foster power tong 58-93r free sample

Oil Level Lube FittingsOPERATIONAL MAINTENANCENote 1. Note 2. Note 3. Note 4. Lube fittings should be greased weekly. Transmission should be checked after every trip, and if water or dirt is found in transmission, change oil. Under normal conditions oil should be changed every 100 work hours. Clean and grease Tong Head and Backup Tool after every trip, use kerosene or solvent and a wire brush for cleaning. After cleaning, apply cup grease to jaws, pins, ring gear and top seal. Hazards of steam cleaning Tong Head are: Water will be forced by top seal into transmission. also removing all lubricants from top seal and causing it to harden. If steam cleaning is used, Guide Bell should be bolted on place and after cleaning, the transmission should be checked for the presence of water.

SAFETY POINTS AND WARNINGSNote 5. Note 6. Note 7. Note 8. CAUTION, keep hands clear of Tong Head while Tongs are in operation. Caution should be taken while operating this equipment, as parts inside the Tong Head rotate. Do not crawl or stand under Tongs as hydraulic line could be cut or broken and Tongs will fall. Do not operate Power Tongs until the Anchor Arm is attached to the Tong and Anchor Post. Power should be off before any size equipment change, maintenance, or any other work is done to this equipment.DATESubsidiary of Galveston-Houston Company

Westco Closed Head Tong has been proven to be an excellent tool for the fast, safe, and trouble-free making up and breaking out of 1.313” to 6.063” O.D. tube.

Model58-93RHydraulic Power Tong are closed-head with variable torque, hydraulic lift, pressure oil bath lubrication, gear train, roller chain final drive and two-speed operation, using advance technology from foreign country. It adopts special five-jaw tubing clamping technology and drive system, so it can perform safe, convenient and effective clamping, making-up and breaking-out of tubing, small casing and small drill rod of different specifications.It is an ideal tool for repairing well in the field. Adopting circular friction clutch device, when the power tong work normally, you can shift the high gear or low gear.The 58-93R hydraulic power tong , closed-Head Tubing Tongsd design increase the service life, which make the operation of power tong more reliable;With the independent lubrication system, the pressure oil lubricate every parts;With five-jaw clamping technology, it can clamp the tubing effectively;It can equip with the hydraulic lift cylinder and torque arm(stiff arm) for power tong.

1 Slip Inserts, Tong Dies, and Jaws Index Page Slip & Bowl Inserts Page 3-1/2" TS 100 Slip /2" Ortco Slip /2" Ortco Slip Rotary Slip Inserts Baash Ross DU Varco SDS, SDML, SDXL Woolley type B: 4-1/2" & 5-1/2" Woolley type XL: 4-1/2 & Slip Type Elevator Inserts BJ LYT Slip Elevator BJ MYT Slip Elevator BJ YT Slip Elevator BJ HYT Slip Elevator BJ YC Slip Elevator Elevator/Spider Inserts BJ Elevator/Spiders Varco, Blohm + Voss Elevator/Spider Drill Collar Slip Inserts Baash Ross C & C Varco DCS-S, DCS-R, DCS-L Woolley Type A Casing Slip Inserts Baash Ross UC-3 & UC Varco CMS-XL Woolley Type C Tubing Spider Inserts BJ 50 & 100 Ton Cavins Model B Cavins Model C & Top Load Tubing Spider Inserts (Cont.) Page Cavins Model F Hydra Rig Model 150 & Guiberson T-40 & T Oil Country Type G Mission Shallow Well Slips Mission Deep Well Slips Manual Tong Dies Reducing Tong Dies Tong Die Drivers BJ Type Tong Dies Blohm + Voss Tong Dies BVM Tong Dies Web Wilson Tong Dies Woolley Manual Tong Dies Power Tongs - Jaws & Inserts BJ Jaws, Bushings & Inserts Foster & 58-93R Drag Ring Ass"y Foster & 58-93R Jaws & Inserts Cesco/Gill Tong Jaws & Inserts & Drag Ring Ass"y & Jaws & Inserts Back-up Tool Jaws & Inserts Back-up Tool Jaws & Inserts Misc. Inserts & Tong Dies Kelco K-20, K-25, K Hillman Kelley 500-C Jaw/Die Combination.. 24 Hillman Kelley Wrap Around Tongs Eckel Power Tong Dies Sucker Rod Elevator Plates Kelly Spinner Model 77 Jaws sales@rigtool.com (877) fax (817)

