6 inch rotary table supplier

Note: 4" table has 3 (not 6 as pictured) T-slots. Our Tables are made of high density Meehanite. These Rotary Tables are popular for their excellent perfor-mance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Precision ground top plate and general careful construction ensure highest accuracy. Table graduated 360 degrees. Worm gear reduction ratio is 1 : 90 and the gear can be quickly disengaged for rapid indexing. One turn of the handle moves the table through 4 degrees. Micro collar is graduated in steps of 1 minute. Vernier scale makes settings down to 10 seconds possible.

6 inch rotary table supplier

WARNING:WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos For more information go tohttps://www.p65warnings.ca.gov/

6 inch rotary table supplier

The mill rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring, etc. The rotary turn table for milling machine is made from casting with high quality, can work with a set of dividing plate.

Both vertical and horizontal with two functions. Circle cutting, indexing drilling, milling and more complicated work are possible when the vertical position of the table is used together with the tail part.

Three dividing plate set(Plate "A" - 15, 16, 17, 18, 19, 20 Plate "B" - 21, 23, 27, 29, 31, 33 Plate "C" - 37, 39, 41, 43, 47, 49). A set of wrench and screws are free for you with your installation.

6 inch rotary table supplier

This 6" horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The cast iron table is precision machined in Taiwan and has a #2 Morse taper center hole. This 6" rotary table is graduated with a 360° scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. This horizontal/vertical rotary table has lock down clamps and the crank can be disengaged.

6 inch rotary table supplier

This listing features our most popular size of rotary table that we sell. It is from the VERTEX factory in Taiwan and is manufactured to strict specs of high density Meehanite casting. It is inspected by the HEIDENHAIN process and is guaranteed flat and parallel. 4 slots allow for easy mounting of work, or it can also accomodate a 5 inch 3 jaw chuck. Also available are dividing plates and a tail stock . Overall height is 3.11 inches and the unit ships at 28 lbs

6 inch rotary table supplier

The VH-6 is the smallest rotary table we offer featuring 6.3" (160mm) diameter spindle with a 1.5" through hole. The VH-6 features a newly designed pneumatic braking system which offers 120 ft-lbs of brake holding. The VH-6 maintains a rigid design with dual bearings both in the front and rear of the spindle. The centerline is 5.5". There is an optional 6" 3-Jaw chuck and adapter plate available as well as a 5C nose piece with either manual or air collet closer.

The Index Designs VH-6 is a true 4th-axis rotary table that comescomplete with compatible servo motor, and 9" extension cables ready to plug into you 4th-axis ready CNC machine.

For machines that are not 4th-axis ready: Add 4th-axis kit for each rotary table. Kit includes all parts necessary to make CNC machine 4th-axis ready. Prices vary by machine. Call for quote. Does not include installation.