natural gas safety valve manufacturer

ISO 9001:2015 certified. Manufacturer of standard and custom natural ga valves. High pressure ball valves are available. Features include 316 stainless steel, alloy 400 and UNS N10276 body constructions, blow-out proof ball and bottom-loaded stem, trunnion-style ball design, low actuation-torque and 2-way and 3-way flow patterns. High pressure ball valves have working pressures up to 6,000 psi, temperature range from -40 degrees F to 450 degrees F and flow (Cv) up to 1.6. Made in the USA.

Manufacturer of compressed, shut-off, vent, control, high performance butterfly, cryogenic, internal, pressure regulator and cable natural gas valves. Made from stainless steel, carbon steel, aluminum and brass. Features vary depending upon model, including explosion proof enclosures, PEEK pistons, watertight coils, solenoid operators, closing springs, visual indications, pipe plugs, fabricated extension bonnets, PTFE wear pads and seat design. Suitable for commercial and industrial applications.

Manufacturer of cryogenic check valves for defense, storage and transportation applications. Made from stainless steel and bronze. Available in 725 psi operating pressure and -196 to +65 degrees C operating temperature. Suitable for various liquids and gases including oxygen, nitrogen, argon, carbon dioxide, neon, hydrogen, nitrous oxide, sulfur hexafluoride, natural gas, ethylene and trifluoromethane.

Manufacturer & custom manufacturer of emergency valves including fuel tank valves, natural gas valves, & gas valves. Pipe size ranges from 1/2 in. to 3 in. Pressure ranges from 150 psi to 300 psi . Maximum fluid temperature is 400 degrees F. Available in bronze & stainless steel. Suitable to control the flow of steam, corrosive fluids, deionized water, condensate, ammonia, vegetable oils, fuel oils, cryogenics, & flammable liquids.

Manufacturer of check valves suitable for horizontal and vertical installations in liquid, gas, and steam applications. Features include 2 to 42 in. line size, ASME class 150 to 2500, RF and RTJ flanged ends, stainless steel trim, as well as center and dual guided stem. Materials include carbon steel, alloys, and stainless steel. Industries served include building, chemical, gas, mining, petroleum, power, pulp and paper, textiles, municipal, and water treatment. Meets ANSI standards.

Manufacturer of standard and custom ball and transfer valves for natural gas pipeline transmission, power generation, midstream gas, refinery, compressor lube, seal oil system, duplex filters, shell and tube heat exchangers. Made from steel, 316/316L stainless steel and carbon steel materials. Available in 1 to 10 in. sizes and standard, split or straight-thru versions. Features include multi-ports, rugged, precision machined, spring-loaded pads and shaft designs with large cross-sections of O-ring seals. Serves the oil, gas, mining and marine industries.

ISO 9001:2015 certified. manufacturer and designer of spring loaded silent check valves for industrial and natural gases. Types of valves include flange, lined pipe, sanitary, union, straight sided and glass pipe insert, sanitary cartridge, low and high pressure, socket weld, connector, bushing, horizontal, vertical flanged, miniature and tubing valves. Materials include carbon and stainless steel, high and non-ferrous alloys and titanium and nickel alloys. Suitable for chemical, petrochemical, pharmaceutical, food and dairy and OEM applications. Meets NACE standards. CE certified. Made in the USA.

Distributor of natural gas valves. Check valves, solenoid valves, ball valves, cryogenic valves, relief valves, needle valves, plug valves, actuated valves, diaphragm valves, pressure regulators, cylinder regulators, back pressure regulators, control valves, & tube fittings. Markets served include industrial gas, chemical, medical, power, marine, oil & gas processing.

Distributor of combustion, refrigeration, and compressed natural gas (CNG) solenoid valves. Available in various model series. Suitable for controlling a range of liquids and gases. Same-day, FOB, and drop shipping are provided depending on orders.