17 Reducing Tong Die - Reference Chart* 1-1/4" Die Slot Cat. # Ref. # Size Description Wt N/A 9/16" x 1-1/4" x 3-7/8" 1/8 Reduction Tong Die N/A 9/16" x 1-1/4" x 5" 1/8 Reduction Tong Die N/A 9/16" x 1-1/4" x 5-7/8" 1/8 Reduction Tong Die N/A 5/8" x 1-1/4" x 3-7/8" 1/4 Reduction Tong Die N/A 5/8" x 1-1/4" x 5" 1/4 Reduction Tong Die N/A 5/8" x 1-1/4" x 5-7/8" 1/4 Reduction Tong Die N/A 11/16 x 1-1/4 x 3-7/8 3/8 Reduction Tong Die N/A 11/16 x 1-1/4 x 5 3/8 Reduction Tong Die N/A 11/16 x 1-1/4 x 5-7/8 3/8 Reduction Tong Die N/A 3/4" x 1-1/4" x 3-7/8" 1/2 Reduction Tong Die N/A 3/4" x 1-1/4" x 5" 1/2 Reduction Tong Die N/A 3/4" x 1-1/4" x 5-7/8" 1/2 Reduction Tong Die N/A 13/16 x 1-1/4 x 3-7/8 5/8 Reduction Tong Die N/A 13/16 x 1-1/4 5 5/8 Reduction Tong Die N/A 13/16 x 1-1/4 x 5-7/8 5/8 Reduction Tong Die N/A 7/8 x 1-1/4 x 3-7/8 3/4 Reduction Tong Die N/A 7/8 x 1-1/4 x 5 3/4 Reduction Tong Die N/A 7/8 1-1/4 x 5-7/8 3/4 Reduction Tong Die N/A 15/16 x 1-1/4 x 3-7/8 7/8 Reduction Tong Die N/A 15/16 x 1-1/4 5 7/8 Reduction Tong Die N/A 15/16 x 1-1/4 5-7/8 7/8 Reduction Tong Die N/A 1" x 1-1/4" x 3-7/8" 1 Reduction Tong Die N/A 1" x 1-1/4" x 5" 1 Reduction Tong Die N/A 1" x 1-1/4" x 5-7/8" 1 Reduction Tong Die 1.15 * Interchangeable with: Custom Die(CDI), National Oilwell Varco (NOV), Ortco Inc. Tong Die Drivers Cat. # Ref. # Description Wt. Ea. Qty. Req. Box Tong Die Drivers N/A Tong Die Driver, A/R N/A Tong Die Driver, 1-1/ A/R Cat sales@rigtool.com (877) fax (817) Page 15

18 Tong Die Cross - Reference Chart* 5/8" Die Slot Cat. # Ref. # Size Application Wt /8" x 5/8" x 1-15/16" BJ Type S & WS Tongs Eckel 4-1/2" Tong 2-1/16" Jaw /8" x 5/8" x 4-1/2" Hillman Kelley Standard: All Sizes Drill Pipe & Casing Power Tongs S /8" x 1" x 1-7/16" (w/slot) BJ Powermatic & Hydratorc Tong w/ 1" Die Slots (4-1/8" x 4-1/2") S 6209S 3/8" x 1" x 1-15/16" (w/slot) BJ Type MS & MS Backup /8" x 1" x 2-1/2" Eckel 4-1/2" Tong, 4" & 4-1/2" Jaw.25 1" Die Slot 3/8" x 1" x 2-5/8" S BJ CTS 4-1/2", 5" & 5-1/2" Tongs.15 (w/slot) /8" x 1" x 3-7/8" BJ Powermatic Tong, Farr Power Tong, Weatherford 5-1/2" & 7-5/8" Tong /8" x 1" x 4-1/4" Web Wilson Type C, D, /8" x 1" x 4-1/2" Hillman Kelley Backup Die /8" x 1" x 5-3/4" Web Wilson Type B & Old Style AAX BJ B+V BV BD* /2" x 1-1/4" x 3-7/8" BJ Drill Pipe Power Tongs Eckel 5-1/2" to 30" Power Tongs Farr Power Tongs /4" Die Slot BD* /2" x 1-1/4" x 5" BJ Type SDD, C, F, & LF Tong BJ Power Casing Tongs (4-1/2" to 13-3/8") Woolley Type Super C, SLF & SDD Tong Eckel Model 850 Web Wilson B+V BV-25, BV-35, BV BD* /2" x 1-1/4" x 5-7/8" BJ Type B & DB Tongs Web Wilson AAX, H & AAX-ST-160 Woolley Types Super A Super B Rotary & Super B Casing Tongs B+V, BV-55, BV-57, BV-65, BV * Interchangeable with: Custom Die(CDI), National Oilwell Varco (NOV), Ortco Inc. *Blue Diamond Tong Dies Available for 1-1/4 Die Slots Page 16 sales@rigtool.com (877) fax (817) Cat. 2012

