cnc rotary table repair quotation

We offer quick turnaround and since all repairs and maintenance are performed locally, it reduces your down time. We diagnose, rebuild and repair each machine to restore it to optimal performance. All services are performed by knowledgeable, courteous, local Haas factory-certified service technicians to ensure that your CNC rotary table repair service is done according to manufacturer standards.

Productivity offers rotary table preventive maintenance that includes motor checks, backlash adjustments, flushing and replacement of lubricant and replacement of O-rings and seals. We also offer full service electronic repair of servo control units and cables.

The original Fadal rotary heads are still one of the best overall designed attachments for the Fadal machine. While there are many imported rotary heads that might "look good" on the outside, it"s the inside that really counts. The simple fact is the Fadal rotary tables were specifically designed to take a crash and keep on working.

Many different rotary heads were made throughout the years of production. A 4th or 5th rotary axis was one of the most popular machine options. In the early 90"s we started shipping all machines "4th axis ready" which means the machine has all the wiring necessary. You basically only needed an amplifier and a axis controller card with software. Contact us if you thinking of adding a 4th axis, we offer all the necessary components.

The very first rotary table sold that was sold on the VMC45 in 1981. It was designed and manufactured by Fadal for the VMC45, it never realized full production after production the VMC45 was stopped.

Troyke Mfg. Co. - Afterwards, with the introduction of the VMC40 in 1984, we began offering the TROYKE rotary products as a 4th axis option. The table had an interesting full contact bearing surface using Turcite between the faceplate and the casting with radial bearings support for the faceplate spindle. Few of these units still remain in the field today. If needed, we can provide complete service for these units.

Soon after 1987, we started adapting many of the popular Japanese rotary tables. Some customers would send us their tables and we adapt our motors and 4th axis interface to them. Eventually we started adding the Tsudakoma, Tecnara and Nikken rotary tables as a direct option to all machines.

VH65 - After years of installing and also repairing the many various manufactures rotary tables we sold, we learned what different designs worked and didn"t work in the machines. The second rotary head Fadal designed was the VH65. The VH65 stands for Vertical or Horizontal mount and 6.5" diameter faceplate.

TR65 - The TR65 (Tilt/Rotate, 6.5" dia. faceplate) had a unique clutch system build into the trunion for the B-axis. One of the biggest problems with 5-axis programming was that is was easier to crash than to program. And a B-axis crash usually resulted in the customer having to return the unit for repair. With this unique design, if the Z-axis crashed into the part, instead of damaging the gears it would simply slip the trunion clutch. The CNC knows the exact position of the B-axis because of the rotary scale feedback that is directly attached to the trunion and not the motor. The addition of the trunion clutch was so important because it virtually eliminated the disruption of operation for a service call.

C). Face plate spindle damage, we had one unit that actually collapsed part of the spindle shaft. Fortunately, we were able to repair the spindle, potentially saving the customer the cost of replacing the entire face plate spindle.

You will receive an estimate of repair 5-10 days (depending on workload) after receiving rotary unit. Repairs take an average of 10 to 30 working days after receiving approval. Evaluation charge of $500.00 will apply if you do not get it done.

Your rotary unit is repaired, reassembled and run in for 10 hours. It is then re-inspected, all final adjustments and calibrations are performed to the original manufactures specification. We warranty our complete Rebuilds for 1 year.

As you can see we are the most qualified to tune-up or rebuild your rotary table. Having been there from the beginning, we know exactly what your table needs to bring it up to original specifications. Simply call Toll Free 1-800-342-3475 for any questions.

Hofmann Rotary Tables has developed a solid reputation for high-quality and affordable indexing devices, rotary tables, and tailstocks. Superior Spindle is proud to be a factory service partner for all, including the HPRS, HTH, R, and WR series.

When you experience issues with your Hofmann products, you can count on our ISO-certified and factory-trained technicians at Superior Spindle. We can repair all types of NC and manual indexing devices, tailstocks, and chuck stands.Our average turnaround time is usually between 10 and 14 business days.

