safety valve repair supplier

We use only original parts and guarantee to return your valve to like-new or better condition, so you have total assurance that your valves will work properly.

We also provide on-site electronic testing of your safety valves while your plant operates as an option. IVI is cognizant of the need to complete safety valve projects within a designated time frame. We pride ourselves on meeting critical deadlines during outages/shutdowns. We attribute this success to the planning of the projects and attention to detail by our project managers. In addition, IVI can provide technical support and maintenance coordination for all your valve repairs - during outages as well - and will have you back online with the least amount of downtime. This ensures that you will attain an extensive reduction in operating costs resulting in greater profits.

Of all the challenges you face keeping your customers’ plants operating at full capacity, safety and relief valves shouldn’t be one of them. NASVI’s job is to give you the confidence that your valve supply chain is rock solid regardless the pressure it’s under.

Through alliances and partnerships with 28 of the world’s top valve manufacturers, United Valve provides factory authorized valve modifications and repair services to a broad spectrum of distributors and end-users. Our 60,000 sq. ft. facility is located in Houston, Texas, in the heart of the Texas refining and petrochemical belt.

United Valve – About Us – Company HistoryOur shop is equipped with state of the art machining, welding, pressure testing and non-destructive evaluation equipment. From X-ray radiography to CNC machining equipment, United Valve is vertically integrated to handle virtually any type of valve service in-house, with work performed by an experienced staff of technicians and craftsmen. Four overhead bridge cranes with a 25’ hook height enable us to handle valves up to 30 tons.

SVI Industrial offers both shop and field diagnostic and control valve repair services. By utilizing “Bench Mark” diagnostic equipment, we can input your control valve’s configuration information, run baseline tests, then provide detailed documentation that will show the valve’s performance. This information can be used to determine if your control valve needs minor instrumentation calibrations or possibly a major overhaul.

We can work independently or with your reliability engineers to establish a database of your safety relief devices throughout your plant. You can count on our experience and knowledge to establish a recommended frequency of safety valve testing and repairs of your safety valves, that meet your corporate requirements and requirements set by your state inspector and insurance auditor based on “best practices” from the National Board.

SVI Industrial holds three “VR” certificates from the National Board of Boiler and Pressure Inspectors authorizing our technicians to repair, set and certify safety pressure valves inline, on our customer’s site and at any of our shop locations for both ASME Section I and VIII code stamped safety valves. Our skilled valve technicians will evaluate the condition of your safety valve, make the proper recommendations and work diligently to get your safety valves tested, repaired and set to the correct specifications and back in-line as quickly as possible in order to minimize interruption of your daily operations.

We are a turnkey service provider with the capability to service, repair or replace your welded in-line steam safety valves, including pipe prep, welding, removal and heat treating. SVI Industrial is your one-stop source for all of your industrial safety valve repair and other maintenance needs.

Legislation requires that the owner of a facility has access to repair and recertification documents for pressure management equipment. Our pressure management experts provide relief valve asset audits to generate, maintain, and utilize applicable data for use in your facility’s maintenance planning activities and recertification.

At each of our 12 convenient locations, the Chalmers & Kubeck Valve and Actuation Technicians are factory trained and certified. Each expert Technician is required to meet stringent factory standards prior certification so you can be confident that we will provide the expert, efficient, and comprehensive service that you expect.

Our services include field trouble shooting, actuator refurbishment, control enhancement, electronic valve testing, torque verification, turnkey overhauls / repairs, retrofits, and valve testing / certification. We offer complete reconditioning of ball valves, butterfly valves, check valves, control valves, gate valves, globe valves, parallel slide valves, pilot operated valves, plug valves, pressure relief valves, pressure safety valves, vacuum break valves, and other specialty valves.

Baker Hughes manufactures the premier boiler safety valves and pressure relief valves in the industry, Consolidated®, and authorizes a very select group of companies to be their exclusive factory authorized repair and service centers, known as Green Tag Centers® (GTC). Ten of the 12 C&K Service Locations are GTCs, which means that you will receive best-in-class aftermarket product support. With our OEM trained and certified valve technicians, you know that your relief valves will be rebuilt correctly to exacting standards. Prior to certification, each of our valve technicians must go through Baker Hughes classroom training that includes applicable codes and standards, proprietary repair procedures, and practical hands-on instruction. The technician must prove their proficiency during both written and practical examinations covering relief valve repair, assembly, and testing. With our certified Green Tag Technicians, you can rest assured that your valves will be serviced in compliance with ASME and NBBI (National Board of Boiler and Pressure Vessel Inspectors) standards so they perform their critical safety function as intended.

Each of our GTC service locations has compete machining capabilities, calibrated measuring and testing equipment, specialized electronic valve testing equipment, and ValvKeep, a proprietary electronic data management system, so you can track and trend the repair history of your valves. We also carry significant inventory of Consolidated pressure relief valves and OEM certified replacement parts ensuring rapid response to your urgent repair needs. If for some reason we don’t have a part in stock locally, we have access to all parts stocked by GTCs throughout the entire United States and can have them overnight shipped to one of our service centers. We are your trusted local pressure relief valve service center whether your valves are Consolidated or another manufacturer’s brand.

