jet rotary table factory

Haas VF-2SSYT–5-axis Vertical Machining Center with30 HP motor and12,000rpm inline direct drive andhigh-speed 24 + side-mount tool changer with 4th and 5th axis rotary table

Haas VF-2SS –5-axis Vertical Machining Center with30 HP motor and12,000rpm inline direct drive andhigh-speed 24 + side-mount tool changer with 4th and 5th axis rotary table

Haas VF-4SS – 5 Axis Vertical Machining Center with 30 HP motor and 12,000rpm inline direct drive and high-speed 30+ side-mount tool changer with 4th and 5th axis rotary table

Haas VF-5SS – 5 Axis Vertical Machining Center with 30 HP motor and 12,000rpm inline direct drive and high-speed 30+ side-mount tool changer with 4th and 5th axis rotary table

... OptionsThe turntable machine R 703 is also available as an Atex version. 4-6-8-12 or 24 spindles are available as options; half of the selected spindles can be equipped with a directional rotation reverse function. The ...

The Heavy-Duty Manual Turntable maximizes workspace and minimizes wasteful motion. Bench top turntables allow workers to stay in one position and rotate items for access from all sides. ...

... impacts or forces while gear type or torque motor type rotary tables are not likely do. Its accuracy and rigidity obtained by zero-backlash technique that achieves high accurate positioning with the rotational ...

... acoustics Remote-operated Turntable HRT I is used for automated orientation-dependent acoustic measurements, allowing to rotate the device under test to specific angles in the measurement field.

The cumulative rotary table is an auxiliary device for the accumulation of packs before group packaging or other tasks. The storage disk made of stainless material, which allows the use of the table ...

This is the Hollow Rotary Table model number GSN60-05K-SV with table size 60mm gear ratio 1:5 for servo motor. GIGAGER Hollow Rotary Table also called ...

... Aerosol or Bag on Valve Stations. Our 36″ Rotary Index can accept a maximum of 6 stations, our 18″ Rotary Index can accept a maximum of 4 stations, and our 9″ Rotary Index can accept ...

... 40 inch diameter Rotary Bottle Loading Turntables are manufactured in 1/8″, 304 stainless steel. Power is provided for the TAU-4000 by a DC gear motor. Variable speed up to 150 containers per minute.

I purchased a 6" H/V rotary table with the tailstock and indexing plates from Shars last spring. The price was about the same as the one from Grizzly. It is a Chinese made unit, but works quite well in my book. The only thing I didn"t like about it was the color of the paint on it, it is red and blue. Looks kinda bright! It works well, is nice and tight, and I really have no complaints. I believe that a Phase II or Vertex might be of slightly better quality, but I cannot say for sure. The new model from Shars has three slots instead of four like mine. Three slots makes it easier to mount a chuck to the table, but four slots is not a problem, I can easily make an adapter for a chuck. Their new 6" model also uses an MT3 taper, whereas mine uses an MT2 taper, which works for me as I already have a bunch of MT2 stuff for my Clausing 8520 mill. The table by itself currently sells for $285 plus shipping, and is available with tailstock and index plates for $503 plus shipping. I cannot say that it is the best for the money, simply that I am happy with mine.

ATS Systems is a national leading machine tool accessories and automation supplier delivering reliable solutions with unwavering support that increases manufacturing productivity and throughput leading to profitable results for its customers. For over 20 years, ATS has installed over 135K machine tool accessories and automation systems allowing customers to achieve productivity gains of over 50% and increasing profitability.

A rotary table is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed (usually horizontal or vertical) axis. Some rotary tables allow the use of index plates for indexing operations, and some can also be fitted with dividing plates that enable regular work positioning at divisions for which indexing plates are not available. A rotary fixture used in this fashion is more appropriately called a dividing head (indexing head).

The table shown is a manually operated type. Powered tables under the control of CNC machines are now available, and provide a fourth axis to CNC milling machines. Rotary tables are made with a solid base, which has provision for clamping onto another table or fixture. The actual table is a precision-machined disc to which the work piece is clamped (T slots are generally provided for this purpose). This disc can rotate freely, for indexing, or under the control of a worm (handwheel), with the worm wheel portion being made part of the actual table. High precision tables are driven by backlash compensating duplex worms.

