hv4 rotary table in stock

A rotary table is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed (usually horizontal or vertical) axis. Some rotary tables allow the use of index plates for indexing operations, and some can also be fitted with dividing plates that enable regular work positioning at divisions for which indexing plates are not available.

Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 100 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, throwing - see enclosed PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chuck is delivered in a paper box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.

This little beauty is from a world class factory! It features 3 3/8 inch t-slots for fastening the work to the table and is constructed of high density Meehanite casting. It is inspected by the HEIDENHAIN process and is guaranteed flat and parallel. Gear ratio is 90 to 1 and the worm is hardened and ground. The table is graduated a full 360 degrees and the micro adjust collar is graduated in steps of 1 minute. Vernier scale makes settings down to 10 seconds achievable. MT-2 center hole. We do offer tail stocks and dividing plates for these units as well. Unit is 3.11 inches high.

The Vertex Rotary Table has been designed to be used where a precision work positioning device is required. It allows the operator to mill or drill components at exact intervals around a fixed axis.

The Vertex Rotary Table is manufactured from high-density Meehanite cast iron with ground surface areas on the table and body to ensure smooth rotation