overshot gate brands

Mueller refers to one or more of Mueller Water Products, Inc., a Delaware corporation ("MWP"), and its subsidiaries. MWP and each of subsidiaries are legally separate and independent entities when providing products and services. MWP does not provide products or services to third parties. MWP and each of its subsidiaries are liable only for their own acts and omissions and not those of each other. Mueller brands include Mueller®, Echologics®, Hydro Gate®, Hydro-Guard®, HYMAX®, i2O®, Jones®, Krausz®, Mi.Net®, Milliken®, Pratt®, Pratt Industrial®, Sentryx™, Singer®, and U.S. Pipe Valve & Hydrant. Please see muellerwp.com/brands to learn more.

Mueller refers to one or more of Mueller Water Products, Inc., a Delaware corporation ("MWP"), and its subsidiaries. MWP and each of subsidiaries are legally separate and independent entities when providing products and services. MWP does not provide products or services to third parties. MWP and each of its subsidiaries are liable only for their own acts and omissions and not those of each other. Mueller brands include Mueller®, Echologics®, Hydro Gate®, Hydro-Guard®, HYMAX®, i2O®, Jones®, Krausz®, Mi.Net®, Milliken®, Pratt®, Pratt Industrial®, Sentryx™, Singer®, and U.S. Pipe Valve & Hydrant. Please see muellerwp.com/brands to learn more.

Overshot gates (also known as pivoting weir gates) are used to control upstream water levels. Versatility, efficiency, and safety are the primary reasons the Fresno Overshot Gate is the method of choice for municipal, agricultural, and industrial canal water control.

Waterman Tilting Weir (Overshot) Gates are an overflow-type gate used to control levels in canals, basins and other agricultural, municipal and industrial applications.

The basic gate design uses a rectangular panel mild steel panel that is mounted to a piano hinge at the forward bottom edge of the gate leaf.    This leaf is raised and lowered using a cable drum hoist to control the upstream water level.

Waterman Canal Gates offer reliable water control on canal and pipeline systems and are built-to-last and designed for years of reliable service, offering a typical field life exceeding 40 years.Learn More

Waterman Roller Gates are designed to control flow and reduce operating loads for high head applications, large loads, or where frequent operation is required. Stainless steel, permanently-lubricated wheels are mounted on each side of the gate. The wheels operate on rails mounted to each side of the opening.Learn More

Waterman Tilting Weir (Overshot) Gates are an overflow-type gate used to control levels in canals, basins and other agricultural, municipal and industrial applications.Learn More

Waterman Self Regulating Tide Control Gates are ideal for tidal wetlands preservation and restoration. The gates restore tidal flushing of marshes without flooding of upland property behind dikes and levees.Learn More

Waterman C-8 Slide Ditch Gates are the most advanced, easiest operating, tightest sealing gate of its type and price in the field of water control. Most commonly used on ditch turnouts and similar low head operations, this ruggedly designed, press-formed, all steel gate holds in any position for easy flow regulation, seals positively, slides easily, and does not load with sand or silt.Learn More

Waterman offers best-in-class water control slide (sluice) gates for water treatment, wastewater, and hydropower applications. They’re noted for their excellent sealing and leak resistance, and for their long service life. Each gate is custom-designed to your project requirements.

Waterman cast-iron gates lead the industry in design and performance.  Waterman’s decades of experience in cast iron technology and in-house (U.S.-based) machining and testing positions the company as a preferred supplier.

Waterman stainless-steel and aluminum fabricated gates offer a continually-self-adjusting seal system that performs better than required by the AWWA C561/C562 spec.

We offer many resources for gate design and selection on-line.   For additional help in specifying a gate for your project, we welcome your call to our Design and Specification Support Line  (800) 445-8457.

WATERMAN TILTING WEIR (OVERSHOT) GATESare an overflow-type gate used to control levels in canals, basins and other agricultural, municipal and industrial applications.

The basic gate design uses a rectangular panel mild steel panel that is mounted to a piano hinge at the forward bottom edge of the gate leaf.    This leaf is raised and lowered using a cable drum hoist to control the upstream water level.

Split Gate – a WT innovation producing the best Check Structure options available– two blades in one frame (bottom up and top down). Standardsingle or double stem for debris/silt removal and emergency large flow dumps and Independent Blade where both blades operate independently for double blade automation.

“Smart” Sluice Gates – another WT innovation –  WT gates with integrated Controller (PLC), add telemetry for integrated Actuator and RTU in one enclosure.

... TILTING WEIR GATES allow for precise upstream water control to tight tolerances. An inherently safe option, the gate allows for surge flows and debris to pass over.

Custom manufacturer of corrosion resistant sluice gates. Sluice gates are available in sizes ranging from 12 in. X 12 in. to 120 in. X 120 in., is available as down operating weir gate, with gate materials of FRP & guide frame materials including FRP or aluminum. FRP sluice gates are corrosion resistant, have a low coefficient of friction for no galling or getting rough due to friction or chemical attack. Gates are molded to exact size requirements with no exposed fibers or cut edges with rigid high density polyisocyanurate foam molded into gate for total encapsulation. Gates are factory assembled & shipped ready to install.

