safety valve repair factory

Safety valves are used in a variety of industrial applications to include air/gas, vapor, steam, and liquid service, among many more. These pressure relief valves are critical to the safe operation of our customer’s equipment and provide—as their name implies—a safety measure that can reduce the number of risks that can threaten both your personnel and facilities.

Millennium Power Services’ safety valve technicians will get your valves tested, repaired, and quickly set to the exact specifications. We serve as your knowledge partner and will also evaluate the repair condition of every valve and make recommendations as needed to help you make the best decisions.

We use only original parts and guarantee to return your valve to like-new or better condition, so you have total assurance that your valves will work properly.

SVI Industrial offers both shop and field diagnostic and control valve repair services. By utilizing “Bench Mark” diagnostic equipment, we can input your control valve’s configuration information, run baseline tests, then provide detailed documentation that will show the valve’s performance. This information can be used to determine if your control valve needs minor instrumentation calibrations or possibly a major overhaul.

We can work independently or with your reliability engineers to establish a database of your safety relief devices throughout your plant. You can count on our experience and knowledge to establish a recommended frequency of safety valve testing and repairs of your safety valves, that meet your corporate requirements and requirements set by your state inspector and insurance auditor based on “best practices” from the National Board.

SVI Industrial holds three “VR” certificates from the National Board of Boiler and Pressure Inspectors authorizing our technicians to repair, set and certify safety pressure valves inline, on our customer’s site and at any of our shop locations for both ASME Section I and VIII code stamped safety valves. Our skilled valve technicians will evaluate the condition of your safety valve, make the proper recommendations and work diligently to get your safety valves tested, repaired and set to the correct specifications and back in-line as quickly as possible in order to minimize interruption of your daily operations.

We are a turnkey service provider with the capability to service, repair or replace your welded in-line steam safety valves, including pipe prep, welding, removal and heat treating. SVI Industrial is your one-stop source for all of your industrial safety valve repair and other maintenance needs.

No question about it. North American Safety Valve’s repair services keep your safety valves at optimum operating efficiency. Our valve repair program is comprehensive. With safety valve rebuilds, upgrades, maintenance and service included, you never have to worry about uptime… or it costing a fortune.

Your safety valves are in good hands. NASVI employs factory-trained personnel who are skilled at spotting potential problems with your valves and recommending the most effective and economical ways to solve them.

NASVI has the exact specifications for nearly every safety valve ever manufactured, meaning our technicians repair valves to precise specifications. With six lathes on site, we work quickly to restore tolerances on existing parts. If, by some chance, a part cannot be restored, generally, we can replace it from our extensive in-house inventory.

Should an update be needed along with repair, our technicians bring valve designs up to the latest standards using factory-standard parts. For peace of mind, all repaired valve units are covered by our one-year standard warranty.

At Pioneer, we never stop growing. This means we are always looking for quicker, more efficient ways to return your equipment to the high-performing standards your business counts on every working day. Our experienced staff is trained to spot even the smallest inefficiencies in any safety relief valve system because even the smallest flaws can lead to some serious issues down the road. We keep a large inventory of equipment from industry-leading providers so we’re always prepared to replace, retrofit, or maintain any aspect of your safety valve system.

Safety Valve Repairs are done by a certified repair facility whose main purpose is to keep your safety valves operating efficiently and within code. Their factory trained technicians can immediately identify potential and provide solutions on the spot. Their rebuilt valves have a one-year standard warranty.

At each of our 12 convenient locations, the Chalmers & Kubeck Valve and Actuation Technicians are factory trained and certified. Each expert Technician is required to meet stringent factory standards prior certification so you can be confident that we will provide the expert, efficient, and comprehensive service that you expect.

Our services include field trouble shooting, actuator refurbishment, control enhancement, electronic valve testing, torque verification, turnkey overhauls / repairs, retrofits, and valve testing / certification. We offer complete reconditioning of ball valves, butterfly valves, check valves, control valves, gate valves, globe valves, parallel slide valves, pilot operated valves, plug valves, pressure relief valves, pressure safety valves, vacuum break valves, and other specialty valves.

