lcm rotary table in stock

The LCM ATC 240 chocolate coating machine is a serious top-tier enrobing and moulding machine with a 55kg melting tank and a 240mm enrobing belt width. Coat candies and confections, cakes, and more using full enrobing or partial enrobing, including bottom enrobing only.

The ATC 240 enrobing functions include a 240mm wide belt, variable controlled heated blower fan that is adjustable in height up to 10 cm with a food safe filter for blowing off chocolate after coating, separate motors to control speeds of the belt, blower and detailer, a coating grid belt of 1.4 meters that is easy to remove and clean with an additional inlet grid belt with a placement area of 40 cm, and a 1.6 meter run-off belt with paper roller for clipping in.

The ATC 240 machine housing is made completely of stainless steel and is portable on rolling castors that lock into place. Moulding is accomplished via the flood and scrape method and a large optional vibration table can be ordered to further increase your productivity.

A variety of options are also available and include: a rotary truffle table, a truffle grid belt, a mold (or) filling pipe, an insert for reducing the volume in the tank, a heated guard grid, decorating tray, spare belts, and more.

To learn more about the LCM chocolate coating and enrobing machines with molding capacity, made in Germany by LCM, please contact us at 512-201-4443 or email us. We will be happy to discuss your requirements.

The LCM ATC 320 chocolate coating machine is a serious top-tier enrobing and moulding machine that can coat candies and confections, cakes, and more using full or partial enrobing, including bottom enrobing only.

The ATC 320 enrobing machine with 320mm wide enrobing belt and 55kg melting tank includes a variable controlled heated blower fan (adjustable in height up to 10 cm) with food safe filter for blowing off chocolate after coating, separate motors to control speeds of the belt, blower and detailer, a coating grid belt of 1.4 meters that is easy to remove and clean with an additional inlet grid belt with a placement area of 40 cm, and a 1.6 meter run-off belt with paper roller for clipping in. Electric contact heaters ensure precise heating temperatures and the cooling system is housed in the lower section of the machine for tempering.

This ATC series of enrobing machines uses the same tempering technology that is used on industrial machines. The machine housing is made completely of stainless steel and is portable on rolling castors that lock into place. Melted chocolate can be tempered in 20 minutes. Moulding is accomplished with the flood and scrape method and a large optional vibration table can be ordered to increase your productivity.

OPTIONS for ATC enrobing and coating machines include: a rotary truffle table, a truffle grid belt, a mold, filling pipe, an insert for reducing the volume in the tank, a heated guard grid, decorating tray, spare belts, and more.

To learn more about the LCM chocolate coating and enrobing machines with molding capacity, made in Germany by LCM, please contact us at 512-201-4443 or email us. We will be happy to discuss your requirements.

The success story of our internationally successful family-owned company began when the 19-year old Ludwig Demmeler laid the foundation in 1961: In his small workshop, he worked as a subcontractor for nearby industrial businesses. Today, 60 years later, DEMMELER is an expanding and technologically strong company in the field of mechanical engineering with around 250 employees. As a hidden champion, the company in Heimertingen develops and manufactures products in the field of clamping and welding technology, rotary tables, tool changing systems based on robots and machine tool components.Innovations that have become the standard for trade and industry have always shaped our company"s successful history. Already by 1990, DEMMELER set the standards on the market as the inventor of the 3D clamping system: Originally intended for the company"s own production, the device system proved to be a quantum leap in metal processing and today is an international industrial standard due to the many possible applications and combinations.

Trading:2 CASE VERTICAL MACHIING CENTER (10KVA, SINGLE SPINDLE) VX380TD WITH FANUC 0IM CONTROLLER, DUAL TABLE AND STD.ACC. 1. 12,000RPM, 14ATC 2. SPINDLE MOTOR 7.5KW(10HP) 3. SERVO MOTOR -X AXIS 3KW(4HP) -Y AXIS 3KW(4HP) -Z AXIS 3KW(4HP) 4. Y-AXIS TRAVE 380MM(15.0") 5. SPINDLE THROUGH COOLANT(20BAR) 6. CHIP CONVEYOR ROTARY TABLE(6PT)

Recommend:The company has a total of 5 transactions related to rotary table in the last two years, the last transaction is on 2022-02-06; the transactions related to rotary table represent 0.22 of the company total transactions of the last two years.

Trading:LOADED INTO 1X 40 -HC-CON. = ARBURG ALLROUNDER INJECTION MOULDING MACHINE TYPE 270 S 350-170 MACHINE NO.: 235564 . ROTARY TABLE 1200 T MACHINE NO.: 235563 . COMPLETE WITH ACCESSORIES . SPARE PARTS FOR INJECTION MOULDING MACHINE . HS-CODES: 84771000

Trading:ROTARY TABLE MOULD SHELF QUENCH LIFTING SUPPO RT ===PANASONIC LOGISTICS SOLUTIONS OF AMERIC A INC 2475A PASEO DE LAS AMERICAS 1063SAN DIEGO CA CONTACT CINTHYA GARCIA PHONE 61 96616995 EXTENSION 111 EMAIL OPERATIONSLB =HJMINTLCOM

