pup joint suppliers in uae pricelist

We are one of the prominent Suppliers and Exporters of Tubing Pup Joints in UAE. Tubing pup joints produced according to API 5CT Specification. Our precision-engineered tubing pup Joints are ideal for spacing out down-hole assemblies and handling the production of tubing accessories. We supply tubing pup joints in all sizes and grades. All our products have passed the ISO certification and API certifications.

We are highly appreciated among our clients for providing the best quality tubing pup joints and other oilfield equipment. Our products are tested numerous times under technical guidance and are made from the best quality material. Standard and non–standard sizes are available as per customer requirements.

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

Manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Optional diameters, lengths, weights, and grades are available upon request.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

Upset forging is a process by which a plain end blank is upset at each end to increase the cross section area. We have innovated upsetting by automating our handling table. This automated handling table not only helps us upset at different lengths safely, but also helps us to get pup joints to the highest degree of consistency and accuracy.

The hydro tests all of its pup joints. This non-destructive test uses water pressure and a pressure recorder to determine possible leaks. Our modernized tester can be adjusted to accommodate various lengths of pup joints, and test them at various pressures as required by API and customer specifications.

We has a custom & automated Full Body Ultrasonic Inspection system to inspect its tubing pup joints. We are the first in the industry to build and use a Full Body Ultrasonic Inspection for pup joints to ensure there are no defects on the external and internal surface longitudinal and transverse.

This inspection has greater accuracy than other non destructive tests, one reason is its high penetrating power to allow detection of defects deep in the pup joints. The Full Body UT also has high sensitivity which allows it to detect exceptionally small deficiencies. This inspection ensures that our customers receive the best quality pup joints on the market.

We also manufacture pup joints by profiling from heavy wall mechanical tubing. Profiling of pup joints are done in a high precision and tolerance CNC in order for us to achieve a high level of dimensional tolerances and surface finish.

The wet magnetic particle test is a non-destructive test that detects surface and shallow subsurface defects. Pup joints are inspected for longitudinal and transverse defects using this inspection method.

We have exclusively designed a line which heat treats each pup joint individually. This setup is versatile and dynamic, as it can be adjusted for various lengths of pup joints and modified accordingly. This gives us the advantage of catering to the needs of our customers extremely quickly. All pup joints are re-straightened after heat treat to ensure the highest quality.

Integral pup joints are tubes with two ends made up of high-quality alloy steel. This pup joint works well in high flow pressure applications and has great working capacity. If you are facing any issue with the flow in your piping system, installing a pup joint can help. You can buy integral pup joints online from our website enggpro. Com. Enggpro is a global marketplace for engineering equipment and services that precisely provide leads for engineering products. You can find reliable integral pup joint suppliers and manufacturers here and connect with them without any hindrance. You will not only get the premium quality goods here but also the best prices ever with our E-auction option where you can negotiate with them and have your hands on the desired products. You will also get to connect with the integral pup joint exporters from India, the USA, the Middle East, Europe and other Asian countries. Why go somewhere else, when you can have everything sorted on one single platform.

Gautam Budh Nagar Villa No 67, Lotus Villas Society, Opp Kc International School Jalpura Greater Noida, Gautam Budh Nagar - 201306, Dist. Gautam Budh Nagar, Uttar Pradesh

Nr. SBI, Mamsa GIDC, Bhavnagar Survey No. 174, Plot No. 23,Mamsa-364070, TA-Ghogha, Dist. Bhavnagar (Guj.) India, Nr. SBI, Mamsa GIDC,, Bhavnagar - 364002, Dist. Bhavnagar, Gujarat

Vasai East, Vasai, Dist. Thane Gala No. 7, Bldg No. A, Swami Industrial Centre, Gaurai Pads, Vasai East, District Palghar, Vasai East, Vasai - 401208, Dist. Thane, Maharashtra

Windlass manufactures Pup Joints with integral hammer lug union end connections. This enables faster, easier make-up and break-out of temporary flow lines.

Taluka Wada, Palghar, Dist. Thane Survey No. 23/1, 25/1, 25/2, Village Vasuri(Khurd), Behind Blue Star,, Taluka Wada, Palghar - 421312, Dist. Thane, Maharashtra

ADFO manufactures Pup Joints with Integral Hammer Union end connections.These Pup Joints are used on high pressure discharge lines, choke and kill lines, auxiliary flow and other applications.