Baker Hughes manufactures the premier boiler safety valves and pressure relief valves in the industry, Consolidated®, and authorizes a very select group of companies to be their exclusive factory authorized repair and service centers, known as Green Tag Centers® (GTC). Ten of the 12 C&K Service Locations are GTCs, which means that you will receive best-in-class aftermarket product support. With our OEM trained and certified valve technicians, you know that your relief valves will be rebuilt correctly to exacting standards. Prior to certification, each of our valve technicians must go through Baker Hughes classroom training that includes applicable codes and standards, proprietary repair procedures, and practical hands-on instruction. The technician must prove their proficiency during both written and practical examinations covering relief valve repair, assembly, and testing. With our certified Green Tag Technicians, you can rest assured that your valves will be serviced in compliance with ASME and NBBI (National Board of Boiler and Pressure Vessel Inspectors) standards so they perform their critical safety function as intended.

Each of our GTC service locations has compete machining capabilities, calibrated measuring and testing equipment, specialized electronic valve testing equipment, and ValvKeep, a proprietary electronic data management system, so you can track and trend the repair history of your valves. We also carry significant inventory of Consolidated pressure relief valves and OEM certified replacement parts ensuring rapid response to your urgent repair needs. If for some reason we don’t have a part in stock locally, we have access to all parts stocked by GTCs throughout the entire United States and can have them overnight shipped to one of our service centers. We are your trusted local pressure relief valve service center whether your valves are Consolidated or another manufacturer’s brand.

Since the first installation of its Limitorque Machine (limit & torque capable) in 1929, Limitorque has been manufacturing some of the most innovative and dependable motor-operated valve actuators for demanding industrial applications.  Flowserve, the parent company of Limitorque, authorizes a select group of companies to be their “Limitorque Blue Ribbon” service and repair centers.  Chalmers & Kubeck is proud to be the largest Limitorque Distributor east of the Mississippi River and that all twelve (12) of our locations are Limitorque Blue Ribbon Service Centers.  With over 20 years  providing outstanding Blue Ribbon Service, C&K is your go-to solution for actuator sizing, selection, adaptation, installation / certification, maintenance, repair, and field service.

This team of valve and instrument specialists works closely together to provide customer assistance in technical sales, quotations and delivery. Chalmers & Kubeck maintains around-the -clock service, which includes the assembly and test of new CONSOLIDATED® pressure relief valves, plus full machining and repair operations for industrial valves of many types and manufacturers. Additionally, C&K provides comprehensive design and manufacturing services to adapt your existing manual valve or a new manual valve to a motor operated actuator for enhanced process control and operator safety.

Our nationally certified Valve Repair Centers in Winslow, ME and Cazenovia, NY are staffed by factory-trained and certified technicians.Masoneilan Authorized Repair Centers (MARC)

We have the capability to service your safety, pressure relief and control valves at your site or in one of our repair centers. Our services include:Inspection & testing

From high-quality products to repairs, from installation and set-up to regular maintenance and testing –you name it, we"ve got it. We also have in-stock valves and critical products that can be hard to find, especially for emergency service jobs.

Legislation requires that the owner of a facility has access to repair and recertification documents for pressure management equipment. Our pressure management experts provide relief valve asset audits to generate, maintain, and utilize applicable data for use in your facility’s maintenance planning activities and recertification.

We provide onsite safety relief valve diagnostic testing and repair services while helping you manage your overpressure protection assets for regulatory compliance.

Spartan Controls offers original equipment manufacturer (OEM) and regulatory-compliant repair and re-certification of pressure safety valves. Supporting your safety valve total lifecycle is our business – both through depot repair and on-site services – anytime, anywhere.

Spartan’s safety relief valve repair team is comprised of highly trained and experienced relief valve professionals. In-depth hands-on and field training ensures that their extensive factory certification training is combined with application knowledge for complete solution expertise.

Pressure safety valves are designed to protect process piping and equipment in case of an overpressure event. TEAM Valve Solutions inspects, tests, repairs and re-certifies safety valves at 17 service centers across three continents, and in our fleet of mobile facilities, all of which are audited under the jurisdiction of relevant governing bodies.

Our solutions cover all major safety valve brands and support our customers through an inventory of spare parts and loose-assembled valves. In addition, our facilities are audited and governed by the National Board of Boiler and Pressure Vessel Inspectors. Testing, repair, and assembly are performed under license and guidelines of NBIC, and ASME Section I and VIII.

To ensure accurate in-line setpoint verification, TEAM Valve Solutions utilizes Trevitest, the pioneering system for validating safety valve performance in Conventional and Nuclear Power plants, as well as in other industrial process facilities.