Trading:1289 PKG [3 W/CASES + 334 CTNS + 952 CTNS (27 PLTS)] PREMIUM WALKER, POLYMER LOW TOP, PREMIUM WALKER, POLYMER HIGH TOP, PNEUMATIC WALKER, POLYMER LOW TOP PNEUMATIC WALKER, POLYMER HIGH TOP AMS NO UTLC SEA14030014 SCREWS NUTS STICKER, POLYBAG AND CARTON. SCREWS CASTERS - P.O. STK8000-121 PO 332953 SPUN POLY BLANKET AMS NO NMCO PPDEN1403111 CNC ROTARY TABLE SPARE PARTS FOR CONVERTING SH160 GOOSENECK SH200 GOOSENECK SH160 MELTING POT SH200 SHOT TUBE SPRAY NOZZLE SPEED ADJUST METER SH160 GOOSENECK SH200 GOOSENECK SH160 NOZZLE HEATER SH200 NOZZLE HEATER SH160 PLUNGER RINGS SH200 PLUNGER RINGS STUDS,NUTS, SCREWS N/A SO.8761,8768,8770,8772,8775,8733, 8747,8748,8753,8760,8780 IRI/L 27/02/2014

Trading:ROTARY TABLE = 2 SKIDS KM 38051612/6,8 TO BE: 1 PC. RIMSTAR COMPACT 29/16 INCL. ROTARY TABLE FOR "LETS GEL PROJECT" ACCORDING TO OUR QUOTATION NO. 301678/02/04 DD.12/12/2011 1ST PARTIAL SHIPMENT HERE: RIMSTAR COMPACT 29/16 WITH 2 COLOUR DOS;RIM STAR 2 SKIDS KM 38051612/4,5 RIM STAR;RIM STAR = 2 SKIDS KM 38051612/9,10 RIM STAR;RIM STAR = 2 SKIDS KM 38051612/3,7 RIM STAR;RIM STAR = 2 SKIDS KM 38051612/1,2 RIM STAR

Trading:"SHIPPER"S LOAD, COUNT & WEIGHT" 1 CONTAINER CONTAIN 2327 PKGS OF ANTI-FREEZE/COOLANT TESTER,BODY, ORIFICE, HOUSING PLATED & FILTER RETAINER, CABLE TV EQUIPMENT,BELTS,BARREL,ROTARY TABLE, VALVE PARTS,MACHINE PARTS FOR MANUFACTURE OF FOODS,FORGED SHELL NOZZLE,BRAK PARTS OF MOTOR,WORM PINON,SHAFT,NUTS, FITTINGS,COVERING FOLLOWING BUYER"S, TENSION TOOL,ORDER NO.WH293595 VG-270 CENTER PUNCH TOOL,VG-900 STRAP TOOL VG-900A ADAPTER TOOL,SP-104 DIXON HOSE CUTTER SPARE PARTS FOR TOOL,FI204 PUNCH HOLDER +++ +++ FI202 PUNCH,J85785 BLADE CUTTER, BASE, AXIOM RIGHT HAND SCAN MODULE 10390 COLLAR, BAT MK15/MK20 10510 COUPLING 10533 PINION RESTRAINT 11068 HOUSING, CAST,MK400, LOCK TUBE 11343 DOUBLE LIP GASKET, MK400 11397 COVER DIE-CAST 11438 TUBE, MACHINED 11439 HOUSING, MACHINED 11059 TUBE, CAST, MK400, LOCKING 11439 HOUSING, MACHINED 11599 SPRITE HOUSING, MACHINED 11601 SPRITE COVER, MACHINED

Trading:181 PACKAGE TSUDAKOMA NC ROTARY TABLE 1 LOT SPARE PARTS FOR TOYOTA TEXTILE MACHINERY ROLAND ELECTRONIC MUSICAL INSTRUMENTS AUTOMOBILE CABLE 9 PALLETS OF V BELTS EL21 , HANGERS AND SUPPORTS DAP SERGIPE, BRAZIL 41 WOODEN CASES OF KPF RINGS FOR BEARING IQ BA

Trading:3 PCS CONSISTING OF STORING STATION RTVB11 20ST ROTARY TABLE VERTICAL DTV38 20 PART 1 INCL 001120 00362562 210060931INCL 001125 00171841 383060933 INCL 001141 P011807 801096929 STORING STATION RTVB32 20STP STORING STATION RTVN11 20STSTORING STYTION RTVB11 20ST

Recommend:The company has a total of 2 transactions related to horizontal rotary table in the last two years, the last transaction is on 2021-02-16; the transactions related to horizontal rotary table represent 0.09 of the company total transactions of the last two years.

Recommend:The company has a total of 3 transactions related to rotary table in the last two years, the last transaction is on 2021-09-07; the transactions related to rotary table represent 0.48 of the company total transactions of the last two years.

Recommend:The company has a total of 1 transactions related to rotary table in the last two years, the last transaction is on 2021-08-23; the transactions related to rotary table represent 0.02 of the company total transactions of the last two years.

Trading:CNC CONTROLLED, CHUCK TYPE GRINDING MACHINE 1 SET OF KOYO MODEL VG-100, MITSUBISHI MOTION, CNC CONTROLLED, CHUCK TYPE GRINDING MACHINE WITH STANDARD ACCESSORIES AND SPECIAL EQUIPMENT 1 SET OF KOYO MODEL R632 6 AXES CNC CONTROLLED, TWO-SPINDLE, ROTARY TABLE-TYPE, SURFACE GRINDING MACHINE WITH STANDARD ACCESSORIES AND SPECIAL EQUIPMENT "SHIPPERS DESIRE TO STATE THAT" COUNTRY OF ORIGIN: JAPAN