We know that downtime is costly and strive to repair your equipment as quickly as possible. If you’re in an emergency situation, we also provide expedited repair services (based on part availability) with a turnaround time between 1 and 3 business days.

Our Repair ProcessDisassembly &  Free Evaluation: When you send your Hofmann rotary table to us, our team will fully disassemble it in our HEPA Class 10,000 cleanroom and evaluate all components for signs of wear and tear or damage.

Repairs: Once you accept your quote, our team will get to work repairing and replacing components, including handles, spears, worm drives, bearings, and more.

Testing & Inspection: After repairs are complete, our team tests the rotary table to ensure optimal performance. Before your table is shipped back to you, our Quality Assurance team will perform a final inspection.

Shipping: All shipping and handling is covered by Superior Spindle. When you receive your newly refurbished table, we will provide you with a list of all components that were repaired/replaced as well as recommended maintenance.

Ourcutting-edge facility allows us to offer a wide array of additional services. Beyond our standard and expedited Hofmann rotary table repairs, we also provide vibration analysis, engineering recommendations, and retrofitting. Superior Spindle understands precision and is able to hold tolerances to 1 micron.

At Superior Spindle, our top priority is your satisfaction. As an ISO-certified business, we ensure quality every step of that way, offer exceptional turnaround times, and back every repair with a peace-of-mind warranty.

Superior Spindle has been a trusted provider of Hofmann rotary table repairs for over a decade and provides services to manufacturers throughout North America. If you’re experiencing issues with your rotary table, or are looking for design upgrade recommendations, call (734) 224-4778 orfill out our online formtoday.

CNC TOOLS provides an exchange credit for most defective items. Our exchange program provides you with savings and keep us stocked for the next time you order. A repairable unit will need to be evaluated to approve full exchange credit.

CNC TOOLS can restore your non-working unit to remanufactured conditions. Our Technicians have extensive experience with most manufacturers and apply rigorous testing procedures to ensure parts are fully functional to manufacturer specs.

CNC TOOLS provides 12-Month Warranty to most NEW and Refurbished products unless otherwise specified. If the unit fails within the warranty period we will evaluate, repair or replace no questions asks. We stand behind our products to help customers minimize machine downtime.

CNC TOOLS provides an exchange credit for most defective items. Our exchange program provides you with savings and keep us stocked for the next time you order. A repairable unit will need to be evaluated to approve full exchange credit.

CNC TOOLS can restore your non-working unit to remanufactured conditions. Our Technicians have extensive experience with most manufacturers and apply rigorous testing procedures to ensure parts are fully functional to manufacturer specs.

CNC TOOLS provides 12-Month Warranty to most NEW and Refurbished products unless otherwise specified. If the unit fails within the warranty period we will evaluate, repair or replace no questions asks. We stand behind our products to help customers minimize machine downtime.

We believe that our wealth of experience and our passion for quality makes Midland Engineering the best choice when it comes to the repair of your rotary table. We understand the need for a quality assured repair service with a focus on keeping downtime to a minimum.

We have experienced engineers based throughout the UK who are available to travel worldwide, we also have a premises here in Chesterfield just off of the M1 where we carry out in house repairs and refurbishments.

Yuasa has been a major provider of CNC rotary products for decades. They can be found in large as well as in small facilities throughout the North American continent. Potomac Electric has recently added Yuasa UDNC-M1 (single-axis) and UDNC-M2 (dual-axis) rotary table programmable controllers to its CNC Repair Services line. Both controllers utilize Delta Tau"s PMAC x/y controller and Delta Tau Geo drive. Potomac Electric has been repairing Delta Tau controllers, drives, and accessories for over 15 years.

We are a small business and we understand the difficulty and cost of maintaining your CNC machinery. Please drop us a note on our Rotary Table Repair Inquiry and Quotes page with any questions.