Since the first installation of its Limitorque Machine (limit & torque capable) in 1929, Limitorque has been manufacturing some of the most innovative and dependable motor-operated valve actuators for demanding industrial applications.  Flowserve, the parent company of Limitorque, authorizes a select group of companies to be their “Limitorque Blue Ribbon” service and repair centers.  Chalmers & Kubeck is proud to be the largest Limitorque Distributor east of the Mississippi River and that all twelve (12) of our locations are Limitorque Blue Ribbon Service Centers.  With over 20 years  providing outstanding Blue Ribbon Service, C&K is your go-to solution for actuator sizing, selection, adaptation, installation / certification, maintenance, repair, and field service.

This team of valve and instrument specialists works closely together to provide customer assistance in technical sales, quotations and delivery. Chalmers & Kubeck maintains around-the -clock service, which includes the assembly and test of new CONSOLIDATED® pressure relief valves, plus full machining and repair operations for industrial valves of many types and manufacturers. Additionally, C&K provides comprehensive design and manufacturing services to adapt your existing manual valve or a new manual valve to a motor operated actuator for enhanced process control and operator safety.

Admiral Valve provides safety valves for a diversified customer base including ethanol, chemical, food processing, manufacturing and petroleum industries. We are certified in accordance with both the American Society of Mechanical Engineers (A.S.M.E.) and the National Board of Boiler and Pressure Vessel Inspectors (NBIC). Being in business for more than 50 years, we take pride in our ability to ensure customer satisfaction that each valve is certified to the highest standards for performance, safety and reliability. In addition to supplying customers with high quality safety valves, we also repair several different types of valves from a variety of manufacturers. Holding National Board Stamp #23, we are among the oldest certified repair facilities in the world.

Safety valves are used in a variety of industrial applications to include air/gas, vapor, steam, and liquid service, among many more. These pressure relief valves are critical to the safe operation of our customer’s equipment and provide—as their name implies—a safety measure that can reduce the number of risks that can threaten both your personnel and facilities.

Millennium Power Services’ safety valve technicians will get your valves tested, repaired, and quickly set to the exact specifications. We serve as your knowledge partner and will also evaluate the repair condition of every valve and make recommendations as needed to help you make the best decisions.

At Flotech we believe that it is possible to perform our services while rigorously protecting people and our environment. Our commitment to best practices safety procedures starts with hiring right, new employee training,  and continuous reinforcement of workplace safety practices.

Flotech operates valve and automation service centers in Jacksonville, Florida, Mobile, Alabama, and Charleston, South Carolina. From these locations, we can provide complete valve repair service as well as valve actuation, modification, certification, and testing for the Southeast area: Florida, Alabama, Georgia, Virginia, SouthCarolina, and North Carolina.

Specialized in maintenance and repair services for valves, boilers, heat exchangers, regulators, actuators, turbines and other products. Capabilities include in-line machining, fabrication, turning, welding, engineering, inspection, testing and consulting. Suitable for petrochemical, pharmaceutical, commercial, construction, power generation, HVAC, pulp and paper applications. Additional services include polishing, sandblasting, powder coating, plating and painting. Serves the chemical, hospital, oil, gas, manufacturing plant, food and beverage industries. Meets ASME standards and military specifications. 1-year warranty.

Certified Safety Valve Repair, located in Linden, NJ, has served the tri-state area for over 30 years. Providing service to Power Generating, Chemical and Manufacturing Plants and even our U.S. Navy Vessels.

Certified Safety Valve Repair has been authorized by the National Board of Pressure Vessel Inspectors, VR program to repair and certify any Section I or Section VIII Pressure Relief Device.

We are also the authorized repair facility for Anderson Greenwood Crosby Valve. This corporation is one of the leaders in the industry for manufacturing Section I, and Section VIII Safety-Relief Valves.

Our corporation is fully insured and certified by the Association of Safety Valve Calibrators, The Defense Manufacturers & Suppliers Association and the Quality Control Motivations Program, just to name a few.

TSV Service & Sales, a Division of TRIVACO, offers over 55 years of experience in the Industrial, Commercial and Institutional Industry as mechanical specialty sales engineers and application engineering.  As the “Factory Authorized Assembler” of Kunkle Relief Valves for the State of Indiana and western Kentucky. We provide Kunkle Safety Valves to Industrial Distributors and carry a local inventory of Kunkle Safety Valves that we can ship to you or drop ship to your customer.

Everyone is encouraged to call us and schedule a sales call to discuss our FREE survey of safety valves in your plant. This allows us to identify any relief valve installation problems and check to see if the valves are for the application and service. You will receive value from this service by addressing any potential safety issues proactively and not waiting until an unfortunate event occurs to act!

