pup joint suppliers in uae price

Pup joint is designed and manufactured to adjust height of tubing or casing strings or depth of down-hole tools, and these pup joints are made of seamless steel pipes, and material for pup joint can be available in J55, K55, N80, L80 or P110. Pup joint can be available with tubing pup joint or casing pup joint, sizes of tubing pup joint range from 2⅜ inch to 4½ inch , and casing pup joint range from 4½ inch to 13⅜ inch , thread of pup joint can be 8RD, 10RD or BTC, length of tubingpup joint are often offered in 2ft, 3ft, 4ft, 6ft, 8ft, 10ft and 12ft, length for special purpose can be available as per order. Pup joints are machined with interchangeable Pin & Box thread on two ends or other configuration, one end is equipped with coupling, and another end is protected with closed end thread protector. Nominal weight of tubing pup joint is the same as tubing, and casing pup joint is the same as casing.

Prefabricated Pup joints & fittings are used for temporary operations and removable piping systems. Each component is fitted with wing union ends for fast and easy installation. Commonly used in upstream oil & gas well sites, it can be useful in all industrial applications.

Multiphase oil and gas well effluent, drilling fluids, water, chemicals, abrasive and corrosive fluids, cement, refined hydrocarbons, hydraulic oil, etc.

Each element is serialised and data is engraved onto individual stainless steel collar. Pressure rating is easily identified with stenciled or painted colour band(s) and rating markings.

Six combinations of equal tee fittings are available. When ordering tees, specify your requested position of male and female ends from left to right and perpendicular branch (M for male, F for female) as shown on figure: 1 x 2 x 3.

Special formats may be required in some piping systems such as wyes, laterals and crosses. FCE manufactures special fittings to client requirement comprising special shapes or specific materials.

FTE supplies racked containers to customer requirements which offer easier storage and ergonomic access. Proper racking also provides protection and an easier visual check of piping elements.

The tie-down clamp is one of the piping accessories supplied by Flow Test Equipment. The use of tie-down clamps may protect against severe damage and serious personal injury in case of unexpected failure under pressure and flowing conditions.

Incorrectly tighten union because of damaged threads makes the use and operation unsafe. Essential care by protecting threads during handling will improve your safety level. Hard plastic ACME thread protectors for wing unions are available.

Size : 2 3/8", 2 7/8", 3 1/2", 4 1/2" Type : BOX x PIN, PIN x PIN, BOX x BOX Connection : EUE, NUE, BTC, LTC, STC, Premium Grade : H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125

We are one of the prominent Suppliers and Exporters of Tubing Pup Joints in UAE. Tubing pup joints produced according to API 5CT Specification. Our precision-engineered tubing pup Joints are ideal for spacing out down-hole assemblies and handling the production of tubing accessories. We supply tubing pup joints in all sizes and grades. All our products have passed the ISO certification and API certifications.

We are highly appreciated among our clients for providing the best quality tubing pup joints and other oilfield equipment. Our products are tested numerous times under technical guidance and are made from the best quality material. Standard and non–standard sizes are available as per customer requirements.

The companies listed above have not approved or sponsored Panjiva"s provision of any of the information in these search results. These results are derived from various public and private data sources. These results have not been confirmed by Panjiva and are provided on an "AS IS" basis, as further described in Panjiva"s Terms and Conditions of Use and Panjiva"s Transparency Policy. Your use of the information provided in these results is subject in all respects to those Terms and Conditions of Use.

A short casing or tubing that is used for handling the assemblies of production tubing is called Pup Joints. It is also used for spacing out full length tubing and casing strings. The npst pup joints are non-standard piping lengths that are available in two or five foot increments. However, customization is available on request. Their height can be adjusted of full length tubing and various kinds of drill pipes. The string pipes are assembled with the tubular goods having standard length and they are typically 31 feet in length. The length can be easily adjusted according to the exact requirements. They are quite dependent on the tubular goods with which they mate.

Find tubing pup joints traders in ANSI Sch 40, 80, and 60 with a full set of documentation and sample preservation; see specifications and where it is used.