Meerut Road Industrial Area, Ghaziabad C-23, Meerut Road Industrial Area, Meerut Road Industrial Area, Ghaziabad - 201003, Dist. Ghaziabad, Uttar Pradesh

Prithviraj Industries manufactures Pup Joints up to 20, 000 psi cold working pressure in sizes: 1, 11 /2, 2, 3, and 4-inch bore sizes, lengths to 20 feet.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

One of the leading manufacturers and suppliers specializing in this product in China, supply a wide variety of accessories consists of our one-stop sales. The integrated sales & service ensures customers with various demands an easier access for purchasing management.

We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

A pup joint is a pipe without standard length. API SPEC 5CT pup joints are used to adjust the height of full length tubing or casing strings to exact requirement. They are also applied to adjust the depth of downhole tools. In order to cater to the needs of customers, JST is offering a broad range of API SPEC 5CT OCTG pup joints.

2.With our sophisticated manufacturing facility, we produce these joints by using high grade raw materials (which are sourced from vendors of high repute) and cutting edge technology to ensure their sturdy design and longer functionality.

5.Locating on site gives the operator the flexibility of adjusting location depths of downhole assemblies, such as spacing out tubing hanger when sealing.

Jiangyin Changjiang Steel Tube Making Factory is a leading manufacturer and supplier of seamless steel pipes and various special pipes in China. We mainly manufacture structure pipe, fluid pipe, high pressure boiler pipe, API pipe, marine pipe, alloy pipe, tubing, casing, line pipe, OCTG pup joint (such as API SPEC 5CT pup joint), etc. Our company sets up a steel tube technology R & D center with advanced pipe testing equipment. Through strict testing process, we are able to produce high quality steel pipes for customers. Our products have been exported to the Middle East, CIS, Southeast Asia, Africa, South America, North America, Europe, Australia and many other countries and regions.

Pup joint is designed and manufactured to adjust height of tubing or casing strings or depth of down-hole tools, and these pup joints are made of seamless steel pipes, and material for pup joint can be available in J55, K55, N80, L80 or P110. Pup joint can be available with tubing pup joint or casing pup joint, sizes of tubing pup joint range from 2⅜ inch to 4½ inch , and casing pup joint range from 4½ inch to 13⅜ inch , thread of pup joint can be 8RD, 10RD or BTC, length of tubingpup joint are often offered in 2ft, 3ft, 4ft, 6ft, 8ft, 10ft and 12ft, length for special purpose can be available as per order. Pup joints are machined with interchangeable Pin & Box thread on two ends or other configuration, one end is equipped with coupling, and another end is protected with closed end thread protector. Nominal weight of tubing pup joint is the same as tubing, and casing pup joint is the same as casing.

15.2. Company Profiles [Company Overview, Product Portfolio, Financial Information, (Subject to Data Availability), Business Strategies / Recent Developments]

Pipe system involves various components, including perforated pup joints and are made from different materials. We offer wholesale perforated pup joints to create a smooth channel for the pipe systems in both commercial and residential areas.

The materials used depend on the type of fluids it will convey. One of the more commonly used types is PVC fittings. Features of the PVC pipe fittings that make an appropriate is the allowance for a smoother wall surface which decreases resistance to the flow. It is also lightweight and cost-effective.

On the other hand, copper fittings are corrosion-resistant. As such, they have a higher tolerance to external factors. That makes copper pipe fittings a good option to adopt for underground plumbing.

Apart from materials, there are also other components of the pipe fittings to note. P-traps prevent odor by retaining a small pool of water to stop sewer gases from entering the bathroom. Pipe caps cover the end of pipes to stop the fluid flow and protect pipe threads.

The usage of the pipes plays a crucial role in the materials suitable. For manufacturing, pipes will need to be able to withstand the fluids conveyed. We provide solutions from pipe bends to copper pipe compression fittings for any piping system required.

ANSON API.6A ‘Top Entry’ Check Valves are manufactured to a high specification from closed die forged steel bodies with 17/4 ph stainless steel internals.

