safety valve repair manufacturer

Safety valves are used in a variety of industrial applications to include air/gas, vapor, steam, and liquid service, among many more. These pressure relief valves are critical to the safe operation of our customer’s equipment and provide—as their name implies—a safety measure that can reduce the number of risks that can threaten both your personnel and facilities.

Millennium Power Services’ safety valve technicians will get your valves tested, repaired, and quickly set to the exact specifications. We serve as your knowledge partner and will also evaluate the repair condition of every valve and make recommendations as needed to help you make the best decisions.

SVI Industrial offers both shop and field diagnostic and control valve repair services. By utilizing “Bench Mark” diagnostic equipment, we can input your control valve’s configuration information, run baseline tests, then provide detailed documentation that will show the valve’s performance. This information can be used to determine if your control valve needs minor instrumentation calibrations or possibly a major overhaul.

We can work independently or with your reliability engineers to establish a database of your safety relief devices throughout your plant. You can count on our experience and knowledge to establish a recommended frequency of safety valve testing and repairs of your safety valves, that meet your corporate requirements and requirements set by your state inspector and insurance auditor based on “best practices” from the National Board.

SVI Industrial holds three “VR” certificates from the National Board of Boiler and Pressure Inspectors authorizing our technicians to repair, set and certify safety pressure valves inline, on our customer’s site and at any of our shop locations for both ASME Section I and VIII code stamped safety valves. Our skilled valve technicians will evaluate the condition of your safety valve, make the proper recommendations and work diligently to get your safety valves tested, repaired and set to the correct specifications and back in-line as quickly as possible in order to minimize interruption of your daily operations.

We are a turnkey service provider with the capability to service, repair or replace your welded in-line steam safety valves, including pipe prep, welding, removal and heat treating. SVI Industrial is your one-stop source for all of your industrial safety valve repair and other maintenance needs.

We also provide on-site electronic testing of your safety valves while your plant operates as an option. IVI is cognizant of the need to complete safety valve projects within a designated time frame. We pride ourselves on meeting critical deadlines during outages/shutdowns. We attribute this success to the planning of the projects and attention to detail by our project managers. In addition, IVI can provide technical support and maintenance coordination for all your valve repairs - during outages as well - and will have you back online with the least amount of downtime. This ensures that you will attain an extensive reduction in operating costs resulting in greater profits.

At Pioneer, we never stop growing. This means we are always looking for quicker, more efficient ways to return your equipment to the high-performing standards your business counts on every working day. Our experienced staff is trained to spot even the smallest inefficiencies in any safety relief valve system because even the smallest flaws can lead to some serious issues down the road. We keep a large inventory of equipment from industry-leading providers so we’re always prepared to replace, retrofit, or maintain any aspect of your safety valve system.

Of all the challenges you face keeping your customers’ plants operating at full capacity, safety and relief valves shouldn’t be one of them. NASVI’s job is to give you the confidence that your valve supply chain is rock solid regardless the pressure it’s under.

No question about it. North American Safety Valve’s repair services keep your safety valves at optimum operating efficiency. Our valve repair program is comprehensive. With safety valve rebuilds, upgrades, maintenance and service included, you never have to worry about uptime… or it costing a fortune.

Your safety valves are in good hands. NASVI employs factory-trained personnel who are skilled at spotting potential problems with your valves and recommending the most effective and economical ways to solve them.

NASVI has the exact specifications for nearly every safety valve ever manufactured, meaning our technicians repair valves to precise specifications. With six lathes on site, we work quickly to restore tolerances on existing parts. If, by some chance, a part cannot be restored, generally, we can replace it from our extensive in-house inventory.

Should an update be needed along with repair, our technicians bring valve designs up to the latest standards using factory-standard parts. For peace of mind, all repaired valve units are covered by our one-year standard warranty.

Through alliances and partnerships with 28 of the world’s top valve manufacturers, United Valve provides factory authorized valve modifications and repair services to a broad spectrum of distributors and end-users. Our 60,000 sq. ft. facility is located in Houston, Texas, in the heart of the Texas refining and petrochemical belt.