Before making a purchase, compare the prices of perforated pup joints from two or more reliable GCC suppliers. See What are the benefits of integral pup joint

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

Blesson joined the Kirtanlal International Group in 2017 as the Assistant Sales Manager for the Scaffolding & Formwork Solutions Division and was then promoted to his existing role of BD &Sales Manager in 2019.Blesson has been in the Scaffolding & Formwork Industry for over 15 years having previously worked, most recently as the Assistant Sales Manager of ADSF (Al Dhabi Scaffolding & Formwork)and previously to that he was the SNR Sales Technician at ETS (Emirates Technical Services).A Technical Solution minded Engineer with great industry knowledge and excels at working hand in hand with the clients to ensure they meet their goals.

Salvi is a qualified Mechanical Engineer who joined the Kirtanlal International Group in 2016 as a Technical Design Engineer for the Scaffolding & Formwork Solutions Division. Following a successful 4 years he was then promoted to his existing role of Technical Design Manager in 2020. Salvi has been in the Scaffolding & Formwork Industry for over 15 years having previously worked, most recently as a Technical Engineer with Technocraft Industries Ltd in India, and previously to that he was a Project Engineer in Pranav Construction Ltd.He has thorough knowledge of conceptual Design& Engineering along with hands onSite& Projects management skills. With the experience of both the Engineering and Projects Management, he has the skills  to deliver efficient &cost-effective Scaffolding &Formwork Solutions. Proficient in AutoCAD, Tekla 3D, STAAD, MS-Office and MS Project.

Internal Plastic Coating: Internal plastic coating will be provided according to customer requirements. The coating forms a protective layer in the pipe ID to prevent corrosion and thus extend the life span of the pipe in the drilling environment.

Internal Plastic Coating:Internal plastic coating will be provided according to customer requirements. The coating forms a protective layer in the pipe ID to prevent corrosion and thus extend the life span of the pipe in the drilling environment.

Manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Optional diameters, lengths, weights, and grades are available upon request.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

Upset forging is a process by which a plain end blank is upset at each end to increase the cross section area. We have innovated upsetting by automating our handling table. This automated handling table not only helps us upset at different lengths safely, but also helps us to get pup joints to the highest degree of consistency and accuracy.

The hydro tests all of its pup joints. This non-destructive test uses water pressure and a pressure recorder to determine possible leaks. Our modernized tester can be adjusted to accommodate various lengths of pup joints, and test them at various pressures as required by API and customer specifications.

We has a custom & automated Full Body Ultrasonic Inspection system to inspect its tubing pup joints. We are the first in the industry to build and use a Full Body Ultrasonic Inspection for pup joints to ensure there are no defects on the external and internal surface longitudinal and transverse.

This inspection has greater accuracy than other non destructive tests, one reason is its high penetrating power to allow detection of defects deep in the pup joints. The Full Body UT also has high sensitivity which allows it to detect exceptionally small deficiencies. This inspection ensures that our customers receive the best quality pup joints on the market.

We also manufacture pup joints by profiling from heavy wall mechanical tubing. Profiling of pup joints are done in a high precision and tolerance CNC in order for us to achieve a high level of dimensional tolerances and surface finish.

The wet magnetic particle test is a non-destructive test that detects surface and shallow subsurface defects. Pup joints are inspected for longitudinal and transverse defects using this inspection method.

We have exclusively designed a line which heat treats each pup joint individually. This setup is versatile and dynamic, as it can be adjusted for various lengths of pup joints and modified accordingly. This gives us the advantage of catering to the needs of our customers extremely quickly. All pup joints are re-straightened after heat treat to ensure the highest quality.

