5c collet rotary table quotation

The AR-5c is TJR’s pneumatic collet rotary table that employs a pneumatic brake and 5c collet closer system. This unit is an affordable solution for customers who require a 5c collet for their workpiece as an alternative to a 3 or 4 jaw chuck.

The AR-5c collet rotary table can be integrated into a CNC machine control as a full 4th axis or it can be operated as an indexer by utilizing TJR’s SAC (Single Axis Controller).  In addition this series is offered in Right Handed and Left Handed motor mount configurations with a powerful pneumatic braking system.

The AR-5c unit is manufactured with a radial-axial preloaded bearing system for high rigidity that can perform light or heavy cutting. The AR-Series uses a dual lead worm shaft and worm gear to ensure long term indexing accuracy in both directions.

5c collet rotary table quotation

A65C, A 5C Collet Chuck for use with your Haas HRTA6 Rotary Table. Must Purchase an A6AC Pneumatic Draw Tube Assembly Separately to Actuate the Collet.

5c collet rotary table quotation

Kalamazoo Industries Inc. Industrial 5C Collet Fixtures come in various configurations from stationary manual , index and air operated 5C collet holders .

5c collet rotary table quotation

With the A6AC, collets can be clamped with the flip of a lever. The A6AC provides up to 5000 lb (22,242 N) of draw force, with 0.125" (3.18 mm) of travel. Clamping force is spring actuated and adjustable to 100 ft-lb (135 Nm). The A6AC tightens from the rear, and has a 1.75" (44.5 mm) through-hole.

The adapter from the draw tube to the collet is included with this collet chuck. The 5C spindle adapter has a 2-3/16"-10 threaded nose, which can be used for oversized collets, collet chucks, and small fixtures. All required hardware is supplied by Haas.

5c collet rotary table quotation

ATS Systems is a national leading machine tool accessories and automation supplier delivering reliable solutions with unwavering support that increases manufacturing productivity and throughput leading to profitable results for its customers. For over 20 years, ATS has installed over 135K machine tool accessories and automation systems allowing customers to achieve productivity gains of over 50% and increasing profitability.

5c collet rotary table quotation

The Stallion Hybrid Trunnion Table allows manufacturers to maximize the efficiency of their vertical machining center and rotary table. Every time a part is handled or indicated, there is an increased risk of scrapping it. The Stallion Trunnion Table minimizes this risk through 4th axis milling. With full 360-degree rotation, machining multiple sides of a part becomes possible, allowing your operators to handle a part as little as necessary. The Stallion Hybrid includes a pneumatic braking system as well as a 5c collet chuck (or other chuck, vise, and work-holding of your choice) located on the outboard support. The chuck rotates with your rotary table and eliminates the need to remove the Trunnion Table for other work-holding options.