ABCO, Anver, Atkomatic, Bee, Circle Seal, Coilhose, Conrader, DK-Lok, Dixon, Duravalve, Dwyer, Dyla-Trol, DynaQuip, Eaton, FMC, Flairline, Flowserve, Go, Goyen Mecair, HiP, Hoke, Jefferson, Kingston, Nachi, SMC, Smith-Cooper, WaterCop

Manufacturer of manual ball and check CNG valves made from stainless steel. Available in 19 mm orifice sizes, operating pressure up to 6,000 psi and operating temperature up to 375 degrees F. Features include low operating torque, end connectors, mounting panels, flow direction indicators, handles, stems, two way and three-way design. Serves the aerospace, oil/gas, CNG, marine, mining, chemical, power generation, biotechnology, geothermal, shipbuilding, pulp/paper and other industries. Stock items available.

Stocking distributor of natural gas ball valves. Available in bronze material and 1/4" to 3" sizes with adjustable packing gland feature. Butterfly, gate, globe, safety relief, and check valves are also supplied. Also suitable for LP gas, flammable liquid, and heated oil applications. Markets served include OEM, MRO, pipe-valve supply house, and process industries. UL listed.

ABZ, ASCO, Air-Mite, Apollo, Aquatrol, Bachman, Bonomi, Check-All, Davis, Delta, Fabrotech, Flomatic, Fulflo, Generant, Holyoke, Janatics, Keckley, Lube Devices, Magnatrol, Midwest Control, Ohio Valve, Spartan

Manufacturer of standard & custom control valves for natural gas applications. Types of control valves include pressure control valves, flow control valves, ultra high-resolution pressure control valves, precision back pressure control valves & precision vacuum control valves. Pressure control valves such as electronic air pressure control valves, electro-pneumatic pressure control valves, closed loop pressure control valves, high-flow electro-pneumatic pressure control valves, high-resolution pressure control valves, intrinsically-safe pressure control valves & OEM pressure control valves are available. Made in the USA.

Custom manufacturer of natural gas check valves. Specifications include 5,000 psi maximum pressure, 50 psi to 150 psi pilot pressure, 15 ft. lbs. torque, minus 45 degrees F to plus 200 degrees F fluid temperature, 0.85 specific gravity & 150 SUS viscosity at 100 degrees F temperature. Features include stainless steel springs, seats & push rods, Buna-N® O-rings, filter retainers, piston guide rings, aluminum bonnets & cartridge mounting threads.

ISO 9001:2015 certified custom manufacturer of manifold valves. Types of valves include ball, bellows and diaphragm sealed, manifold, purge, bleed, check, metering, needle, shut-off, gas, regulating, relief and quarter-turn plug valves. Materials for valves include brass, carbon and stainless steel and alloys. Serves the chemical, oil and gas, power, semiconductor and transportation industries. ASME approved and METI/KHK, UNSPSC, eClass and TUV certified.

Distributor of valves for industrial and commercial applications. Types include oil and gas shut-off, ball, modulator, control, solenoid and modulator valves. Equipment upgrade and repairs, burner tuning, preventative maintenance, installation, commissioning, troubleshooting, equipment start-up, calibration, NFPA safety audits and consulting services provided. 24/7 emergency services are available.

Stocking distributor of valves available in forged steel, cast steel, chrome molly, Monel®, Hastelloy® B & C, cast iron, ductile iron, bronze, brass & PVC. Electric, hydraulic & pneumatic actuations. Modifications include flange ups, conversions, coatings, hydro testing, packing changes & trim changes.

Custom manufacturer of ring damped, sealing compressor, concentric disc and plate valves. Various features include disc or milled seat design, spring pockets, interchangeable discs, heavy duty springs and threaded washers.

Custom manufacturer of wafer style butterfly valves for natural gas & oil burners. Valves are available in various models & configurations. Specifications of valves include 2 in. to 12 in. sizes, 60 psig to 80 psig minimum actuator air supply, minus 4 degrees F to plus 175 degrees F temperature range & 12.1 lbs. to 128.5 lbs. weight. Features of valves include ductile iron body, stainless steel discs & stems, mounting pads, visual position indicators & pneumatic actuators.

Master distributor of a wide variety of electronic, pneumatic & self-actuated valves, controls, controllers, regulators, gauges, meters, sensors for process, commercial and HVAC applications controlling temperature, flow, pressure and more.

