walter rotary table manufacturer

The 2-axes NC-dividing head TANiH2S-Evolution , with its two full CNC axes, is characterised by the highest efficiency with a very compact design. The WALTER TRIPLEX CLAMPING SYSTEM and the option of having a direct measuring system in both of the axes gives you the highest precision and effectivity in your production of parts and subassemblies. Together with the 3 axes of the machine or machining centre, a full 5-axes machining can be realised.NC controlled tilting range from -5° – +95°

The 2-axes NC-dividing head TANiH2-S evolution-XS. The rotation axis without a counter bearing is suitable for mediumheavy machining forces and gives you the value to reach the component from 4 sides! A full 5-axes machining can be realised. The option of having a direct measuring system in both of the axes gives you the highest precision and effectivity in your production of parts and subassemblies.NC controlled tilting range from +120°/-120

Employing our TAD series dividing heads with torque-motor (direct drive) offers you new manufacturing possibilities, due to the high speed and dynamic movement. The encoder is mounted directly to the spindle, which eliminates any kind of backlash. These units are available as table top versions (TAD) or built-in version (TED).Highly dynamic units with accelaration up to 20.000°/sec²

RTN Rotary tables, with a horizontal, non-lifting faceplate, are designed for use on NC-controlled machine-tools and machining- centres. Face-plate diameter ranging from Ø250 mm up to Ø2.000 mm.acceptance of high machining forces

The manual tiltable NC-dividing head TANiP-S, allows for a free inclination of the whole unit from a horizontal to a vertical position. The option of a reduction gear drive enables an easier handling. The exact tilting position can be determined by a nonius. Adigital readout is available as option.Inclinable from 0° – 90°

The indexing units in the VTW series are manual indexing devices with a stable construction and low height, for rapid and simple manual indexing. The required indexing angle can be engaged rapidly and directly by means of the built-in indexing plate. The standard indexing plate with 24 notches permits 15° divisions.Special indexing plates are available.Hardened and ground indexing spindle with high precision runout

The tailstock series RSe is designed to meet the requirements of modern manufacturing technologies. Functionallity for the use on state of the art machining centres as well as a stable and rigid design are the main aimof these units. These tailstocks can be used either in right- or left hand design. Hydraulic or pneumtic options for automatic movement and clamping are available. Standard centre heights ranging from 80 to 320 mm.Rigid design with big handwheel

Programmable CNC positioning controller type CPS or CDS, providing special functions adapted to rotary tables or dividing heads with position controlled drive systems. Easy and comfortable programming and operation due to menue assisted sequences. Automatic clamping and control, processing.

Walter Horizontal Tilting Rotary Table RTS 400-HP-A 16" Electric Tilting rotary table. SN:2888. Rotary Table manual with digital readout resolution to 0.0005/1 arc second. Vernier tilt. New cost was $19000.00

For over 50 years, Pfiffner has been developing rotary transfer machines that offer high precision and flexibility, marketing the most cost-effective solutions for high-volume workpieces. Thanks to our solution-oriented approach, well-developed expertise in the market, and a passionate innovative spirit, we"ve established ourselves as a leading partner for innovative industry sectors all around the world. Our success is based on a clear vision: We always remain a leap ahead of the times, ensuring satisfied customers every single day.