The ratio between worm and table is generally 40:1, 72:1 or 90:1 but may be any ratio that can be easily divided exactly into 360°. This is for ease of use when indexing plates are available. A graduated dial and, often, a vernier scale enable the operator to position the table, and thus the work affixed to it with great accuracy.

Rotary tables are most commonly mounted "flat", with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it "flat" on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the workpiece "between centers."

With the table mounted on a secondary table, the workpiece is accurately centered on the rotary table"s axis, which in turn is centered on the cutting tool"s axis. All three axes are thus coaxial. From this point, the secondary table can be offset in either the X or Y direction to set the cutter the desired distance from the workpiece"s center. This allows concentric machining operations on the workpiece. Placing the workpiece eccentrically a set distance from the center permits more complex curves to be cut. As with other setups on a vertical mill, the milling operation can be either drilling a series of concentric, and possibly equidistant holes, or face or end milling either circular or semicircular shapes and contours.

with the addition of a compound table on top of the rotary table, the user can move the center of rotation to anywhere on the part being cut. This enables an arc to be cut at any place on the part.

Additionally, if converted to stepper motor operation, with a CNC milling machine and a tailstock, a rotary table allows many parts to be made on a mill that otherwise would require a lathe.

Rotary tables have many applications, including being used in the manufacture and inspection process of important elements in aerospace, automation and scientific industries. The use of rotary tables stretches as far as the film and animation industry, being used to obtain accuracy and precision in filming and photography.

A rotary table used in conjunction with a mill allows a machinist to produce virtually any part they can design. Sherline’s rotary table is a precision piece of equipment that has been designed to work with their vertical milling machines, however, it can be used on any mill whenever the small 4-inch size would be an advantage. The only limits are size, not complexity.

The table is 2″ high and 4″ (100mm) in diameter. The main components have been machined from solid bar stock steel, and the complete unit weighs seven pounds. The table has been engraved with a laser, giving sharp and precise lines every 5°, numbered every 15°. These lines are calibrated with the 72-tooth worm gear that is driven by the handwheel. The handwheel is divided into 50 parts, making each line on the handwheel 1/10°. This allows a circle to be divided into 3600 increments without interpolation. Seventy-two revolutions of the handwheel rotate the table one revolution.

The rotary tables can hold more weight when they are not under a continual load. Click on the Video tab above to see examples of different weights and uses for our rotary tables.

The table T-slots are identical to those used on the Sherline mill and lathe, making the vast line of Sherline tooling available for use with this product. Two hold-down clamps and T-nuts are provided with the table. Also included is an adapter that allows Sherline’s 3- and 4-jaw chucks to be screwed directly to the rotary table. An optional right angle attachment is available (P/N 3701) to mount the table in the vertical position to further increase its versatility. With the table mounted vertically, an optional adjustable right angle tailstock (P/N 3702) can be mounted to the mill table. It is used to support and stabilize the other end of long work held in a chuck or otherwise attached to the rotary table.

A ghost view of the rotary table drawn in SolidEdge® by John Costello shows the internal mechanism so you can see how the worm gear drives the table. Ball bearings are shown in dark blue.

The rotary table has a unique table locking mechanism that is positive and does not move the table as it is locked. To maintain accuracy and frictionless movements, ball bearings are used. Worm gears are factory greased and the drives sealed to keep out chips and dirt. An oiler is easily accessible to facilitate lubrication of the table. The appearance is instrument quality with a black oxide base, precision ground finishes, and laser engraved markings.

As with all Sherline tools, the illustrated instructions are very useful. The 8-page manual covers the basics of rotary table use and takes the user through a typical project.

Any machinist desiring to take his capabilities to the ultimate levels should consider purchasing and learning to use a rotary table. The Sherline rotary table is an extremely precise and well-built piece of equipment that is sized to fit with our product line. It can also be useful on larger equipment when its compact size is called for.

The rotary table is also available with a stepper motor mount attached ready for the application of a stepper motor and CNC controls. See P/N 3700-CNC.