The largest B type model from Nikken with motor mounted to the rear, with higher gear ratio over earlier models increases speed over the vertically mounted motor version type CNC-400V. This unit also has a hydraulic clamping system. The unit has a 130mm spindle nose location with a location depth of 12mm with 105mm directly through the table and a has a centre height of 230mm in the vertical position. This device in the first instance is a vertical mount only device with options for a side mount motor, version which can be found under product code CNC-400V. An excellent carrying capacity of 250kg vertically unsupported and 500kg between centres with a standard tailstock with rotation speeds up to 22. 2rpm dependent on motor selection. (example given is with a 2000rpm motor)Net weight of this device is around 280kgThe Nikken CNC-401B rotary table is offered without motor and can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface”) (motor, switch, cable and connector requirements if you already have a “4th axis interface” in the machine) and machine interface costs (if you do not have the additional axis fitted). Motor is mounted to the rear via the right hand side on this device and is designed to avoid restriction to the Y axis capability and with a large bore available should you want to machine long bar components that need to be mounted through the centre. Please remember however, that being a back mount device the centre bore is restricted to passing through only the depth of the casting (240mm)This range of Nikken devices have Tungsten carbide worm shafts and hardened wheels which can mean less backlash adjustment required over a conventional brass/bronze standard gear.

At CNCROTARY.COM we offer a bespoke collect, repair and delivery service for most makes, models and designs of ballscrew or spindle at exceptionally competitive pricing. Call us for a free collection and quotation with no obligation.

We now offer toolchanger CAM box repairs. Where manufacturers will only look to sell you a new device, we can help. Contact us for a no-obligation conversation and price guide.

And finally, a great deal of attention was devoted to the service friendliness of CNC rotary tables from pL LEHMANN in order to keep downtime as brief as possible. Thanks to sensors and electronic applications, every partner can, in an emergency, receive support directly from headquarters via teleservice. Or the customer is advised in advance to perform maintenance, depending on the usage. Real industry 4.0 / smart factory.

The standard CNC rotary tables are also called the 4th axis or 4-axis rotary tables. The 4th axis refers to the rotational axis, their most important feature. It upgrades an existing machine tool with x, y, z dimensions by adding an additional axis

By keeping track with the market developments, we are occupied in offering an extensive range of Rotary Table Tailstock. Designed and developed using world class components with the help of latest technology, this product are widely demanded in the market. This range of Rotary Table Tailstock is available at very reasonableread more...

With the advancement in the technology, we have been able to serve our valued clients with a wide range of Nikken Rotary Table These tools are checked by the expert team of quality controllers to make sure that they are in compliance with the industrial standards. Our clients can avail these tools in different grades andread more...

It is support unit for rotary table in 4th axis of VMC machines. Its center height can be adjusted manufactured in both Vertical /Horizontal Position, with high accuracy and high loading Capacity which are suitable for heavy machining and applications. High Heavy loading capacity axial-radial Roller Bearings are incorporated toread more...

2. When requesting service, proof of purchase must be submitted of warranty card is not on file. If no card or receipt is supplied, the repair will be charged to the customer.

3. Merchandise returned for repair and found not defective will be billed for handling an inspection charges to the customers. All shipments will be sent back to the customer “freight collect.”

4. The unit must not have been previously altered, repaired or serviced by anyone other than a Yuasa Authorized Service Center. Misuse will invalidate the warranty.

5. Before any item is repaired, the customer will receive a written estimate which must be returned to Yuasa within 15 days, signed to approve/disapprove repair.

Please include your purchase order number in the field below. If you wish to submit a rotary repair request using email instead of this web page, please contact us at service@gerotech.com and include the information listed above (control serial number, index/rotary model, etc.) your PO number, and the contact information of the person authorizing the purchase order.

Rotary repair orders are processed Monday-Friday, between 8:00AM and 4:30PM Eastern Time. Orders received after 4:30PM will be processed on the next business day. If we have a question regarding the information you submit, we will contact you by phone at the number included in your request. We look forward to assisting you.