19 BJ 4-1/2 R, RS, Tubing Tongs Replacement - Jaws, Bushings, and Tong Dies* Cat.# Ref. # Description Wt. Ea. Qty. Req. Box Replacement Jaws Jaw Assembly, 2-3/8" A/R Jaw Assembly, 2-7/8" A/R Jaw Assembly, 3-1/2" A/R Jaw Assembly, 4-1/2" A/R Replacement Bushings Bushing Assembly, 2-3/8" A/R Bushing Assembly, 2-7/8" A/R Bushing Assembly, 3-1/2" A/R Bushing Assembly, 4-1/2" A/R Replacement Tong Dies N/A Power Tong Die, 2-3/8" x 1" (1.315 ) N/A Power Tong Die, 2-3/8" x 1-1/4" (1.660 ) N/A Power Tong Die, 2-3/8" x 1-1/2" (1.900 ) N/A Power Tong Die, 2-3/8" x 2-1/16" Power Tong Die, 2-3/8" x 2-3/8" N/A Power Tong Die, 2-7/8" x 1 (1.315 ) N/A Power Tong Die, 2-7/8" x 1-1/4" (1.660 ) N/A Power Tong Die, 2-7/8" x 1-1/2" (1.900 ) N/A Power Tong Die, 2-7/8" x 2-1/16" N/A Power Tong Die, 2-7/8" x 2-3/8" Power Tong Die, 2-7/8" x 2-7/8" Tong Die, 3/8" x 1" x 3-7/8" (3-1/2" Jaw & Bushing) S Tong Die, 3/8" x 1" x 1-7/16" w/slot (4-1/2" Jaw & Bushing) * Interchangeable with: BJ, Carter Tool, Oil Country, 4-1/2 Open Face Tubing Tongs Cat sales@rigtool.com (877) fax (817) Page 17

20 BJ - 5-1/2 CTS Tubing Tongs Replacement - Jaws, Bushings, and Tong Dies* Cat.# Ref. # Description Wt. Ea. Qty. Req. Box Replacement Jaws Jaw Assembly, 2-3/8" A/R Jaw Assembly, 2-7/8" A/R Jaw Assembly, 3-1/2" A/R Jaw Assembly, 4-1/2" A/R Jaw Assembly, 5-1/ A/R Replacement Bushings Bushing Assembly, 2-3/8" A/R Bushing Assembly, 2-7/8" A/R Bushing Assembly, 3-1/2" A/R Bushing Assembly, 4-1/2" A/R Bushing Assembly, 5-1/ A/R Replacement Tong Dies N/A Power Tong Die, 2-3/8" x 1" (1.315 ) N/A Power Tong Die, 2-3/8" x 1-1/4" (1.660 ) N/A Power Tong Die, 2-3/8" x 1-1/2" (1.900 ) N/A Power Tong Die, 2-3/8" x 2-1/16" Power Tong Die, 2-3/8" x 2-3/8" N/A Power Tong Die, 2-7/8" x 1 (1.315 ) N/A Power Tong Die, 2-7/8" x 1-1/4" (1.660 ) N/A Power Tong Die, 2-7/8" x 1-1/2" (1.900 ) N/A Power Tong Die, 2-7/8" x 2-1/16" N/A Power Tong Die, 2-7/8" x 2-3/8" Power Tong Die, 2-7/8" x 2-7/8" Tong Die, 3/8" x 1" x 3-7/8" (4-1/2" & 5-1/2 Bushing Only) S Tong Die, 3/8" x 1" x 2-5/8 w/slot (4-1/2" & 5-1/2 Jaw Only) * Interchangeable with: BJ, Carter Tool, Oil Country, 5-1/2 Open Face Tubing Tongs Page 18 sales@rigtool.com (877) fax (817) Cat. 2012

