baso safety valve price

1/4 Safety Valve * Gas Safety Valve. 100% Shutoff. 1/4 NPT74070 BTU. Use 30Mv Thermocouple. Warning!!! Gas Flows To Pilot And Main Burner When Reset Button Is Depressed!!!

When you’re working with gas, safety should be the name of the game. It’s extremely easy to cause a lot of damage, both to yourself and your establishment, when you’re not showing that invisible little devil the respect it deserves. Fortunately, modern-day gas safety valves have been tested and outfitted around the world, and these bad boys are essential pieces to any efficiently-working system. That said, when your gas safety valves are a little worse for wear, making a repair or finding a replacement is a no-brainer. That’s why keeping an extra in your repair kit or tool closet is a smart move, and we’ve got the gas safety valves you need!

Flame safety is a critical aspect of any gas-fired system, but it can present puzzling choices. What equipment do you need? Which parts can be substituted? At Charles A. Hones, Inc. we use Johnson Control’ line of Baso™ safety valves and other components to tailor flame safety on Buzzer gas burners and furnaces to the user’s needs. This brief guide can help you select the right equipment for your job.

The H15 series Baso valve will provide 100% shut down of gas flow in the event of pilot failure. The H15 series valve is recommended for low pressure gas only (1/2 PSI or 14”w/c). We supply this valve in four types of sets, as follows.

This set can be used on larger pipe burners and burners such as FR-14 and multiple pipe burners that include cross flame pilots. 1” Baso set can be used on larger ring burner and discport burners (606, 606A, 312 and 313), larger 2020 Fire-Box oven furnaces and larger melters (#2700, 171A and 172). List $250.

Note: Many Buzzer furnaces already include a #50 cast iron pilot (including the 171A, #250, #2700, ACR 60, and 185 salt bath furnace). Many Buzzer furnaces also come equipped with a redundant pilot system in which the smaller J99 style pilot ignites off the larger #50 cast iron pilot. Please call the factory if you have any questions. Additionally, parts can be substituted. For example, for an IH300 straight style complete with solenoid valves, gas cocks, and pressure gauges, you will need to replace the 60” thermocouple with a 72” thermocouple. This would add $16.00 to the cost. Please refer to the parts price list or call the Hones factory to assist in such modifications.

High pressure design allows use on gas pressures up to 25 PSI. Pilot gas is taken from within the control. Gas will pass to both pilot and main burner when reset button is depressed (H19RA 3/8" threads). Gas will not pass to the main burner equipped with flow interupter (H19LA 3/8" threads or the H19NA 1/4" threads) when reset button is depressed. Loss of signal from thermocouple shuts off both main and pilot burners. For complete specs on these Baso Valves, download the PDF below.