breville safety valve in stock

Hello Scott, Thank you for the question. According to the Website Availability, this is a Special Order part. This means we do not keep them in stock and order them in from Breville once we have an order for one. As long as Breville has stock ready to ship, this takes about 10-15 Business Days for the part to arrive at the Warehouse and approximately 3-7 business days to ship out and arrive to you. We hope this helps!

Breville Espresso machine was leaking water from the inside which not only made the machine unusable but also was shorting out internal contacts that would cause the house breaker to trip. (In my res

Look up internet videos on how to access the internal workings of the machine. The "safety valve" is plastic and screws onto the water pump. Mine broke off at the threaded connection (maybe due to vibration of the pump) and allowed the pump to spray water all over the internal workings. Replacing the safety vale was a simple matter of removing the water pump and unscrewing the broken threaded end of the old valve - the broken end was still screwed into the water pump but use of a Philips screwdriver as a makeshift "easy-out" got it right out. When installing the new safety valve, don"t forget the clear rubber washer that goes between the pump and the valve. Put everything back together and you"re in business. There is a separate video on the web about removing and installing the water pump. The same type and brand of water pump is used in a majority of these espresso machines and these things have a tendency to wear out in time. They are readily available and not expensive. I took the opportunity to replace mine while I was inside the machine.

The Breville Barista Express 860xl is a nice little semi-automatic espresso machine that I bought about 5 years ago for $450 (probably because the 870 was about to come out).

However, there’s definitely a little repair community around espresso machines generally and higher end Brevilles in particular. Some parts are also available though not all.

After opening the case, I could clearly see whitish deposits around the leak area where water had evaporated/boiled off. It seemed likely to me that the rubber o-ring had failed (see picture at end of post). Unfortunately, that o-ring is not available for purchase, so I took a leap and bought some o-rings proposed as suitable replacements for another Breville model. They ended up being the wrong size, and I so I bought a part that included the o-ring. I measured the o-ring and made some measurements below that may help others buy the right size o-ring from Grainger.

The real trick in this is to take a lot of photos and take your time. The over pressure valve (OPV) screws off without removing other components if you first remove the stem and loosen the rubber mount plate. This means cutting a zip tie; I found HyperTough zip ties from Walmart to have suitable mechanical properties for this connection (6/6 Nylon and reasonably high temp; see picture). However, the stem tightness regulates max pressure, so you either want to image the threads before removing or count the number of turns as you take off. Another gotcha is that the plastic white washer at the base of the OPV is directional, so you may want to mark it to ensure it goes back in with the same direction. Finally, I had to reopen and retighten the OPV as it screwed into the base because I didn’t tighten enough the first time. Pictures of some key steps are below.

Good job! FYI. That"s not a steam safety valve. It is and OPV. Over pressure valve. Each pump, steam boiler fill and coffee boiler fill, has an OPV on it. There is a spring and a ball in it. When the water pressure hits the set pressure, the valve opens and lets the excess pressure water back into the tank. You can adjust the pressure it releases by taking the collar with the clips off, and screwing the relief port in or out. Enthusiasts adjust the OPV on their coffee boiler pump. Most leave the one on the steam pump at The factory setting. In a sense it is a safety valve but more of a steam pump fill safety valve.

There is a legit over pressure relief valve on the top of the steam boiler that vents to the drip tray in the event that the steam boiler heaters go berserk and over heat and over pressurize the steam boiler. It is in the center top of the steam boiler and has a fat clear tube coming out of it. This valve can cause problems with certain machines (it can get stuck open) but I have never heard of a problem with it on the BDB. You may see condensation in the tube that comes off this valve. Don"t worry. It is a combined pressure relief valve and vacuum breaker valve. The condensation comes from it doing it"s job as a vacuum breaker. Perfectly normal.

The Fast Slow Pro from Breville allows you to slow cook, pressure cook, and more in a single appliance. The cooker features six Smart settings: Pressure Cook, Slow Cook, Steam, Sear, Saute, and Reduce.

Safety features include a safety locking lid, safety valve, and pressure release button. The Fast Slow Pro offers three steam release methods: Auto Quick, Auto Pulse, and Natural.

desertcart is the best online shopping platform where you can buy Safety Valve For Various Breville Espresso Machines from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the Safety Valve For Various Breville Espresso Machines to and more cities in INDIA. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Safety Valve For Various Breville Espresso Machines speedily without the hassle of shipping, customs or duties.

desertcart buys Safety Valve For Various Breville Espresso Machines directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy Safety Valve For Various Breville Espresso Machines from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

This valve attaches directly to the main water pumps. it functions to regulate water pressure/flow by diverting some of the water back to the tank. It is adjustable but they commonly leak or divert too much water or not enough. Best to replace this part if you have a flow issue.