CountryAfghanistanAland IslandsAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBosnia and HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBritish Virgin IslandsBruneiBulgariaBurkina FasoBurundiCambodiaCameroonCanadaCape VerdeCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos (Keeling) IslandsColombiaComorosCongo (Brazzaville)Congo (Kinshasa)Cook IslandsCosta RicaCroatiaCubaCuraçaoCyprusCzech RepublicDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEthiopiaFalkland IslandsFaroe IslandsFijiFinlandFranceFrench GuianaFrench PolynesiaFrench Southern TerritoriesGabonGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHeard Island and McDonald IslandsHondurasHong Kong S.A.R., ChinaHungaryIcelandIndiaIndonesiaIranIraqIrelandIsle of ManIsraelItalyIvory CoastJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKuwaitKyrgyzstanLaosLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacao S.A.R., ChinaMacedoniaMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNetherlands AntillesNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorthern Mariana IslandsNorth KoreaNorwayOmanPakistanPalauPalestinian TerritoryPanamaPapua New GuineaParaguayPeruPhilippinesPitcairnPolandPortugalPuerto RicoQatarReunionRomaniaRussiaRwandaSaint BarthélemySaint HelenaSaint Kitts and NevisSaint LuciaSaint Martin (French part)Saint Pierre and MiquelonSaint Vincent and the GrenadinesSamoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSouth Georgia and the South Sandwich IslandsSouth KoreaSpainSri LankaSudanSurinameSvalbard and Jan MayenSwazilandSwedenSwitzerlandSyriaTaiwanTajikistanTanzaniaThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkeyTurkmenistanTurks and Caicos IslandsTuvaluU.S. Virgin IslandsUgandaUkraineUnited Arab EmiratesUnited KingdomUnited StatesUnited States Minor Outlying IslandsUruguayUzbekistanVanuatuVaticanVenezuelaVietnamWallis and FutunaWestern SaharaYemenZambiaZimbabwe

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Integral pup joints are tubes with two ends made up of high-quality alloy steel. This pup joint works well in high flow pressure applications and has great working capacity. If you are facing any issue with the flow in your piping system, installing a pup joint can help. You can buy integral pup joints online from our website enggpro. Com. Enggpro is a global marketplace for engineering equipment and services that precisely provide leads for engineering products. You can find reliable integral pup joint suppliers and manufacturers here and connect with them without any hindrance. You will not only get the premium quality goods here but also the best prices ever with our E-auction option where you can negotiate with them and have your hands on the desired products. You will also get to connect with the integral pup joint exporters from India, the USA, the Middle East, Europe and other Asian countries. Why go somewhere else, when you can have everything sorted on one single platform.

BHT Forge Manufacturers In 2 Inch Fig 1502 Cushion Elbow M X F Sour Service To adopt world class manufacturing facilies & methods for meeting international quality standards to cater customer need...

One stop answer for prepared to utilize or collected machined forging.All majar activities are acted in-house to guarantee zero defect.Fast improvement and adaptability in arranging is finished by exp...

2 INch Fig 1502 Tee M X F X F Sour Service, 2" Fig 1502 Tee M X F X F Sour Service, 3 Inch Fig 1502 Tee. One stop solution for ready to use or assembled machined forging.All majar operations are ...

2 Inch Fig 1502 Cushion Elbow M X F Standard Service, 2 Inch Fig 1502 Cushion Elbow M X F,2"Fig 1502 Cushion Elbow M X F,2 Inch Fig 1502 Cushion Elbbow Male X Female our Young Chairman advising ,...

2 Fig 1502 Cushion Elbow M X F Standard Service The Company Vision is to become the Best in the industry in near future with a mission to provide what the customer needs and even more in terms of srvi...

2 Inch Fig 1502 Cushion Elbow M X F Standrad Service, 2 Inch Fig 1502 Tee,2"Fig 1502 Tee, 2 Inch Fig 1502 Tee M X F X F Metallurgists Team Completely Focus on Chemical Composition and Specificati...

2 Fig 1502 Cushion Elbow M X F Standard Service The Company Vision is to become the Best in the industry in near future with a mission to provide what the customer needs and even more in terms of srvi...

These J55, L80, N80Q & P110 pup joints are manufactured from seamless Grade J-55, L80 N80Q and P110 mechanical tubing. The API 5CT tubing pup joint is mainly used to adjust the height of the tubing strings. It is also used to adjust the depth of down-hole tools.

Shanghai Hilong Shine New Material Co is the only R&D-oriented production enterprise in China specialising in oilfield-dedicated coating materials and new materials. It supplies the Hilong Petroleum Company in Abu Dhabi with its world-class Tube Coat range of interior anti-corrosion special coating materials for drill pipes, casing, and tubing. In turn, Hilong Petroleum Pipe Company has an advanced steel pipe interior and exterior coating production line with an annual designed coating area exceeding eight million m².