NOTE: Because components of the table are ground as a set during production, the P/N 3700 rotary table cannot be upgraded to the P/N 3700-CNC version later on. A new rotary table with stepper motor worm housing must be purchased.

When it comes to powered rotary table, it is the rotary tables widely used in CNC machining center which responsible for precisely locating the parts in the commanded angle in order to perform multi-face machining at one time.

For starters, we need to know what a rotary table is. Rotary table is a high precision positioning device which is widely used in machining and metalworking. With the rotation, the operators can perform drilling, milling, cutting and other applications at exact intervals around the horizontal or vertical axis. To achieve the high accuracy and efficiency, many rotary tables can incorporate with index plates or dividing plates. With the help of additional components, the rotary tables can be used for indexing application or even position the work piece at divisions on the dividing plates.

When it comes to powered rotary table, it is the rotary tables widely used in CNC machining center which responsible for precisely locating the parts in the commanded angle in order to perform multi-face machining at one time. Originally, in a 3-axis CNC machining center, there are only X, Y, Z working axes. The X, Y, Z axis are the linear lathe axes. Operating along the XYZ planes, the Z axis is the important axis that is aligned with the main axis of the machines. On the same plane, the Y axis works in horizontal direction while the X axis is the vertical operation direction.

In typical machining centers that have the 4th axis, the 4th axis is the 180° rotation axis around the X axis. With a CNC motors, the motorized rotary tables can play the role as the 4th axis in the machining centers to enhance the flexibility of metalworking applications. The arrangement of involving powered rotary table in 3-axis machining center is popular for cam machining, helical grooves producing, blade machining and other unique profile machining. Powered rotary tables have a wide range of applications, for example, utilizing in both manufacturing and inspection stage of essential components in aerospace industry, automobile manufacturing and other scientific industries.

The vital elements of a powered rotary table include a supporting disc where the work pieces are clamped for machining, a solid base for clamping onto another larger table, machine, or machining center, the CNC controller and motor. A through hole is machined into the CNC rotary table to fit the Morse taper center or fixture.

The precision-machined disc is the rotating surface where the work piece is positioned and fixed firmly. T slots are the typical parts to help clamping the work pieces. The chuck is used to hold the work piece with a dial indicator to ensure the chuck and product are centered. After installing the chuck with bolts and T-nuts then checking if the work piece is centered, the operator can position the job on the table. The disc can spin freely under the instructions from CNC controller and motor. It is also the components which the indexing plate or dividing plate can mount with. When CNC controller and the CNC motor provide inputs, the rotation of the worm gear is activated and the mating gear mounted beneath the table surface begins to spin, either. The worm gears perform the precise rotations of the rotary table and every parts of the disc are critically calibrated in degrees.

The computer numerical controller transport programmed commands to activate the powered rotary tables. The commands are conveyed in CAD files, which refers to Computer Aided Design files, and provide sequential instructions to ensure the smooth operation. Eliminating the human power, CNC provides reliable and precise high performance positioning for further machining applications.

The size and type of the CNC motors can determine the routers precision, the efficiency and also the accuracy. Following is the basic introduction of two classes of motors used in CNC rotary tables, which are the stepper motors and the servo motors. Within these 2 classes, there are more subtypes.

rotary filing—that is, running a circular cutter withfile-like teeth in the headstock of alathe.Rotary filling and later,true milling were developed to reduce time and effort

The possibilities are endless with the SB1364 6" Rotary Table as you repeatedly cut circular slots, radius corners and drill any pattern of holes. It was designed with a MT#2 Morse taper and can be mounted vertically or horizontally depending on your needs.

The handwheel scales, degree and vernier, can be easily aligned with each other and adjusted for easy viewing. The vernier scale is used to measure table rotation by ten arc seconds at a time.

When fully tightened, the table locks keep the table from rotating to reduce the strain on the gears during operation. The backlash adjustment lock secures the backlash adjustment ring in place. The backlash adjustment ring lever controls the backlash adjustment ring for adjusting the backlash between the gears.

The manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual provides full instructions on how to assemble and maintain your rotary table.