Armtec is an industry leader in water control gates for wastewater treatment plants, water treatment plants, and irrigation and flood control projects. Thousands of customers globally can attest to the high quality of Armtec’s gate ...

Obermeyer drive-over water control gates provide protection against flood damage from water entering through vehicle garage entrances. Obermeyer drive-over water control gates are available with a flush which is sufficiently robust to support highway traffic and is also suitable ...

The single leaf overshot gate is an overshot style gate that has been used in the water industry for close to 40 years. The simplicity of the design allows it to be cost effective and the overshot design allows for excellent open channel control. The cable drive uses stainless steel wire ropes for ...

Design: 4-sides tight, Steel fabricated construction with fully guided gate. Width: 150, 200, 250, 300, 350, 400, 500 mm. Material: 1.4404 (316L)/ PE-UHMW. Actuation Socket (4). Main applications: Water & Waste Water ...

Design: 3- or 4-sides tight, Drain seal, Steel fabricated construction with fully guided gate. Width: 700 - 4000 mm. Material: 1.4404 (316L)/ PE-UHMW. Actuation all type.Main applications:Water & Waste Water ...

The fabricated side gate can be provided in an overshot or undershot style configuration and supplied with single stem or dual stem operators. The slide gates are made from stainless steel with UHMW slides, bevel gearboxes, and ACME threaded stems. The gates can be customized to fit existing structures or custom ...

Invented by Peter Langemann, the Langemann Gate was developed through a cooperative effort between St. Mary River Irrigation District, Peter Langemann and Aqua Systems 2000 Inc. (AS2I). The Langemann gate, used in conjunction with one of AS2I’s controllers, provides solutions to a host water of control ...

The LOPAC gate was developed by Peter Langemann in the 1980s to assist tail end irrigators in managing widely fluctuating water supplies. A number of installations have operated successfully for the past couple of decades. Aqua Systems 2000 Inc. (AS2I) has combined the simplicity of the LOPAC with a hydraulic ...

Design: 3- or 4-sides tight, Drain seal, Steel fabricated construction with fully guided gate. Width: 200 - 1500mm. Material: 1.4404 (316L)/ PE-UHMW. Actuation all type. Main applications: Water & Waste Water ...

These slide gates are directly mounted on the face of the wall and are used to isolate flow in and out of a conduit. They are suitable for 6 m seating and unseating head up to 600 x 600 mm size and 6 m seating and 3 m unseating head for higher sizes up to 1200x1200 ...

These open channel slide gates are used to isolate flowwithin as well as in and out of an open channel. These are suitable for seating water head and are provided with sealing arrangement on 3 sides only and not on top side and so the height of water should always be less than the height of ...

Short length / open top frame provided with short Length extension guides sufficient to engage at least half the overall vertical height of slide / door when the gate is full open. Slide sufficiently ribbed to suit the applicable water head and designed to suit rising stem requirement. Slide provided with ...

Water control gates are used to control the mass flow of water or wastewater in various environments and process applications. They are designed in a square, Circular or rectangular shape. The device can be actuated with manual, electric, pneumatic, or hydraulic operating systems. We manufacture durable and ...

The Fontaine-Aquanox SERIES 92 gate is designed to control and/or isolate water flows in channels. Its unique sealing system enables the gate to seal in both directions. The maximum allowable leakage rate is 0.1 U.S. gpm per foot of perimeter (1.25 l/min per meter) in seating and unseating head conditions ...

The Fontaine-Aquanox SERIES 25 gate is designed to control water flows in channels. It is the same construction as the Series 20 with the exception that it is not equipped with a top seal. The maximum allowable leakage is 0.04 US GPM per foot (0.5 l/min per meter) of the perimeter in seating and unseating ...

Self-Contained Frame Gate with a non-rising stem design and pedestal mounted actuator. This configuration is useful in situations where a pedestal mounted actuator is desired, but the ceiling clearance is limited and does not provide space for rising stem, or when transmitting the operating forces to the ...

Bulkhead Gates SERIES 23 is used to shut off water flow in structures to enable maintenance or repairs on other equipment or for emergency purposes (Figure 23-01). They are also used to divert a flow of water in different areas of a plant. Bulkheads are also referred to as Stop Shutters or Intake Gates and ...

The Fontaine-Aquanox SERIES 40 weir gate is used to control flows and level in different applications by opening downwards and allowing water flow over the stainless steel plate. The SERIES 40 sealing system design is similar to that of the SERIES ...

Open Frame Gate with a rising stem design and pedestal mounted actuator. The most common configuration encountered when above ground (or floor) installation of the operating mechanism is practicable. Operating forces of the gate are transmitted to the structure (floor). Pedestal mounting brackets are ...