21 58-93R Foster Tubing Tongs Drag Ring Assemblies Cat. # Ref. # Description Wt. Ea. Qty. Req. Box 1-5/16" to 3-1/2" (5" Bore) Drag Ring Assembly (5" Bore, 1" Pin) A/R Drag Ring Pin (1" x 6-1/4") A/R Drag Plug, 1" Long A/R Drag Spring, 7/8" Long A/R Set Screw, 1" x 1" A/R Cover Plate (5" Bore) A/R Guide Bell 1-5/16" to 1-1/2" (1.900") A/R 3-1/2" to 6-1/16" (6-1/4" Bore) Drag Ring Assembly (6-1/4" Bore, 1" Pins) A/R Drag Ring Pin (1" x 6-1/4") A/R Drag Plug, 7/8" Long (Overall = 3/4 ) N/A 5 A/R Drag Spring, 7/8" Long A/R Set Screw, 1/2" x 1" N/A 5 A/R Cover Plate (6-1/4" Bore) N/A 1 A/R Guide Bell (6-1/4" Bore) N/A 1 A/R 4" to 5-1/2" (7-1/4" Bore) Drag Ring Assembly (7-1/4 Bore, 3/4" Pin) A/R Drag Ring Pin (3/4" x 6-1/4") N/A 5 A/R Drag Plug, 5/8" Long A/R Drag Spring, 1/2" Long A/R Set Screw, 1/2" x 1" A/R Cover Plate (7-1/4" Bore) N/A 1 A/R Guide Bell (7-1/4" Bore) N/A 1 A/R 6-5/8" to 7" (7-7/8" Bore) Drag Ring Assembly (7-7/8" Bore: 5/8" Pin) A/R Drag Ring Pin (5/8 x 6 ) A/R Drag Plug, 1/2" Long A/R Drag Spring A/R Set Screw, 1/2" x 1" N/A 5 A/R Cover Plate, 5/8" Pins: 10 (7-7/8" Bore) N/A 1 A/R Guide Bell (7-7/8" Bore) N/A 1 A/R * Interchangeable with: Carter Tool, Gill Services, Oil Country, Tillery & Parks, Closed Head Tubing Tongs Cat sales@rigtool.com (877) fax (817) Page 19

22 58-93R Foster Tubing Tongs Single Action Tubing Jaws & Tong Dies* 1-5/16" to 1-1/2" (1.900") Jaw Assembly Jaw, 1-5/16" to 1-1/2" (1.900") A/R Tong Die, 1", 1-1/4" & 1-1/2" Insert Screw, 3/8" x 2-3/4" w/nut A/R 1-7/8" to 2-3/8" Jaw Assembly Jaw, 1-7/8" to 2-3/8" A/R Tong Die, 2-1/16" Insert Screw, 3/8" x 2-3/4" w/nut A/R 2-3/8" to 2-7/8" Jaw Assembly Jaw, 2-3/8" to 2-7/8" A/R Tong Die, 2-3/8" to 3-1/2" P P Pyramid Tong Die, 2-3/8" to 3-1/2" Insert Screw, 3/8" x 2-3/4" w/nut A/R 2-7/8" to 3-1/2" Jaw Assembly Jaw, 2-7/8" to 3-1/2" A/R Tong Die, 2-3/8" to 3-1/2" P P Pyramid Tong Die 2-3/8" to 3-1/2" Insert Screw, 3/8" x 2-3/4" w/nut A/R 3-1/2" to 4-3/4" Jaw Assembly Jaw, 3-1/2" to 4-3/4" A/R Insert, 3-1/2" to 4-1/2" Insert, 4" to 4-3/4" Insert Screw, 3/8" x 2-3/4" w/nut A/R 5" to 6-1/16" Jaw Assembly Jaw (Solid) A/R * Interchangeable with: Carter Tool, Gill Services, Oil Country, Tillery & Parks, Closed Head Tubing Tongs 58-93R Foster Tubing Tongs Single Action Casing Jaws & Tong Dies* 4" to 4-1/2" Jaw Assembly Jaw, 4" to 4-1/2" A/R Insert, 4" to 4-1/2" N/A Insert, 5-1/2" Insert Screw, 3/8" x 2-3/4" w/nut A/R 6-5/8" to 7" Jaw Assembly Jaw (Solid), 6-5/8" N/A Jaw (Solid), 7" * Interchangeable with: Carter Tool, Gill Services, Oil Country, Tillery & Parks, Closed Head Tubing Tongs Page 20 sales@rigtool.com (877) fax (817) Cat. 2012

