mazak 4th axis rotary table factory

The Mazak VCN-510C is an exclusive part of our Vertical Machining Centers inventory which we own and service. We"re the international CNC specialists with the best guarantee in the industry.

For unmatched high-precision small parts production, the simple but innovative HC-5000 machining center delivers durability, reliability and long-term accuracy with an unbeatable price-performance ratio.

1MTA offers a large range of 4th axis rotary tables supplied by Kitagawa, specialists in high-quality machining equipment. 4 axis CNC rotary tables add an additional, rotary axis to your indexing table allowing for greater precision and versatility.

The VERTICAL TRAVELING COLUMN (VTC) 200C Vertical Machining Center features a powerful 40 Taper spindle, full traveling column design and fixed table for machining of extremely long and heavy workpieces. Or with a table center partition the machine work envelop can be transformed into two separate work areas that allow the machine to be in cycle in one work area, while a part is being set up in the other work area. The machine also delivers fast rapid traverse rates to reduce non-cut times.

Mazak SmoothG CNC Control, 4th Axis Programmable with Mazak MR-250RAM01 Rotary Table with 250mm Faceplate and Tailstock, Renishaw Wireless RTS Tool Probe and OMP 600 Parts Probe System, Grundfos 213 PSI Through Spindle Coolant, 48 Station Expanded Tool Changer, Remote Jog Handle with LCD Screen, Synchronized Tapping, Cylindrical Interpolation, Ethernet Port, 8MB Expanded Program Storage, Tool Life Management and Breakage Detection, Jorgensen Chip Conveyor, Coolant System with Tank and Pumps, Full Top Enclosure Option, Machine Manuals. Mazak Dealer Demo sold in August 2020. Note: Vises, Tool Holders, Chick Fixture plate, Mist Collector - NOT INCLUDED WITH QUOTED PRICE.

Made in Kentucky, the VC-500A/5X Vertical Machining Center has a trunnion-style rotary/tilt table that allows for the accurate, cost-effective processing of small complex parts via full 5-axis machining. The machine also features the MAZATROL SmoothX CNC that allows for easier programming and faster part cycle times, in either EIA or MAZATROL conversational.

Axis travels for the VC-500A/5X measure 19.88" in X, 19.88" in Y and 20.07" in Z, allowing it to accommodate a part sizes up to 19.68" in diameter and 12" high. Rapid traverse speeds for these three linear axes are now 1,181 ipm.

To minimize thermal displacement, Mazak incorporates an oil chiller that cools the VC-500A/5X’s head and table. The machine’s trunnion-style rotary/tilt table is constructed with durable high-speed roller gear cam drive technology for high torsional rigidity and positioning accuracy. The table tilts +110 degrees / -110 degrees in the B axis and rotates 360 degrees in the C axis and can accommodate workpiece weights up to 440 lbs.

Mazak’s MAZATROL SmoothX CNC on the VC-500A/5X makes it easy to generate programs for highly complex parts production. It has several advanced functions that allow it to ensure the shortest possible machining cycle times, especially in fine increment programs for simultaneous 5-axis operations and free-form die-mold machining. These functions include High Gain Feed Forward Control, Fast Rotary Axis Speeds, Variable Acceleration Control and Intelligent Pocket Milling.

CNC ROTARY TABLE CARBIDE WORM SYSTEM ■ WORM WHEEL Worldwide Field-proven, NIKKEN CNC Rotary Table NIKKEN Carbide Worm Screw System Ion Nitrided Worm Wheel HV980 NIKKEN produce all worm wheels in their CNC Rotary Tables from custom specified steel. During the production process the material is further hardened and ion-nitrided, giving unbeatable performance in service due to exceptional friction-resistance. The tooth surface and core material hardness is shown below. Depth 0.1mm HV 980 Phosphor Bronze Worm Wheel Inside HRC 36 Hardness of Worm Wheel Backlash Compensation Carbide Worm Screw ■...

VCS-430A CNC ROTARY TABLE OPTIONS CNC202MA CNC202MA Specifications • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole

• Diameter of Table 0mm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • Tilting Travel Angle

VCS-530C CNC ROTARY TABLE OPTIONS CNC202MA • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole 530

CNC260LMA Specifications • Diameter of Table 0mm : 0260 • Max Work Load (kg) : 350(H) 175(V) • Rotation Speed : 16.6(min"), 33.3(min") • Indexing Accuracy (sec) : 20 • Clamping Torque (Nm) : 588 • Net Weight (kg) : 120 • Diameter of Spindle Hole : 08OH7 ■ Diameter of Table 0mm ■ Max Work Load (kg) ■ Rotation Speed ■ Indexing Accuracy (sec) ■ Clamping Torque (Nm) ■ Net Weight (kg) ■ Motor Type ■ Diameter of Spindle Hole

• Diameter of Table 0mm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • Tilting Travel Angle • Diameter of Table 0mm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • Tilting Travel Angle

CNC ROTARY TABLE OPTIONS VTC-200C-II & VTC-530C 255 ST (265 ST) • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • CNC Rotary Tables for VTC-200C-II and VTC-530C are dimensionally identical but not interchangeable due to differences in electrical specification. • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • CNC Rotary Tables for VTC-200C-II and...