Apollo, Aquatrol, Armstrong, Bonomi, CLA-VAL, Cash Acme, Cash Valve, Colonial, Conbraco, Consolidated, Dwyer, Gould, Granzow, Hammond, Homestead, Honeywell, Keckley, Kerotest, Kingston, Kunkle, Lance, Landis & Gyr, Leonard, Leslie, MCC Powers, Marsh Bellofram, Marsh Steam, Masoneilan, Milwaukee,...

Manufacturer of 1/8 in. NPT male outlet brass valves. Products include pilot, compression fit and burner valves. Burner valves with adjustable slip fit orifice or brass handles are also offered. Serves the OEMs (Original Equipment Manufacturers) and plumbing dealers, distributors, foodservice operators and metal fabrication industries.

Manufacturer of standard and custom valves for carbon dioxide and natural gas applications. Types of valves include check valves, shut-off valves, gas demand flow valves, header valves, residual pressure valves, line station valves and master shut-off valves. Made from different materials including steel, stainless steel, aluminum, brass, bronze and plastic materials. Available in different thread sizes and working pressures up to 6000 psi. Capabilities include design engineering, CNC machining, sawing, deburring, polishing, honing, grinding, welding and cleaning. Valves are REACH and RoHS compliant and meet CGA specifications.

Manufacturer of standard and custom natural gas valves. Various types include needle, gauge, ball, check, relief, hand, bleed, metering and toggle valves. RoHS and REACH compliant. Meets ASME and ASTM standards. CSA approved.

Stocking distributor of industrial valves for use in natural gas cylinders & compressors. Types include three-way, one, two & three-piece & miniature ball, swing & wafer check, butterfly & knife gate valves.

Distributor of replacement nuclear power, high pressure, cryogenic, cylinder and natural gas valves. Relief, diaphragm, low pressure, services, refrigeration, ball, emergency shut-off, excess flow control, isolation, in-line, gate, bonnet and seal valves are available. Back pressure, bypass, inlet, solenoid, swing check, angle, globe, flange, pilot, control, hose, toggle, needle, double, check, tank, filler, transfer, vapor and fuel valves are offered. ASME compliant valves are also available. Technical services, warehousing, shipping and installation are available.

If you have been searching for a safety release valve that you can use to reduce short-term pressure surges successfully and diminish the effects of gas leaks, this is the product for ...

... regulators have safety valves which will slam shut in the event of emergencies, such as the gas reaching too high a pressure level. The valve works to protect any fittings ...

This product has hydraulically actuated class A gas safety valves to EN 161 used for automatic shut-off. It shuts off when unstimulated for gas and air, ...

The S 104 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses ...

The S50 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses ...

The S100 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses ...

... Pressure Safety Valve + Rupture Disk is protected and may be utilized autonomously as essential security gadgets or in conjunction. There are 3 possible combinations. The first combinations ...

It"s a Safety valve in according with Directives ATEX 20K/34/EU. Technical Norm Fire Prevention 41/256 31/10/2019. d.P.R. 10/520 19/03/1955 and subsequent amendments.

130 Series Safety valves are also available as Relief valves. Relief valves, identified by the letter R after the type number, are devices with an operational function, ...

V651 Series safety relief valves are produced as safety and relief type. Safety valves are pressure relief elements used to evacuate excessive pressure ...

PVS type slam shut valves are pilot-operated relief valves in which the opening and the closing of the main plug is controlled by a pilot device which is very ...

This range of spring loaded conventional and balanced safety relief valves is specifically designed for overpressure protection of unfired pressure vessel (ASME Section VIII application). ...

The EMERSON BM7 SERIES is a disk slam-shut valve characterized as automatic isolating elements, which are suitable for installation as safety devices in regulating stations. This device has a high operation ...

... control and regulate the gas, air flow to burners and other combustion devices. HMV is a unique safety valve that can be supplied for the requiremen of handling higher ...

Type 50 is a safety valve for universal use. It can be used for nearly any industrial application, e.g. in shipping and pipeline construction, the chemical and petrochemical industries, ...

The RIEGER Safety valve Type SH prevents excessive pressure in steam and gaseous media in plant components and tanks. The set pressure is generally higher than the operating pressure of the system.

... sewage, gas, glycol, diathermic oil, industrial water, steam and other natural and aggressive media, depending on theresistance of materials usedfor the construction ofthe valve.