TSV also keeps record of manufacturer’s specifications for Kunkle Valve, Farris, Consolidated, Crosby and more to ensure the accuracy and quality of your valves.

We have certified our shop with The National Board and now hold the following code stamps; VR, UV, V and NB. This enables us to repair Kunkle Valve or ANY other manufacturer’s code stamped safety/relief valve, to new condition, right here in Indianapolis!

Everyone is encouraged to call us and schedule a sales call to discuss our FREE survey of safety valves in your plant. This allows us to identify any relief valve installation problems and check to see if the valves are for the application and service. You will receive value from this service by addressing any potential safety issues proactively and not waiting until an unfortunate event occurs.

Spartan Controls offers original equipment manufacturer (OEM) and regulatory-compliant repair and re-certification of pressure safety valves. Supporting your safety valve total lifecycle is our business – both through depot repair and on-site services – anytime, anywhere.

Spartan’s safety relief valve repair team is comprised of highly trained and experienced relief valve professionals. In-depth hands-on and field training ensures that their extensive factory certification training is combined with application knowledge for complete solution expertise.

We also offer our “ANSI” shop, repairing and selling rebuilt pumps, ball valves, orbits and gate valves. Our on-site service utilizes four mobile units and one emergency unit.

We also recognize the importance of safety and training. The Mercer Valve Repair Division has an extensive training program to ensure that only qualified technicians are working on our customer’s valves.

Mercer Valve began its valve repair business in 1986, under the direction of Wesley L. Taylor. We became “VR” certified in 1986. In the fall of 1989, Glen Quillin became the Valve Repair Manager where he brought fifteen years of oil and gas industry experience to Mercer’s team. Since then, the Repair Division has grown from a two-man shop to 21 employees.

Renew-CVG specializes in industrial valve parts and repair services for the power, steel, refining, paper and chemical industries. Based in both Monroe, MI, and Cleveland, OH, our technical staff brings more than 100 years of combined experience to every customer we serve. We have earned a trusted reputation in the industry by maintaining close working relationships with our customers" engineering and maintenance staffs in order to address fluid handling challenges and provide customized process solutions.

Established in 1960 by Oscar "Dale" Blair, the original Renew Valve began repairing valves for Detroit Edison at the two local power plants. Over the next 20 years, it became a valuable supplier to the entire Detroit Edison system, both in machining and valve repair and new valve replacements. The company built up a complete machine shop and testing facility, manufacturing parts when needed for the valves, pumps, and boilers for the growing number of customers in the Detroit area.

Founded in Cleveland by the George Ruf family in 1857, the original Cleveland Steam Gauge Company manufactured a line of steam and vacuum pressure gauges and maintained a complete machine shop which manufactured parts when needed for the valves, pumps and boilers for the growing number of steamships then navigating the Great Lakes.

In 1965, Vernon Schill, Dan Cardina and Anthony Brock purchased the company and focused more on valve repair – becoming the recognized authority on all types of gate, globe, ball, check, plug and control valves. It became a founding member of the National Board "VR" Safety Relief Valve Repair certification program.

In 2004, Renew Valve & Machine Company and Cleveland Valve & Gauge joined forces. Together they have become the recognized authority on all types of gate, globe, ball, check, plug and control valves in Michigan, Ohio and Indiana. It was a founding member of the National Board "VR" Safety Relief Valve repair certification program as well as an early constructive Green Tag Service Center for Dresser Industries and their Consolidated, Dewrance, and Hancock valve product lines.

Whether it"s a specific valve component, a complex Infield machining project, an obsolete valve part fabrication, a pre-shutdown valve survey or a packing or gasketing solution, our team is available to address you flow control challenge on-site or at our repair facility.

We have a 3,000 ft2 staffed facility with factory trained technicians and engineers to service and repair a wide variety of measurement, process control and gas detection equipment. Our technicians are able to perform service on site or in our workshops and are available to respond to most urgencies on a 24 hour, round the clock, basis.

The Mec-Tric Repair Shop is an ASME (American Society of Mechanical Engineers) and National Board certified repair shop. Our certifications include Section I (boiler code) and Section VIII (pressure vessel code). We are authorized in these sections for Air, Steam, Water, and Vapor.

Mec-Tric Control Company is authorized to assemble and repair safety valves by the National Board and A.S.M.E Code Section I and Section VIII for Air, Steam, Liquid, and Vapor.

Mec-Tric Control Company is the representative for the most well known regulator, the Spence regulator. Being a manufacturers representative gives Mec-Tric an advantage over other repair facilities. We repair regulators to like new condition and inventory many sizes and types.

We also repair and assemble Control Valves giving the same attention as our Safety Valve and Regulator programs. Mec-Tric calibrates the valve to receive pneumatic signals as well as electro-pneumatic signals.

We also provide in place testing at your facility or factory to minimize down time. Mec-Tric’s in place testing equipment allows for diagnosis of valves operating correctly and repair of valves not meeting specifications. This helps eliminate customer down time and limits the amount of valves customers must maintain in stock.