CNC ROTARY TABLE OPTIONS VTC-300C-II & VTC-760C 380 ST • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • CNC Rotary Tables for VTC-300C-II and VTC-760C are dimensionally identical but not interchangeable due to differences in electrical specification. • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • CNC Rotary Tables for VTC-300C-II and VTC-760C are...

CNC ROTARY TABLE OPTIONS VTC-300C-II & VTC-760C 380 ST • CNC Rotary Tables for VTC-300C-II and VTC-760C are dimensionally identical but not interchangeable due to differences in electrical specification. • Diameter of Table Ømm : Ø200 • Max Work Load (kg) : 60(0 to 30°) 40(30° to 90°) • Rotation Speed : 22.2 min-1 (Rotary) : 16.6 min-1 (Tilting) • Indexing Accuracy (sec) : 20 (Rotary), 60 (Tilting) • Clamping Torque (Nm) : 588 (Rotary), 612 (Tilting) Clamping System 3.5MPa • Net Weight (kg) : 160 • Motor Type : HF-H105T-A48 (Rotary) : HF-H105T-A48 (Tilting) • Diameter of Spindle Hole :...

VTC-800/30SR ROTARY TABLE OPTIONS CNC401MA • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole

VTC-800/30SR ROTARY TABLE OPTIONS 800 410 • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole • Diameter of Table Ømm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole

CNCB450MA Specifications 1 Diameter of Table 0mm 1Max Work Load (kg) 1Rotation Speed 1 Indexing Accuracy (sec) 1Clamping Torque (Nm) 1 Net Weight (kg) 1Motor Type 1 Diameter of Spindle Hole CNCB630MA 800 CNCB630MA Specifications • Diameter of Table 0mm • Max Work Load (kg) • Rotation Speed • Indexing Accuracy (sec) • Clamping Torque (Nm) • Net Weight (kg) • Motor Type • Diameter of Spindle Hole

At Hosea Precision, quality comes first - at every stage of the production process. We are dedicated to producing 5 axis and 4 axis rotary tables, which are two of our proudest products. With the high-quality and precision feature, our CNC rotary tables have been sold & widely used in the European market and have an enormously high reputation amongst our customers.

In March 2015 Hosea Precision created the independent brand, to make it a household name for high-quality 4 axis rotary tables from Taiwan. We have been following this strategy with great success: more and more manufacturers across Europe cooperate with us and make use of our 5 axis rotary tables and other rotary tables products. Do not hesitate to contact Hosea for more products detail!

Please tell me someone can help me resolve this issue. I’ll do my best to convey where I am in the process with the information that I possess; as I purchased it used and did not get the rotary table nor much of the manuals with it; I got it CHEAP (and luckily, it is super nice). I’ll start with the basics.

Well, after a quick inspection of the basics; it was indeed configured for use with a rotary (A) axis. A quick peek in the cabinet revealed an MDS-B-V1-05 Mitsubishi drive, labeled “A Axis.” Moving on to the machining envelope, sure enough, there are a pair of communication ports and a hydraulic quick disconnect (for the brake, I surmise). Both communication ports had their protective caps securely affixed, as well as a protective cover over the hydraulic quick disconnect; appears to have been in place since the machine was built. So, this leads me to believe that “all I need now” (LOL), would be an appropriately sized rotary table, with compatible servo motor, communications cables, and proper hydraulic line (again, for braking I suppose). It would stand to reason that I’ll have to actually “turn the option on” via parameters; which I wouldn’t imagine being too difficult to obtain from Mazak.....maybe?

It’s just such a shame having this little mill, in such AMAZING running condition. Previous owner must have had one Hell of PM department as the spindle looks and sounds like brand new, all the way up to the 12,000rpm max, the X,Y, and Z axis move as silently as a new machine would (at 100% rapid traverse), has a chip conveyor, and not a single Knick mark on the table, and even the slide way covers are perfect. It would be SO nice to have an actual full 4th on it as well.

Our rotary table has a custom mount, 3.25" chuck with machinable and replaceable jaws. The custom made low inductance 280oz stepper motor is also included.