tsudakoma rotary table oil price

Tsudakoma had been providing best-in-class rotary tables for over 100 years, offering multiple models and configurations to ensure seamless integration with your machining centers. Koma Precision has been distributing Tsudakoma’s tables for over 40 of those years and our North American sales team and in-house engineers will work with you to determine which model best suits your machining needs.

KOMA Precision Inc. introduces a new improved line of extra-large center bore, dual disc hydraulic clamping rotary tables from Tsudakoma. Like all Tsudakoma rotary tables, RCB Series has the proprietary dual lead worm gear system with ultra-precision cross roller bearings. The Tsudakoma dual lead gearing system delivers the optimal balance between power, durability and smooth cutting performance.

Three new models are available, with table diameter of RCB-350, R being 8.45", RCB-450, R with 10.4" and RCB-550, R with 12.4". The RCB Series rotary tables can be mounted either vertically or horizontally. Various options such as chucks, tailstocks, support spindles, and faceplates are available. Pneumatic and Hydraulic rotary joints for automatic load and unload of the work piece are also available.

"Koma Precision Inc. and Tsudakoma share a commitment to providing quality products that maximize the performance of machine centers," states Frank Cerrito, General Manager for KOMA Precision. "The features offered on the RCB Series are ideal for large-diameter work piece manufacturing that is mainly seen in the oil/energy industry."

With over 37 years of experience we are the exclusive importer, national distributor and service center for Tsudakoma rotary tables, Alberti angle heads & live tools, Romai angle heads, tool presetters and swiss tools.

The latest TN tilting range from Tsudakoma, with major developments over earlier models with major increases in speed and power transmission, with high power pneumatic clamping system. The unit has a 55mm spindle nose location with a generous location depth of 15mm with 35mm directly through the table and a has a centre height of 150mm in the vertical position (90 degrees) and 210mm in the horizontal position (0 degrees) without faceplate, 235mm with faceplate. This device is around 524mm in overall width which would ideally suit a wide range of machine tool bed widths and an overall height of 235mm. The unit has a tilting range as standard of -17 to + 107 degrees. An excellent carrying capacity of 20kg through the whole tilting range and 35kg horizontally or between centres and speeds of up to 41. 6rpm in the rotary axis and 16. 6rpm in tilt dependent on motor selection. Net weight of this device is 80kg. The Tsudakoma TN-131 CNC rotary tilting table without motors, can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface” (motor, switch, cable and connector requirements if you already have a “4th / 5th ;axis interface” in the machine) and machine interface costs (if you do not have the additional axes fitted). Rotary axis motor is mounted to the right hand side on this device and may restrict the Y axis capability in certain circumstances, the tilt axis motor is mounted in a rear facing direction on the far side of the device and should not have any bearing on traverses. This range of Tsudakoma devices now come with dual lead full depth worm and wheel, which means that there is less load on individual teeth improving wear and torque performance over and above the conventional standard gear. Tsudakoma is one of the oldest and original manufacturers from Japan and in our experience build a very fine device with a very long service life, probably greater than those we have experienced from other Japanese makers. Tsudakoma products carry a standard one year parts and labour warranty and have a full working partnership with CNCROTARY. COM. This device may take from 2 to 3 weeks to configure as required.

Lyndex Nikken – Hydraulic Chucks & Toolholders, 3 Jaw Chucks and Angle Heads, Rotary Tables, Live Tools for Turning Cneters, Shrink Fit Machines & Holders, Precision Collets

Notes: 1. The table above shows the maximum rotation speeds when the MP scale is attached. The rotation speed of the rotary table is determined by the

2. Motors described above are selected for the equivalent motor torque capacity. The motor which is actually used on your rotary table is determined by

Notes: 1. Indexing accuracy above is for the table with MP scale. 2. For RB-K models, No. 3 does not apply. 3. The figure in ( ) *1 above shows an indexing accuracy with scale for the RB-250 and RB-250K.

4. The figure in ( ) * 2 above shows an indexing accuracy for the RB-500 and RB-500K. 5. For RB and RB-K rotary tables with a 1/60 gear ratio or less, indexing accuracy is ±10 arc sec.

The Third-Party Rotary provision provides access to the rotary parameters in the Haas control, allowing you to use a third-party single- or two-axis rotary table on your Haas machine. The option supports full simultaneous machining up to 5 axes, and is compatible with Dynamic Work Offsets and Tool Center Point Control. It is the responsibility of the customer and the third-party manufacturer to troubleshoot and fine tune the different parameters. Requires the purchase of the 4th-Axis Drive option to operate a single-axis rotary, or the purchase of both 4th- and 5th-Axis Drive options to operate a two-axis rotary.

Koma Precision, Inc. introduces a new line of high performance, 4th axis rotary tables from Tsudakoma, a manufacturer of precision rotary tables. "The RNE Series 4th axis rotary tables are compact, high-performance tables offered at economy line pricing," said a Koma spokesperson.

Four new models are available, ranging from the RNE-160 with 6.3" (160 mm) face-plate capacity to the RNE-320 with 12.6" (320 mm) face-plate capacity. The RNE Series tables" feature speeds ranging from 25 to 44.4 RPM and indexing accuracies ranging from 10 to 12.5 arc seconds. Various options such as chucks, tailstocks, support spindles and faceplates are available. Pneumatic and hydraulic rotary joints for automatic load and unload of the work piece are also available.

"The RNE Series feature heavy-duty construction combining Tsudakoma casting material with Tsudakoma"s dual lead worm gearing system featuring the largest tooth engagement of any rotary table manufacturer. This proprietary gearing system generates up to 85% torque transfer efficiency. These tables also feature Tsudakoma"s ultra precision cross roller bearings that support radial, axial and movement loads four times the level of stiffness as angular contact bearings," said the spokesperson.

"Koma Precision, Inc. and Tsudakoma share a commitment to providing quality products that maximize the performance of machine centers," said Hiro Ichikawa, OEM Sales Manager for Koma Precision, Inc. "The features offered on the RNE Series are ideal for those looking for economical ways to improve the flexibility and productivity of their operation without compromising rigidity and accuracy."