Experitec is an authorized Anderson Greenwood™ and Crosby™ assembler and a National Board-Certified VR, Test Only, and ASME UV stamp holder. As such, we carry an extensive inventory of Anderson Greenwood and Crosby parts and assemblies right on the shelf. In addition, we have the ability to source pressure relief valves from a variety of manufacturers. This combination allows Experitec to repair all your pressure relief valves. Our vision is to serve our customers like no others. We can and will cater to your specific needs. Remember, don’t let the lack of a qualified PRV repair compromise the safety of your plant and your people.

Need more flexibility? We offer our customers the option of providing an Experitec 40-foot mobile repair trailer on-site or a 16-foot trailer for those smaller and quick turnaround jobs.

IVI is a VR certified safety valve repair facility, approved by the National Board of Boiler and Pressure Vessel Inspectors as a VR certificate holder (stamp 179). We certify pressure relief valves in the shop and in the field for sections V and UV. We also perform on-site testing (while the plant operates) providing documented reports for all valves tested. We are also certified to administer special process conversions regarding machining, welding, heat treating, and N.D.T. (non-destructive testing) with our VR certificate.

With our VR stamp, we repair all types of pressure relief valves such as Consolidated, Crosby, Kunkle, Farris, Spence, Anderson Greenwood, and numerous other O.E.M. safety and pressure relief valves.

Pressure relief and safety valves are designed to protect your plant’s assets — both physical and human. No less than 100% reliability is essential. With decades of experience and a skilled team of field technicians and application engineers, Control Associates is available to service Emerson customers throughout the Northeast region. Our technicians provide onsite, emergency, repair and testing services for all types and brands of industrial pressure, pressure relief, or safety valves.

Specialized in maintenance and repair services for valves, boilers, heat exchangers, regulators, actuators, turbines and other products. Capabilities include in-line machining, fabrication, turning, welding, engineering, inspection, testing and consulting. Suitable for petrochemical, pharmaceutical, commercial, construction, power generation, HVAC, pulp and paper applications. Additional services include polishing, sandblasting, powder coating, plating and painting. Serves the chemical, hospital, oil, gas, manufacturing plant, food and beverage industries. Meets ASME standards and military specifications. 1-year warranty.

Certified Safety Valve Repair, located in Linden, NJ, has served the tri-state area for over 30 years. Providing service to Power Generating, Chemical and Manufacturing Plants and even our U.S. Navy Vessels.

Certified Safety Valve Repair has been authorized by the National Board of Pressure Vessel Inspectors, VR program to repair and certify any Section I or Section VIII Pressure Relief Device.

We are also the authorized repair facility for Anderson Greenwood Crosby Valve. This corporation is one of the leaders in the industry for manufacturing Section I, and Section VIII Safety-Relief Valves.

Our corporation is fully insured and certified by the Association of Safety Valve Calibrators, The Defense Manufacturers & Suppliers Association and the Quality Control Motivations Program, just to name a few.

Certified Safety Valve Repair Corp."s M.C.S., LLC has been providing precision safety valve maintenance and consulting services for over 45 years. M.C.S. (Maintenance, Consulting, and Services) provides unparalleled service by combining expert consulting and skilled labor in order to accomplish a wide range of maintenance tasks.

We will advise as to any inspections that should be performed in order to comply with A.S.M.E. and National Board Standards in regard to {V}, {UV}, [VR] stamped code requirements, pertaining to pressure vessels and the safety relief devices protecting those systems.

Upon fully addressing customer concerns, we will begin to outline areas where corrective actions and repairs could be completed in order to minimize unexpected downtime in the future and maximize efficiency.

Once the areas of concern have been outlined we can begin to estimate costs for implementing the corrective actions and necessary repairs to equipment. We also supply replacement cost analysis for equipment and recommend maintenance intervals for new or repaired equipment.

Certified Safety Valve Repair Corp. offers a full complement of maintenance services. Our commercial and industrial maintenance services include removals, installations, and metal fabrications. We have over 45 years of experience with boiler and heat exchanger maintenance and repair. We perform parts rebuilding and trim replacement (and/or modification), with metal spray procedures for corrosion resistance.

Our ASME and National Board authorized valve repair facility serves as a one-stop shop for sales, service, repair, testing, and certification for the widest possible variety of valves

We also offer metal build up and finish machining to original specifications, for shafts, bearings, valve trim, tanks, and other components. We provide services to a wide variety of industries, including serving our United States Navy,Coast Guard and ABS Vessels in general ship repairs, which includes military/coast guard and ABS vessels.

For more information about our precision safety valve maintenance and consulting services, or our other capabilities, please contact Certified Safety Valve Repair Corp.