23 58-93R Foster Tongs Double Action Tubing Jaws & Tong Dies* 1" to 1-5/16" Jaw Assembly Jaw, 1" to 1-5/16" N/A Insert, 1" to 1-1/16" N/A Insert Screw, 3/8" x 2-3/4" w/nut A/R 2" Jaw Assembly Jaw, 2" Insert, 2" Insert Screw, 3/8" x 2-3/4" w/nut A/R 2-3/8" to 3-11/16" Jaw Assembly Jaw to Double Acting, 2-3/8" to 3-11/16" Insert-Double Acting, 2-3/8" to 3-1/16" Insert-Double Acting, 2-7/8" to 3-1/2" Insert-Double Acting, 3-1/2" Insert-Double Acting, 3-11/16" Insert Screw, 3/8" x 2-3/4" w/nut A/R * Interchangeable with: Carter Tool, Gill Services, Oil Country, Tillery & Parks, Closed Head Tubing Tongs 58-93R Foster Tongs - Cesco/Gill Style Single Action Tubing Jaws & Tong Dies* 1-1" to 2-7/8" Jaw Assembly Use Foster Type Tong Jaws 2-7/8" to 3-1/2" Jaw Assembly J505-2 Jaw, 2-7/8" to 5" (w/1" pin Hole) A/R N505-4 Insert, 2-7/8" to 3-1/2" A/R N507 Insert Screw, 3/8" x 2-3/4" w/nut A/R 3-1/2" to 4-1/2" Jaw Assembly J505-2 Jaw, 2-7/8" to 5" (w/1" pin Hole) A/R N505 Insert, 3-1/2" to 4-1/2" A/R N507 Insert Screw, 3/8" x 2-3/4" w/nut A/R 4" to 5" Jaw Assembly J505-2 Jaw, 2-7/8" to 5" (w/1" pin Hole) A/R N505-1 Insert, 4" to 5" A/R N507 Insert Screw, 3/8" x 2-3/4" w/nut A/R * Interchangeable with: Carter Tool, Gill Services, Oil Country, Tillery & Parks, Closed Head Tubing Tongs Cat sales@rigtool.com (877) fax (817) Page 21

24 58-93R Foster Tongs - Cesco/Gill Style Single Action Casing Jaws & Tong Dies* 4" to 5-1/2" Jaw Assembly J506 Jaw (4" to 5-1/2") w/ 3/4" pin hole A/R N505-2 Insert Casing, 4" to 4-1/2" A/R N505-3 Insert Casing, 5" to 5-1/2" A/R N507-1 Insert Screws, 5/16" w/nuts A/R * Interchangeable with: Carter Tool, Gill Services, Oil Country, Tillery & Parks, Closed Head Tubing Tongs Foster 74 & Drag Ring Assembies* 1" to 3-1/2" Tubing Drag Ring Assembly (5" Bore, 1" Pin) A/R Drag Ring Pin, 5/8 x A/R Drag Spring, 1/2" Long A/R Drag Plug, 1/2" Long A/R Set Screw, 1/2" x 1" A/R Cover Plate (5" bore) A/R Guide Bell (4-3/4 Bore) A/R * Interchangeable with: Carter Tool, Gill Services, Oil Country, Tillery & Parks, Closed Head Tubing Tongs Foster 74 & Tubing Tong Single Action Jaws & Tong Dies* 1" to 1-5/16" Jaw Assembly Jaw (Solid), 1" to 1-5/16" A/R 1-5/8" to 2-1/16" Jaw Assembly Jaw, 1-5/8" to 2-1/16" Tong Dies, 2-3/8" to 2-7/8" Insert Screw A/R 2-3/8" to 2-7/8" Jaw Assembly Jaw, 2-3/8" to 2-7/8" Tong Dies, 2-3/8" to 2-7/8" Insert Screw A/R 3-1/2" (only) Jaw Assembly Jaw (Solid), 3-1/2" A/R * Interchangeable with: Carter Tool, Gill Services, Oil Country, Tillery & Parks, Closed Head Tubing Tongs Page 22 sales@rigtool.com (877) fax (817) Cat. 2012