United Valve – About Us – Company HistoryOur shop is equipped with state of the art machining, welding, pressure testing and non-destructive evaluation equipment. From X-ray radiography to CNC machining equipment, United Valve is vertically integrated to handle virtually any type of valve service in-house, with work performed by an experienced staff of technicians and craftsmen. Four overhead bridge cranes with a 25’ hook height enable us to handle valves up to 30 tons.

At each of our 12 convenient locations, the Chalmers & Kubeck Valve and Actuation Technicians are factory trained and certified. Each expert Technician is required to meet stringent factory standards prior certification so you can be confident that we will provide the expert, efficient, and comprehensive service that you expect.

Our services include field trouble shooting, actuator refurbishment, control enhancement, electronic valve testing, torque verification, turnkey overhauls / repairs, retrofits, and valve testing / certification. We offer complete reconditioning of ball valves, butterfly valves, check valves, control valves, gate valves, globe valves, parallel slide valves, pilot operated valves, plug valves, pressure relief valves, pressure safety valves, vacuum break valves, and other specialty valves.

Baker Hughes manufactures the premier boiler safety valves and pressure relief valves in the industry, Consolidated®, and authorizes a very select group of companies to be their exclusive factory authorized repair and service centers, known as Green Tag Centers® (GTC). Ten of the 12 C&K Service Locations are GTCs, which means that you will receive best-in-class aftermarket product support. With our OEM trained and certified valve technicians, you know that your relief valves will be rebuilt correctly to exacting standards. Prior to certification, each of our valve technicians must go through Baker Hughes classroom training that includes applicable codes and standards, proprietary repair procedures, and practical hands-on instruction. The technician must prove their proficiency during both written and practical examinations covering relief valve repair, assembly, and testing. With our certified Green Tag Technicians, you can rest assured that your valves will be serviced in compliance with ASME and NBBI (National Board of Boiler and Pressure Vessel Inspectors) standards so they perform their critical safety function as intended.

Each of our GTC service locations has compete machining capabilities, calibrated measuring and testing equipment, specialized electronic valve testing equipment, and ValvKeep, a proprietary electronic data management system, so you can track and trend the repair history of your valves. We also carry significant inventory of Consolidated pressure relief valves and OEM certified replacement parts ensuring rapid response to your urgent repair needs. If for some reason we don’t have a part in stock locally, we have access to all parts stocked by GTCs throughout the entire United States and can have them overnight shipped to one of our service centers. We are your trusted local pressure relief valve service center whether your valves are Consolidated or another manufacturer’s brand.

Since the first installation of its Limitorque Machine (limit & torque capable) in 1929, Limitorque has been manufacturing some of the most innovative and dependable motor-operated valve actuators for demanding industrial applications.  Flowserve, the parent company of Limitorque, authorizes a select group of companies to be their “Limitorque Blue Ribbon” service and repair centers.  Chalmers & Kubeck is proud to be the largest Limitorque Distributor east of the Mississippi River and that all twelve (12) of our locations are Limitorque Blue Ribbon Service Centers.  With over 20 years  providing outstanding Blue Ribbon Service, C&K is your go-to solution for actuator sizing, selection, adaptation, installation / certification, maintenance, repair, and field service.

This team of valve and instrument specialists works closely together to provide customer assistance in technical sales, quotations and delivery. Chalmers & Kubeck maintains around-the -clock service, which includes the assembly and test of new CONSOLIDATED® pressure relief valves, plus full machining and repair operations for industrial valves of many types and manufacturers. Additionally, C&K provides comprehensive design and manufacturing services to adapt your existing manual valve or a new manual valve to a motor operated actuator for enhanced process control and operator safety.

Legislation requires that the owner of a facility has access to repair and recertification documents for pressure management equipment. Our pressure management experts provide relief valve asset audits to generate, maintain, and utilize applicable data for use in your facility’s maintenance planning activities and recertification.

Legislation requires that the owner of a facility has access to repair and recertification documents for pressure management equipment. Our pressure management experts provide relief valve asset audits to generate, maintain, and utilize applicable data for use in your facility’s maintenance planning activities and recertification.

We provide onsite safety relief valve diagnostic testing and repair services while helping you manage your overpressure protection assets for regulatory compliance.

