse scaled down to .3 so it will be about the size of your palm.

http://www.thingiverse.com/apps/customizer/run?thing_id=66327 Instructions Using the following options: bottom_text_rotation = 0 Move_Image_Left_Right = 30 card_type = 56 top_text_rotation = 0 build_plate_selector = 3 bottom_text_label =...

Sometimes what you do can"t be put on a business card. Maybe you design custom Oilfield Software for fluid management. Maybe you are a photographer or graphic design artist. Perhaps you write code or film porn. Any way it goes a few samples of your...

Wanted a case for business cards. ...Prints quickly on mk MK2s. Fusion 360. I suggest you slightly size the top up a hair so its a snugger fit. 85mmx55mm business card.

http://www.thingiverse.com/apps/customizer/run?thing_id=66327 Instructions Using the following options: Move_Bottom_Text_Up_Down = 43 build_plate_manual_y = 100 build_plate_manual_x = 100 card_type = 71.1 Move_Image_Up_Down = 40 card_count = 40...

Summary Sometimes what you do can"t be put on a business card. Maybe you design custom Oilfield Software for fluid management. Maybe you are a photographer or graphic design artist. Perhaps you write code or film porn. Any way it goes a few samples...

Sometimes what you do can"t be put on a business card. Maybe you design custom Oilfield Software for fluid management. Maybe you are a photographer or graphic design artist. Perhaps you write code or film porn. Any way it goes a few samples of your...