25 Foster 147 Back-up - Jaws & Tong Dies* 1-5/16" to 2-1/16" Back-up Jaw Assembly Back-Up Jaw, 1-5/16" to 2-1/16" Tong Die, 1" to 1-1/2" Insert Screw, 3/8" x 1" A/R 2-3/8" to 3-3/4" Back-up Jaw Assembly Back-Up Jaw, 2-3/8 to 3-3/ Tong Die, 2-3/8" to 2-7/8" P P Pyramid Tong Die, 2-3/8" to 2-7/8" Insert Screw, 3/8" x 1" A/R 3-1/16" to 4-1/2" Back-up Jaw Assembly Back-up Jaw, 3-1/16" to 4-1/2" Tong Die, 2-3/8" to 2-7/8" P P Pyramid Tong Die, 2-3/8" to 2-7/8" Insert Screw, 3/8" x 1" A/R 4-1/2" to 5-9/16" Back-up Jaw Assembly Back-up Jaw (Solid), 4-1/2" to 5-9/16" A/R 5" to 6-1/16" Back-up Jaw Assembly Back-up Jaw (Solid), 5" to 6-1/16" A/R * Interchangeable with: Carter Tool, Gill Services, Oil Country, Tillery & Parks, Closed Head Tubing Tongs Cat sales@rigtool.com (877) fax (817) Page 23

26 Kelco K-20, K-25, K-30, Replacement Inserts Replacement Inserts for Kelco K Insert f/k-20, 3/4" (1.050") Insert f/k-20, 1" (1.315") Insert f/k-20, 1-1/4" (1.660") Insert f/k-20, 1-1/2" (1.900") Insert f/k-20, 2-1/16" (2.062") Insert f/k-20, 2-3/8" Replacement Inserts for Kelco K Insert f/k-25, 1" (1.315") Insert f/k-25, 1-1/4" (1.660") Insert f/k-25, 1-1/2" (1.900") Insert f/k-25, 2-1/16" Insert f/k-25, 2-3/8" Insert f/ K-25, 2-7/8" Replacement Inserts for Kelco K N/A Insert f/k-30, 3/4" (1.050") N/A Insert f/k-30, 1" (1.315") N/A Insert f/k-30, 1-1/4" (1.660") N/A Insert f/k-30, 1-1/2" (1.990") Insert f/k-30, 2-1/16" Insert f/k-30, 2-3/8" Insert f/k-30, 2-7/8" Insert f/k-30, 3-1/2" Hillman Kelley Power Tongs Replacement Inserts Replacement Inserts for Hillman Kelley 500-C Power Tongs A Jaw/Die Combination F/Hillman Kelley, 3/4" to 1" A Jaw/Die Combination F/Hillman Kelley, 1-1/4" A Jaw/Die Combination F/Hillman Kelley, 1-1/2" to 2-1/16" A Jaw/Die Combination F/Hillman Kelley, 2-3/8" A Jaw/Die Combination F/Hillman Kelley, 2-7/8" Jaw/Die Combination F/Hillman Kelley, 3-1/2" Replacement Inserts for Hillman Kelley Wrap Around Power Tongs R N/A HKWA Insert, 3-1/2" Reg Tooth R N/A HKWA Insert, 2-7/8" Reg Tooth R N/A HKWA Insert, 2-3/8" Reg Tooth R N/A HKWA Insert, 2-1/16" Reg Tooth Standard Hillman Kelley Die, 3/8" x 5/8 x 4-1/2" 0.3 A/R A/R N/A Backup Die, 3/8" x 5/8" x 1-15/16" 0.2 A/R A/R Page 24 sales@rigtool.com (877) fax (817) Cat. 2012

Continental Emsco C-2 rated at 25,000". 60" x 10" water cooled brake flanges. Foster catheads. Airflex low and high clutches. Complete lubrication system.

(2) Continental Emsco FB1600 triplex mud pumps rated at 1,600 HP (2000 input HP) Fully enclosed steel power end. New National Oilwell fluid ends FB 1600 5000 PSI.

GARDNER DENVER 1500E JACKUP RIG(REF#1288M) 1500 HP rig, manufactured 1978, drilling depth 15,000, National Oilwell Varco 350/500 top drive, model JU-45-MS (upgraded), Gardner Denver 1500E drawworks, 80" water depth capacity, 142" x 30" x 3" Lee C Moore Cantiliever mast 1,300,000#, (2) Gardner Denver PZ-10 Triplex mud pump powered by (2) EMD D-79 MB DC traction motors, 37.5" Oilwell rotary table, two speed transmission, powered by one EMD D-79 MB DC traction motor. Currently stacked in Louisiana. PRICE: $4,500,000