Industry leading pressure and safety relief valve designs with over 140 years of technical and application expertise providing custom engineered solutions for O&G, Refining, Chemical, Petrochemical, Process and Power applications. Our designs meet global and local codes and standards (API 526; ASME Section I, IV & VIII; EN ISO 4126; PED & more). Gain insight into the performance of your pressure relief valves with wireless monitoring.

Our Safety Relief valves offer an economical installation for large capacity relief applications. And that’s exactly the solution you need when other devices in the system don’t relieve dangerous overpressure in the transmission, distribution and use of gas. Leaking bypass valves can sometimes permit pressure to build during off-peak hours. Pressure regulators with damaged valves or seats are not able to effectively shut off when required, possibly leading to dangerous conditions.

Our mechanical safety relief valves are an economical solution with large relieving capacity. The Model 257-S features a “roll-out” diaphragm with a double-ported single valve in which diaphragm action is constantly matched with spring action. This design offers large capacity, tight seating and reseating, sturdy construction and easy servicing with no adjustments needed.

WITT is a manufacturer of Pressure relief valvesor Safety relief valves for technical gases. They are designed to protect against overpressure by discharging pressurized gases and vapors from pipelines, pressure vessels and plant components. Safety relief valves (SRV) are often the last line of defense against explosion – and such an explosion could be fatal. Other common names for safety relief valves are pressure relief valve (PRV), safety valve, pressure safety valve, overpressure valve, relief valve or blow-off valve.

WITT safety valves are very precise. They are individually preset to open at a predetermined pressure within the range 0.07 to 652 Psi. Their small size and orientation-independent installation allow a wide range of connection options. WITT relief valves also stand out due to their high blow-off flow rates of up to 970m³/h. They can be used within a temperature range of -76° F to +518°F and even with very low pressures.

For maximum safety, WITT undertakes 100 % testing of each safety relief valve before it is delivered. In addition, WITT offers individual testing of eachsafety valveby the TÜV, with their certificate as proof of the correct set pressure.

WITTsafety relief valvesare direct-acting, spring-loaded valves. When the preset opening pressure is reached, a spring-loaded element in the valve gives way and opens, and the pressure is relieved. Once the pressures are equalized, the valve closes automatically and can be reactivated any time the pressure rises again. Depending on the application and the nature of the gas, the safety relief valvescan either discharge to atmosphere, or via a connected blow-off line. The opening pressure of the safety valves is preset by WITT at the factory according to the customer’s requirements.

Safety relief valvesare used in numerous industries and industrial applications where, for example, gases pass through pipelines or where special process vessels have to be filled with gas at a certain pressure.

For most industrial applications using technical gases, brass is usually the standard material of construction of thesafety relief valvebody/housing. For the use of pressure relief valves with aggressive and corrosive gases, the housings are made of high-quality stainless steel (1.4541/AISI 321, 1.4404/AISI 316L, 1.4305/AISI 303 or 1.4571/AISI 316Ti). The use of aluminium as a housing material is also possible.

Depending on the type of gas used and individual customer requirements, various sealing materials and elastomers are available to ensure the safety of your systems under even the most difficult conditions.

WITT pressure relief valves are available with different connections. In addition to the standard versions with the usual internal or external threads, special versions with KF or CF flanges, VCR or UNF threads can also be ordered. Special adapters for connecting the safety relief valve to a blow-off line are also available.

Flow Safe is a manufacturer of spring-operated and pilot-operated high-performance pressure relief devices. The Flow Safe product line is specifically designed for applications in Natural Gas Distribution, Pipeline, Aerospace, Marine, Industrial Gasses and other liquid and gas process applications.

Controlling and managing the flow of natural gas, air, propane or LP is critical for safety and to ensure full compliance with all regulations. At EGW Utility Solutions, we offer a wide ranging selection of residential and commercial natural gas regulators.

EGW features Itron and BelGas natural gas pressure regulators. Both companies are recognized for their high performance, safety and versatility in a wide range of applications. We carry general use natural gas regulators for residential, commercial and light industrial types of applications.

Our more advanced natural gas regulator options are designed for specialized use and can be modified or customized for different applications with your choice of a variety of pilot regulators. They can be used in gas separators and as distribution relief devices, offering high flow capacity and the ability to customize the set pressure for the application.