The world will not be able to avoid overshooting the goal established in the 2015 Paris Climate Accord to limit global warming to, ideally, 1.5 degrees Celsius compared to pre-Industrial levels, Bill Gates told Reddit users on Wednesday.

While it"s "great" if people want to be vegan, Gates doesn"t think most people will do that and thinks that alternative meat products will "eventually" be "very good."

The world will not be able to avoid overshooting the goal established in the 2015 Paris Climate Accord to limit global warming to 1.5 degrees Celsius compared to pre-Industrial levels, according to Bill Gates.

The billionaire philanthropist and Microsoft co-founder answered questions from Reddit users on Wednesday and a handful of the questions revolved around climate change. Gates made his fortune launching the software company Microsoft, but he has since launched the nuclear innovation company TerraPower and an investment firm, Breakthrough Energy, to back various climate change innovations, and has written a book about climate change, How to Avoid a Climate Disaster.

"The pace of innovation is really picking up even though we won"t make the current timelines or avoid going over 1.5," Gates wrote in response to a question about how well the world is responding to climate change.

Gates is hardly alone in his view. A report out at the end of October from the United Nations Environment Program found "no credible pathway to 1.5° Celsius in place."

Gates also said bedraggled climate mitigation efforts will "slow down the progress we make on improving the human condition." He pointed out that in some parts of the world more than 10% of kids die before the age of five and more than 30% don"t have enough to eat.

"We are making excellent progress," Gates said, while also acknowledging that the Ukraine war has thrown a wrench in TerraPower"s plans because the reactors planned to operate with fuel coming from Russia and that relationship is no longer viable.

TerraPower"s first plant is slated for Wyoming and due to be online by 2030, Gates said. "This can make a huge contribution to climate challenges since it will be low cost and super safe," Gates wrote.

Where making electricity is responsible for 27% of emissions, growing things like plants and animals is responsible for 19% of emissions, according to a breakdown Gates provided in his own climate book.

Gates has backed several companies working to make meatless meat products, including Beyond Meat and Impossible Foods, he told Reddit users. And he"s also backed Memphis Meats (which has since rebranded under the name Upside Foods), Gates said, and which takes cells from an actual animals and grows the products in laboratory environments.

"I think eventually these products will be very good even though their share is small today," Gates told Reddit. It"s important to innovate alternative ways to produce meat alternatives and climate conscious ways because, "for people who want to go Vegan that is great but I don"t think most people will do that," Gates said.

Beyond diet, Gates generally supports the thesis that creating cost-effective clean-energy alternatives is the best way to fight climate change. "The key on climate is making the clean products as cheap as the dirty products in every area of emission — planes, concrete, meat etc," Gates said on Reddit. "This is the only way we can ask all the countries in the world to change. If it costs a lot extra we won"t succeed."

While innovation is the primary tool humans have to address climate change, according to Gates, everyone can contribute to mitigating the effects of climate change, he said.

Buying an electric car is something individuals can do, as are options to pay "a bit extra" to offset emissions generated when you travel, which Gates does for all of his emissions for himself and his family.

According to Bill Gates, the world will be unable to avoid exceeding the goal set in the 2015 Paris Climate Accord to limit global warming to 1.5 degrees Celsius above pre-industrial levels. On Wednesday, Bill Gates addressed questions from Reddit users, and a few of them were about climate change. Other than owning G. Microsoft, Gates has since founded the nuclear innovation company TerraPower and an investment firm, Breakthrough Energy, to support various climate change ideas, as well as published a book about climate change, How to Avoid a Climate Disaster.

“The pace of innovation is picking up, even though we won’t make the current timelines or avoid going over 1.5,” Gates responded in answer to a query about how the globe is responding to climate change.

Climate mitigation efforts, according to Gates, will “slow down the progress we make on enhancing the human condition.” He stated that in some regions of the world, more than 10% of children die before the age of five, and more than 30% go hungry.

TerraPower’s revolutionary nuclear reactors employ liquid sodium as a coolant and uranium as a fuel supply.”We are making excellent progress,” Gates added while admitting that the Ukraine crisis has thrown a wrench in TerraPower’s plans because the reactors meant to run on Russian fuel are no longer practical.

Other than providing clean energy, Gates has supported multiple startups aiming to create meatless meat products, including Beyond Meat and Impossible Foods. He’s also supported Memphis Meats (which has subsequently rebranded as Upside Foods), which uses cells from genuine animals and develops the products in laboratory surroundings, according to Gates.

“I think these goods will be really good ultimately, even though their share is minimal now,” Gates said on Reddit. It’s critical to develop alternate methods of producing meat alternatives that are also environmentally friendly, since “for those who want to go vegan, that’s fine, but I don’t think most people would,” Gates added.

Aside from diet, Gates believes that developing cost-effective clean-energy alternatives is the best approach to combating climate change. “The solution to climate change is to make clean things as cheap as dirty things in every area of emission — planes, concrete, beef, and so on,” Gates wrote on Reddit.”This is the only way we can ask all countries to change.” “We will not succeed if it is prohibitively expensive.”