Allied Valve is the industry leader in valve sales, service, and distribution. Driven by three key principles – safety, reliability, and quality – Allied Valve is a leading supplier of pressure relief valves, control valves, rupture discs, conservation vents, flame arresters, blanket gas regulators, back pressure valves, actuation, and valve services in the upper Midwest. Helping your business meet tight production schedules and reduce downtime with 24/7/365 services delivered on-time, on-site, and in-person, Allied Valve is your trusted partner to keep your business running seamlessly.

Our factory-trained, OEM-certified technicians deliver time-tested solutions that reduce downtime and costs while maintaining the integrity of your safety program. With locations in IA, IL, IN, MN, ND, OH, and WI, our 100+ certified service technicians are at your service. We operate five Consolidated Green Tag Centers, two authorized Kunkle Assemblers plants, and five Masoneilan™ Authorized Repair Center (MARC™), dedicated to providing quality products.

Experitec is an authorized Anderson Greenwood™ and Crosby™ assembler and a National Board-Certified VR, Test Only, and ASME UV stamp holder. As such, we carry an extensive inventory of Anderson Greenwood and Crosby parts and assemblies right on the shelf. In addition, we have the ability to source pressure relief valves from a variety of manufacturers. This combination allows Experitec to repair all your pressure relief valves. Our vision is to serve our customers like no others. We can and will cater to your specific needs. Remember, don’t let the lack of a qualified PRV repair compromise the safety of your plant and your people.

Need more flexibility? We offer our customers the option of providing an Experitec 40-foot mobile repair trailer on-site or a 16-foot trailer for those smaller and quick turnaround jobs.

At Flotech we believe that it is possible to perform our services while rigorously protecting people and our environment. Our commitment to best practices safety procedures starts with hiring right, new employee training,  and continuous reinforcement of workplace safety practices.

Flotech operates valve and automation service centers in Jacksonville, Florida, Mobile, Alabama, and Charleston, South Carolina. From these locations, we can provide complete valve repair service as well as valve actuation, modification, certification, and testing for the Southeast area: Florida, Alabama, Georgia, Virginia, SouthCarolina, and North Carolina.

The Mec-Tric Repair Shop is an ASME (American Society of Mechanical Engineers) and National Board certified repair shop. Our certifications include Section I (boiler code) and Section VIII (pressure vessel code). We are authorized in these sections for Air, Steam, Water, and Vapor.

Mec-Tric Control Company is authorized to assemble and repair safety valves by the National Board and A.S.M.E Code Section I and Section VIII for Air, Steam, Liquid, and Vapor.

Mec-Tric Control Company is the representative for the most well known regulator, the Spence regulator. Being a manufacturers representative gives Mec-Tric an advantage over other repair facilities. We repair regulators to like new condition and inventory many sizes and types.

We also repair and assemble Control Valves giving the same attention as our Safety Valve and Regulator programs. Mec-Tric calibrates the valve to receive pneumatic signals as well as electro-pneumatic signals.

We also provide in place testing at your facility or factory to minimize down time. Mec-Tric’s in place testing equipment allows for diagnosis of valves operating correctly and repair of valves not meeting specifications. This helps eliminate customer down time and limits the amount of valves customers must maintain in stock.

Spartan Controls offers original equipment manufacturer (OEM) and regulatory-compliant repair and re-certification of pressure safety valves. Supporting your safety valve total lifecycle is our business – both through depot repair and on-site services – anytime, anywhere.

Spartan’s safety relief valve repair team is comprised of highly trained and experienced relief valve professionals. In-depth hands-on and field training ensures that their extensive factory certification training is combined with application knowledge for complete solution expertise.

Trusted since 1967 in the industry, our sole focus is safety and safety relief valve products and services. We commit ourselves to our customers and to delivering the best products. Our certified technicians are continually trained in American Society of Mechanical Engineer safety, testing, and support procedures to ensure a superior product that goes beyond manufacturer standards. We also offer on-demand, hotshot, or same day, delivery for fast service. When you have a need, we meet it and make it happen with your needed solution.

With our sole commitment to safety and safety relief valves, Gulf Valve Service Company carries an expansive inventory of products and parts. Selections of hard to find parts in various metals from all manufactures are available from us when you have exhausted all other options.