All of the natural gas regulators we offer are compact in design and provide a high level of control accuracy in any system. Different features, including low-pressure cut-offs and internal relief options, make the complete line a top option in any type of natural gas, propane, LP or air system.

Gas Safety ValvesThese valves automatically control main gas flow. Our automatic pilot valves shut off both the main and pilot gases. Pilot gas is tapped from the main line within the control. Gas will flow only to the pilot burner when the reset button is depressed. The manual pilot valve stop can be adjusted for maximum pilot flow.

With more than 1,050 employees and 130,000 safety valves produced per year, LESER is the largest manufacturer of safety valves in Europe and one of the leading companies in its industry worldwide.

LESER offers spring loaded and pilot operated safety valves for all industrial applications according to the Pressure Equipment Directive and ASME XIII. Major companies in the chemical, oil and gas, petrochemical, energy, technical gases, LNG/LPG, pharmaceutical, food and beverage, shipbuilding and heating and air conditioning industries use LESER safety valves.

LESER safety valves are developed for the international market in Hamburg and manufactured in the modern plant in Hohenwestedt/Germany. In addition, LESER produces safety valves to the same standards in India and China for the local markets. Nine subsidiaries and offices in Europe, America, the Middle East and Asia as well as authorized contacts in over 80 countries guarantee competent customer advice and fast, reliable deliveries.

The world is rapidly changing. As the industries we serve face increasing pressure to reduce their carbon footprint, digitally transform processes and optimize operations, the Valves team at Baker Hughes is ready to help our customers meet those challenges. Our culture of innovation and legacy of quality make us uniquely positioned to recognize and adapt to changing industry trends. From staying abreast of new manufacturing processes and materials sciences development, to converting our facilities and processes to reduce our own carbon footprint, we are creating solutions to help customers achieve their goals.

Relief valves are installed downstream of a pressure reducing regulator and vent excess pressure in case the main regulator fails to close. They are also known as a downstream overpressure protection device, which is required when the internal relief valve of the upstream regulator is inadequate.

Designed to vent directly to atmosphere in outdoor installations, these “pop” style relief valves are economical for high pressures with high flows. Brass construction with a weather cap is standard.

With a variety of sizes and options available, these “pop” style relief valves can be used both outdoors & indoors. Cast iron construction is standard and a weather cap is available.

Designed for installation in stationary ASME applications such as bulk plant, skid tanks, underground and above ground containers as the primary pressure relief valve.

A back pressure regulator designed for a large variety of process applications. Used for any type of industry and ideal for liquids, air as well as gas applications.

The RV10 safety relief valve is well-suited for overpressure protection of production equipment, including compressors, scrubbers, separators, pipelines or anywhere overpressure protection may be required.

Natural gas supply lines are exposed and vulnerable at the meter, and can easily be broken by impact from vehicles, landscape equipment, falling snow and ice, and more-often leading to a catastrophic incident.

When concrete or steel bollards are used to protect gas meter piping from damage, these often only provide nominal protection. In many cases, the bollards are actually the cause of the gas line rupture.

HaloValve is a patented breakaway valve installed to the riser where most breaks occur. Upon impact, HaloValve instantly seals the line, preventing the flow and accumulation of gas until the line can be repaired.

Because of their rigidity, gas risers and associated meter piping can easily break upon impact, causing dangerous leaks. HaloValve creates an intentional weak point in the meter set piping assembly, resulting in an engineered point that instantly self-seals.

HaloValve is a patented breakaway valve installed to the riser where most breaks occur. Upon impact, HaloValve instantly seals the line, preventing the flow and accumulation of gas until the line can be repaired.

Taylor Valve Technology® is a manufacturer leader in high-quality industrial valves. We deliver safety relief, high-pressure relief, and back pressure relief valves. Our wide array of choke and control valves and pilot-operated valve products are second to none. Products are designed for demanding industrial needs, meeting quality API and ASME Code requirements. High-demand oil & gas industry, chemical plants, power generators, and the processing industry depend on our valves for consistency and durability. Get effective flow control of liquid, steam, and gas. Valves ship from the Taylor Valve Technology, Inc. United States facility. Delivering worldwide, you can depend on quick turnaround times.