More Subsea Oil and Gas Companies, Products, Projects, Drilling Rigs and JobsUnderwater WeldingQuick Guide: What is underwater welding and how to get underwater welding jobs! What is Underwater Welding? Underwater welding, a term for methods adapted for subsea welding, for the purpose of repairing damage to ships…

ROVOTICSRovotics is based in the United Arab Emirates , Rovotics was formed in 2011 when a group of experienced ROV technical experts felt the market was lacking advanced systems that harnessed the latest technology, provided…

Rio de Janeiro, BrazilRio de Janeiro, Brazil is a city in Brazil, and the capital of the state of Rio de Janeiro, located on the west side of the entrance to Baía de Guanabara. The metropolitan region has…

Jakarta, IndonesiaJakarta, the capital and largest city of Indonesia, on the northwest coast of Java, at the mouth of the Ciliwung River. Jakarta is a separate metropolitan area with provincial status. The urban area has grown into…

List of Oil and Gas Companies in Dubai, UAEThe oil and gas companies are in Dubai, which is located at the southern end of the Persian Gulf, between Abu Dhabi and Sharjah, in the Arabian Desert. A small area belonging to Dubai, Al…

Perth, AustraliaPerth is the oil capital and the largest city in Australia"s largest state Western Australia. Perth"s 1.5 million inhabitants correspond to more than two thirds of the state"s inhabitants. Western Australia is one-third the size…

Directional DrillingQuick Guide: What is directional drilling and how to get directional drilling jobs! What is Directional Drilling? Directional drilling or deviation drilling is an oil and gas exploration drilling technique used to change the direction…

ANSON API.6A ‘Top Entry’ Check Valves are manufactured to a high specification from closed die forged steel bodies with 17/4 ph stainless steel internals.

More Subsea Oil and Gas Companies, Products, Projects, Drilling Rigs and JobsList of Oil and Gas Companies in Dubai, UAEThe oil and gas companies are in Dubai, which is located at the southern end of the Persian Gulf, between Abu Dhabi and Sharjah, in the Arabian Desert. A small area belonging to Dubai, Al…

Underwater WeldingQuick Guide: What is underwater welding and how to get underwater welding jobs! What is Underwater Welding? Underwater welding, a term for methods adapted for subsea welding, for the purpose of repairing damage to ships…

Directional DrillingQuick Guide: What is directional drilling and how to get directional drilling jobs! What is Directional Drilling? Directional drilling or deviation drilling is an oil and gas exploration drilling technique used to change the direction…

Rio de Janeiro, BrazilRio de Janeiro, Brazil is a city in Brazil, and the capital of the state of Rio de Janeiro, located on the west side of the entrance to Baía de Guanabara. The metropolitan region has…

Jakarta, IndonesiaJakarta, the capital and largest city of Indonesia, on the northwest coast of Java, at the mouth of the Ciliwung River. Jakarta is a separate metropolitan area with provincial status. The urban area has grown into…

Perth, AustraliaPerth is the oil capital and the largest city in Australia"s largest state Western Australia. Perth"s 1.5 million inhabitants correspond to more than two thirds of the state"s inhabitants. Western Australia is one-third the size…

ROVOTICSRovotics is based in the United Arab Emirates , Rovotics was formed in 2011 when a group of experienced ROV technical experts felt the market was lacking advanced systems that harnessed the latest technology, provided…

FacilityLocated on 15 acres in Northwest Houston the facility encompasses 36,000 square feet of manufacturing space supported by 66,000 square feet of warehouse, processing operations, quality control lab and offices.In addition there is 25,000 square feet in the front offices for a total of 127,000 square feet.

Machine ShopOur state of the art machine shop is fully air conditioned, naturally lit, and features a number of new CNC machines, including two Mazak ST80 CNC lathes with 22” spindles.

ThreadsStewart Tubular Products has extensive experience in both Premium and standard API threading. Our capabilities include four threading lines for full length OCTG. We are licensed to cut TenarisHydril, ULTRA, GB Tubular, Metal One, Houston International Specialty (HIS) and API connections.

ProductsStewart Tubular Products is well known for our expertise in manufacturing downhole tubular accessories and support equipment. We are equally skilled in “machine per print” custom manufacturing.

Customer ServiceOur experienced sales team provides a level of customer service that is unmatched in the industry. Sales people receive extensive training in all aspects of the business, including specifications, materials, manufacturing methods, testing, and inspection.

QualityFrom the company’s inception we have made substantial investments of time and money in our quality program. This long term commitment to quality is perhaps best illustrated by the certification of our quality management system in 2014 to specifications ISO 9001 and API Q1.

Pup Joint Inc. is a machine shop that sells down hole tubular and casing accessories and equipment. We are a leading supplier of pup joints & accessories with API5CT & premium threads at very competitive prices. Our machine shop is a threading facility for all your threading & precision machining needs. PJI commenced operations in Houma, LA in July of 1997. Our staff has over 65 years of combined experience supplying quality products & services to the oil & gas industry.